Database Develop

active sync via bluetooth?

Hi,
My cradle is broken .I want to activesync with bluetooth.when I do it,the desktop does not recognise my xdaiis.i did enable the blutooth on and ran the bluesoli software on my desktop with the blutooth dongle plugged into the usb.what might be the problem? blutooth file transfer works fine,and private network also works,but my blutooth headphone motorola h-500 just gives out static when i want to make a call.can any one help me plz?
ROM-1.31.00 WWE
ROM ver-1.02.00

could it be the bluetooth version on the pda?????????

You need to configure ActiveSync to use one of BlueSoleil's COM ports.

configure activesync
How do I do that? can you give a step by step turorial? would appreciate your help.
thanks
rgds
mukund
India

figured out the way........
First enable the blutooth on the BA.start the bluesolei software on the desktop/laptop and let it discover the BS.now start tehe active sync on blutooth from the BA,making sure that the COM ports are the same on the BA and the desktop,bango blutooth activesync is connected!!!!
thanks guys
mukund

Bluetooth Internet Connection

Anyone can help me to use bluetooth and internet with my desktop pc?
TYVM

Are you talking about using your TyTN II as a modem to connect to the internet through your PC?
If so, is your PC running XP or Vista? And is it wirelessly enabled or do you need a bluetooth dongle for your PC to recognise othe bluetooth devices?

Nopes, i mean in the past in my old palm tx with a bluetooth adaptor plug to my pc i use internet with a pan connection i think, that can be done with the tytn II?

To use device to connect : Just turn on Internet Connection SHaring on your device (selecting BT) and then connect to it as a BTPAN on pc
To use pc to shre web with device, just connect activesync over BT and the device can then use the pc's web connection.

Hi, where can i find "internet conection sharing"
using wm6

its internet sharing and you can find it on programs menu

How do i share PPC wifi internet connection to Desktop PC

I have already search this site/ it doesn't give me solution for what i need to do, or i haven't understood what it really says. so please bear and help me if possible.
Situation is -
Two desktop PC
One Kaiser
PC-1 is connected to Dial-up Internet
Wifi Router (D-link) attached to PC-1 for Kaiser's Internet access
I need to use My wifi transmitted Internet signal in to Desktop PC 2 (I don't want to install additional Wifi Lan card in PC-2)
I want to use kaiser's Wifi + Activesync to use the internet on PC-2
Is it possible ???
Thanks

1) Activesync internet passthrough only works the other way
2) If you are prepared to do a reg hack, then you can share your internet connection using ICS from your device to your pc (as it only works via BT or USB normally).
BUT you will need to undo the hack whenever you want to use it any other way...
3) It would be a hell of a lot simpler to buy a USB wifi dongle for second pc though...

Thanks
Thanks for info

These might help you.
http://forum.xda-developers.com/showthread.php?t=341398
http://www.jongma.org/WMWifiRouter/

BT Internet sharing problem

Hi to all,
i'm trying to share my internet connection through bluetooth with my notebook but the connection doesn't work.
I follow the same working procedure used on Tytn, but with Diamond the notebook cannot surf on internet.
It connects with Diamond, get the ip (192.168.0.2) but is unable to open any site.
Diamond connection working perfect and works also if i try to establish connection through usb with notebook.
Any ideas ?
Kriminal

Access Internet on Kaiser via PC

Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions

Not sure that Internet Connection sharing in WinMo supports that...just wondering, why the heck would you want to surf the web on a 2.8" screen when you have a full PC available to you?

You can use the remote desktop facility via wifi. But as previously posted... why?! Bluetooth doesn't support a high enough datarate for it to work properly.

Connection at my location is 3G at best so bluetooth is defininitaly fast enough to accomidate my needs just simple stuff.

metalman0581 said:
Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Click to expand...
Click to collapse
The best way to get the connection on your kaiser throught the pc is when you connect it using the USB and being connected to the active sync on your pc besides there are no settings need to be made for using this way. I'm not sure if you can connect the kaiser to you active sync on the pc through the bluetooth.anyway let me try it and if anything pops up, i'll let you know

Nope, no additional software required. Just go into Start - Programs - Internet Sharing. Hit connect and connect up your USB cable and you're done.
_Wait for ActiveSync to connect and then exit the programme._________________

Max confusion
What a jumble this thread has become . The O/P wanted to access the internet that's already on his PC and channel that through his TyTN II - NOT the other way around. As already mentioned in one post, one way of getting this is via an Activesync (or WMDC if it's Vista or Win 7 on the PC) connection. For greatest speed this would be via the USB cable but it is possible to have an Activesync or WMDC connection via Bluetooth for greater mobility if there's a need to carry the phone up to 10 m from the bluetooth hub. The other (more straight forward) way to do this is just to connect the phone via WiFi directly to the landline/broadband router (assuming there is a WiFi capable router avail).
Internet connection sharing is only for when the phones internet connection eg GSM/3G or HSDPA is feed to a desktop PC (say if the landline/broadband connection is down). In the O/Ps second post, the reference to Bluetooth speeds made it look like this was what was being saught.
I have done all of these with my TyTN II and had things working well in each case.