Database Develop

blue tooth activesync and cingular 8125

Need help. Trying to set up blue tooth on cingular 8125. Just bought new kensington bt and it set up serial com as com 4 and 5. The phone only gives u the option of com 6 and com 7. Any ideas? The BT does connect to phone but activesync cant find phone. Tried activsync 4.1 and 4.2. Thanks in advance for help.

I'm having the same trouble. i scoured this and other forums but can't find any info on this problem. I think we may need to upgrade the rom on our phones. I'm still running the stock rom and i think if we upgrade that might correct the problem.

I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.

bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.

ktwildchild said:
bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.
Click to expand...
Click to collapse
If you guys still have problems with this after let me know. I played with this for a few hours about a month ago and could retrace my steps. A couple of phone reboots after setting up the ports helped

Just to add, I noticed that once I upgraded the ROM to Summiter's 2.25 I was able to walk out of BT range and when I returned re-sync via ActiveSync without doing a soft-reset of the phone.
As SK7575 said, be sure to post there are plenty of folks using this connectivty option and it does work....

And I had this working - nicely syncing between my cingular 8125 and laptop via BT!!
But then I tried to get my 8125 to connect to my new wireless network - which did not work - and in the process of trying everything I must have broken something, because now after trying everything imaginable I just never see that activesync service on my 8125 any more.
The last I tried was to remove all the BT serial ports from device manager after deleting them from the HP bluetooth neighborhood (I have a bigger HP laptop with built in BT).
Then rebootet and four new BT ports were found and installed. Then I told the HP software to make a new incoming port (they call it service) and got COM 5. Then I told activesync on the PC to use COM5 for syncing.
Made sure all pairing was removed. booted both the HTC and PC - paired the two - bang - no 'activesync' service.
Now I am running out of options especially as I don't know how to un- and reinstall the HP software that comes with the laptop.
Any ideas?
Thanks
Gunter

I also have the HP BT stack on my laptop and ActiveStink does not sync with my MDA.
Any answers here, may help get me synced via BT.
Is the trick to see which USB port comes alive when I connect MDA via USB?
and use that on my PC for ActiveSync to listen to via BT on my laptop?
Thanks
--
NB

I'd be glad to hear if someone has the Belkin F8T012 USB dongle and that they have that working with bluetooth ActiveStink.
'Cause everything I've tried, I never ever see the "Activesync" profile appear on my device when pairing, I only see an available Serial Port.
Does anyone know the details of how that active sync profile is cretaed on the 'puter? If I could troubleshoot from that angle, I bet I'd have it working...
-Chuck

Can sync via USB but not via Bluetooth

Am setting up my Tytn II with a new Toshiba Satellite Pro U300 laptop. I have no problem with syncing via USB but cannot get Windows Mobile Device Center to see the device via Bluetooth.
Half the problem may be the Toshiba Bluetooth software, which takes over the standard MS bluetooth software, although I managed to use the Tytn to share an internet connection without much fuss.
On the handset, when I pair it with the PC it sets up a COM port (COM9) and Wireless Stereo support - should it have another option under Partnership settings or something?
On the PC it sets up a dial up networking connection and a Network Access (PAN) connction, both of which seem to work fine. I can browse the Bluetooth shared folder on the phone or PC without problem, so what am I missing with regards to syncing???
Any ideas would be appreciated, but please document it clearly as I am sure I am missing something obvious.
Thanks in advance
Martin B

Try this, step by step, it worked for me perfectly!
http://forum.xda-developers.com/showthread.php?t=340954

Sync with bluetooth

I like to sync my Diamond with my Vista-computer and " Center for Windows Mobile devices" through Bluetooth.
I have a working connection with USB already, but want to skip the cable.
I can pair the computer with my Diamond but the only services I get on the Diamond is "wireless stereo" and "serial port".
Been trying to read every instruction on both the bluetooth connection in Vista and on the Diamond but it seems I cant get the service-choice I need to be able to sync my outlook and so on.
Any suggestions on how to get my bluetooth connection working?

Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html

studz said:
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
Click to expand...
Click to collapse
Thanks for the link but when I get to page 11 step 16 in the pdf it says you should get wireless stereo and Active sync. I get wireless stereo and serial port as my choices.
Don´t know if that´s because I use Vista and Center for Windows Mobile Devices (The new version that has replaced Active sync in Vista and that should make it soooooo easy to connect mobile devices instead of Active Sync.

I'm guessing you're using the default Microsoft Bluetooth stack with Vista? If so, ActiveSync should be available when you pair your phone with your PC. If not, check the Services tab for the phone in Vista's BT manager applet, it may need to be ticked in there.
I use BlueTooth with WMDC all the time with my Diamond and it was as simple as pairing then going into ActiveSync on the phone and selecting Connect via Bluetooth.

I´m not sure what bluetooth stack I´m using. I think it´s Toshibas but how can I check that?
I had to install Toshibas application to get the drivers for my bluetooth device and I think a got the stack at the same time.
Is there a way to shift stack if I use Toshibas instead of Vistas default?
Please take a look at the attachement to see my gui for bluetooth, and the Center for MobileDevices (Instead of Active sync) on my Vista machine, and what happens when I connect my Diamond through Bluetooth. Sorry about the language but it tries to install the Diamond as a Bluetooth modem and that´s the only thing I seems to be able to install.

Big problem with Activesync by Bluetooth

I have a problem trying to connect to ActiveSync by bluetooth .
When I pair diamond to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me

I had this problem.
You have to pair the PC to the Diamond. ie search for the device on your PC then pair. (Unpair the origonal setup first)
Hope this helps

I had this problem. Until I activated Bluetooth PAN (networking) on my desktop PC. After this "Active Sync" was available when pairing the device.

The issue have been resloved,I modify the Register, change serial port to ActiveSync

Sorry if this has already been answered I have been searching the forums to no avail.
Has anyone come up with a programme that will connect to activesync when in bluetooth proximity without having to click on the "connect via bluetooth" similar to the way Nokia phones can ?

Bluetooth

Hello,
(noob doesnt understand)
I have an bluetooth dongle pluged on mij notebook, i have installed active sync, i have bleutooth on, and device visable. My diamond is able to see notebook and my notebook is able to see my device.
wy isnt it possible for me to sync my device -- notebook with bluetooth.
i only get the massage that my diamond cant find a bleutooth partnesship with a activesync pc.
Is there anyone how can help me out???
Sorry for my bad english
regards,
arjan

sounds like you did not add the activesync profile when you bunded the phone and the
computer over bluetooth add devices

Rudegar said:
sounds like you did not add the activesync profile when you bunded the phone and the
computer over bluetooth add devices
Click to expand...
Click to collapse
i traid to do that like discribed in the guide. maybe i did something wrong but i dont know what.