AFTER i put in the new rom 1.93 my screen got a small shaking or a bit flashing but normal again when i press the power button to sleep and on it back . it there problem with my vga screen?
reflash original SPL or use Hard-SPL 1.40
i did a search where can i find the original SPL or use Hard-SPL 1.40
Same for me, but what does it matter if it clears with one power on/off? I won't be reflashing anything in a hurry to correct it unless it decides to get worse. For me it was after flashing usnsigned hard spl. It rattled my nerves.
Related
I updated to wm5 last night and then i went to update the radio from 1.12 to 1.13 and came back to my phone and the phone has no power. Soft and Hard reset doesn't work and i have a blank screen.The only time there is a light on is when i put it on the cradle.There is a redish orange light under the power button.Is there anything i can do to fix this or is my phone a paper weight?If you can please HELPME!!!! Thanx LuXx
I got it to work. Thanks
solution
Do you remember what steps you took to fix it? I have the same problem. Thanks!
You sure that you not in bootlader mode.....The screen is dark but has wording on it.
If so just rerun the upgrade
So, I have updated my ROM many a time, and was updating my qtek wizard with the 2.17 WWE rom, at 3% through, my PC does a Blue Screen of death... Now my wizard is just locked at the Color Bar screen saying IPL 2.17 and SPL 2.17.
DID I KILL IT?
sdattilo said:
So, I have updated my ROM many a time, and was updating my qtek wizard with the 2.17 WWE rom, at 3% through, my PC does a Blue Screen of death... Now my wizard is just locked at the Color Bar screen saying IPL 2.17 and SPL 2.17.
DID I KILL IT?
Click to expand...
Click to collapse
No you didn't kill it. =)
Take the battery out, and put it back in.
Hold down the Camera button while pressing the power button
You should be back to the three color bar screen
Connect to your PC using the USB cable
Run ROM upgrade
That should fix it. Make sure you don't have anything running on your PC during the upgrade. The only time I've ever bluescreened during a ROM upgrade is when I was playing MP3s in the background.
summiter said:
sdattilo said:
So, I have updated my ROM many a time, and was updating my qtek wizard with the 2.17 WWE rom, at 3% through, my PC does a Blue Screen of death... Now my wizard is just locked at the Color Bar screen saying IPL 2.17 and SPL 2.17.
DID I KILL IT?
Click to expand...
Click to collapse
No you didn't kill it. =)
Take the battery out, and put it back in.
Hold down the Camera button while pressing the power button
You should be back to the three color bar screen
Connect to your PC using the USB cable
Run ROM upgrade
That should fix it. Make sure you don't have anything running on your PC during the upgrade. The only time I've ever bluescreened during a ROM upgrade is when I was playing MP3s in the background.
Click to expand...
Click to collapse
Exactly this solution works fine with me!
three color bars on tmobile MDA
Hi,
I tried a hard reset with pressing camera button and power button together but it comes on with a three color bars
RRU
IPL 1.01
SPL 2.26
USB
But while flashing new ROM it says there is a connection problem with the PDA and yes, it does not show connected on Active Snyc 4.5...
Any help how to flush it with any ROM. I also tried to download the Tmobile software but it agains says the phone is not connected with USB.
When I connect the phone wiht USB, computer makes beep like somthing is connected....I can not figureout what is wrong.....any help???
thnx
I've had the Kaiser for a few weeks now and I like it and all but, I'm used to the OEM screen instead of the Hard SPL one with the clock and the different icons in the today screen. So is there a way to get it out? I flashed it with multiple ROMS and none of them seem to do the trick.
BTW- On the Tri-Color Screen, it says the following
KAIS1*0
SPL- 3.29.Hard
CPLD-8
and the bootup screen says
R 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Thanks.
I think you mean HTC Home...
like the man above said i think you mean htc home
i just would like to add to leave hard spl on
hard spl is safer then the org spl
hard spl is the back bone of your device there is no icon or screen that make it look different the only change is the .Hard in the tricolor screen
you could just uncheck it from the today screen
start/ settings/ today/ items/ uncheck htc home
if you want to bring it back to stock look here
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
for your rom (this will wipe your phone clean)
read this before you brick your phone.
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
yea thanks i got it mixed up. but i was wondering if i could have just remove the htc home in general. i even flashed it to the at&t oem rom and it still didn't get it removed. any other help is appreciated. thanks.
Was using Dutty's latest Kaiser ROM, had a problem with it after installation: when pushing the power button on the side to sleep the phone the light would turn off for about 2 seconds, then the phone would wake back up. The only way it would turn off the screen and sleep is via normal inactivity time period.
Just installed new Ruppy ROM, (spl 3.56 and neon 1.58.25.17 radio) to see if the problem would replicate, and it still does.
Anyone had this problem with their phone?
I've had this problem for months. I've flashed a dozen different ROM's had both 3.29 and 3.56 Hard SPL (jocky) and nothing fixes it. The problem was originally posted in ROM development but one of the senior MODs moved it but I think those guys who know the programming inside and out would be the best to help us fix this.........
THe only thing I've been able to do is load S2U2 to keep it from dialing or activating programs when it turns itself back on.
Hi everybody,
due to warranty reasons (crack in case, display and buttons in the front panel stopped working and the problems with the hardware keyboard) I need to flash the original SPL back and get rid of olinex. I already flashed the Original ROM, but with the SPL I failed since I can't see the screen or use the front buttons.
After flashing the original ROM I was able to get a connection from my pc to the X1 via Pocket Controller and also I got a USB connection. A real Activesync connection was not (yet?) established. With Pocket Controller I get to the point where I have to initialize the touch screen and tap on the x at the different locations. The emulation with pocket controller doesn't work here and as I said, the screen itself is dark and not working.
Does anybody have an idea how I get the original SPL back on my diamond with the above described setting??
Thanks in advance!! Help is very appreciated since I have to decide to brick the device or try somehow to get a warranty repair...
Regards,
Stefan
No ideas? Anybody?
I would like to know if it is possible at all to flash the SPL without screen?
Please, I need to decide to get my device back for money or brick it until this weekend.
Help would be appreciated! Thanks!
Sincerely,
Stefan
Probably posted in the wrong folder?
You get stock at Screen Alignment?
The Last Roms of Valkyrie (Leo) I flashed did not require a screen Alignment. It just went to Customisation.
Then you may get an AS connection. Accept the SPL by pressing the hardware key .
I hope it helps.
If it doesnt work you should ask in general dev and hacking forum.
Turn off the mobile and remove the batery. Put it back and press (power) and (Vol down) for min 10 sec.
Push the powerbutten for a second.
Connect the mobile with USB and try to reflash SLP.
It worked for me!!