Database Develop

UNLOCKin...Kaiser/Tilt & HSDPA

HI Folk
got a problem unlockin' a TILT using the Super CID tool...it doesn't work...gets stuck on first screen...is it the most efficient way available?
NO HSDPA PANEL IN CONNECTIONS TAB on a ATT tilt...but IN there in HTC with WM6 PRO

Does this happen?
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
Click to expand...
Click to collapse
do you get SPL-1.0 OliPof?

tried many times...but doesn't work
it gets stuck on white screen...with percentage bar....(doing this via usb) still on SPL 1.56...luckily reboots ok!

well for me everything ran fine except for it never displayed "Security unlocked" at bootloader while running wm6.1. However once i downgraded to wm6 everything worked fine ... see if this helps you

ReverseImage said:
it gets stuck on white screen...with percentage bar....(doing this via usb) still on SPL 1.56...luckily reboots ok!
Click to expand...
Click to collapse
Using Vista ??

It Was Tough
but after a day & half.....and many tries...had to dig a lot to find solutions
Thanks Everyone

Mod Note: This question should have been posted in the SIMunlocker thread in the ROM Development Forum.
New thread for existing issue is a no-no.

I Think I Messed Up My Tilt While Unlocking Help!!

ah! i was using the unlocking program from the forums to unlock my tilt. i got to the 2nd step. and then from the 2nd step when it was restarting it showed the att start up then the 3g start up then it stays on a black screeen. i took out the battery and tried again and same thing. it stays on the black screen. i even reset the phone and same thing! idk what to do!! please help!

cid or sim unlock?
If it is the sim unlocker, which I think you are using the second step is to check your radio. Therefore, this is occurring possibly because you installed hardspl. Try a hard reset then search this thread:
http://forum.xda-developers.com/showthread.php?t=334679

yes i was doing the sim unlock. idk how installed hardspl. (im farely new to the whole windows mobile deal)... i tried doing the hard reset but it does the same thing. (hard reset = green button, red button and power button all at same time?)

no that does not equal hard reset. Didn't we go over this with you already?
Hold down both soft keys and insert stylus. soft keys are the two keys that have horizontal lines or dash whatever you want to call it. So hold those two down then insert stylus. You will receiving a warning. When you receiving this warning hit the green button. Then you will receive a notification to hit the green button again (the send key).

i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?

Somekid said:
i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?
Click to expand...
Click to collapse
I had the same problem u have to flash your original rom back to normal for evrything to go back, hard reset wont work.

Just stumbled on this thread as well so I thought i'd add a little information. I had this Exact same problem. Black screen after step 2. I went ahead and tried to do the 'unlock' of the phone even though i couldn't see anything. I dont know if it worked or not, but whatever. Did a reset, still black.
So I went ahead and flashed HardSPL 3.29, still black as I expected.
I THEN installed a WM 6.1 cooked rom that requested said HardSPL to be precise it was this one http://forum.xda-developers.com/showthread.php?t=416276
Anywho after flashing that rom, everything was good again, the screen worked as it should etc.
My guess was that the Hard SPL was screwing things up because my phone was still on the original ATT WM 6 rom.
Anywho, all is well. I hope this helps someone else down the road.
MF

VGA screen abit shaking ?

AFTER i put in the new rom 1.93 my screen got a small shaking or a bit flashing but normal again when i press the power button to sleep and on it back . it there problem with my vga screen?

reflash original SPL or use Hard-SPL 1.40

i did a search where can i find the original SPL or use Hard-SPL 1.40

Same for me, but what does it matter if it clears with one power on/off? I won't be reflashing anything in a hurry to correct it unless it decides to get worse. For me it was after flashing usnsigned hard spl. It rattled my nerves.

I Unbricked my 8125

Ok, I know not everyone will have a similar situation and maybe my post is quite late since many might have moved on to other nicer phones ;-)
I was uploading ROM using ShellTool that takes awfully long and my PC (an XP) decided to download updates and reboot all by itself. Needless to say, I was stuck at the boot screen with the IPL, SPL, GSM and the OS screen. The OS was showing 6.0.0.1 and that's it. pressing the Voice Dial and COMM button and resetting didn't help. So out of frustration, I pressed the Camera and Voice Dial buttons and did a reset and Presto, got the Red, Green, Blue with USB screen. I was able to load ATT's WM5 on it. Am sure many will like to know this minor pleasant mishap.
Hard Reset is mentioned here http://www.pocketpccentral.net/help/cingular/8125reset.htm
I would call my trick as the Hard Wiping

ak2k8 said:
Ok, I know not everyone will have a similar situation and maybe my post is quite late since many might have moved on to other nicer phones ;-)
I was uploading ROM using ShellTool that takes awfully long and my PC (an XP) decided to download updates and reboot all by itself. Needless to say, I was stuck at the boot screen with the IPL, SPL, GSM and the OS screen. The OS was showing 6.0.0.1 and that's it. pressing the Voice Dial and COMM button and resetting didn't help. So out of frustration, I pressed the Camera and Voice Dial buttons and did a reset and Presto, got the Red, Green, Blue with USB screen. I was able to load ATT's WM5 on it. Am sure many will like to know this minor pleasant mishap.
Hard Reset is mentioned here http://www.pocketpccentral.net/help/cingular/8125reset.htm
I would call my trick as the Hard Wiping
Click to expand...
Click to collapse
It's not a trick, it is called the RGB bootscreen.

not same as RGB, the actual boot.
well, all I got stuck was at the boot screen, not the RGB screen, the screen that just shows the IPL, SPL, GSM and OS numbers with the Cingular screen. I did not find anywhere that showed me to get out of the screen till I accidentally came across it. Actually, the record button is not necessary, just the camera button is fine while pressing the reset and holding it till the RGB screen is back.

Where did you get AT&T's WM5 rom, I am having the same problem. I have the IPL/SPL but can't find the rom, the link in the thread here no longer works.
Thanks.

Need Help, Please!!!

Hello,
This is my first thread on XDA, because i'm having a problem with my Kaiser.
I'm sorry for my possible "silly" questions, but this a subject wich i'm not very good at.
I have a Kaiser, wich has a TPC Elite Rom Series
R 1.70.19.09
g 25.83.40.02h
d 3.28.00.00
And that runs on WM 6.5
Since last friday while i was configuring my mms settings, the device asked me to restart to assume the new settings. So i closed it down by pressing the power button until the message to "shut it down" appeared.
But when i tried to turn it on again, the device starts with the TPC Elite Rom Series screen, then it appears the data from the rom (mentioned above), then it moves to a screen with the Windows Phone message and logo and it stays here until i turn it off again.
So i cannot start my Kaiser and i need all the help i can get.
Thanks a lot to all of you that can give me a hand.
I already have done hard reset, but it keeps freezing on the "windows phone" screen.

try into three-colour screen and reflash ROM,or look here http://forum.xda-developers.com/showthread.php?t=423486
goodluck!

try into three-colour screen and reflash ROM,goodluck

this is also my first post here, can someone please help.
i tried to hardspl my htc kaiser, and failed miserably. i went through all the steps for hardspl but somewhere failed. during the setup when running the kaiser ruu file.on the cpu it said it was complete and for me to look to the phone to finish setup. on the phone it showed the linux penguin and a list of words scrolling down the screen. then it said error insert sd card. so i did then more words scrolled down the screen. then it said error again then the screen went black. after waiting an hour and nothing happened i took the battery out. then i tried to reload and the att logo would only show up. i read online how to get the tri colored screen back up and i got that by pressing the camera and power and reset button in.on the screen it says
kais1*0
spl-3.56.0000
cpld-8
and it doesnt respond to the computer. how do i re flash and get my phone working again someone please help if you can thank you