Database Develop

WiFi Connection problem Need Help

hi everybody;
i am having a problem with my wifi. by enabling it shows all the connections but never connect with any of the available network routers. if i try to connect with one, it ask the key. after applying the key it never respond.
wifi status shows available or unvailable not connected
i m using t-mobile mda uk
spl / ipl 2.06
radio 2.61.1
os xda m6r5

I have the same issue... i have tried with 3 different networks now.
It says they are available, prompts for security key, and then says connecting for a moment.
The all it does is either say 'Unavailable' or 'Available', but never connects!

When did you start having this problem? I am having a similar problem after I install WM5SE rev 5.0 rom.

It appears no one wants to help or maybe its a new issue or its very much common. anyways maybe i should try any other rom. perhaps this could do the job.

i have solved my problem, don't know if yours is the same. try setting the battery life on wifi to best performance... worked for me!

....
Try open your resco registry/other registry tool, find the key "AutoCfg" n then set it from '0' to '1' .
it worked for me (wm5), but you must backup before...

submantom said:
i have solved my problem, don't know if yours is the same. try setting the battery life on wifi to best performance... worked for me!
Click to expand...
Click to collapse
good to hear that. can u please send me ur phone wifi settings

[Solved]no network connection - CM 3.9

So I flashed cyanogen's 3.9 experimental ROM when it first dropped and all was well for awhile but I lost my ability to connect to 2G/3G about 24 hours ago. I've reflashed my radio image and that didn't fix things. I wiped and flashed 3.9 again and got stuck at the setup screen. reverted back to my nandroid backup (so I could use the phone at least) and started poking around in the settings revealed by the "secret code" posted by haykuro yesterday.
I've attached screenshots of the phone information settings page (reached by dialing *#*#4636#*#*), can anyone explain the errors I receive for ping test? And is my phone set up correctly for TMobile service? I am in a 3G coverage area.
I've set my radio band to Automatic, hit "Enable data connection via the "More" dialogue etc.
I've even added two new TMobile apns as suggested by overpower and still no data connection.
Any help in getting this sorted would be greatly appreciated, I'm kind of crippled right now.
Thanks in advance - innerspace

attention modulators...
mods, I guess you can kill this thread. G1 mysteriously rebooted itself and voila, 3g connectivity again.

Gotta love reboots as they can help solve a few things, much like a wipe.
Could you edit the title to include "[Solved]" please to alert mods and everyone else? Thanks.

NeoBlade said:
Gotta love reboots as they can help solve a few things, much like a wipe.
Could you edit the title to include "[Solved]" please to alert mods and everyone else? Thanks.
Click to expand...
Click to collapse
Sure thing, will do that from this point forth.

Milestone Wi-fi/3G connects but not send data

Hello there,
As a newcomer, I found out these foruns filled up with great information and guys willing to help, so came here to ask for some help ....I am both excited and dissapointed with my brand new Milestone. Bought the handset about 5 days ago, which came with Android 2.0. Then updated it straight away to version 2.1 via "Motorola Software Update". So far so good ...here´s the problem I am facing :
While connected to wi-fi or 3g(issue is easier to notice due to 3G icon at the task bar, which points out in those small arrows data that is being sent/received) phone stops to receive data out of the blue. All connectios are cut off(it also happens when the handset is locked up). Some basic trouble shooting i did:
- tested all pcs connected to the same wi-fi network. No issues detected for these
- reset wi-fi router configs. Didn´t work
- tried other wi-fi router. Presented same issue
- swapped another carrier chip to test 3g connection. Presented the same issue
- tested my GSM chip on ther phone. Worked properly
- Reset phone to default settings. This time the connection took longer to drop, like 30 minutes, instead of the usual 10 minutes. After the first drop, it´s started behaving the same way again.​
It seems pretty much that there an issue going on here (obvious...hehehe). I am considering the following:
- Might be a software issue. So, right now i am downgrading it back to 2.0 version, check if it works properly and then move to 2.1 hopping to get the issue fixed.
- Use retailer warranty and claim for a new phone =/​
Could you guys help me out ??
Thanks in advance and Best Regards !!!

Guys, after downgrading version to 2.0, phone stills presenting the same issue. I think it´s turning into hardware issue =/....does anyone have a clue about it?
Thanks and Best Regards!!!

[Q] Can't get Wifi to work with any ROM

I have a Vodafone version of this phone. I think the previous owner messed about twith the SPL because when I got it, it had a generic ROM on it.
Anyway I've tried several Android versions found in this forum and all of which work fine except for Wifi. Yes I have enabled Wifi in Winmo before booting into Android.
What happens is I can enable Wifi in the settings, it then sais "scanning" where the on/of tick is (not below where the networks shoudl show up). It stays like that for ever. If I enable/disable Wifi a few times then after a while it sais "Error" where it said scanning before and doesn't allow me to enable Wifi anymore.
What could be the problem?

GIR said:
I have a Vodafone version of this phone. I think the previous owner messed about twith the SPL because when I got it, it had a generic ROM on it.
Anyway I've tried several Android versions found in this forum and all of which work fine except for Wifi. Yes I have enabled Wifi in Winmo before booting into Android.
What happens is I can enable Wifi in the settings, it then sais "scanning" where the on/of tick is (not below where the networks shoudl show up). It stays like that for ever. If I enable/disable Wifi a few times then after a while it sais "Error" where it said scanning before and doesn't allow me to enable Wifi anymore.
What could be the problem?
Click to expand...
Click to collapse
Well... hum. Did you read the FAQ?
I just realized that's in the RHOD section of the FAQ, so perhaps you missed it - and originally I thought that was a RHOD-specific issue, but perhaps it's more than just a RHOD issue. See if that fixes it for you - this is only if wifi has never worked, no matter what you've tried.

Update your root-fs file... I too had a similar problem !!
files.xdandroid.com/rootfs/rootfs-latest.zip

android 10 upgrade

Hi guys I'm new on here, i do apologise if i have posted on the wrong area , i have a Chinese 10.1 inch android SPRD head unit with android 10 installed. I have fallen out with the guy i bought it off as there was a lot of miss advertisements on advert which did not match when i got the unit.
However thats another story and wont get into it, what i want to know and if anyone can help me i will really appreciate it as iv tried everything and getting no where. So here are my problems :-
1, Upgrading android 10 to android 11.. there seems to be no menu that has the upgrade option, so how can i upgrade to android 11 or twelve? And How do i upgrade mcu version?
2, im having problems with GPS when car is on i loose gps signal to like half of one bar.. when car/ignition is turned off GPS comes alive and get good signal and catches satellites.. what does this happen? Whats the solution?
3, i cant change the icons on home screen, cant change/add on tool bar, no bluetooth button to turn on and off on bar on top of screen.. but blue tooth is there works fine when connecting phone and bluetooth icon shows on top bar when connected..
4, the android version seems very limited on this unit, even in developer settings there dont seem to be many adjustments options to turn on or off.. i have a meter display shows cars rom gauge and speedometer its all im KM and there is no options anywhere to change this..
I have attached pictures of GPS ignition off and one of ignition on.. also all the build software info pictures too..
Any help would be appreciated

Not (Android Automotive) requested moderator move to (FYT) forum.
Op. Unit is UIS7862 FYT based.