is there a way anyone can add more then the default 18 programs into the programs tab in tf3d
thanx guys
anyone????
Go to your registry: HKLM\Software\HTC\Manila\ProgrammLauncher\
There are entries from 0 to 17, you could add more but some ppl report problems with it!
k thank you
how do i add more entries???
What would be super-neat is if you could add a tab for each swipe, so a left swipe gave you another page, up swipe, down swipe and right swipe all gave their own page as well.
You could have office stuff-up, system stuff-down, fun stuff-right, media stuff-left or something. That'd rock.
No idea if thats possible though, I couldn't code my way out of a wet paper bag :>
Cheers for the tip, i'll try it.
riverer said:
What would be super-neat is if you could add a tab for each swipe, so a left swipe gave you another page, up swipe, down swipe and right swipe all gave their own page as well.
You could have office stuff-up, system stuff-down, fun stuff-right, media stuff-left or something. That'd rock.
Click to expand...
Click to collapse
That would be really great! Maybe someone can do this. I'm not familiar with programming for win mobile.
i would love for someone to answer my question!
I didn't figure out how to add them either, looked a bit complicated to me. If you could copy-paste-rename the entries already there it'd be easy but me reg-editer didn't allow me to do that.
same with mine :-( please someone help!!! with a link to a better reg editor
Not as easy though
htcfanboi said:
same with mine :-( please someone help!!! with a link to a better reg editor
Click to expand...
Click to collapse
Hi guys,
I just tested this , if you add new Keys (18/19 etc ) to the registry , tf3d will
display the additional empty slots , will allow you to select a program for them , but will not
save your changes ... i.e. these will always remain empty .....
Even if you change it from the registry and add a program in a new slot manually .... tf3d will ignore that
So there must be a different place ( or hardcoded in manila.exe ) which needs changing too
i dont understand what you are saying???
htcfanboi said:
i dont understand what you are saying???
Click to expand...
Click to collapse
Huh , I didn't think my english was that bad
If you edit the registry and add Keys for additional buttons , TF3D will show them ( as empty ) but they will not work ... I.E. you can't assign any program to the buttons you added
So the registry hack alone is not enuff
Garfield1970 said:
Huh , I didn't think my english was that bad
If you edit the registry and add Keys for additional buttons , TF3D will show them ( as empty ) but they will not work ... I.E. you can't assign any program to the buttons you added
So the registry hack alone is not enuff
Click to expand...
Click to collapse
Your english was perfectly fine
ok but may i ask what registry edit you used
Related
i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.
woow, does it work on any Device ??
I installed it, nothing shows up in the today screen. I've tried to play around to make the cube show but nothing happens.
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
herg62123 said:
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
Click to expand...
Click to collapse
Nice it work after I configure it.
EDIT: Anyway to change it from Spanish to English?
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
ladytoast said:
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
Click to expand...
Click to collapse
Haha yeah herramientas mean Tools in Spanish.
I had to remove this program because it was messing up with the slide 2 unlock program.
Sensational find, well done
The program works great and has a huge coolness index factor....
I tried to set the photos to open a file in the storage card and would not do it. Is it limited to opening files that are only in the device memory? Can it address files in the sorage card?
Nice program overall.
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
taiseer999 said:
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
Click to expand...
Click to collapse
Well, just un-installed the Spanish version and installed this. Appears to work perfectly, I can't see any problems at the moment. I had to rename the FTouchFlo folder so that the configuration tool would work but other than that this was too easy.
First class work!!
go into config cube and all word editing done from there.
found 6 side cube vista like and settings to change the programs
herg62123 said:
found 6 side cube vista like and settings to change the programs
Click to expand...
Click to collapse
.... but not working on Kaiser!
TQM
Hi,
just one question: does the TouchFLO CUBE work on the TYTN II ?
I heard that on Tytn II it needs a cooked ROM not just a sw on top of already installe TouchFLO.
Could somebody tell me something ?
Thanks in advance
works perfectly after configuring it, gotta get use to the spanish though but i guess im taking it as a humor thing LOL
hi i have problem with the ftouchflo after installing it .....
i do have a problem with the text on mine, i mean in office words and messaging,
I cant select the text (that is to use stylus click drag a paragraph of text) to be copy and paste or something like that.......... i cannot select the whole text...maybe u can help me?? this applies in excel,words, messaging, notes, task ...but in appointment i can select a few text.......................also in resco explorer, normally i can click drag and select a few files to multiple delete (and no i dont wanna use the multi seelect, its extra buttons..)
and btw i have added all the above mentioned files intothe config for exclusion of scrolling and stuffs..........so maybe u can help me? thanx alot
I think the touchcube thing is cool, but i would rather it only works on the homescreen, its just annoying anytime else, when trying to do daily activities and you bring up the cube or minimize the program. can this be done?
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
fluxs2 said:
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
Click to expand...
Click to collapse
deinstalled everything for the third time.. did a reinstall.. copied all the folders again to "PRogram Files" and guess what... IT WORKS!!!
Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.
New version at:
http://forum.xda-developers.com/showpost.php?p=2622590&postcount=45
Old version
I'm make a small program, which change current SIP when stylus out of the case and in the case.
Just unzip, and run program. Run again, and you can stop background process.
Settings in registry:
key HKCU\Software\HtcExtFun
value StylusInSipName - string name of SIP when stylus in the case
value StylusOutSipName - string name of SIP when stylus out of the case
example of reg settings (included in attached archive):
Code:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"StylusOutSipName"="Keyboard - VGAKEY"
"StylusInSipName"="TouchPal"
Sorry I messed up im such an idiot!
And would it be possible to change the diamond in some kind of explosive device if the stylus is pulled out and in five times in less than three seconds ?
Hmmm James Bond on TV tonight, sorry for that.
The real question was : what do you call SIP : is it any program ? Does it interfere with the "notes" opening during a call ?
SIP = "Soft Input Panel"
It's the method of inputting text on a ppc, such as keyboard, transcriber etc...
Thanks a lot exidler, I've been missing this feature
My question is will it interfere/conflict with a SmartSIP application? I'm not in the mood for a Hard Reset just now due to conflicting SIPs...
Hello,
Nice idea but when I execute the HtcExtFun.exe I received this message :
"can't initialize SIP CLSIDs for stylus status"
My Rom is HTC_FRA_1.93.406.1
Thank's for you help
ralfred said:
Hello,
Nice idea but when I execute the HtcExtFun.exe I received this message :
"can't initialize SIP CLSIDs for stylus status"
My Rom is HTC_FRA_1.93.406.1
Thank's for you help
Click to expand...
Click to collapse
Just change the registry keys to whatever SIPs you use. You probably don't even have a "Keyboard - VGAKEY" installed.
2ALL: Also be sure to input localized names for SIPs into reg keys (for non-WWE ROMs). Good luck!
Btw, it works just fine with SmartSIP...
Good job, exidler! Thank you. It's just what I wanted. Will probably uninstall SmartSIP now...
At begining of topic, asking about runing Notes when stylus pulled out.
My question: may be add feature to run something when stylus pulled out? Not only when call in progress.
exidler said:
At begining of topic, asking about runing Notes when stylus pulled out.
My question: may be add feature to run something when stylus pulled out? Not only when call in progress.
Click to expand...
Click to collapse
Would be a nice addition, but I'd prefer it to be user-configurable (on/off), with a list of exceptions. So each time I'm about to rename a file it won't open Notes or whatever.
help stylus
for open the program???
[HKEY_CURRENT_USER\Software\HtcExtFun]
"StylusOutSipName"="Keyboard - VGAKEY"
"StylusInSipName"="TouchPal"
hello graziano
WOW Fantastic app thanks
I Repackaged it in a cab file that adds the reg key to change between Compact QWERTY and Keyboard. Also drops a shortcut under
Start Menu>Programs
Jules
Video of the software here. I think its great, but could obviously do with a configuration panel and having a shortcut dropped into \windows\startup.
http://wmpoweruser.com/?p=739
Surur
ZaJules said:
I Repackaged it in a cab file that adds the reg key to change between Compact QWERTY and Keyboard. Also drops a shortcut under
Start Menu>Programs
Click to expand...
Click to collapse
Really nice, but the shortcut doesn't work.
peterbonge said:
Really nice, but the shortcut doesn't work.
Click to expand...
Click to collapse
It only worked for me after a soft reset, and then starting the app once.
Surur
To have it start at every boot up, paste the app in /Windows/StartUp
Very convenient app, they should have implemented this in the original ROM .
Awesome!...
It worked after I add ZaJules's Reg file.
But I want to be able to switch between:
Compact QWERTY and Fitaly by textware.
I edited the reg location (in windows registry) from keyboard to fitaly
now removing/replacing stylus doesn't do anything...
cheers, stevo.
[edit] Maybe it's called something else in the registry...
[edit] fixed it.
I had "Keyboard Qwerty" insteat of "Keyboard QWERTY", so it IS CAP specific!.
cheers, swesome.... This bl00dy phone just gets better and better every day...!
Updated the cab to include the automated startup
GREAT small application, very handy indeed.
re not go
error on startup
saluti dvdfilm
when using the exidler....cab I got an error while starting up. It seems the application is missing a reference. When I start it manually I get an error about missing reference in registry.
I use original Rom 1.93GER
Hi everyone. I have the HTC Touch Pro and I was wondering if there is a way to let the scroll wheel acts like the one on ipods in order to navigate through the songs instead of finger scrolling. It would be easier and quicker I think.
use the diamond tweak program it has the option to do that
lbhocky19 said:
use the diamond tweak program it has the option to do that
Click to expand...
Click to collapse
Which program?
it is called diamond tweak
i have download it but its kind of complicated the menu.
may be i am too stupid to use it.
chemical349 said:
i have download it but its kind of complicated the menu.
may be i am too stupid to use it.
Click to expand...
Click to collapse
Now Now... we may aswell be nice on this forum... we have members of varying abilities... Remember everyone is special.
Just search for Diamond Tweak... copy the cab to your memory card. double click to install it your device - I suggest you install it on your memory card to save memory on the device itself...
Reset and open the new program (which should be found in your "programs page" near the end of the list you will find the option to set the wheel to scroll.
I hope this helps.
Rgs,
J
thanks man,
i think i was kind of mislead by the previous thread.
the subject was ask about how obtain more function for the scroll wheel and the answer follow seems to be suggesting the tweak.
infact the diamond tweak is much more powerful then just to enhance the scroll function. the other functions was quiet useful indeed.
wish everyone like it as i do.
V.
scroll wheel
lbhocky19 said:
use the diamond tweak program it has the option to do that
Click to expand...
Click to collapse
I also have the touch pro, and have installed the tweek. all programs are enabled to scroll which they all do except file explorer?? any insight??
check out advanced config...open it, go to menu>more settings>smart touch. from there you can add any easily add any active program to enable usage of the smart touch/scroll wheel or see if its listed in the predefined programs. you can also adjust the sensitivity of the scroll wheel here..
scroll wheel
civicvx94 said:
check out advanced config...open it, go to menu>more settings>smart touch. from there you can add any easily add any active program to enable usage of the smart touch/scroll wheel or see if its listed in the predefined programs. you can also adjust the sensitivity of the scroll wheel here..
Click to expand...
Click to collapse
Im still a little grey I guess, on my advanced config there is no option for >more settings> smart touch. is there a newer version that im not using???
i seam to have the same problem everything enabled but no scroll wheel any ideas thanks
i use this for scrolling, mine only work on the windows menus but i didnt enable it with Diamond tweak
also you cant uninstall this unless you hard reset, i figured i would let you know before you install it
i did not create this i am simply reposting it credit goes where credit is due
I had the scroll wheel working with the diamond tweak, have since had to hard reset and now I can not get it to work for any programs. It's drivin me nuts. Please help me out guys.
Just had it working in diamond tweak, I exited and tried it in file explorer, no luck so I went back to diamond tweak and its not working for that no either. wtf
I don't need all 18 icons in the programs tab and was wondering if there was a way to remove some of them. Im really trying to simplify the layout of the phone and would like to have only 2 or 3 if possible. Advice or help?
bump for some help
A C
Try Advance Configuration tool
You could edit your registry. First you have to go to the key [HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher]. There you can delete all numbers exept 0, 1 and 2. It will look like in the picture that I've attached. You could backup the registry key before deleting all the icons you don't want to have.
Try.....http://forum.xda-developers.com/showthread.php?t=405749
d12bn said:
Try Advance Configuration tool
Click to expand...
Click to collapse
With Advance Configuration Tool the program tab can't be edited/changed.
band27 said:
Try.....http://forum.xda-developers.com/showthread.php?t=405749
Click to expand...
Click to collapse
With TF3D Config you can edit the program tab but it's totaly unnecessary doing it this way cause this also can be done at the program tab when clicking the remove softkey there. And at the end I guess both programs won't help yesteryear because you will still have 18 icons on the program tab and he only wants 2 or 3 icons. Only way to accomplish what he wants is the registry tweak I suggested.
Thanks for the replies Registry edit it is. Hope I'll be ok doing this. I have flashed new roms already so this should be fairly easy....I hope
Easier than I thought. I used CeRegistry Editor. Really nice to work from my desktop. Again, thanks
yesteryear said:
Easier than I thought. I used CeRegistry Editor. Really nice to work from my desktop. Again, thanks
Click to expand...
Click to collapse
You're welcome. CeRegEditor is nice to work with.
Sure did work. Just a note for those who are thinking about doing this as well... I tried to use the 3, 4, 5 shortcut tabs only , meaning the middle row of shortcuts and it froze up Touchflo 3d. Couldn't load it properly I guess. For some reason the startup wants to see at least one icon in the first row. Does that make sense. By the way Im using
check out TF3D Config.. does it all..
Sage said:
check out TF3D Config.. does it all..
Click to expand...
Click to collapse
You only can hide the programs tab with TF3D Config. That's not what he wanted. He wanted less program icons on the programs tab.