Database Develop

Challenge for the xda-gurus-Solution for Intern.SmartDialing

I have uploaded a greek rom file for the htc wizard.
This ROM has a second level of protection that can not be bypassed only by CIDunlocking a phone.
After installing the ROM, uppon second boot (first boot installs ext rom then restarts) it displays a message
"This rom is intended only for devices sold by ace hellas" and freezes.
I think it searches for a valid IMEI range but I am not sure.
I am trying to find the exe file responsible for locking up the phone (using WM5 editing tools my maimach) but I have no luck yet. If someone could lend a hand I would be gratefull. Even giving me a hint (like how to edit the registry from a dumped ROM etc.)
Anyway, the file is located here.
http://dcom.teipir.gr/RUU_Prodigy_10107105_Qtek_WWE_ship_GR1.04.exe
Thanks in advance
Below, you can find instructions to customize smartdialing for recognizing characters for any language

My best man has the EXACT same problem with his Universal.
We haven't uploaded the firmware yet but can easily be downloaded through qtek.gr.
Can someone help?
It's a pitty not to be able to use the device just because he bought it outside Greece.
It's an interesting challenge after all.
Andrew, maybe you can send me a PM with what you have tried yet.

Re: I have a challenge for the xda-gurus
andrew_sh said:
After installing the ROM, uppon second boot (first boot installs ext rom then restarts) it displays a message
"This rom is intended only for devices sold by ace hellas" and freezes.
Click to expand...
Click to collapse
Check your Extended_ROM files. They might be what you are looking for. Probable workaround might be soft-resetting your device before extended_rom files are being installed, i.e. hard-reset your device now and immediately soft-reset it when you will see message "Customizing will start in 3 sec..." or something like that...
I think it searches for a valid IMEI range but I am not sure.
Click to expand...
Click to collapse
The IMEI is stored in registry within "RIL" branch, but your IMEI is not touched within traditional flashing/reflashing

A Russian fellow had done this job last year, for the S100 Greek Rom (Anansky i think was his name). The lock is not on the extended rom, but on the main OS. And if i remember well, it has an IMEI checking ytility, and another one which checks Language settings for the Language selection utility to work, but this can be changed with registry hack. Well, we are all waiting...

Re: I have a challenge for the xda-gurus
IMate->WM2k5 said:
andrew_sh said:
After installing the ROM, uppon second boot (first boot installs ext rom then restarts) it displays a message
"This rom is intended only for devices sold by ace hellas" and freezes.
Click to expand...
Click to collapse
Check your Extended_ROM files. They might be what you are looking for. Probable workaround might be soft-resetting your device before extended_rom files are being installed, i.e. hard-reset your device now and immediately soft-reset it when you will see message "Customizing will start in 3 sec..." or something like that...
I think it searches for a valid IMEI range but I am not sure.
Click to expand...
Click to collapse
The IMEI is stored in registry within "RIL" branch, but your IMEI is not touched within traditional flashing/reflashing
Click to expand...
Click to collapse
no it's not in extended ROM at least for the Universal (and sorry for posting in Wizard forum) - we tried your method from the first moment

1. No, extended rom has nothing to do with it , for sure.
2. Yes, anansky has done it before for the htc magician (my previous phone) but never revealed a howto.
@NLS
I have found a suspicious file called langbootcheck.exe which I tried deleting (with WM5 edit tools) prior to flashing my device. But then the device won't boot at all. Maybe this file is needed, or maybe I did something wrong?
If someone could at least tell me, how to edit the registry hives with the wm5 editing tools. This way I could see wich applications are executed on startup.

Re: I have a challenge for the xda-gurus
NLS said:
no it's not in extended ROM at least for the Universal (and sorry for posting in Wizard forum) - we tried your method from the first moment
Click to expand...
Click to collapse
Did you try to play with HKLM\Comm\BootCount value? To put it as 0 so it is always thinking of a just hard-resetted device?

no I didn't try that, nor the device is mine (to try)
andrew try having a 0 byte file in place of the exe - maybe it needs the file to be there but nothing to happen when it is called
maybe Ace (since I am 99.5% sure that they read xda-developers), could give us a hint on why they have done this (when nobody else did on the whole planet)...

Re: I have a challenge for the xda-gurus
IMate->WM2k5 said:
Did you try to play with HKLM\Comm\BootCount value? To put it as 0 so it is always thinking of a just hard-resetted device?
Click to expand...
Click to collapse
No, but it sounds like a good idea. That would explain why it doesn't lock up during the first boot process. But then again there is no way to change it because the os automatically reboots itself. Unless it installs a cab file from ext rom that does the trick. Do you think this might work?

NLS said:
maybe Ace (since I am 99.5% sure that they read xda-developers), could give us a hint on why they have done this (when nobody else did on the whole planet)...
Click to expand...
Click to collapse
i realy doubt it! I mean giving us a hint
I will try to replace the file with a zero-sized one. But then again I'm not even sure if it is the file responsible. I mean, that I just guessed (because the name sounded suspicious). It could be any other file. The file name could be desguized. Thats why I need to know 2 things:
1) How to edit the registry with maimach's WM5 editing tools.
2) Where is the startup configuration located i the registry

I didn't say tell us "how", I said for the to tell us "why"...
anyway...

Yeah ACE sux, well it's been really disgusting to lock the roms so we anyone who want Greek language to buy only from em. ACE think theirselves smart enough and all the other like Russian, italian, norwegian, dutch and many more who have their Qtek rom unlocked are the "stupid"...
Anyway this is a different story..
I am available to help in any way but i'm not such an expert user as you to play with the editing tools.
P.S:I see the rom is uploaded on a TEI of Piraieus server, you have any connection with teipir? I'm in the Automation.

bill_viper said:
P.S:I see the rom is uploaded on a TEI of Piraieus server, you have any connection with teipir? I'm in the Automation.
Click to expand...
Click to collapse
I'm in automation dept too! PM me!

NOone? :!: Buzz? Come on, you will make many people happy!!!!
I don't want to sound nagging but it must be very easy for you!!

I found another approach to our problem.
Instead of trying to hack the rom, I extracted some dll files needed for the greek smartdialing.
I dumped the Greek rom and followed the instructions here.
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=10204&catid=45
but used the Greek smartdialing.dll instead of the one posted above.
It worked very well. I even edited the smartdialing cab found on the ext rom and included the dll. So each time I hard reset the device, the smartdialing feature works for greek characters. I think the smartdialing can be customized just as easily for any other language, just as long as you find the .dll in your language. (For this, download a rom containing the language, and user WM5 editing tools found on xda-devs).
If someone needs it, I can upload the greek smartdialing cab to overwrite the one in your ext rom (for wizard only).
I also use AEKMAP for the internal qwerty and I find it very stable, simple and small.
So I guess there is no much point in hacking the greek rom (unless someone wants the menus customized - I don't).

how did you dumped the greek rom ?

andrew_sh said:
I found another approach to our problem.
Instead of trying to hack the rom, I extracted some dll files needed for the greek smartdialing.
I dumped the Greek rom and followed the instructions here.
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=10204&catid=45
but used the Greek smartdialing.dll instead of the one posted above.
I also use AEKMAP for the internal qwerty and I find it very stable, simple and small.
So I guess there is no much point in hacking the greek rom (unless someone wants the menus customized - I don't).
Click to expand...
Click to collapse
Awesome idea.... is there any way i can get my hands on that .cab file? And maybe on your .aek greek layout? because mine kinda sucks
Anywho, i see we are off to a good start here fellas, don't worry answers will come soon enough.

xperia x2 english rom

i just got an xperia x2 prototype but it is in dutch.
does anyone know where i can find the wwe version of the rom so i can flash it to english?
thanks

I don't know but is any chance dump your rom or panel instalation files from /windows directory

i have no idea how to do that.

Use this tool to dump it, http://www.4shared.com/file/126523116/2b69156a/Dump_My_Phone.html, it seems that some SE customizations are made by cab, can you post them also?
Then if you can post the raw files.
Cheers.

ok ill try to do it tomorrow because ive been very busy lately.
its too bad no one has an english rom.

bigneeker, it would be cool if u could dump the panels, panel mananger etc and put it up on rapidshare or something, thanks in advance

hell yes, tiltview on the x1 would be brilliant!
+thanks in advance

ok.
how do i get the panel program and tiltview out of the phone?
do i just look for the cab and copy and paste?
i dont even know what they are called.
sorry but ive never done anything like this before.

I think the dump tool just takes everything from the phone and shifts it towards your computer?
sorry i've never used it either :S

bigneeker said:
ok.
how do i get the panel program and tiltview out of the phone?
do i just look for the cab and copy and paste?
i dont even know what they are called.
sorry but ive never done anything like this before.
Click to expand...
Click to collapse
The cabs are located in the windows directory on your phone. If you are connected via active sync, just browse to your phone's windows directory, sort everything by file type, and copy all the cabs to your computer.
i just got an xperia x2 prototype but it is in dutch.
does anyone know where i can find the wwe version of the rom so i can flash it to english?
Click to expand...
Click to collapse
This isn't possible yet, since we don't have a wwe ROM, however, you can still get some english functionality out of your device. If you haven't already done so, goto Start>>Setings>>System>>Regional Settings and select "English United States" from the drop down list.
This won't fix the majority of the UI, but it'll put the calender stuff mostly in English, and many apps will also now be in English (e.g. Google Maps, Skype, etc.)

bigneeker said:
ok.
how do i get the panel program and tiltview out of the phone?
do i just look for the cab and copy and paste?
i dont even know what they are called.
sorry but ive never done anything like this before.
Click to expand...
Click to collapse
A easy thing is to copy the whole windows directory, put it on your computer then make a rarfile of it and upload
Then we can take out the files and upload them recustomized

Bump.........

Ya, keep this thread alive

i dont know what im doing wrong. i keep on getting "device is not ready" error

bigneeker said:
i dont know what im doing wrong. i keep on getting "device is not ready" error
Click to expand...
Click to collapse
With active sync or while dumping?
Try it with multiple computers,maybe the computer doesn't recognize the phone :/

during the dumping.
i got the addresses and put them in the dump my phone.bat by editing the file.
this is the result:
3.13M (0x320000) Part00
| 74.88M (0x4ae0000) Part01
| 128.00M (0x8000000) Part02
| 238.63M (0xeea0000) Part03
so when i add the numbers that are in the parenthesis and then click on dump my phone.bat i get the "device not ready" error.
do i have to do anything on the phone before? i already installed the enablerapi but do i have to activate it seperately or do i maybe have to cancel activesync? is that blocking it.

come on guys help him, it`s so nice that he do this for all of us!!
hope u get fix it dude!!
greetz neow

bigneeker said:
during the dumping.
i got the addresses and put them in the dump my phone.bat by editing the file.
this is the result:
3.13M (0x320000) Part00
| 74.88M (0x4ae0000) Part01
| 128.00M (0x8000000) Part02
| 238.63M (0xeea0000) Part03
so when i add the numbers that are in the parenthesis and then click on dump my phone.bat i get the "device not ready" error.
do i have to do anything on the phone before? i already installed the enablerapi but do i have to activate it seperately or do i maybe have to cancel activesync? is that blocking it.
Click to expand...
Click to collapse
You possibly don't have the proper permissions set. Try installing the sdkcerts.cab, if you haven't already. Did the regional settings tip help at all? Also any luck with copying the windows directory?

i installed skcerts and its still not working.
copying the files from windows isnt working either.

bigneeker said:
i just got an xperia x2 prototype but it is in dutch.
does anyone know where i can find the wwe version of the rom so i can flash it to english?
thanks
Click to expand...
Click to collapse
This could be the greatest thing to happen to the X1 since... BAHHH, THINK OF THE KITCHENS AND ROMS that we could get out of this

Linux on Blue Angel

Hi folks
I Just found a dusted "Blue Angel" Device in the cupboard, that I always wanted to use with Linux but had already given up some time ago.
Now, before selling it off at ebay, I wanted to give it another try and was delighted to see the "idiots guide" on this wiki page:
[xda-developers wiki ]BlueAngel_Linux
What happened so far:
I go to buy a SD-Card of 2GB (couldn't get a smaller one at my local store), put the image on it and give it a try.
It boots and brings up a familiar login prompt.
I login with root/rootme and get: "can't access tty; job control turned off" and a shell prompt.
The keyboard only works partially (only letters, no punctuation) so i can't even type "cd.." to navigate
Googling and looking at some (wiki-)pages here, at handhelds.org and linuxtogo.org didn't help me any further yet.
My Questions:
Did I do something wrong up to here?
What to do to make the keyboard working (did I mention it's a german Device?)
Can I launch some kind of GUI at this point (heck I don't even know if the Image contained GPE or OPIE ;-) ) or is the "can't access tty.." a problem i have to fix first?
Is there a more up to date image (to fix the keyboard-issue) I can use with the idiots guide or some evenly up to date documentation out there? I'm a regular Linux-User on the desktop and not afraid of the command-line?
Device Info:
Model No: PH20B
ROM Version: 1.22.01 GER
ExtROM-Version: 1.22.182 GER
Radio Version 1.06.00
I hope someone can help me on this before I go the ebay path
Greetings from .de
Markus

ubuntudude said:
Hi folks
I Just found a dusted "Blue Angel" Device in the cupboard, that I always wanted to use with Linux but had already given up some time ago.
Now, before selling it off at ebay, I wanted to give it another try and was delighted to see the "idiots guide" on this wiki page:
[xda-developers wiki ]BlueAngel_Linux
What happened so far:
I go to buy a SD-Card of 2GB (couldn't get a smaller one at my local store), put the image on it and give it a try.
It boots and brings up a familiar login prompt.
I login with root/rootme and get: "can't access tty; job control turned off" and a shell prompt.
The keyboard only works partially (only letters, no punctuation) so i can't even type "cd.." to navigate
Googling and looking at some (wiki-)pages here, at handhelds.org and linuxtogo.org didn't help me any further yet.
My Questions:
Did I do something wrong up to here?
What to do to make the keyboard working (did I mention it's a german Device?)
Can I launch some kind of GUI at this point (heck I don't even know if the Image contained GPE or OPIE ;-) ) or is the "can't access tty.." a problem i have to fix first?
Is there a more up to date image (to fix the keyboard-issue) I can use with the idiots guide or some evenly up to date documentation out there? I'm a regular Linux-User on the desktop and not afraid of the command-line?
Device Info:
Model No: PH20B
ROM Version: 1.22.01 GER
ExtROM-Version: 1.22.182 GER
Radio Version 1.06.00
I hope someone can help me on this before I go the ebay path
Greetings from .de
Markus
Click to expand...
Click to collapse
I have QTopiaII working on my BA, the instructions are a bit scattered and kinda confusing (and very, very outdated), but you should be able to run it without having to input any code into the HaRet prompt. It should do everything by itself. If I can, I will upload the contents of my SD later today so that you can try to d/l directly onto your card.
It could also be that you are running an older version of HaRet...

egzthunder1 said:
I have QTopiaII working on my BA, the instructions are a bit scattered and kinda confusing (and very, very outdated),
Click to expand...
Click to collapse
Yes indeed
but you should be able to run it without having to input any code into the HaRet prompt. It should do everything by itself. If I can, I will upload the contents of my SD later today so that you can try to d/l directly onto your card.
Click to expand...
Click to collapse
That would be great for a test-run! Thanx in advance I think a gzipped (iso?) image file would do it, I'll transfer that to the SD using dd.
It could also be that you are running an older version of HaRet...
Click to expand...
Click to collapse
I must admit that I don't really unterstand the HaRET magic yet. Didn't find any documentation until now.
Can you point me to some usable Documentation for my project? At the moment I'm interested in:
- HaRET (how to configure and use it, up-to-date downloads)
- How to build a SD-Image by yourself (I stepped on something similar at handhelds.org but that seemed really outdated.)
- Any info readable by a non-developing but willing to learn human
Thanks again, Markus

qtopia
i have tried qtopia in my BA if u run the HaRET it will generate a img file in u r sd card it is about 200 mb why dont u try to copy img file to the sd card

ubuntudude said:
Yes indeed
That would be great for a test-run! Thanx in advance I think a gzipped (iso?) image file would do it, I'll transfer that to the SD using dd.
I must admit that I don't really unterstand the HaRET magic yet. Didn't find any documentation until now.
Can you point me to some usable Documentation for my project? At the moment I'm interested in:
- HaRET (how to configure and use it, up-to-date downloads)
- How to build a SD-Image by yourself (I stepped on something similar at handhelds.org but that seemed really outdated.)
- Any info readable by a non-developing but willing to learn human
Thanks again, Markus
Click to expand...
Click to collapse
I don't know much about HaReT myself, but I do know that you have to have the right parameters on the default.txt (or config file) otherwise, the thing will either crash or not boot (and this is where it can get tricky).
As far as the SD image, I was trying to get something to make an image of an SD not too long ago and I found a program called Winhex, which can make images of sd cards. However, you need to get the full version to be able to mount the image on a card. You mentioned something else in your post. Are you using a different program for SD images? I would love to know about this program if you have one.
I haven't forgotten about the things on the SD card, I will post them (SD image is not necessary though) but I just haven't had the time.

-go to: http://www.linuxtogo.org/~htcpxa/htcblueangel/Qtopia/
-download Qtopia-Linux-htcblueangel.exe and QtopiaPhone-image.rootfs.tar.bz2
-copy them to sd card, make sure you have at least 200-300 mb free
-start Qtopia-Linux-htcblueangel.exe,for the first time it will generate a 200 mb root file, so it could take a while
-next time you boot in qtopia it is much faster.
ps: you dont have to edit text files in this case.
ps2: also on irc-freenode there are developers who managed to install even ubuntu on there phones

[Q] some .exe that could be removed from most himalaya rom's ?

i have found some .exe in most himalaya rom's "\Windows" folder that seem too be not needed so they could be deleted from future kitchens and stuff.
anyway here they are with screenshots..
1.sms_alert_fix.exe-pretty obvious.
2.SimLock.exe-i think something to do with unlocking sims (eventhough i've never used it).
3.cgacutil.exe-it shows you what version of NetFrameWork you are running (not sure if it gets installed as defult when NetFrameWork is installed.
4.hwhelp.exe-seems to be left from the keyboard option of character recognizer.
5.wrlsmgr.exe-maybe a part of the himalaya wireless driver.
can these be removed or deleted safely?
any ideas?

advanced15 said:
i have found some .exe in most himalaya rom's "\Windows" folder that seem too be not needed so they could be deleted from future kitchens and stuff.
anyway here they are with screenshots..
1.sms_alert_fix.exe-pretty obvious.
2.SimLock.exe-i think something to do with unlocking sims (eventhough i've never used it).
3.cgacutil.exe-it shows you what version of NetFrameWork you are running (not sure if it gets installed as defult when NetFrameWork is installed.
4.hwhelp.exe-seems to be left from the keyboard option of character recognizer.
5.wrlsmgr.exe-maybe a part of the himalaya wireless driver.
can these be removed or deleted safely?
any ideas?
Click to expand...
Click to collapse
SMS_Alert_Fix will revive your phone when you will get a sms.
Simlock is really weird.
cgacutil is funking needed.
hwhelp is not needed but I don't want to know what will happen when deleted
wrlsmgr is needed for people who have SDIO Wifi card which himalaya support.

thats it then SimLock.exe is getting deleted and i will see what happens!

Here is what I removed to get free sectors in My WM6.1. The only way to learn effectively is: trial and error. Next try to read and understand the registry. It's all in there.
http://www.mediafire.com/file/xonmumuhkmy/Removed.rar

muckelmaus said:
Here is what I removed to get free sectors in My WM6.1. The only way to learn effectively is: trial and error. Next try to read and understand the registry. It's all in there.
http://www.mediafire.com/file/xonmumuhkmy/Removed.rar
Click to expand...
Click to collapse
msim is keyboard right?
wisplite is totally unneeded, you can delete it but don't forget to delete registry entries in shell

also i know these can be deleted bcuz they are to do with error reporting and feedback-
DwXfer.dll
dw.exe
ceipui.exe
and also this-
BackPack.dll
hey muckelmaus these are needed for keyboard-
msim.dll
msim.96.dll
this for the 4 dots you have to tap when you first start up a new rom-
welcome.exe
and this is one of your splash screens-
welcomehead.96.png
and this is used for the search device for file function-
shfind.exe
otherwise i cannot see any problem with deleteing the rest of them...

i have also found this on a other part of xdadev-
*
Hd.dll
*
Aosaxst0.dll
*
Mencfilt.dll
Here Hd.dll and Aosaxst0.dll are used for M$ debug. Like some times on pc the apps close itself, and windows asks you to send the details to M$ (example. error number : 893647). We ( users) don’t know what it means, only the developer in M$ know. But I never saw these files report anything to us. SO!!! We don’t need them! they are trash!!
Now Mencfilt.dll is for storage card encrypt. If you don’t use it, you can delete it as well. Have you had this experience where after flashing a new Rom every thing in storage card can’t show any more!!!! but its still use the space in the card. Yes it's because of this file only.
**NOTE: There are some device in which removing these files causes system issues so be careful. But only a few devices

advanced15 said:
also i know these can be deleted bcuz they are to do with error reporting and feedback-
DwXfer.dll
dw.exe
ceipui.exe
and also this-
BackPack.dll
hey muckelmaus these are needed for keyboard-
msim.dll
msim.96.dll
this for the 4 dots you have to tap when you first start up a new rom-
welcome.exe
and this is one of your splash screens-
welcomehead.96.png
and this is used for the search device for file function-
shfind.exe
otherwise i cannot see any problem with deleteing the rest of them...
Click to expand...
Click to collapse
As I used a german 'qwertz' keyboard and a smaller splash screen, these files are just overwritten in my rom. These are backups.
I skip the Touchscreen alignment at first bootup (it doesn't work anymore after changing initflashfiles.dat)
Did you ever try to use * as a joker with the search program? Totally useless, so it is overwritten by a better app, renamed to: shfind.exe.

muckelmaus said:
As I used a german 'qwertz' keyboard and a smaller splash screen, these files are just overwritten in my rom. These are backups.
I skip the Touchscreen alignment at first bootup (it doesn't work anymore after changing initflashfiles.dat)
Did you ever try to use * as a joker with the search program? Totally useless, so it is overwritten by a better app, renamed to: shfind.exe.
Click to expand...
Click to collapse
You did something wrong if touchscreen alignment does not work after rewriting initflashfiles.

aeroflyluby said:
You did something wrong if touchscreen alignment does not work after rewriting initflashfiles.
Click to expand...
Click to collapse
It didn't bother, everything worked 'till I deleted some files in startmenue and rearanged the programs. But noone told me that he missed the feature. Approximately 300 users over all. Even if some of them only tested. For me it was OK, and I'm still running it from the very first day, without any need of a new hard reset 'till now.

muckelmaus, why do you have a smaller startup screen?

I reduced the size of the files to get some kB/sectors free, as my rom is full of third party apps.

muckelmaus said:
I reduced the size of the files to get some kB/sectors free, as my rom is full of third party apps.
Click to expand...
Click to collapse
As I remember you can put JPG file as welcomehead
there is 2 solutions:
Save as jpg file and then just rename into .png
Save as jpg and change registry entry in redist dpi 96
by the way:
look at this:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Splash Screen]
"MSBitmap"="\\windows\\welcomehead.96.png"
"MSTimeout"=dword:7530 ; 30000 milliseconds
"CarrierBitmap"="\\windows\\welcomehead.96.png"
"CarrierTimeout"=dword:7530 ; 30000 milliseconds
Click to expand...
Click to collapse
maybe we could have 2 splash screens and change their duration on screen
So, when combined with bootloader 2 splashes (as I post tutorial to change it easly) we can have 4 splashes.
Good for doing PC boot images as I did before hima died my work in attachment
(I know that hima does not have AMD Althon but it seems good)

simlock.exe
simlock.exe is all ok too delete...
no problems deleting in AK6.

advanced15 said:
simlock.exe is all ok too delete...
no problems deleting in AK6.
Click to expand...
Click to collapse
hwhelp.exe - is ok to delete as well
done in AK6 ,no problems !

[Q] Mini squadron plane unlock

Does anyone know how to unlock all the planes apart from playing all the game?

A hack to accomplish what in Mini Squadron?

Think he might be asking for what was posted for angry birds to get all 3 stars.
Might be asking for a hack to get all planes unlocked etc

Thread Cleaned due to confusion, more on topic now .

just edit save.sav file on your sd card

blueeyeblue said:
just edit save.sav file on your sd card
Click to expand...
Click to collapse
Care to explain a little more? I know how to access save.sav file. Where and What do I edit ?

That's my problem, too. I only see some strange symbols. I opened the save file with a text editor and a hex editor but with the same result.
So what do I have to edit in the save file

tealk17 said:
That's my problem, too. I only see some strange symbols. I opened the save file with a text editor and a hex editor but with the same result.
So what do I have to edit in the save file
Click to expand...
Click to collapse
I guess no one knows how to do it?
If not, please let us know, what needs to be edited.

I'm still trying to figure out how to unlock all the planes in the save.sav. Please someone post their mostly unlocked .sav if nothing else.

One more player looking for the correct changes in the 'save.sav' file.

i have unlocked all planes so far and deleted.luckily i have titanium backup.leme see if it works ...
Edit- yes 56/56 planes unlocked.getting saved file

Where do I put this file?
Edit: This doesn't seem to work. I overwrite the save with this and nothing happens.
Second edit: I was putting the file in the wrong place. It works just fine now! Awesome

this funny
I had unlock all planes on Ms the sad part is about three weeks ago my phone fell off my car and got trashed lost everything I guess I will have to start playing again then upload the save.sav file see y'all in like two months lol..

I downloaded this save file and I'm trying to figure put where to put the file, or if I need to extract it..
If anyone can advise on what I need to do so I have all planes unlocked..
sj
Sent from my E4GT on CM10 9/10 Nightly using [email protected] Pro 2.2.8

Try sdcard/Android/files/greyfinstudios.android.minisquadron/

sharp1114 said:
Try sdcard/Android/files/greyfinstudios.android.minisquadron/
Click to expand...
Click to collapse
Thanks sharp, that helped me,! My folder was in a slightly different location, I found my folder here: sdcard/Android/data/greyfinstudios.android.minisquadron/files
Thanks again!
sj
Sent from my PimpedOut© E4GT on CM10 - 12/09 Nightly using [email protected] Pro 2.4.5

sharp1114 said:
Try sdcard/Android/files/greyfinstudios.android.minisquadron/
Click to expand...
Click to collapse
No folder !!