Hi there.
I have a folder 2577 containing 2 files autorun.exe and autorun.nnp
also i have igo dir where maps and other data is located.
When trying to run autorun.exe it says a newer version of program is installed on the card. What are directories where such files could be?
Maybe there is some short tutorial on how to install igo navigator?
phone tytn II
Thanks for suggestions
I think IGo will install on the device per default (\Program Files\iGO8\). The data is still located on your sd-card. Or look in the registry HKLM\Software\iGO8\. If there is an entry, try to delete it.
yes, thanks.
but know is another problem: it cannot locate languages files...
maybe someone could provide a tree how files should be stored
know i have program files/igo8/content/lang/ and here are my files but when starting i get initialiazation eror no language files were found
heh finally after formating micro card it works.
however in igo it says that gps receiver is connected but no signal is shown.
Has anybody idea why it could be so?
Another issue i don't know why, but every time i get in external gps->gps hardware port and change it as i need it gets lost.
as if i would set that data... maybe someone had such problem?
Related
Hi;
Could someone help me please. I have installed TT6 on my XDAIIi, but when I start it TT6 states that no map is found. It also can't find my vice files.
I have installed both voice and my map on the Storage Card.
Have I missed something? What am I doing wrong?
Pls help.
Cheers;
pc99
/2577 directory
Hi!
This is probably caused by the absence of a /2577 directory (and the two files AutoRun.exe and autorun.exe-run) on your storage card.
This directory is mandatory.
Kind regards,
Piet.
I have the same problem ..can anyone help??
thanks
asz
have you guys solved your problem yet???
create a empty AutoRun.exe file under root directory of SD card, and then copy the map into it as well.
Right finally I have managed to solve the problem, email me on Hotmail, I can only help you guys with TomTom6+UK & Australia Map+speed Camera.
Sidd
Hi,
Every time my Kaiser boots, directly Tomtom boots. That's very anoying, it's not in startup folder, tomtom is installed on sd.
any ideas?
Thanx
You'll find a directory on the root of your SD card '2577'
Copy this to your PC (you will need to replace it if ever you need to re-install) and then delete it.
It's for when you first put in the card but for some reason does not de-activate.
@Farsquidge
Thanx it worked, so happy now!
When I delete 2577 folder and start up tomtom again it cant find my maps...its very strange like that...any ideas?
That's very strange.
Have you actually installed the SW or are you just running the App from the SD card?
I think a better option for not having tomtom automatically start at boot up is to simply remove the autorun.exe file from the 2577 folder and leave everything else there. Did it right after buying my Tilt and haven't had the auto start problem since.
I have it installed to the phone...I dont know why the 2577 folder is so important.....??.....
dwcliff703 said:
I think a better option for not having tomtom automatically start at boot up is to simply remove the autorun.exe file from the 2577 folder and leave everything else there. Did it right after buying my Tilt and haven't had the auto start problem since.
Click to expand...
Click to collapse
When I remove that file, or any file for that matter in the 2577 folder it either still auto starts or says cannot find maps, what is the deal. Also when i boot the phone it also tries to install tomtom all over while the program starts too, I have to wait like 5 minutes for phone to becoem responsive to touch or buttons.
dtjunkie07 said:
I have it installed to the phone...I dont know why the 2577 folder is so important.....??.....
Click to expand...
Click to collapse
The 2577 directory is an autorun directory which means any program called autorun.exe inside will run as soon as the SD card is put into the device. Usually is used by GPS software for installation of its files.
just rename the 2577 file (e.g. call it 2577-ttn) and this should fix the auto-run problem. If you then want to change it back to autorun, just rename it 2577 again.
rienzi said:
just rename the 2577 file (e.g. call it 2577-ttn) and this should fix the auto-run problem. If you then want to change it back to autorun, just rename it 2577 again.
Click to expand...
Click to collapse
it says maps not found when you do that. anything I change or remove in the 2577 folder makes tom tom say no maps found, why does it need auto run for the maps??????????
moddin said:
it says maps not found when you do that. anything I change or remove in the 2577 folder makes tom tom say no maps found, why does it need auto run for the maps??????????
Click to expand...
Click to collapse
Make sure the "ttnavigator.bif" file is under "\Storage Card\". Copy it from "\(Storage Card\)Program Files\navigator" directory if it's not there. Otherwise I have no idea.
hello
i need to add a username into the registies for a number of devices i'm flashing. Unfortunatly the usernames all need to be different i.e. PDA001, PDA002 and so on...
I've created a number of different cab files each for a different device that will add the username in.
So is it possible to run the cab file off the storage card as part of the hard reset process. i've updated the SD card with the file Username.cab which is the name of all the cab file, then added "CAB: \Storage Card\Extended_ROM\Username.cab" in to config.txt which is in the Extended ROM. i tested it but it didn't work.
Has anyone got any ideas
Or may be have a shortcut to the cab file added into start up. Would that work?
I'd suggest that you instead edit an existing (or relatively insignificant) CAB file (that you'd probably have no use for anyway) with the registry entries/additions so that its guaranteed to be included when you do the Extended ROM customization.
Did you ensure that you copied all the files from an original extended ROM correctly (before making your modifications)?
The thing is I have around 250+ device which need flashing with the same image and as all the devices will require a different Username adding into the registies I 'll need to run an external cab file, a cab file which will be different for all the devices and it's best to run it from the SD card.
I tried to adding a cab file into the Extended ROM which will install a shortcut into the startup folder the shortcut is to the cab file on the storage card. But for some reason it didn't run.
I have a couple of SD cards with an image of my Extended rom on so if anything goes wrong i have the backups.
Whats wrong with having the 'end-user' maually execute the .CAB file?
Why don't you simply customise one PDA (the way you wan't with your preconfigured settings) (minus the user/device name), then do an entire backup using SPB BACKUP (onto a SD Card). You can then restore this image on all 250+ devices (sounds time-consuming,but it really isn't).
All the end user had to do, is to manually execute your .CAB file when they are issued the units.
This is your true answer (in my opinion):
http://www.spbsoftwarehouse.com/products/backup/?en
RE: Whats wrong with having the 'end-user' maually execute the .CAB file?
Basically the devices are used by Market research interviewers who work for us, most of whom are not familier with the devices and are not computer litterate. I'm responsible for a small support team and also the development of the devices. The software we use is already extremley simple and all they need to do is click a buttom "Connect" if the username is not already inserted they get a box "Logon Failed, please check the following details are correct." and a username and password box is displayed and they simply need to type in the id number from the sticker on the back of the pda (like PDA001).
We have just had a large project in feild and over the period we have around 200+ user. Around 50% of the call we took, at some point they had problems entering the username. As much as SPB backup would be of use, if they can't already do a simply thing like type in PDA123, asking them to do this seem like asking alot and would probabily cause more issues.
We already have all the other information in the registries for this application and the username is the only thing which isn't consistant through out.
Do you know if it would be possible to prompt them to run the cab from the sd card which enters the username into the registires on startup?
Nunwood PDA said:
Do you know if it would be possible to prompt them to run the cab from the sd card which enters the username into the registires on startup?
Click to expand...
Click to collapse
Sure it is possible. Did you already try placing a shortcut to the .CAB in "Windows\StartUp" ?. Likewise, you can easily create another script that deletes that shortcut (to ensure that its only used once).
Please keep us posted, on your developments.
Nokia 3650 said:
Sure it is possible. Did you already try placing a shortcut to the .CAB in "Windows\StartUp" ?.
Click to expand...
Click to collapse
Yeah, it didn't do anything. I had a cab file in the extended ROM which placed the shortcut in the dir. \Windows\startup\. For some reason nothing happened, but when I navigate to the .cab file it ran without any problems.
When you say create another scipt, how would I go about doing that? If i had an .exe it could act as a link to the cab on the SD card. i'm not familier with this kind of method. But I think that would solve the problem.
The location of the .cab is: \Storage Card\Help\UserName.cab
Thanks for the exact location. I'm just compiling something for you in visio Studio 2005, that will execute the .CAB file when run at automatically from startup (it'll do this only once).
TomTom auto starts everytime I unplug my diamond from an usb connection. It only takes a few button presses to exit out of TT but it gets annoying after a while.
Any ideas
Which version are you using, It use to happen I think with version number 5.21 because that version have got the "Autorun" file in the installation folder and whenever you dissconnect your device, the device recognise the extra memory as it is just plugged-in.
Sid
I am running TT6 (which came with the phone) and ROM 1.93.831.1 but it was doing it with the previous ROM version as well.
delete the 2577 folder on your internal storage/where ever else it maybe and this should stop it.
man you really should use the forum search.
Its "autorunning" everytime you unplug usb as it sees the memory card again and autoruns. Follow the advice in the previous post and please use the search next time.
Addicteddddd - Thanks, I will try that
Monty - I searched under Tom Tom and auto Start and could not find what I was looking for.
As I said, follow the post above (Addicteds). In directory 2577 on the Internal Store you should find directory \2577\autorun. Delete this file.
Doesn't work for TT7
TomTom loads evrytime I soft reset. I'm using TT7 so is it possible to disable autorun for TomTom 7 as there is no 2577 folder?
Richard
Monty Burns said:
As I said, follow the post above (Addicteds). In directory 2577 on the Internal Store you should find directory \2577\autorun. Delete this file.
Click to expand...
Click to collapse
pixelart said:
TomTom loads evrytime I soft reset. I'm using TT7 so is it possible to disable autorun for TomTom 7 as there is no 2577 folder?
Richard
Click to expand...
Click to collapse
Check if there's anything in \Windows\StartUp ?
autorun
i know this is a old post but i have the same on my thd with autorun when i remove my sd card
best way I found to deal with this is just go to the sd card into folder 2577 and just rename the files in that folder or rename the folder.
that way if you do need it at any time you can just rename it.
and you have your autorun back.
Hi
i was wondering if any one knows how to change the default location of the file storage from the device memory to the storage card for the app footprints,
also if the new version tomtom7 9.15 will pick this up if you change the location of footprints picture file storage.
thanks
did you work this out - anyone ?
?.?.?
Hell, I'd be satisfied with a version of Footprints that works on a Stock Kaiser ROM.
Hi.
I did the following to get Footprint to work with TomTom 7
1. On yout phone rename CoPilot to CoPilot_
2. Copy and paste (on notebook or PC) Tomtom navigator folder on your phone to same folder as CoPilot_ on your phone
3. Rename Tomtom navigator folder to CoPilot
4. On your phone, in the newly created directory CoPilot rename Navigator,exe to CoPilot.exe
restart and shpuld work just fine (did by me)
good luck!
punish9200 said:
i was wondering if any one knows how to change the default location of the file storage from the device memory to the storage card for the app footprints
Click to expand...
Click to collapse
Hi, just to answer your first question: Had the same idea to do so on my htc hd2.
Change the key HKEY_LOCAL_MACHINE\Software\HTC\FootCam\Ipc\SaveLocation from 0 to 1 in your mobile registry. Files will be stored on storage card after a reboot
in my german localized version the file location now is '\Speicherkarte\DCIM\100MEDIA'
anyway: you will find out the location where files are stored after taking a picture and looking into the key 'SecondCapturePath' afterwards (don't forget to refresh your registry browser by pressing [F5] or so)
Thanks
Thanks for this tips ;-)
It's just what i'm looking for (works on HD2)
solediver said:
Hi, just to answer your first question: Had the same idea to do so on my htc hd2.
Change the key HKEY_LOCAL_MACHINE\Software\HTC\FootCam\Ipc\SaveLocation from 0 to 1 in your mobile registry. Files will be stored on storage card after a reboot
in my german localized version the file location now is '\Speicherkarte\DCIM\100MEDIA'
anyway: you will find out the location where files are stored after taking a picture and looking into the key 'SecondCapturePath' afterwards (don't forget to refresh your registry browser by pressing [F5] or so)
Click to expand...
Click to collapse