Database Develop

Stuck in BOOTLOADER ! I tried everything

i just spend 2 days searching for a solution, i use the search option but without results..
I got a mda g3 device ipl spl both 3.08
i flashed it with a wcrx2 rom wm6 based, but during the flash it stucked somewhere and then it went to bootloader.
If i turn it on u get the bootloader screen..
I tried several roms even the original ones, but NO CONNECTION with USB !
i get the Connection error !
is there someone who know how to solve this?
id rather paypal u 25 euros for solving my problem then send it to customer service t-mobile !

come on guys
i really need some help here !

you can still flash from bootloader mode
you can't connect via activesync but you should be able to connect still
make sure you don't have any virus protection firewall preventing the connection
then try flashing the button rom or something

ewatylerdurden said:
come on guys
i really need some help here !
Click to expand...
Click to collapse
First verify if your phone is establishing connectivity with pc through usb cable.Get into bootloaders and connect your phone with the pc via usb cable,verify if small usb appears at the bottom of the bootloader screen,if it appears then run the Ruu,if doesn't appear,then you have a either usb cable fault or mini usb port of the phone is damaged,it maybe that usb slot of the pc is not working,try with other usb input of the pc .
Cheers !

first i thank u for the time u took to help me out..
i tried several times to flash my rom and yeah i see the USB text in the corner of the screen, so im 100% sure the USB is working..
but im gonna try to flash it with the BUTTON ROM
are there other roms wich i can use for flashing my mda?
i mean wich roms are good for flashing my mda that stucked in bootloader..
cause the other ROMS didnt want to connect with my mda !
i was halfbaked when i typed this text..so sorry for my grammar et..

Hard SPL via MicroSD card

Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance

I don't believe it is possible unfortunately.
What issues are you having? Have you tried updating (or even downgrading them depending on what you currently have) the usb drivers?

The probleme that most of us flashing new cooked ROMs & my device get stucked several times. Likely it is connected via USB, Otherwise I can not do any thing.
Also due to several ROM flash times the USB connection in HD (or other devices) might broken.
This why we need a way to install USPL or HSPL via SD card.
Can some one help?
Regards

What I don't understand is how can a usb port become 'broken' due to flashing several custom build roms?
I too having a problem with the usb port on my blackstone. It can only be charged but not synchronized with pc anymore. I had HTC pick up my phone to have the mainboard replaced. Luckily the phone was still under warranty, so it won't cost me much.
Can someone explain?

i had similar probs ...
went to regedit , local maschine, software, microsoft,
windows ce services and changed to (1) the key : hasusbdevice
after this no problems anymore
it seems that a program installation changes this number from 1 to 0.
i have win 7 32

kersey said:
Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance
Click to expand...
Click to collapse
This is not possible infortunately. However you do not need your device sync'ed with your pc to run HSPL. You only need to put device into bootloader and then connect it to pc. Bottom of bootloader should change from 'serial' to 'usb'. If not, you will need to update usb drivers. All this info can be found on this thread, no need for another
Thread closed

Problem X1 with Mobile Device Center

Hello guys/girls
I read about the "ROMS" just yesterday and I want to
try it to. But when I try to HARD_SPL my X1 it goes wrong.
When I hook up my X1 with the pc the windows mobile device center
just doesn't recognize the phone. I did turn activesync 'on' on the phone.
But WMDC just keeps saying 'not connected.
I work with Windows 7. Might that be a problem??
Please help me. I want to join the fun of a X1

AlfaJoker said:
Hello guys/girls
I read about the "ROMS" just yesterday and I want to
try it to. But when I try to HARD_SPL my X1 it goes wrong.
When I hook up my X1 with the pc the windows mobile device center
just doesn't recognize the phone. I did turn activesync 'on' on the phone.
But WMDC just keeps saying 'not connected.
I work with Windows 7. Might that be a problem??
Please help me. I want to join the fun of a X1
Click to expand...
Click to collapse
hi you should try to reinstall the driver's for the phone so the pc can pic it up ! because you have changed the spl ITS A DIFFERENT SIGNAL GOING OUT TO THE PC !!
IF THIS FAILS !! in this forum is the s/e offical rom APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010 LOAD THE kovsimg.nbh DIRECT TO YOUR MEMORY CARD

turnerhall said:
hi you should try to reinstall the driver's for the phone so the pc can pic it up ! because you have changed the spl ITS A DIFFERENT SIGNAL GOING OUT TO THE PC !!
IF THIS FAILS !! in this forum is the s/e offical rom APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010 LOAD THE kovsimg.nbh DIRECT TO YOUR MEMORY CARD
Click to expand...
Click to collapse
DOWNLOAS THE ROM YOU WANT DIRECT TO YOUR MEMORY CARD VIA CARD READER OR GO INTO SYSTEMS CONNECTION -USBTOPC AND CHARGE SETTING TO DISK DRIVE !! after thats done remove battery you maye have to rename the download kovsimg.nbh !1 pot phone in flash mode ie holding power button and down volume button after yoou put back the battery

try turn off "enable faster data connection" on youre phone.
settings>connections>usb-to-pc

Try switching USB ports. Sometimes my USB hub doesn't work and I have to use the ports on my computer.

Your usb port might not be providing enough power. My desktop has a P45-UD3P motherboard and those ports don't recognise the X1, but my laptop (HP 6930p) does. I need to use one of those two-port usb cables to get my desktop to work with the phone.

Did you try selecting "End a partnership" via Windows Mobile Device Center and then try connecting your device again? I've always had connection problems when flashing my phone and this method works 100% of the time Aloha for now.

and don't use usb hub

[Q] Sync over USB problem

Hello,
I'm having issue synchronizing my Xperia X1 with my PC using ActiveSync or WMDC.
Powering my battery works but sync doesn't. I tried 2 other USB cables and same problem occur.
I tried different PC but still I have same problem. I event went back to original Stock and this doesn't helps also.
Should I send my device for fix? I have warranty? I can reverse to original Stock and put back original boot loader.
Hopefully they will fix it but if they don't I cannot add custom ROM any more

You can go and get a card reader to have your sd mini read in the pc, I got mine with 5 EUR and it also supports several type of cards. Also keep in mind that read/write speed is faster with a card reader than plugging your device in Disk Drive mode and this can be convenient sometimes
Good luck with the repair. If you revert to stock SPL and to stock rom and if your time of warranty is not up then you should have no problems, although in my country the service center sucks, they try to make you pay as much as possible...

I manage to resolve this issue. I revers back to my stock ROM 6.1 and still I cannot sync. Then I put back radio 1.10.25.18 and it START TO WORK !!!! I can sync now without any problem and it works now with 6.5 ROM and different radio.
This was last step before I want to return it to SonyEricsson service.

Usb problem
Hello,
I'm having issue synchronizing my Xperia X1 with my PC using ActiveSync or WMDC.
Powering my battery works but sync doesn't. I tried 2 other USB cables and same problem occur.
I tried different PC but still I have same problem. I event went back to original Stock and this doesn't helps also.

usb probem
how to update the radio 1.10.25.85 on xperia x1 by the micro sd card? since the usb is not working? thanks!

same as you update your ROM, just rename radio file to KOVSIMG.nbh and update it. Hope this will work for you also.

yes I do this procedure [KOVSimg.nbh] but gets caught in tla loading. WHAT do I do now .thanks!

there is no difference in flashing ROM and Radio, can you maybe check that you do all proceudre correctly? maybe you should download Radio from some other place, maybe is broken

i have the same problem...the battery is recharging but it cannot sync...maybe it has something to do with the version of windows...i was using windows vista and windows mobile device center and it synced and all was ok...but now i have windows 7 ultimate x64 and even though i downloaded the mobile device center it does not recognise the phone when i plug it in activesync mode....it still works perfectly in USB drive mode....but i cannot flash a new rom through the usb method now...recently tried it on a friends pc with windows xp and activesync and worked just fine...any thoughts on that??..

ok. I tried everything. [xperia x1] is not reconhesido by [usb].
neither the radio rom can be clicked. [already downloaded several saiter]. it hangs in louding

I've the same problem occured before but I'm not sure if it's as simple as mine.
All I did was disable "Faster Transfer" under Active Sync radio Button in USB 2 PC (Control Panel), hope it's helpful.

Ok, I'd try this, but I have two questions:
1) can any body give the link to the old Radio rom?
2) I already have a 828x rom installed. is that compatible with the old rom?

life owner said:
Ok, I'd try this, but I have two questions:
1) can any body give the link to the old Radio rom?
2) I already have a 828x rom installed. is that compatible with the old rom?
Click to expand...
Click to collapse
hm, OT post
1) radio selection, don't forget to install a matching rilphone.dll
2) afaik those two (meaning radio rom and normal rom) are not related like that, radios should work in all versions on all roms
it might be, that you suffer less functionality/signal strength when using an older radio version, but that is regionally different and cannot be generalized
hope you find your ideal combo
Best, DK

[Q] installing Hard SPL without A USB cable

hey guys, I'm a newbie and I have a problem that really irritates me, I have bought an old X1 running windows mobile 6.1 German, I wish to install an English or a French OS, the problem is that my USB cable just don't work, I've tried several others on many pcs, still having the same problem, isn't there a way to install HardSPL without using the USB cable? another question; is it really necessary to install HardSPL if I want to install an original SonyEricsson's ROM, please answer me, I just don't understand a word of german language, thank you, please.

u dont have to hardspl if using original rom. but u still need a working usb cable. how can u install without a cable? OTA?

i was thinking of the memory card method.

Why not using USB Cable, though the fake one is not expensive.
You can also salvage from your other gadget, mine Ext. HDD
Do u insist using Storage Card?
Okay, I'm not sure if it will work or might destroy your X1.
When you doubled click (Execute) the HardSPL you'll found "RUU_Signed.nbh" extracted. Maybe you can place that "RUU_Signed.nbh" to Storage card. And then execute bootloader, like flashing ROM.
*Notice* It's only my idea. I have no guarantee about this because I've never done this.
Maybe you can PM the expert (the creator of that HardSPL) first.

U just get an error when installing hardSPL?? I think your computer USB got a missunderstanding or uncompitibility with another USB driver, maybe u should to install a new fresh computer with USB 2 installed, then try this to hardSPL your X1, worked on me, hehehe

DO NOT try and install hard=spl via sd card
it WILL fail and you could breaak your phone blah blah!
just buy a cheapo usb cable
have you installed activesync or WMDC first??

well, i've solved my problem guys, thanks. I've just bought a fake usb cable.