i just spend 2 days searching for a solution, i use the search option but without results..
I got a mda g3 device ipl spl both 3.08
i flashed it with a wcrx2 rom wm6 based, but during the flash it stucked somewhere and then it went to bootloader.
If i turn it on u get the bootloader screen..
I tried several roms even the original ones, but NO CONNECTION with USB !
i get the Connection error !
is there someone who know how to solve this?
id rather paypal u 25 euros for solving my problem then send it to customer service t-mobile !
come on guys
i really need some help here !
you can still flash from bootloader mode
you can't connect via activesync but you should be able to connect still
make sure you don't have any virus protection firewall preventing the connection
then try flashing the button rom or something
ewatylerdurden said:
come on guys
i really need some help here !
Click to expand...
Click to collapse
First verify if your phone is establishing connectivity with pc through usb cable.Get into bootloaders and connect your phone with the pc via usb cable,verify if small usb appears at the bottom of the bootloader screen,if it appears then run the Ruu,if doesn't appear,then you have a either usb cable fault or mini usb port of the phone is damaged,it maybe that usb slot of the pc is not working,try with other usb input of the pc .
Cheers !
first i thank u for the time u took to help me out..
i tried several times to flash my rom and yeah i see the USB text in the corner of the screen, so im 100% sure the USB is working..
but im gonna try to flash it with the BUTTON ROM
are there other roms wich i can use for flashing my mda?
i mean wich roms are good for flashing my mda that stucked in bootloader..
cause the other ROMS didnt want to connect with my mda !
i was halfbaked when i typed this text..so sorry for my grammar et..
Related
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
DESPERATELY NEED HELP.
Every time i connect my wizard to my machine using the USB cable, i get the following message in baloon.
"One of the USB Devices attached to this computer has malfunctioned, and windows does not recognize it."
It appears as "Unknonw Device" on windows device manager.
This started happening when i changed my ROM to AMP.v2.Vanilla. Prior to that my wizard was connecting fine. I have been trying to resolve this for days now but no luck.
Following are the things i have tried.
1. Un-installed Activesync & re-installed.
2. Soft & Hard Reset the device.
3. Tried going in bootloader so that i can install my preivous rom, but the machine still doesnt recognize the device and gives the same message as mentioned above.
4. Removed all the USB controllers and re-installed in the machine.
5. Tried on different machines but same results, so its not machine specific.
6. Tried with a new cable to so its not the cable, it has to be the device.
Anyone who can help with this. I am sure i am not the only one having this trouble.
Any kind of help is appreciated. Just need to connect and go back to my preivous rom.
FYI: I am running WINXP SP2 on my machine.
ROM: 10.0.0.10
Radio: 02.69.11
Protocal: 1.1.13.30
Thanks in advance.
Nick.
You can flash in bootloaders mode,its not necessary to activesync.Get you phone in Bootloaders (tri color screen) by holding down Camers button and either Soft Reset or push Power On button,it'll go into bootloaders,hook up the phone with pc via usb cable,watch small usb appear at the bottom of the bootloaders,its good to go and run the RUU in the Rom,it'll start to flash and upgrade.Solve the activesync problem afterwards.
Thanks for the reply mate but i have already tried that.
I went into the booloader and connected the usb. It does show USB at the screen, however my PC doesnt recognize it and the RUU doesnt run. It says to connect the device.
I am not at all worried abt the activesync. Syncing is the last thing i'll think. I just want to connect and go back to my previous rom.
Any other suggestions.
Please see attached screen shots.
This sounds like a hardware issue on your phone. I doubt this works but go to start -> settings -> connections -> usb-pc and either check or uncheck the box then close that app.
If that doesn't work Search for the thread on flashing from the miniSD card. But again, this sounds like the usb on your phone has failed.
I have tried checking the USB to PC and unchecking it. No help with that.
One more interesting thing is the phone does get charged with the USB cable, just doesnt connect.
Will check the thread for flashing from minisd.
Thanks bunches.
hmm,
Hard reset your phone and uncheck the option 'allow network connections' or something in the phone settings...> connections...> usb to pc
This error occurs when there is an “open port error” before upgrading ,You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again. disable or stop any antivirus/firewall running or any other such program which might be hindering the flash,don't surf the net.
Kill 'WCESCOM' altogether,in the Task Manager,stopping activesync.
nick_shire said:
I have tried checking the USB to PC and unchecking it. No help with that.
One more interesting thing is the phone does get charged with the USB cable, just doesnt connect.
Will check the thread for flashing from minisd.
Thanks bunches.
Click to expand...
Click to collapse
hmmm,you got a connection problem buddy,the mini usb port of the phone is broken or damaged,you cannot flash with sdcard method,untill you already had made a backup of the rom earlier and saved it on the sdcard.
Get the mini usb port of the phone repaired or you can try to wriggle it a bit and check if it works and try to hold it there in that possition till the flash completes.
IS there a place i can get step by step process of flashing through SD card?
For all the forums, i am not able to understand anything./
Even the mtty doesnt work, it doesnt open the usb port.
No Luck as of now.....Am very desperately waiting for any Saviour....PLEASE
No other way out,except to get the freakin mini usb port repaired or replaced.
zabardast_1 said:
hmmm,you got a connection problem buddy,the mini usb port of the phone is broken or damaged,you cannot flash with sdcard method,untill you already had made a backup of the rom earlier and saved it on the sdcard.
Get the mini usb port of the phone repaired or you can try to wriggle it a bit and check if it works and try to hold it there in that possition till the flash completes.
Click to expand...
Click to collapse
Dang, thats right. I forgot that on the Wizard you can only flash a previously saved rom image. Can't just flash roms like you can on the Tilt.
Yep, basically, you have to get the USB port fixed as you are stuck where you are currently at on the Wizard I'm afraid.
Thanks guys. Have given my Wizard to get the Mini USB Port changed. I have my fingers crossed. Hope it works.
What exactly happens to the mini usb port?
I am having the same problem syncing.
The phone hooks up, charges, and makes the "connected" sound when I plug it into the usb port, but NO activesync...DOH!!!
Honestly, i couldn't figure it out.....no one seems to know whats the cause. The phone is bricked. It wont even start now... and its lying....
I am using an LG KS20 these days.....
Let me know if somebody happens to find a solution for that.
nick_shire said:
Honestly, i couldn't figure it out.....no one seems to know whats the cause. The phone is bricked. It wont even start now... and its lying....
I am using an LG KS20 these days.....
Let me know if somebody happens to find a solution for that.
Click to expand...
Click to collapse
Dear NIce_shire,
i am having the same problem and i got it resolved just by holding and tightly pressing the mini usb in my device. Its basically the problem with mini usb port of pda (Hardware) not a software one. Get it reparied from market or do it by urself. Good Luck!
USB link?
Hi mfrazzz
I have the same problem - USB link stopped working after a Radio upgrade. Definitively not a h/w USB miniport problem. Even when I get the Wizard G3 phone into bootloader and the USB word is at the bottom in the white line, flashing ROMs does not work as the RUU reports Error message stating no USB link (BTW, ActiveSync also reports no mobile device present and doesn't connect).
Is this a bricked phone then?
Thanks.
DesperateDan
PS The set is an MDA Vario and I had successfully installed S.V.I.s Manila 4.5 Beta (IPL 1.01, SPL 1.01 shows now, but was IPL 1.01, SPL 1.06 prior to installing Manila and Radio was 1.12.10 and I upgraded it to 2.69.11 and then the bloody thing stopped working and the USB link can't be enabled again)
Dear all,
I was facing the same issue of "USB device malfunctioned" and got it resolved yesterday. Its not because of software neither coz of cable (i did changed lots of cables but faced the same issue), its just because of mini USB in device. Its working perfectly alright now, it may not be replaced even dont need replacement at all. It needs minor soldering, even you can do it by urself. Just open 4 screws at its back (two under the camera cap one is below stylus placement and 4th is on opposite side) and open it. No need to be worried about......
Regards,
Barjees
Hello everyone. I have the kaiser from 3 months. I didn't use it the last month and when I plugged to the pc usb it show me some crazy stuff. My baterry was empty when i first turn it on now, but it gest charged with the pc usb.
I am using l26 v8 light ROM - http://forum.xda-developers.com/showthread.php?t=400118:
R 1.58.25.17
G 25.69.30.05H
D 3.28.00.00
The hard-spl is v3.29 .
When i first get it now, what I did first was to format the SDHC 4gb card cause i saw a new version of the leo's rom. Then I turn the Kaiser on and saw the empty battery. I did 3-4 hard resets, preinstall my windows, preinstall m$ activesync 4.5, tried on another pc but still the same. I don't put any sim card to it. Still nothing, any help ?
Hard reset :$
This was only option for me.
Or try other usb port, or on other deviece.
sorry to ask this but did ur mini usb cable is in good condition ?
have u tried to flash ur stock rom & try to connect with ur PC?
my mini usb is in good condition. i have 3 and tried them all.
I haven't tried to flash my stock rom for 2 reasons- i don't know where to get it from and secondly how could i flash it without usb connection ? Error 260 then i try any ruu.exe files ;(
edit: i have some soft on my sdhc which i formatted first and then turn on the phone from a month with an empty battery- could that cause something ?
hang.tuah said:
sorry to ask this but did ur mini usb cable is in good condition ?
have u tried to flash ur stock rom & try to connect with ur PC?
Click to expand...
Click to collapse
Try what Hang sad, and check in Activesync if USB conections are alowed if u can try another usb cord. Wich Windows do u use?
of course u can use ur SD to flash ur rom. card reader will help. for more info maybe u can read the wiki there were many stock rom available for download.
@theclear tried it with 3 different mini usb cables, on 2 PC,on the first pc I preinstalled the windows xp. All PCs are running winXP.
@hang.tuah my kaiser is from orange UK, which rom do you advice me to flash from ???
and another question, when i put a stock rom would i again install the hardspl and the other stuff or once they are installed there is no reason to do that ?
So flashed a new rom - [June 25] L26_KaiserDiamond_V9 (new source!) and again it still the same problem ;( What if I flashed another ROM ? Not a stock rom but another ?
1.71.09.01 install this rom now and it is still the same ;(
i would try to connect it to another pc to make sure that some paranoid 3th party program you installed dident decide to black devices trying to connect using usb
Rudegar said:
i would try to connect it to another pc to make sure that some paranoid 3th party program you installed dident decide to black devices trying to connect using usb
Click to expand...
Click to collapse
this is the second pc that i try to connect it, with the first pc i preinstalled windows and still nothing ;(
edit: now installed an orange rom win wm6.0 still the same problem ;(
people, now find this post http://forum.xda-developers.com/showpost.php?p=2358041&postcount=43
looked mine and the pin is not in its place. may be that is the cause. mine problem is the same - the second pin -how possibly i could pick it up alive :S
OOOK finally how it work with a knife modifying The black thing of the usb was able to pul it down and get the thing up again. 10x vary much !!! !!!
HELP PLEASE!!
Ok so i think i bricked my wizard!
I have the t-mobile MDA wm5 unlocked g3.
I've flashed it to the WM6 Rom and everything had been working well, except there was no MMS feature on the phone at all which sucked! . My girlfriend thought it would be better if she did the "windows mobile update" icon feature that was on the phone to speed up the phone....She downloaded the updates & my phone shut off!! When it rebooted everything seemed normal...
1st.
T-mobile screen
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
-Then i get the green windows mobile splash screen, but after i get an error message!!
*Device Authentication*
“Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
3563820017905901 38000050bf3f5173”
Ive tried to boot in safe mode to try & flash my phone again but for sum reason my computer wont recognize my phone is plugged in! What do i need to do?!? Please help, any help is thankful!
is not a bricked wizard men
easy men easy... but please tell to your girl dont push everything that she dont nderstands... Everybody knows that upgrade official is only for original OS like windows XP or VISTA..
Firs of all
Put your Wizard on bootloaders mode... plug in via usb the PC Active sync wont recognize your phone.. then run the original shipped Stock ROM and then your Coocked rom...
But if the PC at the same time you place your Device on Bootloaders and plug it via USB... shows a pop up message that said Windows cant recognize your device or unknown device or something... Restart your Pc... Hard reset your PDA... and replug your Device as I said it before... if not check your USB cable maybe a broken cable failure...
IF NOT?????!!!!!!!! then Use another PC with XP!!!!!
If it still on his not reconized message you are in serious problem but your girfriend Too...
Good luck
Easy..."Device Authentication failure" is caused by your ROM. Just flashing another custom ROM and the message should go away.
I'm surprised that the chef that made your WM6 rom left the Windows Update feature in there, it was bound to crash a cooked rom, since the update service never worked properly anyway.
I'm sure flashing another rom will resolve this.
yeah, flash the rom (you might want to try WizFlo 20273 v6.1.1.3 - i'm on it, and loving it). heck, you can even do a hard reset and that would probably resolve it.