I think my keypad is jammed. I don't use it much, suddenly my picture application keeps opening and my contacts start searching for the repetitive letters 'edfcedfcedfcedfcedfc.....'
Also my off button is not working, once the screen goes off, I need to soft reset.
HELP PLEASE.
thanx.
Mexy
help please?
Mexy said:
help please?
Click to expand...
Click to collapse
Have you tried hard resetting the Kaiser after a backup?
It might be a software issue.
I am having the exact same problem. I keep getting the letters edfc typed on my dialer. I unfortunately don't think its a software problem. Read my thread directly below yours.
Related
I noticed a co-workers phone has "Reset" software installed on it and he installed a ROM from this site that had it included. I am trying to add it to my Tilt but cannot find it anywhere. The biggest problem is search for the word "Reset" finds so many off topic things. I have honestly been searching for about 2 hours now.
The software is simple, run it and it does a soft reset just like if I were to push in the button on the bottom of the phone with the stylus.
Does anyone know where I can find this?
try pshutxp
phsnake said:
try pshutxp
Click to expand...
Click to collapse
Worked great, thanks for the quick response.
Hi guys,
I changed my SIM and afterwards while booting the kaiser is telling me, that the SIM-door is not locked, but it is. A little, 1 mm, big thing was coming out, it´s placed under the little metal-thing nearby the lock, so the damage can´t be from my side..
The mobile is three month old, but I loaded another ROM, so I´m not sure how it is with the guarantee. It´s a hardware-damage, so it shouldn´t be a problem.
Or is there a possibility to put the original ROM on the Kaiser? The mobile is not starting up, message is coming and turn of the phone automatically...
Any ideas?
cheers,
brasax
Search, search, search...
brasax said:
Or is there a possibility to put the original ROM on the Kaiser? The mobile is not starting up, message is coming and turn of the phone automatically...
Any ideas?
cheers,
brasax
Click to expand...
Click to collapse
Your answer is here: http://forum.xda-developers.com/showthread.php?t=335568
svcglobal said:
Your answer is here: http://forum.xda-developers.com/showthread.php?t=335568
Click to expand...
Click to collapse
My mobile is not starting up, because it automatically shuts down after ten seconds. So, how should I flash a new ROM, if I get no AS-Connection established? Your link is not helping..
Anyway, found the problem and the Kaiser is working again..
How did you resolve the problem!
I am facing exactly the same behaviour as yours.
How did you resolve the problem?
Cause of 10 second shutdown
Alexandre C Guerreiro said:
How did you resolve the problem?
Click to expand...
Click to collapse
Not sure this is your problem but if you study the little microswitch at the end of the sim bay, you'll see it's possible for this not to mate correctly with the groove on the sim door latch if the switch has been moved independantly of the door lock. It's that little switch being in the open position which causes the flagged up message and 10 second shutdown. Realign them both back to the correct position and the problem should be gone.
that was exactly my problem..
hey ive been having this problem for the past couple days and was wondering if anyone has experianced the same thing or could shed abit of light on it.
basically whenever writing a text, or word document or typing a web address, etc and i click on the letter "w" nothing comes up and the phone crashes, doesnt let me type anything, goes super super slow and doesnt really respond to nething so i have to reset it. this happens when using the "w" on the on screen keyboard and on the pull out keyboard.
i havnt dropped it recently and its in perfect condition, also havnt installed anything recently that may hav caused it. it just seemed to randomly start happening. will have to try a hard reset if theres no other solution, but any ideas would be greatly appreciated?
I would suggest a hard reset. If it is a software error that should do the trick.
But i guess this has something to do with hardware. I had that problem with my wizard. The commanager button caused the device to crash. Once I opened it I found about 1 kg of dust sitting behind the button. Once that was out of the way the device was normal again.
edit: Just try opening the device as a last resort.
here you can find the service manual. Link removed - no longer valid
thanks mate, may try a hard reset then. but i'll leave it till weekend after exams have finished as its quite time consuming installing everything again, etc.
i perhaps should have mentioned that it only crashes if "w" is the first letter i use. if i type something else an then use it, it seems to work. (altho i havnt tested this properly, i'll assume this is usually the case). just seems like a very strange problem to get
anywayz, thank you for ur advice
nice screen name Is this a stock ROM or a cooked one? maybe the keyboard fix would correct it?
fade2black said:
nice screen name Is this a stock ROM or a cooked one? maybe the keyboard fix would correct it?
Click to expand...
Click to collapse
haha thank you.. umm.. its the default one that came with the t-mobile mda vario III. was working fine up until the other day.. whats this keyboard fix u speak of tho?
I have almost the same problem with my "w" key also. I have to press it longer than i do other keys to get it to type a "w" and when i do it causes a slow down on my phone.
sounds like its time for a song..
http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=1022602
lol.. u can spell out the name of the band without the letter W.. so its good.
flobots - No "W"
anyway.. on topic.. wat rom is A7LAS using?
Hello everybody! This is my first post.My name is Matt, I'm from Poland.
I have big problem with my Kaiser ;/ When i want click something on the screen by taping or clicking a button, the phone dont reaction
Please help me
When you say there is no reaction, do you mean that the phone is just slow, and takes a few seconds, or do you mean that the phone doesn't acknowledge the tap at all? If it is the second one, it may be a hardware problem. How long have you had the phone? When did this start happening, and did you do anything you think may have caused it?
Dave
i have Kaiser six months.Maybe You're right, this is possible hardware problem ;/
ohh my God
Soft then Hard Reset?
I had a similar issues many months ago. I still don't know what locked it up, but I ended up hard resetting, which cleared it up. Thank God for SPB backup.
Good Luck
Ok, I do a hard reset and check the problem again
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know