Related
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
you obvious did not read all the recommenced sites! My guess is that you tried to run the upgrade file in pocket pc. You must connect your phone to the computer and establish activsync connection first. than you run the upgrade file on your computer
gonzo11 said:
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
Click to expand...
Click to collapse
Navy2010 is correct you are running the updates from your PPC this won't work. You must run the programs from a PC. I also suggest a little more reading.
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
Make sure you have CID unlocked the device.
Kirby
Thanks Gents but one more question for u?
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
Sounds like a hardware failure and could be the reason the phone was sold... ?? If you can return it under some warrantee, I'd lean that direction.
--M
I agree.
Yep I agree. I have sent an email to the seller. In all fairness He sold me a brand new device and he has been pretty good so far. Let see what he says now. I'll update the post when he gets back to me. Thanks for you comments.
Seller has sent me an RMA form
I guess he is going to repair it or replace it.
He emailed me an RMA form which I have sent back. Saga continues.
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
I have had this problem but in reverse it turned out to be muck under the screen and would cause the start button to activate by just pushing the side of the case.
Get a laminated buisness card or something like it and slide it in between the screen and case
You may have something here
Thanks Eddieitman. I tried it and nothing much came out, but usually after a few mins the screen locks up. This time it's still responsive after 15mins. We'll wait and see after an hour if it still works. fingers are cross.
btw nice site.
Still locking up but a little squeeze works. lol
I am talking about the device. lol Unfortunately, it's still locking up. But when I squeeze the sides of screen it comes back. Sounds like my situation maybe a little worse than yours. I going to send it back and see what they do. thks for the help.
Screen issue not covered by warrantee.
This is a Update/FYI.
I sent my phone into Arvato Teleservice out of Germany to fix the screen issue. $97.00 cdn to do so. First off their customer service is absolutely horrendous. So avoid them.
They determined the issue to be a damaged Main Board, but because of the flashed ROM they are not going to do it under warrantee. I should of downgraded before sending it in (my fault). I am still fighting with them.
Cost to fix $490.00repair + $97.00shipping = buy a new phone.
I am not suggesting it is a result of the ROM but wondering has anyone experienced screen issues after flashing the ROM?
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html
I've searched and could not find an answer. So I'll just start a new thread.
No matter what radio I use, no matter what ROM I flash, I cannot get my screen to respond to taps.
It was responding to manual buttons but no touch. I flashed to a new ROM hoping that would fix it, but now I can't even past the calibration screen...
This all just happened suddenly too. I have been using an iphone for the past couple of months so I have not been too concerned. However I wanted to use my kaisar as a modem at an offsite sales event but it's still the same....
Probly been asked a few times, but I took the plunge away....
Flame or answer away....
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
hang.tuah said:
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
Click to expand...
Click to collapse
That may work. But I'd rather not downgrade to 6.0 if that is not the problem. Plus I have no valid warranty. ATT Tilt is from the United States and I live in Canada...
ccaparli said:
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
Click to expand...
Click to collapse
I have tried 2-3 Hard SPL's.
I suspect that it has something to do with the Hyperdragon 3 Diamond ROM. All my problems started when I flashed that paticular ROM.
I will try downgrading to 6.0 and see if that does the trick. I somehow doubt it though. I think that this may need another, trickier remedy, ie: unbricking a bricked PPC.
I was sort hoping that this was a more common problem and advice would be more readily available...
So I downgraded to the original ROM, but still the same problem. Perhaps if I also downgrade the SPL. Does anyone have this file?
Btw, though I am not a developer or anything I have been flashing ROM's for awhile.
This problem just came out of nowhere...
bump...............
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
KMFM$ said:
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
Click to expand...
Click to collapse
Ya, I forgot about that thread. I haven't used that since I upgraded my spl to Hard3.28. I can understand why I would get problems with the RESTORED STOCK ROM that I flashed my device wouldn't work with the latest Hard SPL, but why would this occur with a ROM it was supposed to work with.
This wasn't something that happened after I flashed, it just happened out of nowhere... They key to fixing this understanding WHY. it may or may not be the SPL...
last bump...
jzalapski said:
last bump...
Click to expand...
Click to collapse
After you flash a rom or hard reset, are you able to get past the screen calibration?
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
liquidfork said:
After you flash a rom or hard reset, are you able to get past the screen calibration?
Click to expand...
Click to collapse
No. I figured the problem had something to do with the SW, so I just flashed figuring that would fix it, but now it's basically useless (not like I'm using it right now anyway, but)...
timurg said:
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
Click to expand...
Click to collapse
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
jzalapski said:
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
Click to expand...
Click to collapse
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
timurg said:
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
Click to expand...
Click to collapse
step 1: Create File on SD Card
step 2: ...
step 3: Profit
I had a similar problem on my trinity. It was an hardware problem, a spoiled thin strip that is between the LCD and front cover. As someone told me that
send it to warranty would take a long time to get it back I replaced myself the strip and now is working...
It's probably a hardware issue. You will have to replace your LCD+Touchscreen and if that doesn't work, you'll have to replace the flex that connects the LCD with the motherboard itself.
I fixed a TILT with that problem. I ended up buyina a new LCD when the problem was caused by the flex
PS, LCD screen is way cheaper than the flex.
Hey. So it looks like I did buy a replacement warranty. So I took it to my guy and he said that he would just replace it. He asked if I wanted the same one or if I wanted to pay the difference and get a new one....
I paid an extra $250 and got a diamond...
Problem Solved.... See you in the Diamond Section...
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
maxxis said:
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
Click to expand...
Click to collapse
I had a similar problem with a Wizard and it turned out to be a bit of dirt that was stuck under the screen on one corner, resulting in constant contact that prevented the device from registering my taps. I removed the screen and cleaned it thoroughly to fix.
Also try "rubbing" the screen in each direction with both thumbs to see if you can slide the screen around and dislodge any dirt from the edges. The screen will move around slightly under the case without damaging the device.
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Please help meee My phone now is more slow than normal :/
That happened to me a while back, I took it apart several times and checked connections etc. but that did not fix it. I ended up buying a new LCD off of ebay which fixed it perfectly. So, I would suggest doing that (I bought one for 15USD used).
But this to me seems to be a problem on the main board, because the phone sometimes gets really slows And sometimes that white problem appears and others not, like 90% when i need to use my phone
Flash Stock ROM?
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
i think RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40. 02_1.65.17.56_Ship is an OEM rom isnt? :x
P4k1t0 said:
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Click to expand...
Click to collapse
did you ask in the proper thread before starting a new one?
msd24200 said:
did you ask in the proper thread before starting a new one?
Click to expand...
Click to collapse
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
P4k1t0 said:
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
Click to expand...
Click to collapse
noticed when searching all your post that you went straight to starting a new thread for this instead of asking in on of the flashing threads. http://forum.xda-developers.com/showthread.php?t=533976
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
P4k1t0 said:
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
Click to expand...
Click to collapse
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
msd24200 said:
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
Click to expand...
Click to collapse
Dude i can enter on bootloader yes, can i use my phone yes! but the problem is that sometimes (i mean, like all the time) the screen stay white when i turn it on, and the phone stays slow!!!!
jsgjm said:
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
Click to expand...
Click to collapse
i have tried that rom too, but nothing the problem is here
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
zelendel said:
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Well, if is about the screen, i can say im safe :x
But one thing on my mind, the white screen i could say to change the screen to one new, but the problem is the kaiser stay a bit slow, and sometimes it dont respond to what i want!
With that stay thinking that the problem is about the mainboard or something like that :s but i hope the problem is the screen, i will buy a new on ebay
The ribbon cable for the digitizer (touch screen) attaches to the LCD, and then both signals feed through the same cable into the D-pad board, so its possible that there is a bad connection somewhere in the LCD/Digitizer assembly that causes it to not sense your inputs, even when the LCD itself is working. Mine just failed completely to a white screen and did not come back. It could be something besides the LCD..try flashing a new HardSPL and/or a different ROM, but if I had to bet, I would bet on the LCD.
zelendel said:
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Thankyou made me chuckle
P4k1t0, I know you're frustrated that you phone doesnt work, but do not get uppity at the other forum posters. If you sound off against msd24200 and a mod sees it, its likely to lock your topic.
i had the same situation two weeks back after i flash with my own cooked rom.
what i did is flash the stock rom through SD/storage card and everything is fine.
you already try this method ? you can search on how to flash from SD/storage card
to flash by sd card? ok ok i will try it right now to see
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance