Database Develop

P3600i Flashing Tutorial

OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have

Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o

o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.

about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66

should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks

whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.

Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.

gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol

Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?

gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.

woot it works! thanks

zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while

joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.

Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!

Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL

genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.

genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?

All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!

Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help

i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery

HTC Touch HD T8285-WM6.5

I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?

ryche316 said:
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
Click to expand...
Click to collapse
Have you read the Dummies Guide? If not, you should do this. Just try some roms to see what fits better to your needs.

Assuming you hardspl or setup for USPL prior to flashing any ROM's. I have the 8285 and run the following ROM's: NRG LEO, PDAVIET LEO, and MIRI's LEO based ROM's. I personally keep going back to NRG as I have followed him from other devices and like his work. All the cooks are great. I also flash from SD card vs. using Activesync, find it faster and more reliable.

NRG is clean and mostly bug free ? yea from what you're saying maybe I did do something wrong. I'm not too advanced on this, I downloaded the energy rom and tried to update it. I've done nothing previous

ryche316 said:
NRG is clean and mostly bug free ? yea from what you're saying maybe I did do something wrong. I'm not too advanced on this, I downloaded the energy rom and tried to update it. I've done nothing previous
Click to expand...
Click to collapse
well then that's why you're having problems for sure. as others have mentioned follow the Dummies Flashing Guide. if you're using HardSPL, make sure the top (RED) section of your bootloader looks like this Pic of Bootloader with HardSPL. when it looks like this, you're ready to flash a ROM!!

OK I found the 156OliNex.zip file. I put the phone into bootloader mode, when I tried to launch the file it would not execute. It flashes up on the screen for a second and that's it. I made sure that the windows firewall is turned off

Best, the least error, safest flashing tool USPL
i highly recommend you use USPL : I still yet have to see someone who had a problem after using USPL. This is even endorsed by Dutty Throy (you can see that he even states that this is the SAFEST METHOD) - Moderator ROM Cooker par excellence!
look here
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file). copy this two files in you formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
if you're using Vista see this to update your sync driver
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
flash the ROM.
please let me know once you've done this succesfully, i wish you the best of luck!
ryche316 said:
I have been trying different roms to try to upgrade my phone to WM6.5 and so far the roms I've tried won't even load onto my phone. The download status bar will come up but it goes nowhere then it says update error. The phone will turn back on and work with the stock WM6.1
I'm just looking for a very clean OEM style WM6.5 ROM. Any recommendations?
Click to expand...
Click to collapse

You need to start posting in the Dummies Flashing Guide as posted above as this thread will be closed as soon as a mod comes across it. You'll find all your answers and help there

ryche316 said:
OK I found the 156OliNex.zip file. I put the phone into bootloader mode, when I tried to launch the file it would not execute. It flashes up on the screen for a second and that's it. I made sure that the windows firewall is turned off
Click to expand...
Click to collapse
do you have .Net installed on your PC? if not, you need to install first. if you have .Net installed, retrace your steps to make sure you've got everything setup properly, e.g., installing the driver supplied in the thread. also, if you have problems please post your questions in the Dummies thread...the moderators will close threads like this one because "all" the info you need to flash can be accessed from the Dummies thread.

yes I have NET installed on my computer. I tried using the files in the dummies guide and had issues

OK. so I finally got the NRG energy rom installed and it shows up distorted on the screen.

ryche316 said:
OK. so I finally got the NRG energy rom installed and it shows up distorted on the screen.
Click to expand...
Click to collapse
if you're using a WM 6.5 ROM then you do not have the right SPL installed.... look at Post #5 and make sure your bootloader looks like the one in my picture; if it doesn't then you haven't installed SPL 1.56 Olinex. again, please post your questions in the Dummies thread, you'll get appropriate help there... thanks!

I want to thank everyone for their input. I finally got a rom installed and working properly

I just wanted to thank everyone for their ideas and input. I finally got a rom installed and working on my phone

glad to know you were successful! we've all been there before and i know it can be frustrating. patience, diligence and patience (lol) will get you there!

Solution found, thread closed

Another scream for help...

Hi,
I have my HD from march and being interested in WM6.5 and disappointed by HTC because they do not release an upgrade I decided to try some cooked roms.
I used USPL so that I can keep my original SPL.
I tried:
* Duttys WM6.5 Sense 2.1 Holy Grail
* Duttys WM6.5 Leo Holy Grail
* Topix HD
From the first boot I have noisy screen image with 4 colours or something .... but after entering in sleep mode and restore it recovers to normal "true color" until I reset the device. I can live with that but the real issue is that I cannot start my phone using the original radio neither with the latest versions I found for HTC HD. No error there, it simply stays off after I confirm that I want to enable the phone.
Also the device is hanging for very long time now and then and I have exactly the same problem/behaviour with all the above roms. I tried some fixes found in the forum but nothing works and I did not found anybody with the same weird behaviour.
I wand to recover my stock firmware but I found that even I brought mine from Romania it has a Czech S/N and HTC does not provide a stock ROM for this "v1.56.402 - Czech republic - not supported".
What can I do. do you guys know if I can get the original firmware from somewhere?
Thanks.

Obviously you havent bothered to read anything let alone the guidelines of starting new threads.
The answers are in the forum I suggest you take time to read and start by reading the forum guidelines and the sticky threads.
If you dont understand what you're doing then stick to a stock ROM until you do or you might brick your phone.

You say that you used uspl. Are you sure that it was successful as the symptoms you describe are typical when you have the incorrect spl for the rom you are using. After using uspl, what spl is showing in the bootloader screen?
Follow the steps in the Dummies Guide to Flashing and your problems should be sorted out.
If you still have further questions, post them in that thread as the mods will close this one as soon as they come across it (as explained by homer285)

you're ok as long as you can still go to bootloader mode, then go back to the uspl 2.5 guide here, FOLLOW INSTRUCTIONS STEP BY STEP
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file) OR BlackstoneRUUWrapper (whichever the ROM cook presents) copy these TWO files in your formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
if you're using Vista see this to update your sync driver
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
flash the ROM.
I hope I make the above clear to you.

suggestion: Read the howtos!
If I was you I would do like this:
- flash hspl.
- flash latest radio from memorystick
- flash any 23xxx-rom from memstick (miri or phamQ can I recommend).
Cant understand why you are doing it the complicated way... there are ways to recover to original-spl if needed. This is the easyest way to flash 6.5 and it is almost fail-safe.
good luck!

brumbrum said:
suggestion: Read the howtos!
If I was you I would do like this:
- flash hspl.
- flash latest radio from memorystick
- flash any 23xxx-rom from memstick (miri or phamQ can I recommend).
Cant understand why you are doing it the complicated way... there are ways to recover to original-spl if needed. This is the easyest way to do it and it is almost fail-safe.
good luck!
Click to expand...
Click to collapse
dont add to the confusion, he is already using USPL, the SAFEST METHOD as stated by Dutty Throy, he even advocates this in all of his cooked ROMs
all he needs to do is to redo the steps again as i posted above.

Sorry for my panic post
Yes, after 8 hours of trying stuff I did not read post guide-lines but I searched all the internet and xda forums, tried all the dumb fixes for my weird behaviours without any success.
I am sure that my original rom it is not available and I call for help from people that have Czech S/N English version to extract the flash and the radio if it is no so complicated or if they have it as backup.
Actually I read every "flashing for dummies" posts and only when I thought I got everything I started to flash it.
I used the latest 2.5 USPL, the GUI one and also the command line from the cmd prompt so I saw all the output lines and there was no error at all. It is clear that the device was successfully flashed and I respected all the version requirements stated in description of the packages. The problem comes from some sort of incompatibility. The versions at boot is the right one.
The only wrong thing I did was after seeing USPL 2.5 coloured boot loader I go on with the tutorial which said to read on screen RUU instructions which said to connect with activesync and I did as they said and restart the device, cradle and continue flashing in which case the original SPL started and I got a flashing error on the desktop client but after restarting the device everything run normally with the stock firmware and I think I have a good understanding on how it work and I can say that that error does not hurt a bit.
I finally succeed, in the morning, to flash 6.1 vanilla topaz and almost everything works except the GPS module and I am investigating this issue.
It is clear that you cannot help me an my device issue related to WM6.5 roms are unique and I will investigate this on my own.
Sorry to everybody, again, for my wrong located post and have a nice day.

I hate to say this but..... HELP!!!

I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...

Near enough the exact same situation as me! I think that 1.15 file may have issues.

wayneroughneckz said:
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Click to expand...
Click to collapse
If you are getting an Error 262, you need to run manual sspl in order to resolve this. Read this post for the steps (post #2) and sspl tool (post #1) - http://forum.xda-developers.com/showthread.php?t=505377. You can also get all of the steps needed to successfully flash. if you have questions, please post them in that thread.

It seems when I restart my phone normally, I noticed that the message about " This concludes the beta test for this software release....... blah, blah" the manila interface was behind it when I press the task manager and the volume buttons it responses means its not bricked (hope so) maybe the reason why I cant flash anything? Or whatever...Well that's my observation..... Please guys I needed my phone badly tomorrow

Did you not read my post . You can flash another rom, error 262 is common. You just need to use sspl before flashing to hspl 1.56.

if ur stuck with hspl and cant flash that than try uspl or try stock rom.... they get installed without hspl or uspl installed.... its available in the blackstone wiki section

and with stock rom get through tomorrow . than try hspl or uspl with custom rom later on when u have free time

Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.

Apologies on replying again here instead of posting on the designated thread , but forgive my innocence the thread says "" launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC. "" how exactly that's going to be done? Currently I got the tri-color screen saying SPL-1.15.0000 and a USB on the bottom and when I flash either hspl or uspl I always end up on gray screen with a 0% that doesn't move at all, how can I manually apply SSPL? I cant access Manila interface because of time bomb message? My life's getting complicated!

If possible try flashing from an XP box, Vista/7 might give you some additional trouble if you don't use the right drivers. But if you get to the 0% screen, the issue shouldn't be with the SPL... so don't worry, I doubt the phone is bricked
So: try XP and/or using the drivers provided in the Flashing-thread

zerozed said:
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Click to expand...
Click to collapse
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID

wayneroughneckz said:
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
Click to expand...
Click to collapse
Did you downloaded the ROM from the HTC site? If the ROM is from the official site try again using USPL.

I seach the wiki page and found the latest version which is "Blackstone_WWE_1.56.405.1" and I can't find it on the official site, it should be "WWE" not specifying on certain countries, so I manage to download it from Rapidshare link. and for the SSPL I don't think I can do that coz I can't access my phone coz it has tim bomb probably the main culprit here.

Any flashing problems should be posted in Dummies Guide thread.
Thread closed

Can't flash anything to phone anymore

Hello,
I installed the latest kernel(the very last one of clemsyn of post 199) from the kaiser kernel thread and now my phone doesn't flash or even boot into ANDROID
When I try to boot into Android, the final lines are:
Install module for this kernel
apply modules/androidupdat.tgz
Failed
from sourceforge​
When I try to flash another kernel:
1. I get the tri-colour screen with the following on it:
KAIS130
SPL-3.34.0000
CPLD-8
Serial (this is written in the white part of the screen)​
2. I get the white screen past the tri-colour screen with an consistent loading.... on it. This doesn't change​
THE 1 AND THE 2 ARE DIFFERENT SD CARDS.
I flash with:
KAISDIAG.NBH from http://forum.xda-developers.com/showthread.php?t=680518
KAISIMG.NBH from different sources and the RUU_signed.nbh renamed to KAISIMG.NBH from ''Kaiser_HTC_ASIA_HK_WWE_3.34.721.2''
PLEASE HELP...

1st DO NOT DOUBLE POST.
2nd, did you install Hard SPL ?

If you want a answer to your question please change the title of the thread.
I'll edit the post with the answer after that.

http://forum.xda-developers.com/showthread.php?t=433835
For flashing windows mobile I used the above link, the link talks about using HardSPL so I suppose I have HardSPL installed, but I don't know for sure cause this was so long ago. Is there another way to check...
Also if we are able to flash kernels, isn't that to be seen the same as flashing Windows Mobile roms. If that's the case I must have hardspl installed. Because Dave Shaw says that you can't flash roms with a sd card unless you have Windows Mobile installed: http://forum.xda-developers.com/showthread.php?t=423486&page=34
DaveShaw said:
IIRC you cannot use the SD card to flash a ROM unless you have Hard SPL.
Ta
Dave
Click to expand...
Click to collapse
As a solution I tried to put Windows Mobile back, I got the update utility on the pc and the phone loading for 1% and then it would give an error: Invalid Vendor ID, anyone knows how to bypass this??
**I forced the phone into tri-colour screen mode, it was recognized by Active sync but it said to be not connected

Download the original windows mobile rom from htc site
download hard spl from tytn thread
put it in boot mode (tricolor)
flash original rom
do all steps for the new phone
flash hard spl (follow the guide in tytn thread)
flash the radio if needed
follow all the steps in atools guide
Merry Christmas!!

l1q1d said:
Download the original windows mobile rom from htc site
download hard spl from tytn thread
put it in boot mode (tricolor)
flash original rom
do all steps for the new phone
flash hard spl (follow the guide in tytn thread)
flash the radio if needed
follow all the steps in atools guide
Merry Christmas!!
Click to expand...
Click to collapse
There are a couple of problems with flashing the original rom, first I am unable to establish a active connection with active sync, one of the requirements to flash. ALSO MORE IMPORTANTLY when I flash it continues for 1% but then I get the Invalid vendor ID error and before my Android adventure this simply worked and I COULD flash the rom.
According to the HTC Kaiser wiki this can be fixed with flashing HardSpL, but when I try to do so it says error 260 the first time and error 262 the second time.

Dude, download the original rom from here:
http://www.htc.com/us/support/tilt-att/downloads/
Then switch your phone ON, holding the camera button, which will get you in a tri-color screen. Then plug the device in the USB cable with your PC. Active sync will not work. Don't worry, run the downloaded original ROM.
Then after that follow the steps from the previous post.

hom.hom said:
There are a couple of problems with flashing the original rom, first I am unable to establish a active connection with active sync, one of the requirements to flash. ALSO MORE IMPORTANTLY when I flash it continues for 1% but then I get the Invalid vendor ID error and before my Android adventure this simply worked and I COULD flash the rom.
According to the HTC Kaiser wiki this can be fixed with flashing HardSpL, but when I try to do so it says error 260 the first time and error 262 the second time.
Click to expand...
Click to collapse
Did you test with my instruction before posting?

IT WORKED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Apparently it matters whether you use the stock version for the HTC Kaiser while having the MDA Vario III from T-Mobile, which seems to require a different rom.
THANK FOR YOUR HELP!!