Bluetooth not receiving files and Bluetooth Exchange not working - Touch Diamond, MDA Compact IV General

hi, after a rom update i cannot receive files over bluetooth. i can send files ok. also, when i click on bluetooth exchange i get the windows 'working' timer for a couple of seconds then it disappears. my phone is visible to others but they only get a "bluetooth failed. retry?" message. my phone will receive the remote request ok from sony ericsson phones so it does receive a bluetooth request, just not for pictures/vids/tunes etc
will upgrading the radio file fix this?
if its any help, my bluetooth shows as '2.0/2.0+EDR'
thanks, kris
EDIT: i've changed the settings in the bluetooth tab on the touchflo screen to show as visible and receive files etc

Related

Please, am i missing something

I have searched through the posts and cant work out what i need to do, my bluetooth works for most things (syncing, sending files etc) however it cannot recieve files from another phone or pc. Only with activesync does it work to recieve.... Any ideas? do i need a new stack?
Cheers
Hello! Have you enabled "Receive all incoming beams" in Settings/Comms/Beam?
Thankyou very much, that was the problem. I thought beams were IR or something. One last question, i am now able to receive files but is there any way to browse the PDA via Bluetooth from my laptop? again it says, it cannot do this.
Navigation from your Laptop
Hi
You have to pair your BA with your Desktop installing the "OBEX File Transfer" service. So you would navigate in your PDA.

ringer disappeared

All,
Not sure what happened, but all of a sudden when I get an incoming call there is no volume on the ringer. If I switch to vibrate it will vibrate when a call comes in. I went to Settings-Notifications and confirmed there is a ring tone selected and I can play a test of it. Is there some other hidden setting I am missing? FWIW I am also running Goodlink 4.9 although it hasn't in the past caused any problems. Thanks.
I have also got this problem. Seems very weird. I originally thought it was because the dir of the ringtone file had changed - which it had. But i re-assigned the ringtone to a default tone and still it does not work.
Must be a registry thing - but where to look?
Anyone have any ideas on this?
Yep I also have this problem. Did you guys figure it out in the end?
I've had the phone replaced but it ended up doing the same thing.
Upgraded BA WM2003 to WM5 and Speaker Out Ended.
I upgraded my Blue Angel device from Windows 2003 to Windows Mobile 5 and then I had no Volume on my device. My phone still works but I have to have headset paired up or directly connected to be able to use it since the speaker function is non-existent.
Please note this is for all applications not only the phone, so I have no reminders or anything that used to use the built in speaker.
Any ideas???
Recently I also just lost my Connection Settings..?
I can't figure that out since I haven't done anything to it recently to lose these settings, no I can’t connect to the Internet or even create a new connetion.
I have tried hard resting as well as soft resting to a point when everything worked, however this still doesn't fix the Connection Settings or the Volume. I think the Volume is directly related to the upgrade, so I might upgrade the ROM again to see if that fixes it.
Any other ideas.....?
matt sb said:
All,
Not sure what happened, but all of a sudden when I get an incoming call there is no volume on the ringer. If I switch to vibrate it will vibrate when a call comes in. I went to Settings-Notifications and confirmed there is a ring tone selected and I can play a test of it. Is there some other hidden setting I am missing? FWIW I am also running Goodlink 4.9 although it hasn't in the past caused any problems. Thanks.
Click to expand...
Click to collapse
When you tap the volume icon on the taskbar, do you see both sliders set to high?
Hi
I have exactly the same problem since several weeks. The TyTN II has been 3 times sent to the repair centre and the problem still exists! The device is completely useless if it's not playing the ringtones.
Hi all
It's very likely that's because you all have installed an external MP3 player (like Pocket Music). When you did so, the app registered .mp3 extensions as a PocketMusic extension.
When you receive a call, WM6 tries to open PocketMusic (or so) to play the ringtone, but can't because of compatibility reasons.
To have your ringtones back, you either uninstall your MP3 player, or unregister .mp3 extensions (to do that in PocketMusic, go in Menu -> Options -> file types and unselect .mp3).
Regards
Guitch
Fixing Ringtones
I had this problem and worked out how to fix it.
Look at the following Reg Key (change midifile to mp3file for mp3 issues)
Delete any EventSoundHandlers already in place and add this Key.
[HKEY_CLASSES_ROOT\midifile\Shellex\EventSoundHandlers\{245F94CF-DD9C-46F9-B4C8-D2B14A877893}]
@="XME EventSound Player"
Problem fixed.
David

Error: Problem with bluetooth hardware

I'm trying to connect my phone (ATT HTC Tilt) with a stereo bluetooth headset or trying to send files and everytime I scan for new devices it gives me an error stating "PROBLEM WITH BLUETOOTH HARDWARE"
Additionally, the "Turn on Bluetooth" option always turns off automatically....
What is going on? Can anyone help?
Please...
Anyone who experienced this or can give me a hand? Thanks!!
I had this same problem all of a a sudden on my Kaiser. But after doing a hard reset this got resolved.
And now i just flashed Dutty's 6.1 ROM. Its amazing update..
Cheers
Thanks Arun...
Tried the hard reset NO LUCK! Problem persists, and bluetooth keeps turning off. I go back to the wireless manager and check both boxes and they come back off in 30 seconds!!
When searching for devices it says (ERROR: PROBLEM WITH BLUETOOTH HARDWARE)
Not able to beam or receive files at all.
Any help? Thanks so much!!
Same Problem
Running into same problem here. I haven't even updated the ROM from stock yet, although I have done the JumpSPL step (cuz I received the white screen). My Radio is 1.27.14.09.
Any help is appreciated.
I would think that if you have done a hard reset and you don't install anything and you still have a problem then you **** is borked. time to do a warranty exchange.
has your bluetooth ever worked, with the rom that is currently on your phone?
Problem with Bluetooth Hardware!!!!
I am having the same problem. I have the stock AT&T ROM. Here is exactly what is happening:
The bluetooth is not working on my Tilt at all. It has lost connections with devices that it was already paired with (a Motorola Q Global and a headset). All attemps to pair the devices again lead to the following: "Error: Problem with Bluetooth Hardware".
When I go to Bluetooth Settings through the Comm Manager, then Mode and check "Turn on Bluetooth" and "Make this device visible to other devices", it unchecks as soon as I exit the settings menu. The Comm Manager constantly shows the bluetooth being off and when I tap the icon, the phone "thinks" for awhile and then it greys out again.
The only change that I have made from the time that it was working is to install the iphone package, and a today plugin (which I have since uninstalled) found here.
I recently changed my Kaiser Tweak bluetooth settings: I changed the BitPool from 'medium' to 'very high', but my headset was still working after that. The other settings are:
Sample Rate - 48000 (Advised)
Use Joint Stereo - Enabled (Default)
Receive Files - Enabled
Any ideas/suggestions?
Forced to do a hard reset
kcrumbley said:
I am having the same problem. I have the stock AT&T ROM. Here is exactly what is happening:
The bluetooth is not working on my Tilt at all. It has lost connections with devices that it was already paired with (a Motorola Q Global and a headset). All attemps to pair the devices again lead to the following: "Error: Problem with Bluetooth Hardware".
When I go to Bluetooth Settings through the Comm Manager, then Mode and check "Turn on Bluetooth" and "Make this device visible to other devices", it unchecks as soon as I exit the settings menu. The Comm Manager constantly shows the bluetooth being off and when I tap the icon, the phone "thinks" for awhile and then it greys out again.
The only change that I have made from the time that it was working is to install the iphone package, and a today plugin (which I have since uninstalled) found here.
I recently changed my Kaiser Tweak bluetooth settings: I changed the BitPool from 'medium' to 'very high', but my headset was still working after that. The other settings are:
Sample Rate - 48000 (Advised)
Use Joint Stereo - Enabled (Default)
Receive Files - Enabled
Any ideas/suggestions?
Click to expand...
Click to collapse
They only way to fix the problem was for me to do a hard reset.

Contact transfer to HandsFree - how to?

Hello,
I am using my Diamond (standard ROM 1.93.479.3 WWE) with my car BT hands-free set (Nokia CK-15W).
To use it effectively, it would be nice to download Diamond contacts into Nokia in order to have contact names displayed. Unfortunately I cannot do it in any way...
After pairing both devices I got the invitation to transfer contact but it ended with the transfer error. Then I tried to do it manually with the same result.
I tried re-pairing, resetting both Diamond and Nokia (back to factory settings) and many more combinations but I didn't succeed. I even tried to send contacts to my HF by beam.
The interesting thing is that usually 2-3 tries end with the transfer error and the next one doesn't end at all! I mean the animated transfer icon stays at the display for a long time (3 hours was the max I waited) but the transfer never completes.
Another thing is that after several re-pairings my Diamond is seen by Nokia with the Owner Name - but previously was seen with its ID! That's a little strange.
Can anyone help me with this?
Can it be something connected with BT profiles? Nokia has only hands-free profile... Just in case I turned on any feature that can be connected to file transfer like BT file sharing but still no effect.

Bluetooth phonebook issues (rSAP)

Have a bit of a strange issue with the galaxy S I9000 and also the I9100.
I always connect to my car using the rSAP bluetooth profile, the first time I connect to the car I enter the 16 digit code and set the device to trusted when a notification message pops up, a minute or so later I get a notification about a phonebook request, I accept this and I get the phonebook transferred to the car.
For the first 3 times of getting in and out of the car I get the phonebook, missed, dialled and received calls. Then after that it will not transfer the phonebook, I can tell it's failed as I go into the memory and look at the imported contacts and it's 0, usually I have about 190 contacts.
It will only transfer the phonebook if I reboot the phone, then I get another three transfers of the phonebook and then it fails again.
The car I have is an Audi A7 with MMI 3G+, but this was also the case with a Q7 with MMI 3G, both times I used rSAP mode for the call quality and SMS facilities.
I think it's something to do with the pBAP requests, but I'm not sure what.
I might check in HFP mode if the issue remains.

Categories

Resources