Help please - Tilt, TyTN II, MDA Vario III General

Have a Tytn II that I recently upgraded to 6.1 via the Orange ROM & it worked well.
Decided to install a HTC home plugin & since then it just starts & then switches off & starts again. Every now & again it pauses after starting but is totally unresponsive & then restarts.
I have trawled this site & tried soft, hard & every other reset but nothing helps. Before I chuck it through the window can you help??
Can't believe it is dead meat but please don't ask me to do anything involving menus as I cannot do that.
Can you help?

Reflash the ROM. Can you go into bootloader?

Cannot do anything other than watch it start & then restart!

Sivart said:
Cannot do anything other than watch it start & then restart!
Click to expand...
Click to collapse
OK, try this:
1. To go into bootloader (to flash a different ROM):
a. Press and hold camera button all the way and push stylus into reset hole until you see a tri-color screen​2. To hard-reset (restore ROM back to default settings/programs):
b. Press and hold two soft keys, one to the right of green send key and the other to the left of red end key, while pushing stylus into hole. You should see a white screen with blue text asking you if you want to delete all personal data. Press Send Key, wait for it to restore, then press send key again to reboot​
can you do either one of these?

bootloader
Thanks mbarvian
Now got tri-colour screen & the phone is not starting & restarting. In addition I have saved to my desktop the ROM I want to install.
Please excuse my lack of knowledge but what do I do now!!

Thank you
mbarvian
As soon as I asked you about what to do with my tri-colour screen & posted the question I remembered that it is governed by the computer. ROM now reloaded & phone is no longer a paperweight!!
Thank you very much & I am sorry for posting this thread twice. I thought (in my panic) I had lost the first post so did it again.
Again Cheers

Sivart said:
Thanks mbarvian
Now got tri-colour screen & the phone is not starting & restarting. In addition I have saved to my desktop the ROM I want to install.
Please excuse my lack of knowledge but what do I do now!!
Click to expand...
Click to collapse
You open the ROM and run the KaiserUpdatre Utility. And Go through those steps.
Flashing a ROM is covered extensively in the Kaiser FAQ Wiki, link in my signature. Browse through there and see if you can get answers to you questions and help Flashing if you need it.
Also, Give us a little more descriptive title next time. Will help people know what the question is most people pass over "Please Help" generic titles.

Jimmy McGee
I humbly apologise & will be more specific in the future.
Thankfully, my post was not overlooked by someone intent on helping me & my phone is restored to it's former glory.
Whilst I understand that these things are second nature to you can I ask that you cut some slack to people who are at their wits end & need help from experts as they think they have ruined their phone.
Sorry again & my titles will be better in the future - promise.

No worries. I'm not trying to belittle you, just trying to help you to best get the information you need so you can become as cool as me!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Help with start menu...so lost

Hello I recently bought a Htc tilt, and it came modified with dutty's dual touch, I decided to upgrade to Dutty's Official WM6.1 5.2.19400 Release today, everything went through fine with doing the upgrade, however, when I press the windows start menu and want to click on programs and scroll through the list the only way for me to view the programs is to go through file explorer, which is extremely annoying. I have tried to surf around and read on any way to fix this but have had no luck, if anyone can help me I would truly appreciate it. Actually I also can not use quickgps anymore.
Thanks
Idea
TC13 said:
Hello I recently bought a Htc tilt, and it came modified with dutty's dual touch, I decided to upgrade to Dutty's Official WM6.1 5.2.19400 Release today, everything went through fine with doing the upgrade, however, when I press the windows start menu and want to click on programs and scroll through the list the only way for me to view the programs is to go through file explorer, which is extremely annoying. I have tried to surf around and read on any way to fix this but have had no luck, if anyone can help me I would truly appreciate it. Actually I also can not use quickgps anymore.
Thanks
Click to expand...
Click to collapse
Flash back to the OEM ROM and start over.
Sorry but where do i get this OEM rom, and how will I know that it is the right one to flash with?
Thanks for the reply btw
All of your answers can be found here. http://forum.xda-developers.com/showthread.php?t=369282 click on shipped ROMs Wiki....
Thanks so much I really appreciate your help. One last question, after I revert back to the oem rom, will it relock my phone?
go back to OEM and then use Hard-Spl again , reflash new ROM again. (example: dutties, etc)
I have tried to use an oem rom, then flashed with Hardspl, and then flashed with new rom, and still no luck. I tried a few times, and still no luck. I am not sure what to do...
Thanks again for the help.
whoa......flashing a whole new rom just to fix this issue?
the reason you are browsing through your programs through a "file explorer" as you say, is because that's how wm works. if you dont want to do that, then get an application that adds a cascading start menu, like quickmenu or wisbar lite
I really appreciate the help, I really hope this will solve my issue. Just so that I can be clear does cascading start menu refer to when you press the windows key, scroll down to programs or my documents and basically a list pop's up and allows you to scroll through the list of whatever is in the the respective folder? I wish I knew how to explain this better. Again thanks to everyone for the help.
If you're trying to have a menu like Windows classic menu like so:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then you could use QuickMenu.

HELP URgent

i just update my xperia 1 software from 6.1 upgrade to 6.5, but now i stuck in a "align screen " this part is this how should i get rip of this?
legato231 said:
i just update my xperia 1 software from 6.1 upgrade to 6.5, but now i stuck in a "align screen " this part is this how should i get rip of this?
Click to expand...
Click to collapse
Try to hard reset your X1 as this:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen)
3. press power button, while still holding the others
Hope it will help
ted presley said:
Try to hard reset your X1 as this:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen)
3. press power button, while still holding the others
Hope it will help
Click to expand...
Click to collapse
me too
and if other rom specific issues arise, pls restrain them to the related rom thread to ensure best and quickest help for you and don't start opening new ones, thx
i had tried the solution but is useless.. is there other solution ? i had tried hard reset but still stuck in there
legato231 said:
i had tried the solution but is useless.. is there other solution ? i had tried hard reset but still stuck in there
Click to expand...
Click to collapse
take out your memory card
ask in the thread of the specific rom...
now the problem is solve but other problem occur my touch screen is totally is not function at all , OMG is it means i have to send my unit to the store?
legato231 said:
now the problem is solve but other problem occur my touch screen is totally is not function at all , OMG is it means i have to send my unit to the store?
Click to expand...
Click to collapse
Read the stickies! Read the thread of the ROM you are using and than complain!!!
Lokatho said:
Read the stickies! Read the thread of the ROM you are using and than complain!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[HELP] Home button not working after flashes...

So my uncle was flashing stuff into his phone (GT-i9100) as he does from time to time, and suddenly the back button stopped working.
He continued to flash things in order to fix it. He actually did it but as soon as the back button was fixed the home button "broke", apparently caused by something similar. I guess it's not a hardware problem.
He gave the phone to me in case I could come up with a solution.
I have already flashed all the stock stuff (2.3.5) with Odin, but the home button remains dead. Even in recovery mode and all that (I can't even put the device in download mode with the famous combination, I had to do it with ADB).
So the question is, is the home button recoverable? If it is, how?? If not, can someone explain to me how did it died??
Thanks a lot.
eXtremeDevil said:
So my uncle was flashing stuff into his phone (GT-i9100)
Click to expand...
Click to collapse
If your Model is i9100, you will get wrong answers in i9000 forum .
But, home button, would fail, when you flash wrong ROMS
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Maybe he got the wrong version like xsenman said ???
eXtremeDevil said:
So my uncle was flashing stuff into his phone (GT-i9100) as he does from time to time, and suddenly the back button stopped working.
He continued to flash things in order to fix it. He actually did it but as soon as the back button was fixed the home button "broke", apparently caused by something similar. I guess it's not a hardware problem.
He gave the phone to me in case I could come up with a solution.
I have already flashed all the stock stuff (2.3.5) with Odin, but the home button remains dead. Even in recovery mode and all that (I can't even put the device in download mode with the famous combination, I had to do it with ADB).
So the question is, is the home button recoverable? If it is, how?? If not, can someone explain to me how did it died??
Thanks a lot.
Click to expand...
Click to collapse
I confused the forum. Sorry. Can an admin move it to the 9100 forum? Thanks.

Little brother messed up his phone... and I'm too dumb to fix.

Hello new friends.
My little brother and his inventive mind were messing around with his phone and this started to show up:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(btw, I tried what it says on the screen.. did nothing.. also trying to flash a new rom did nothing)
I know little about Motorola phones and rooting in general... all i can do is "root" samsung with silly Odin software (easymode right?)
I gave the phone to a friend and after some examination he said that somehow my little brother managed to "delete and/or corrupt" the phones main partition. whatever that means... He was unable to do a hard reset because at some point the phone said there was a problem with one of the partitions.
Now.. while I dont know much about android and motorola, im great following directions.
is there a humanly possible way to fix this?
I can get to this menu below, but everything I touch goes back to bootloader message:
Additional info with numbers mumblejumble:
Thanks in advance,
Dan.
Try this: forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
dangadelha said:
Hello new friends.
My little brother and his inventive mind were messing around with his phone and this started to show up:
(btw, I tried what it says on the screen.. did nothing.. also trying to flash a new rom did nothing)
I know little about Motorola phones and rooting in general... all i can do is "root" samsung with silly Odin software (easymode right?)
I gave the phone to a friend and after some examination he said that somehow my little brother managed to "delete and/or corrupt" the phones main partition. whatever that means... He was unable to do a hard reset because at some point the phone said there was a problem with one of the partitions.
Now.. while I dont know much about android and motorola, im great following directions.
is there a humanly possible way to fix this?
I can get to this menu below, but everything I touch goes back to bootloader message:
Additional info with numbers mumblejumble:
Thanks in advance,
Dan.
Click to expand...
Click to collapse
as I understand it this is only the bootloader unlocked, the phone works regularly only that at the time the alert you. There are two ways to avoid this annoying message:
1 relock the bootloader
2 use an alternative screen that hides the annoying warning.
before re-locking take a deep DELETE and uses a script to reload a ROM from scratch
Find it all on xda !!!! look!

Question Zenfon 8 and a newbie

I unlocked my new Zenfone8. then I had flashed the new E-OS system. and somehow I put it in my pocket wrong, and now the phone doesn't tell me it's unlocked! and it only goes to the green START screen Can someone help me?
How can I unlock the bootloader again? I would love to be able to bring it back to its original state!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So.. you got a NEW Zenfone 8. Decided to unlock right away, then flash E-OS (never heard of this before), and even put in your pocket wrong. And now you want to unlock it again? And let us not forget you're a newbie.
I'm not trolling but next time always read how to revert back or somekind of backup plan when you do some flashing. You didn't even mentioned any way you tried to get it working again.
Guys pls help this poor guy.
ronzky321 said:
So.. you got a NEW Zenfone 8. Decided to unlock right away, then flash E-OS (never heard of this before), and even put in your pocket wrong. And now you want to unlock it again? And let us not forget you're a newbie.
I'm not trolling but next time always read how to revert back or somekind of backup plan when you do some flashing. You didn't even mentioned any way you tried to get it working again.
Guys pls help this poor guy.
Click to expand...
Click to collapse
hello.
this e/OS (https://doc.e.foundation/devices) is a siple system but fairly new.
yes, that would have been smart with the backup... So with adb I can't get into the cell phone, I can connect with fastboot. this E/OS only runs when the phone is unlocked.. I previously unlocked it with the original tool from Asus (unlock.apk) But if the cell phone is lying on its side in the suitcase and accidentally presses all 3 buttons at the same time, the cell phone will be locked again! I didn't know that... and can you unlock this phone with fastboot? or with programs completely flash on original? Best Regards!
Hi, I can suggest you try the instructions in this post, the install of /e/OS most likely failed and now it doesnt get past the bootloader. The device is probably fine. https://forum.xda-developers.com/t/full-recover-to-stock-if-things-went-really-bad.4337467/
worked!
but important! You first have to deactivate the digital driver signature in Windows 10!! otherwise driver fragments will be missing when flashing!!
Had to flash twice, and the procedure worked!
many thanks to everyone!
PS: what tool do you use for your backups?
lulu1975 said:
worked!
but important! You first have to deactivate the digital driver signature in Windows 10!! otherwise driver fragments will be missing when flashing!!
Had to flash twice, and the procedure worked!
many thanks to everyone!
PS: what tool do you use for your backups?
Click to expand...
Click to collapse
I personally do not store anything really important on my phone, so no backups apart from Google photos and manually uploading my important files.

Categories

Resources