Since weeks i am trying to figure out if more people have the same problem as i do but so far no result; i can't switch of my kaiser when iGO8 navngo is running. I have to exit the app to be able to put my phone into standby. If i try this when the app is running the screen starts to flash on & off, making the app unusable.
Even when i minimize the app and see the today screen, i can NOT switch the device off.
I have tried several roms ranging from 6.0 to 6.1 stock & cooked ones, and several versions of iGo, all to no avail.
Does anyone else have this issue and if not, what can i do to solve it? its quite annoying because when im on route i want to be able to switch off my device and stick it in my pocket when i leave the car..otherwise its a pretty cool program!
thanks in advance
I installed igo8 yesterday...when I found out that i couldn't run my igo 2006 maps, I uninstalled it without messing with it too much. That and I dont like to leave things like that running. Drains the battery too much for my taste.
Now, if anyone happenes to have US maps (Florida, not to put too fine of a point on it) for igo8....that would be WONDERFUL. Feel free to PM me
anyone....?
For me this works, no problem.
I minimize the app. and can lock my Kaiser and switch of the screen.
Have you tried to change the settings in IGO8 : Device settings-> power management -> use device settings ?
Daan
Ok, let me put it this way without giving out to much. Do you have the purchased copy from iGO or another source? If it's the other source (i know what you're talking about ) there's something wrong with the..uhh, let's just say with the exe.
daan4suz said:
For me this works, no problem.
I minimize the app. and can lock my Kaiser and switch of the screen.
Have you tried to change the settings in IGO8 : Device settings-> power management -> use device settings ?
Daan
Click to expand...
Click to collapse
Tried that, doesnt help.
Can you also switch off while in the app? (besides running it minimized)
The same happens to me with another navigation software that does not allow device to sleep when GPS is turned on. With previous device (HTC Trinity) everyting workied fine, but with Kaiser I am getting blinking screen and unresponsive interface when I try to switch off device in this mode. No matter is it active or minimized.
ROM: ROMeOS 4.1
plaktoets said:
Tried that, doesnt help.
Can you also switch off while in the app? (besides running it minimized)
Click to expand...
Click to collapse
Will try, however in the middle of flashing a new rom So can't really try right now.
Maybe I can give some feedback later today.
D
Are you also using S2U2? If so, be sure to add iGO8.exe to the exception list in the registry. This will stop S2U2 from suspending power to iGO8 when going into standby.
tomcattjs said:
Are you also using S2U2? If so, be sure to add iGO8.exe to the exception list in the registry. This will stop S2U2 from suspending power to iGO8 when going into standby.
Click to expand...
Click to collapse
not using s2u2
same problem
is there some1 who can solve it?
dslpwr said:
same problem
is there some1 who can solve it?
Click to expand...
Click to collapse
im trying to find a fix for weeks but sofar nobody is able to reproduce this (in other words nobody seems to have this problem)..you're the first..
does your screen also start to blink when you press the button?
plaktoets said:
im trying to find a fix for weeks but sofar nobody is able to reproduce this (in other words nobody seems to have this problem)..you're the first..
does your screen also start to blink when you press the button?
Click to expand...
Click to collapse
true
trying different versions of IGO - same result
its the same with tom tom its windows telling you a nav program is open and to close it.i found this out the hard way.now all i do is close the program and sorted
o2xdaexec said:
its the same with tom tom its windows telling you a nav program is open and to close it.i found this out the hard way.now all i do is close the program and sorted
Click to expand...
Click to collapse
Its true that tomtom6 had this problem - but the version that comes on the cd doesn't. Obviously that one's optimized for the kaiser. Also tomtom7 which comes from a diamond works ok.
good news!!!
find a solution by installing new 8.0.0.49545 version
just di it
dslpwr said:
good news!!!
find a solution by installing new 8.0.0.49545 version
just di it
Click to expand...
Click to collapse
yes, i noticed the same. But it's not 100% ; the screen blinks back on before shutting down once. Not a big deal. However when minimizing igo and switching the device off, the screen goes back on and igo maxmizes automatically.
Do you experience the same thing?
But at least its much better now
hm, also sometimes it crashes after resuming from standby, and the today shortcut is gone....
doesnt seem to be very stable
Related
Hi to all,
excuse me if I open a discussion allready post but I tried with the search function and I din't found anythings about my proble.
The last week I tried to log the GPS to geotag same photos that I was shooting.
I used VisualGPSce and all was fine untill I switched off the screen to save battery, it lost the signal till I reactivate the screen, I had the same problem with other GPS utils to log.
I'm pretty sure that before the GSP was logged with the screen off to.
I updated the radio rom, my configuration is.
[Radio ROM]1.56.70.11
udK 6.1 R1 Lizard WM6 OS 5.2.1933 Build 18533.0.7.0)
Any idea ?
Thanks in advance and sorry for my english.
Carlo.
cybor said:
Hi to all,
excuse me if I open a discussion already post but I tried with the search function and I din't found anythings about my problem.
The last week I tried to log the GPS to geotag same photos that I was shooting.
I used VisualGPSce and all was fine until I switched off the screen to save battery, it lost the signal till I reactivate the screen, I had the same problem with other GPS utils to log.
I'm pretty sure that before the GSP was logged with the screen off to.
I updated the radio rom, my configuration is.
[Radio ROM]1.56.70.11
udK 6.1 R1 Lizard WM6 OS 5.2.1933 Build 18533.0.7.0)
Any idea ?
Thanks in advance and sorry for my english.
Carlo.
Click to expand...
Click to collapse
I have yet to find a solution for your GPS problems in TomTom.
This is what I do to save battery power in TomTom.
1. Turn on the safety feature (example, above 70 kph. It displays a static screen that uses much less battery power than the live moving maps do.
2. Turn down the back light.
3. Plug it into the 12v when in a vehicle.
I use NoniGPS and it is possible to have this app running in the background and switch off the screen to save battery life with a little app called Screen Switch. This app will not work with TomTom.
Hi, thanks for the answer.
I don't have the problem with TomTom but I need to screen off while logging GPS, so you solution could be ok for me, I'll try it.
Carlo
cybor said:
Hi, thanks for the answer.
I don't have the problem with TomTom but I need to screen off while logging GPS, so you solution could be ok for me, I'll try it.
Carlo
Click to expand...
Click to collapse
if you switch off your screen by using the button, it will suspense whatever you are running apart from GSM or mobile... The only thing you can do is brighness
vnt said:
if you switch off your screen by using the button, it will suspense whatever you are running apart from GSM or mobile... The only thing you can do is brighness
Click to expand...
Click to collapse
I don't switch off the PDA but only the screen, like when you can switch off the screen listeng a song and the player don't stop.
cybor said:
Hi to all,
excuse me if I open a discussion allready post but I tried with the search function and I din't found anythings.....
Click to expand...
Click to collapse
have a look at PsShutXP. You can turn the screen of with this, there are a few other options as well. Its a free program, and is skinable too!
http://ppcsoft.narod.ru/english/
off
in tomtom, there is a feature that you can turn off the screen.... it will dim followed by the PDA settings
Thanks to all for the hel and the answers, I tried some ways and some softwares that you suggest me and I discover that the problem is present only when I shut down the screen using the shortcut AE Button Plus, using then same function in HomeScreen PlusPlus UI the GPS don't stop to work.
Thanks again.
Ciao.
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
Click to expand...
Click to collapse
Mine locks up when Gyrator2 tries to rotate the screen on incoming calls. Really annoying. I want to be able to rotate my screen in most programs, but it always seems to screw up my incoming calls and creates more lag...I'm gonna try to go back to sensorlock instead of pocketshield...
I will try to post it to the official forum as well.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
i get odd issues as well
I agree, I get odd issues as well. I get the occassional hang, crash, missing bar etc. I uninstall pocketshield and I don't get issues. I'm using NATF 2.3 rom. I paid for it and it worked ok for a while until I noticed these intermittent problems...
wmserver said:
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
Click to expand...
Click to collapse
I created a rule in Gyrator almost immediately after installing PS - I didn't want it to rotate the PS screen.
I left it up to Gyrator to get the window name and now my rule is set for the window #NETCF_AGL_BASE_.
But my problem is not in rotating, my problem is in unlocking (at least I think so). Anyway, will try to change the window name to PShield and see if it makes any difference.
EDIT
Nope it didn't. The top bar disappeared again during the first seconds of my testing :-(
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
An updated version has now been released (9th Dec) to fix this problem...
rmjjjt said:
An updated version has now been released (9th Dec) to fix this problem...
Click to expand...
Click to collapse
Thank you my friend for letting me know. If this is indeed fixed I don't mind paying the $13. Will check it right now.
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Im using PocketShield, but I was wondering - the phone always locks after I insert the stylus (I have Touch HD), after a while PocketShield kicks in and after that if I want to unlock the device, I first have to unlock the "normal" lock and then the PocketShield. Really annying.
Is there a way to disable the lock after stylus insertion?
chetlet said:
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Click to expand...
Click to collapse
actually i just experience this an hour ago.. also every time I slide the keyboard to unlock my Fuze the screen freezes on the landscape mode. all keys on the keyboard besides the windows key. I hope they fix these bugs right away..
I have the same problem with the top bar disappearing. I'm not running Gyrator or anything like that. I'll try a new version when the bugs mentioned have been ironed out. It is a great product though. I do like it.
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
cheez said:
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
Click to expand...
Click to collapse
yes many people posted on the pocketshield forums with same issues...
i dont know if anyone else is having this issue... but
i seems that when slide to answer is activated PSPP some calls get answered automatically... and it takes me to the "talking" screen immediately.
any help on this issue would be super!
I'm having other issues with PocketShield. I didn't have this same problem with version 2.0.6.3, but with version 2.1 I started to have problems with my alarm notification. When the alarm goes off, it just quickly vibrates once and just stops if it's in a locked state. Also, I noticed a heavy battery drain issue--the battery charge would drop about 10% each hour. Once I uninstalled it, the problems with the alarm and battery drain stopped.
Even with the new version (2.1.0.1) I still have problems answering phone calls. I'll slide to answer and the phone just keeps ringing. I hit the "Send" key and nothing happens. I hit the "Answer" soft key and still nothing....
Anyone else still see these problems?
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Major Problems
Well I was gonna pay for it but their payment server seems to be phishing site. Also it crashed SQB and when I uninstalled it, the program removed my outlook email account. Sorry but looks like malicious program so going back to an old sensor lock. I did like the software interface but Paypal confirmed me, so I shouldn't need to give you my personal information to pay for the software. No shipping means I am not giving you my phone number and address, etc. Sorry too many questionable things going on for a screen lock... rule is KISS and since this programmer isn't doing that then dump it off my device is my rule.
Neo_ said:
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Click to expand...
Click to collapse
version 2.1.0.4 is out and is supposed to fix that problem..
I ran the site and its fine why do you say its a phishing site?
Hello to all of you!
Happy new year first of all!
Since a few days i'm using the Built in lock from WM and the Phone Canvas posted here on the Diamond Thread. Previously I've used TouchLockPro, but somehow it didn't work properly for me...
Right now I have a problem with it, I've configured with Advanced Config Tool form Schaps a timeout to lock my device automatically so when I don't touch my device 30 sec or press the power button, It will lock...
But....also in a call or something, which is very annoying because to end the call I have to unlock first AND my phoneskin is gone as well.....
So summarised:
Does anybody know how to automatically lock my phone like it should do, except while in a call??
Thanks in advance!
Kind regards
Jeroen
p.s. mods, if this item has already been discussed, can you please erase this Thread then??
Pietje_1985 said:
So summarised:
Does anybody know how to automatically lock my phone like it should do, exept while in a call??
Click to expand...
Click to collapse
I dont use the built in lock from windows anymore (i used to have your problem). Instead i now use S2U2 (Scroll 2 Unlock) and this doesnt lock during a call. One of the best apps i have on the phone - and its freeware!
kaos_king said:
I dont use the built in lock from windows anymore (i used to have your problem). Instead i now use S2U2 (Scroll 2 Unlock) and this doesnt lock during a call. One of the best apps i have on the phone - and its freeware!
Click to expand...
Click to collapse
Thanks for your reply kaos_king
I'd rather stick to the standard lock app from WM, because S2U2 is quite big app to load into memory and for me it drains my battery quicker...(at least, that's my opinion)
Thanks anyway...I hope somebody else knows how to solve this.....
Pietje_1985 said:
Thanks for your reply kaos_king
I'd rather stick to the standard lock app from WM, because S2U2 is quite big app to load into memory and for me it drains my battery quicker...(at least, that's my opinion)
Thanks anyway...I hope somebody else knows how to solve this.....
Click to expand...
Click to collapse
Yeah it used to be very annoying when i had to unlock it to put on loudspeaker! lol
Im just putting up with the **** battery for now
Hope u get it sorted mate
kaos_king said:
Yeah it used to be very annoying when i had to unlock it to put on loudspeaker! lol
Im just putting up with the **** battery for now
Hope u get it sorted mate
Click to expand...
Click to collapse
Hehe...thanks for your advice mate....gonna be allright
Untill then I manually have to lock/unlock
Isn't there somebody who could help me??
Pietje_1985 said:
Since a few days i'm using the Built in lock from WM and the Phone Canvas posted here on the Diamond Thread. Previously I've used TouchLockPro, but somehow it didn't work properly for me...
Right now I have a problem with it, I've configured with Advanced Config Tool form Schaps a timeout to lock my device automatically so when I don't touch my device 30 sec or press the power button, It will lock...
But....also in a call or something, which is very annoying because to end the call I have to unlock first AND my phoneskin is gone as well.....
Click to expand...
Click to collapse
Hello,
Please can you clarify your problems? Does the phone always lock itself in a call? What do you mean your phone skin is gone? When did it go?
Davey101 said:
Hello,
Please can you clarify your problems? Does the phone always lock itself in a call? What do you mean your phone skin is gone? When did it go?
Click to expand...
Click to collapse
Hi Dave!
Well the problem is actually caused by ACT 3.2 from Schaps I think.....I've configured the keylock from Windows Mobile to lock itself automatically after a period of inactivity OR when I press the powerbutton to suspend the the device, and after that my phone is locked! But even WITHIN a call, my device will become locked with the specified timeout and will make my phoneskin dissapear and let it go back to the homescreen!
If I want to hang up then, I have to UNLOCK my device and then TAP on the phone icon which appears next to my Signal strength Icon....THAN the phoneskin will reappear and THEN I can hang up the call.....
Hope you'll know by now what I mean...
It's driving me crazy, because I really fancy the automatic lock........
Thanxx anyway
Jeroen
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
untrueparadox said:
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
Click to expand...
Click to collapse
Allright Thank you!
I will give it a try...I'll let you know if it's working
untrueparadox said:
in the advanced config thing or diamond tweak theres an option for lock with "light sensor while in call" or something like that. disable it. and ur set. its annoying as hell, i accidentally played with that feature and it annoyed the crap outta me until i finally found what it was.
in diamond tweak, it should be in the first section of the thing, u dont need to even scroll. i forgot about advanced config cause i dont use it.
edit: option is called "light sensor" but the description talks about it for use during phone calls.
Click to expand...
Click to collapse
Pietje_1985 said:
Allright Thank you!
I will give it a try...I'll let you know if it's working
Click to expand...
Click to collapse
Nope problem is not solved yet...my phone still keeps locking..
Pietje_1985 said:
Well the problem is actually caused by ACT 3.2 from Schaps I think.....I've configured the keylock from Windows Mobile to lock itself automatically after a period of inactivity OR when I press the powerbutton to suspend the the device, and after that my phone is locked! But even WITHIN a call, my device will become locked with the specified timeout and will make my phoneskin dissapear and let it go back to the homescreen!
If I want to hang up then, I have to UNLOCK my device and then TAP on the phone icon which appears next to my Signal strength Icon....THAN the phoneskin will reappear and THEN I can hang up the call.....
Click to expand...
Click to collapse
Hi Jeroen,
The problem is not caused by Schaps ACT because that just enables and disables WM features by changing the normal registry entries used by WM.
The problem is some combination of your ROM and your dialer skin not playing nicely with the auto-lock feature. Try removing the dialer skin to see if that helps. If it does help then there may be another, similar phone skin you can use instead.
Ok, I've done a bit more investigation into this issue. I don't use auto-lock normally so I've tried it out. I can confirm it locks during my calls too.
You have a least a couple of options -
1) Don't use auto-lock. You could lock the phone with the left soft key like I do.
2) Don't switch off the screen during a call. There are two settings in Schaps ACT to prevent the screen shutting of automatically and this version of the phone skin has the in-call locking curtain:
http://forum.xda-developers.com/showthread.php?t=466519
Davey101 said:
Ok, I've done a bit more investigation into this issue. I don't use auto-lock normally so I've tried it out. I can confirm it locks during my calls too.
You have a least a couple of options -
1) Don't use auto-lock. You could lock the phone with the left soft key like I do.
2) Don't switch off the screen during a call. There are two settings in Schaps ACT to prevent the screen shutting of automatically and this version of the phone skin has the in-call locking curtain:
http://forum.xda-developers.com/showthread.php?t=466519
Click to expand...
Click to collapse
Hi Davey101
Thanks for your help in advance! I really appreciate it
I do use the Nosleep!.cab file to prevent my screen from going off during a call, so that would not be the cause....I think I just have to turn off the phoneskin, OR do it manually
Off course...I rather prefer to leave the auto-lock function active, but if it's not gonna work, I have to face it
Cheers mate!
Jeroen
Hi @all,
i hope you can help me with my issue.
I searched very long here and at google, but i didn't find any solution for this.
My xperia is set to "turn off unit after 1 Min", and no dimming light.
Now it is so, that in 49 of 50 cases is works probably, but in 1 case, te display doesn't turn off.
Backlight runs and runs and runs, till i turn unit off manually.
When problem starts, only a softresets helps to turn it back to normal
proberties.
I didn't install any Tf3D, oder any other profil programm.
Can someone help me please?
ps, sorry for my bad english, once i was very good, but i didn't speak it very long time.
Thanks
HobGoblin2006 said:
Hi @all,
i hope you can help me with my issue.
I searched very long here and at google, but i didn't find any solution for this.
My xperia is set to "turn off unit after 1 Min", and no dimming light.
Now it is so, that in 49 of 50 cases is works probably, but in 1 case, te display doesn't turn off.
Backlight runs and runs and runs, till i turn unit off manually.
When problem starts, only a softresets helps to turn it back to normal
proberties.
I didn't install any Tf3D, oder any other profil programm.
Can someone help me please?
ps, sorry for my bad english, once i was very good, but i didn't speak it very long time.
Thanks
Click to expand...
Click to collapse
Are there any programs which is running? any cables which are connected while it happens?
No, sometimes it happens while phoning (then it dimms, but it doesn't turn off), then sometimes after looking for Messages, then sometimes after syncing. I can't repeat this issue. I even don't know why it happens ?
Is there something i can look in the registry?
Only thin i installed is
Calender+,
Task+,
SPB Insight,
Clifford Xperia Tweak (only thin is i switched off the Threaded SMS Look),
SPB Wallet,
Sprite backup
The Rest i run from SD Card, which was pre-installed from my old unit (Kaiser).
I put it out from Kaiser, then put in in Xperia, then i rebuild the links to programm folder.
so i saved the install Progress.
HobGoblin2006 said:
No, sometimes it happens while phoning (then it dimms, but it doesn't turn off), then sometimes after looking for Messages, then sometimes after syncing. I can't repeat this issue. I even don't know why it happens ?
Is there something i can look in the registry?
Only thin i installed is
Calender+,
Task+,
SPB Insight,
Clifford Xperia Tweak (only thin is i switched off the Threaded SMS Look),
SPB Wallet,
Sprite backup
The Rest i run from SD Card, which was pre-installed from my old unit (Kaiser).
I put it out from Kaiser, then put in in Xperia, then i rebuild the links to programm folder.
so i saved the install Progress.
Click to expand...
Click to collapse
You said while phoning the light dims but it doesn't turn off. perhaps 1 of your config is set to "do not turn off screen while phoning"
You mean in Xperia Tweaks?
Sorry, no it isn't set so. I wonder because i used google and searched in all languages, and no one ever had this problem ?
Is tere any Key in registry what helps you to see, what can be the problem?
I had have this problem only when i tried an new Program like SPB Shell or something like this. Some programs are disabling the option for automatic turn off in the energy management. reenabling it fixed it evertime.
Another strange issue with my X1: every night an midnight it turns on - and after 1 minute (0:01 o'clock) it turns off. oO
But i have not installed SPB Shell, other Programms that do this?
mcfisch said:
I had have this problem only when i tried an new Program like SPB Shell or something like this. Some programs are disabling the option for automatic turn off in the energy management. reenabling it fixed it evertime.
Another strange issue with my X1: every night an midnight it turns on - and after 1 minute (0:01 o'clock) it turns off. oO
Click to expand...
Click to collapse
I had the same problem as well with the same program, but every thing returned back to normal once I removed that program. Thanks for the hint mcfish
Hi all... I basically have two problems. First of all, I got the Z3C happily rooted... The problems are:
1- Tap2wake simply doesn't work, regardless of how I tap... fast, slow, super fast, thumb, index finger, etc... enable it/ disable it... same issue... refuses to work.
2- I use exDialer for my dialer... It works great (I've been using it for a couple of years)... the problem arises when I miss or reject a call. When this happens, Sony'x Phone apk (forgot the exact name) crashes. I have to acknowledge the notification of the crash and everything continues to work... strange ha?
Any ideas what can be going on? Thanks!
Carlos
Did you uninstall Xperia Home? That will cause the phone app to crash on calls as you describe.
I assume you have the option for tap to wake checked? Possibly you uninstalled something that it needs? Never ran into that particular issue.
Can't comment on issue #2, but T2W works flawless for me in 99.9% of the cases (with firmware .98).
Did you (now it might be too late) check whether both problems were there before you unlocked the BL?
What firmware version are you using?
Thanks.. Yeap. too late... already rooted...
Regarding #1, still doesn't work. Even after unfreezing Xperia home, which indeed fixes #2...
Thanks!!!
Carlos
so I've frozen some apps on the z3c, but I can't quite figure out which one controls the tap2wake function. I've tried the trial and error way (freeze/unfreeze), but can't narrow it down. Any of you have any ideas which apk controls that?
Thanks again!!
Carlos
Chaleman said:
so I've frozen some apps on the z3c, but I can't quite figure out which one controls the tap2wake function. I've tried the trial and error way (freeze/unfreeze), but can't narrow it down. Any of you have any ideas which apk controls that?
Thanks again!!
Carlos
Click to expand...
Click to collapse
You can just turn it off in Display settings.
Kev1000000 said:
You can just turn it off in Display settings.
Click to expand...
Click to collapse
Thanks Kev. What I ment to say is that I want to be able to ENABLE it... I have it ticked on, but since I froze some APKs, it's not working. I wish to know if anyone knows which one is it to unfreeze it (if that's the case). I've tried but I havent been able to figure it out.
Best regards,
Carlos