Hi
I was wondering if the diamond has a video out from the USB connector and if anyone knew if it was comaptable with these viewing glasses. I contacted the manufacturer a couple of times but have not received a response
Many Thanks for any help supplied
Related
Hey everyone, been a lurker here for a while and made great use of the forums for about the last six months. Sadly, my tilt is experiencing the faded white screen associated with the main ribbon cable connecting the two halves of the phone together going bad. At this point, I'm not feeling motivated enough to actually replace the cable and get everything running, so I figured I'd see if anyone here were interested in it for parts, to repair, for experimentation or whatever. Phone functions perfectly except for the issue with the screen and cosmetically it is in great shape. I actually am still using it at the moment until I decide what to replace it with. If you're interested or have any questions, email me at [email protected]
Thanks
Mike
AT$T Tilt with bad LCD ribbon cable
I have two tilts with bad ribbon cables causing the white screen. Does anyone knwos where to buy replacement ribbon cables for the LCD screen?
Hey all.. I ahve a tilt with the same Problem... And you might want to contact use Planetneo ... He tells me he owns a phone shop, and is willing to not only supply the ribbion, but do the repair himself for either $60 or $70.. I would contact him directly though to see if he is willing to do that for you as well.. I have not shipped off my defective phone yet, as I am poor at the moment.. but it sounds like a good deal.. Of course with any transaction, do so at your own risk and such... Just thought I would offer a option...
I have noticed that there is a bit of play with the mini-USB socket, not the whole thing just the 5-pin bit in the middle. If I touch the connector with the stylus or a pen it there is a small amount of movement up and down. Is this normal or is it on it's way out?
I only noticed this recently and it may have been like this from new, however I don't another Kaiser as a reference. I would be grateful if someone would have a look and a poke at their Kaiser to see if its the same?
Thanks
Andy
ADB100 said:
I have noticed that there is a bit of play with the mini-USB socket, not the whole thing just the 5-pin bit in the middle. If I touch the connector with the stylus or a pen it there is a small amount of movement up and down. Is this normal or is it on it's way out?
I only noticed this recently and it may have been like this from new, however I don't another Kaiser as a reference. I would be grateful if someone would have a look and a poke at their Kaiser to see if its the same?
Thanks
Andy
Click to expand...
Click to collapse
Haven't had a problem with my Kaiser, but had to have Tilt exchanged for
bad USB Port. There have been other reports of this.
tkalli said:
Haven't had a problem with my Kaiser, but had to have Tilt exchanged for
bad USB Port. There have been other reports of this.
Click to expand...
Click to collapse
Thanks for the reply but it didn't really help. Can you have a look at your Kaiser and see if there is any play in your mini-USB socket? Or are you saying yours is solid?
Cheers
Andy
ADB100 said:
Thanks for the reply but it didn't really help. Can you have a look at your Kaiser and see if there is any play in your mini-USB socket? Or are you saying yours is solid?
Cheers
Andy
Click to expand...
Click to collapse
Mine is pretty solid. No movement that I can see.
ADB100 said:
Thanks for the reply but it didn't really help. Can you have a look at your Kaiser and see if there is any play in your mini-USB socket? Or are you saying yours is solid?
Cheers
Andy
Click to expand...
Click to collapse
My replacement Tilt that I got just over 1 month ago has a semi-loose USB port. There is play with the cable when it's connected, but my connection to the PC has never been affected by it.
Thanks for the replies so far. I would be grateful if a few others would test this out for me with their Kaisers and report back here. It is a very small amount of movement, however it worries me a bit ....
Andy
if i were you i will better take it to be checked. i am worried that by time dust, humidity, dirts might accumulate inside (if its loose then it means that a gap exists)
I got my third Kaiser last week for USB issues. Even on my 8525 this was a problem. I'm on AT&T and I pay $50 for a replacement device with insurance, starting November 1st they are going up to $125 so i've gotten both mine and my girlfriend's replaced. Wiggly USB usually means upcomming death.
Hi there,
I purchased a Capdase Alumor cover for my HD2 at MobiMega. Now, not even two weeks after having received it from China, the silicon already loosens itself from the aluminium at several places. I don't know why, because I do not do anything unusual with it. I put it in my bag and take it out - that's it.
So I filled out the contact form at MobiMega and told them my problem, asking for a solution to my problem. But instead of trying to help me, they just ignore my message, not answering nothing.
So if you are thinking about purchasing one of these at MobiMega, take this information into consideration.
Greets
poor you. it could be counterfeit.
i have this case and used it for a month before i got otterbox defender. my usage can be consider quite "abusive" but i didn't get it to loose shape or anything.
I have had different experience with MobiMega.
Excellent products and awesome customer service, prompt email replies..
I am sorry to hear nobody answered you, maybe check your junk box ? send again ? But what are they gonna do.. What you describe isn't any seller's fault.
Maybe email capdase ?
I hate saying this but the case I got from them was fine. Only thing weird was that it was packaged like it was from a resident.
Other than that it's an awesome case with no peeling.
i have this case too and no problems with quality or something. but i don't buy it from MM...
I've heard that a few people have had issues with the charging port coming out completely, how wide spread is this on the z3c?
I have a New Magnector X2 charging adapter and ive tried it once, but then heard about these issues so have decided to hold off.
DrEzkimo said:
I've heard that a few people have had issues with the charging port coming out completely, how wide spread is this on the z3c?
I have a New Magnector X2 charging adapter and ive tried it once, but then heard about these issues so have decided to hold off.
Click to expand...
Click to collapse
I have the same x2 mag fine here no problems just be gentle.
I was using both the adapter and the cable from magnector and my Z3C is currently at the sony repair center b/c the port not only became loose but then came out
Wow really? I am planning to buy one of those magnector charger as well before i stumbled upon this. Can anyone provide pictures of the port coming loose? I tried messing with mine gently and it seems... well strong enough but i haven't use it yet.
solidghost9 said:
Wow really? I am planning to buy one of those magnector charger as well before i stumbled upon this. Can anyone provide pictures of the port coming loose? I tried messing with mine gently and it seems... well strong enough but i haven't use it yet.
Click to expand...
Click to collapse
Yeah I would also love feedback on this. I was looking at the Sony Dock or the Magnector X2 thingy for my teenage sons new Z3C, as we thought the constant opening and closing of the charging port would eventually weaken.
Also hearing horror stories of Sony not covering this damage under warranty?
https://talk.sonymobile.com/t5/Xper...3-Magnetic-Charging-Port-CAME-OFF/td-p/913517
yeah and ive read sony are being dicks about repairing and charging people a fortune...
I need them flaps! At my job a lot of dirt and stuff will get in the ports...
I haven't found anything online. Hope someone else has?
swimon said:
I need them flaps! At my job a lot of dirt and stuff will get in the ports...
I haven't found anything online. Hope someone else has?
Click to expand...
Click to collapse
Hi,
Search On AliExpress.
I Ordered This And Its Good.
https://www.aliexpress.com/store/pr...590.html?spm=2114.12010608.0.0.116e67cdHxS58z
thanks
You can also buy magnetic USB cable, there are many of them on AliExpress. I bought one for my dad because he always tries to connect the charger while driving and with this cable it's just 1 second task plus the port doesn't get dirty and won't get loose.
I ended up using the 3d printer at work to print myself some dust covers
Forcell Armor has the requested features
https://m.youtube.com/watch?v=iIP3YO53c_0