WM6 stuck in password mode - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Installed WM6.1 CEOS 20262.Build 19949 Aku1.2 on to my pda2k.
Was wrapped with results, was able to use my supertooth handsfree again etc until today.
Went to use it today and it was stuck in the password screen. It would not accept the password I had set earlier and will not accept a hard reset.
Any Suggestions
Regards Craig

Looks like i found it.
http://http://forum.xda-developers.com/showthread.php?t=404781
Thanks for looking anyway.
Regards Craig

Stuck in password mode
I have the same problem with mine. The link that you pasted is not working, how do i resolve this problem.

Do a hard reset - stylus Reset and power button
Before the rom info comes up at the bottom of the screen press camera and record together.
This will come up with the boot selections at top of screen
Use the camera button to scroll and the record button to change set the options from top to bottom
No
Yes
Yes
then press the email button to accept.
Let WM 6 load.
Calibrate screen.
skip the password and email selections
Wait for everything to finish setting up
Then go into settings and set password from the key option.
Hope this helps

Changed over to Rom
ROM WM6.1 CE OS 5.2.20226 (Build 20226.1.3.0 PV DVH)
Which I found better suited my needs and am back to the same password problem again. Seems not to like being connected to the computer.
As soon as I cradle it the computer asks me to unlock and back to incorrect password.
Something must be overwriting the password entry.

hey mate i had this exact same problem, to get it to connect with the oc when it is passworded do this
press and hold the power button then while still pressing the power button press and hold the top left side button, then while still holding these in poke the reset hole. it will go into serial mode. now dock it with the pc and flash a wm2003 rom, after thats done flash a 6.1 rom at will. worked for me!

Related

how to reset htc kais 130 pls ?

hello, i did try soem options like press the 2 front keys + use stylus, but its not working.
i also try the use comm btn + camra btn+ stylus and agian not work. any help pls.
i am stuck with a password in kais 130.
thks
press and hold both softkeys and then press the reset button with the stylus keep holding the softkeys. if it doesnt work keep trying
and dont put a password that you cant even remember
Yeah, I've found the hard reset option to be finikle, but if you keep doing it eventually it will get there.
There is no limit on the passwords you can try, so try all the obvious ones first. This is assuming it is your Kaiser
If you have Sync'd with ActivSync and Outlook then once you have reset and let the operators customisations go through hook it back up to the PC and resync. You might want to check that the names/machine id matches with what is on the PC before you do that so it doesnt create a new profile. I've got loads of the sods here now
hello ;it does'nt worck with me !
can you explain with pics
thanks
How to do a hard reset?
You see the two icons above the 'Internet' and 'Email' icons on the pad at the bottom of the PDA? Press and hold those two while pressing the stylus in the reset hole underneath and follow the onscreen instructions...
How to do a hard reset?
You see the two icons above the 'Internet' and 'Email' icons on the pad at the bottom of the PDA? Press and hold those two while pressing the stylus in the reset hole underneath and follow the onscreen instructions...
thanks i will try now

Startup problem

Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars. I do have the kaiser tweak and HTC 5 button homepage thingy. The title bars didn't change right away so I turned the device off and on. Yet when i turned it back on, it freezes on the ATT startup page and displays the three different numbers on the bottom corner, i think they're some kind of IP or radio. Does anyone have any ideas on what is wrong with my phone? I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
chadwick47 said:
Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars.my phone? ....
.....I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
Click to expand...
Click to collapse
I'm really surprised that a hard-reset did not restore you to OEM settings...
WHEN you get restored to where you want it... Try: http://rapidshare.com/files/68506785/UI_TWEAK.ZIP
It works awesomely!
It even catalogs all .tsk files and U can export as well.
Best of luck!
trb
just an FYI:
HTC Kaiser - TyTn II - T-Mobile Vario III
A software option is also available. Start> Settings> System> Clear Storage.
Type 1234 in the box and tap YES.
===> OR <===
Press and hold the Left & Right SOFT KEYs and at the same time use the stylus to press the RESET button. Release the stylus but keep pressing the SOFT KEYS until you see the Hard Reset warning screen. Release the SOFT KEYS and then press the LEFT PHONE KEY.
Not from me, credit:
http://www.4winmobile.com/forums/wi...ow-hard-reset-your-wm-device-device-type.html
Just to be clear, the soft keys are those two above the keyboard when the device is slid open....? right? Also should the device be powered on when I do this? How long to I have to hold down the buttons? Thanks for all the help!
Thanks I was able to do the hard reset, I didnt know the correct soft keys.

Help me upgrade to WM6

Hi,
I am a total noob and looking to upgrade to WM6.
I have literally been reading threads all day and can see various different concepts. I have done my best to read all the guides but I am very nervous of bricking my phone.
Is there a simple straight forward way to upgrade it to WM6? I have looked at Kitchens - seems like I could just do that but not sure... im on windows 2003, it mentions WM5 and a hardset - could do a hard set with my one.
Also have seen instrucions about establish G3 and G4, dumping ROM and unlocking CID... is this neccesary?
Basically I have unlocked the SIM.
I just want to get WM6 on my 02 XDA II and mobile office (particularly outlook).
Any serious help would be really really really appreicated.
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt_noID.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
ather90 said:
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt_noID.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
Ghehehe i had put my money on you Ather for sharing your Hima Knowledge.
hehe..thanks =)
Ahhh Man you r a legend, I'm going to try it now and if it works I'll be writing songs about you to my grandchildren... or make a paypal donation... let me go try it.
Ok I installed one rom but the screen went white - I reasoned it might just not work on mine so I tried one by Ather and it seems to work.
I love you guys. Thanks so much I do really appreciate it. Where do you want me to make a donation too?
the link to my paypal is in my signature oh and congratulations, enjoy WM6.1

Is my wizard totally bricked?

hi, please! need help... after I've flash the
Wizard_Love_2.26.10.2_WWE_Novii_CF2 on my G3 device the rom is very slowly and my PC doesn't recognized my wizard when it connected with the USB cable.
any solution how can I change this rom?
many thanks
i can go to the tri-color bootloader mode, is it say somthing?
mine did that yesterday....maybe try a hard reset:
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, [contintue to hold the two side buttons] hold down the navigation pad for ~4 seconds until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.
That's what I did and it worked for me =)
thanks but it doesn't work, the main problem is that after the hard reset the rom is very very slowly (like 7-8 seconds from the moment you tap the "start" till the start menu come)
the PC doesn't recognized my wizard so i can't change to another rom....
I can get into the tri-color mode, does it say that maybe it's not bricked?

Xperia password problem

Hi all,
I hope you can help me a friend has a xperia and he has setup a password for it but with letters and with the touch screen keyboard, but now he can not enter letters only numbers i tried everything(soft reset, hard reset, start up the bootloader etc.) but nothing helps.
I can not connect it to my pc with ActiveSync, i tried several methods to hard reset the device.
- left&right + power button
- left&rigt + soft reset (power + volume button)
- left&right + stylus in back
http://www.xperiax1.net/forum/xperia-x1/546-tutorial-soft-hard-resets.html
http://forum.xda-developers.com/showthread.php?t=437607
But nothing works.
Has anyone a solution how i can reset or flash the phone.
The date inside it is not important, important is just to make the phone usable.
Thanks in advance?
Try using the keyboard, DUH. Turn off the function or caps toggles.
The password is CAPS specific also
so if it is something like 2hOmosapian
then if you type down 2homosapian
it will not work, you have to type down exactly as it is suppose to be: 2hOmosapian
Thanks for your help but it doesn't work i tried it several times.
Is it possible to reset the password or to format the phone some how.
I managed to get the touchscreen keyboard on the display and i am entering there teh password but it is not working.
Aojo00 is the password that has been set.
tafil said:
i tried several methods to hard reset the device.
- left&right + power button
- left&rigt + soft reset (power + volume button)
- left&right + stylus in back
Click to expand...
Click to collapse
I have tried the same you were into and also i failed to hard reset my device
Are you using the updated ROM version or the original?
I have updated my ROM version during March
Does anyone has a solution for this problem?
First, the passwort-protection is useful if your X1 gets stolen, therefore any hint given in an anonymous forum on how to override this does not feel right for me. If official bought I would go to SE service.
Don´t yell at me because I bring that up, but if "your friend" has bought the X1, beeing aware of using a business PPC with WinMob, with all the opportunities to tweak, tune, configure, so not a simple mobile phone, why does he ask you to help him with his password?
But if the password is the one your friend has set, and everything is legal, I wonder if the "0" (zeros) could be "O"´s or "o"´s, too much of them in the password for my taste.
Sorry, but even if my thoughts are not correct in your special case, you will agree that we should not help people with this toppic without asking questions, right?
There is an important side i would like to bring up.
I believe that there is a lock after certain times of invalid entries, in other words.. after some wrong entries, the system will lock down for some time even if you have entered the valid password during that lock-time.
So, my advice is to keep nice interval between each bunch of trials, say 10 min. top
Am i missing something?
Isn't there a puck code? To be used after failing to enter the correct password after three times?
left /rigth +vol down +power is correct

Categories

Resources