Easy way to stop screen blank on making call... - Touch Diamond, MDA Compact IV General

After messing with reg tweaks to no avail, I came upon this solution to stop the screen going black after making a call and putting the phone to you ear.
I don't know if anyone has made this suggestion before, because I'm too lazy to check.
Before pressing the call button, place your thumb (or other digit) over the light sensor on the top of the phone. Then make the call.
I suppose as a permanent (although ugly) hack you could black out the sensor area with some tape or something.
HTH
paul

paulkorosi said:
After messing with reg tweaks to no avail, I came upon this solution to stop the screen going black after making a call and putting the phone to you ear.
I don't know if anyone has made this suggestion before, because I'm too lazy to check.
Before pressing the call button, place your thumb (or other digit) over the light sensor on the top of the phone. Then make the call.
I suppose as a permanent (although ugly) hack you could black out the sensor area with some tape or something.
HTH
paul
Click to expand...
Click to collapse
Hi paulkorosi,
You could also try Diamond Tweak and play with the # 1.3 tweak.

Sweet - I missed the light sensor setting in the registry - works an absolute treat... Many thanks.
And here I was thinking I'd come up with my very own bio-hack.
Now all I need to do is work out how to get numbers and arrow keys to display on the keyboard like most other pda's and I'd be over the moon.
Cheers,
me.

Thank you ... what i needed

MonteCristoffOn said:
Hi paulkorosi,
You could also try Diamond Tweak and play with the # 1.3 tweak.
Click to expand...
Click to collapse
Trouble is this tweak does not work for a lot of Diamonds. I have the light sensor disabled via Tweak #1.3 and it is not really disabled at all. Also tried placing my finger over the sensor before making the call and the screen still blanks. I am starting to suspect a hardware/phone specific factor to this issue. I have never been able to prevent blanking with 5 different ROMs and trying numerous cominbations of the 5 different registry tweaks floating around these forums.

Hmm - I only tried the thumb thing after changing some registry settings as per the tweaks post, as well as messing with another one - HKLM\Drivers\BuiltIn\RIL\FastDormancyRule - set to zero, mind you, I have no idea what this actually did. It certainly didn't blow anything up.
Maybe check the registry for the tweaks as per the tweaks thread (HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall and HKCU\ControlPanel\Phone\Sleep) and then try the diamond tweak app again??? (You've prolly already done that anyways)
DUH - I just read the rest of your post - you've already done all that.

paulkorosi said:
Sweet - I missed the light sensor setting in the registry - works an absolute treat... Many thanks.
And here I was thinking I'd come up with my very own bio-hack.
Now all I need to do is work out how to get numbers and arrow keys to display on the keyboard like most other pda's and I'd be over the moon.
Cheers,
me.
Click to expand...
Click to collapse
Make sure you have keyboard selected and not qwerty.

Related

Poorly-responding Keypad

On my Tilt I usually dial via touchscreen using smart dialing on the standard keypad. I've disabled vibrating feedback for keypad presses but it's still abysmally slow and drops keypresses. Any advice?
Try disabling screen tap sound in settings. Check out kaisertweak and it's wiki if you are noting keyboard unresponsiveness in general.
gasman858 said:
Try disabling screen tap sound in settings. Check out kaisertweak and it's wiki if you are noting keyboard unresponsiveness in general.
Click to expand...
Click to collapse
ooo.i have the same problem (i guess). But i have screen taps sounds disabled. i'm a complete newbie with pocket pc, And what exactly to do?
I have already disabled the tap sounds. I have Kaisertweak. Do you have anything in particular you could point out in the wiki for me?
Does your touchscreen work well in other programs? There is a known issue with this.
There are several settings in Kaisertweak listed under TouchFLO for sensitivity/finger pressure/sound and I believe nikagl has recently updated the xml adding extremely high settings for some of these. I think the .exe has also been updated.
Some users have turned off scrolling (TouchFLO/scroller) also in KaiserTweak to get the screen to respond a bit faster - that's a bummer if you like scrolling tho...
Make sure you soft reset after changing these values.
Cheers-
Touch works fine everywhere else. I've disabled TouchFlo and will see if that helps.
I've also read here that you can increase the screen sensitivity threshold, as explained above as follows: With Registry Editor (Resco), go to HKLM/drivers/touchscreen sensitivity something, increase the rate.
The new Mobile Shell 2.0 has its own sort of dialer that works perfectly without lag so it's obviously just bad coding for the standard dialer.
Having used the Shell lookup some more I've decided it's nice but it can't really replace the default dialer because the phone function is central to that screen. Does anyone know of a nice super-crisp dialer that also has smart dial?

Couple of (I Hope) Easy Tilt Questions

I had an 8125 and now I have a tilt. In making the switch I have run into a few anooying problems that I am sure someone already solved? I have looked all over the forums so if these are answered, could you please point me in the right direction?
1) The ever popular PTT issue. Took me a while but I got it going. It was interesting that there was an incompatibility between the fix and BatteryStatus. Not sure what THAT was about? But it is working now.
Soooo...How do I get button FIVE to appear on my button maps? Neither the stock button feature in the settings nor AEButton Plus shows button 5, the camera button. It would also be kewl to map the OK button on the side, but I am guessing that is too much to ask? *Blink*
2) I have set the brightness at about the medium level (that was a disappointment because I was able to set it to the lowest on the 8125) but somehow the backlight keeps going dim after a time. I have looked all over the parameters to configure this but I can't find it? How do I keep the display from going dim on me? I have the tilt set to sleep at 1 minute and I do not have the backlight going dim at all, so I don't know what else to do?
3) Now that PTT button is mapped, I did what all of you did, I set it to Voice Command. But of course the push and hold I want the convenience of RECORD like I had on the 8125. I have tried all of the shortcuts and such I could find on this site and everyone of them put the voice recorder on my screen but did NOT initiate the record feature. Is there no way to do this on the tilt? I think I remember something about a parameter? /b or something like that? I tried to find it again but I was unable to.
Thanks for your help, guys...
Thomas <><
http://www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come the Light: A View From Inside the Autism Puzzle
Author, Light On the Horizon: A Deeper View From Inside the Autism Puzzle
ThomasMcKean said:
I had an 8125 and now I have a tilt. In making the switch I have run into a few anooying problems that I am sure someone already solved? I have looked all over the forums so if these are answered, could you please point me in the right direction?
2) I have set the brightness at about the medium level (that was a disappointment because I was able to set it to the lowest on the 8125) but somehow the backlight keeps going dim after a time. I have looked all over the parameters to configure this but I can't find it? How do I keep the display from going dim on me? I have the tilt set to sleep at 1 minute and I do not have the backlight going dim at all, so I don't know what else to do?
Click to expand...
Click to collapse
Hi Welcome
Not sure bout your other two questions, but the backlight is easy
Look in Start/Settings/System/ Backlight
You want the second tab, which is for Battery Power.
There you can set the timeout for it.
PS: If you have already tried this, then sorry for pointing it out, but sometimes the obvious solution is hard to find
AEButton Plus
I am able to remap both the OK button on the side and the Camera button with AEButton PLus.
I do have a slight problem that I am looking for a solution and hope someone knows the answer. When I remapped the OK button on the side, the first press still gives me the start menu no matter what I have it set for. The second press does the function I have programmed for double press. But is there anyway to not have it give me the start menu on the first press? I have it as none in the standard WM6 buttons panel. And I have it as lock phone on AEButtonPlus for both the first press and double press. But it always requires double press to make it happen. Any ideas?
-- Charley

VibeTonz (vibrate on screen tap) like app for WM??

i've been searching for an application that can make my phone vibrate on screen taps. i would try to use this instead of sound on screen tap because it looks like a good idea. so i'm very interested in this kind of app and i hope i'm not the only one.
during my search i found something called VibeTonz, but this does not come as a program, it is a feature built in some devices.
here on xda i found some threads about dialpad vibration and this thing works, so i think it would be possible to create something that would make phone vibrate on any screen tap.
P.S.: sorry for my bad english. hope you could at least understand what i'm talking about
yeah it would be cool to see something like this, the dial pad vib program is freaking sweet.
hmm.. yeaa that would be kinda cool. btw.. ur english is perfect
you mean something like this:
Phone pad vibrate when tapping numbers?
as i mentioned above, there is a cab like this on xda forums, but it only works for dialpad. what i need is something that could make the phone to vibrate on ANY screen tap. what i don't like about dialpad vibrate cab is that it makes the phone vibrate just as long as you keep dialpad number pressed,so if you just tap the number too fast there is no vibe or it is too short and so it's not suitable for fast typing. the thing that i would like to see would vibrate for fixed time (let's say 100ms) on any screen tap (including dialpad tap). i think this kind of touch screen response would make the use of it much easier and faster. but i can't know that because i didn't try this.
maybe if someone has a VibeTonz enabled phone could tell as about experiences with this kind of response?
anyway, thanks for your efforts and i'm glad to see there are some people supporting this thread and some interested in this.
I am searching for this app to, it would give great fingerpushing feedback. It will feel like pushing "real" buttons on your screen
About the vibrating dialpad: i thought i read somewhere that you can alter it so that it will vibrate instantly.
I second that!
I'd love this kind of app. My kaiser has particularly flat keys on the keyboard and there's no travel to them. So I stumbled across the dialer vibrate cab while looking for a solution. I'm trying to figure out if it's possible to mod that cab's registry entries to make it vibrate on any keypress, such as while typing... but so far no luck. A touchscreen vibrate cab would be awesome too. I think any program that is possibly developed should include settings for both the touchscreen and the keyboard.
Someone with a little spare time want to work on these ideas? Pretty please?
Bump!
I didn't have time to try this, but if you are interested here is the link:
http://forum.xda-developers.com/showthread.php?t=425063

BackLight brightness adjust command line utility for Kaiser aka TYTN II

I dunno if I'm only one who has this problem but when I'm occasionally on sun I can't see nothing on my Kaiser and it's really difficult to setup backlight brightness on touchscreen which u can't see.... So I've been looking alot if there is some utility which I can link with button or gesture and I haven't found anything... So I've wrote my own utility. Feel free to use it as well if u find it useful -> http://lobster.ic.cz/?page=bl
is this useful or is there easier way to do that??
Been searching for an app like this for a week.
Works great!
Thanks.
Here's another program that gives you a today plug in for it:
http://forum.xda-developers.com/showthread.php?t=412896
I'll b trying yours tho as I like the idea of UL with icons for up and down
Cheers,
Matthew
I made a cab with this program mapped to the PTT button. I have a AT&T Tilt, Im not sure if your phone has a PTT button or if its called something else or whatever.
With this, just run the cab then I tap the button and it changed the brightness really quickly, no menu or anything, I love it! If I walk out into the sun I just tap the button 3 times and my screen is bright.
Lobsterii, I love this program thanks a ton!
I'm glad that I could helped u out guys... actually there might be more funny stuff possible only if HTC release some documentation on theirs DLL files cos it's pain to guess arguments...
you did it all by guessing? I figured you would have decompiled the dll.
Truly excellent! I have also been looking for something like this for a long time.
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Thanks again for a useful app!
you did it all by guessing? I figured you would have decompiled the dll.
Click to expand...
Click to collapse
I've read some forum where someone pointed out that backlight function should be in some dll by HTC dunno where it was... Then I was googling "dll find export function" and I've found prog "DLL Export Viewer" which can show function names in dll. Unfortunatelly there is generally impossible to find out how many/what arguments the function has. So I've found function name like HTCUtilSetOnBatteryBrightnessLevel and I've simply try prototype int HTCUtilSetOnBatteryBrightnessLevel(int); but it crashed... so I keep going like int HTCUtilSetOnBatteryBrightnessLevel(int*); and it worked... voila...
pudifoot said:
Truly excellent! I have also been looking for something like this for a long time.
Click to expand...
Click to collapse
thx alot...
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Click to expand...
Click to collapse
done. + it's now compiled as an release version so it actually has 50KB less than old version... enjoy it's at the same place instead original files http://www.lobster.3web.cz/bordel/bl/index.htm...
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Thanks for implementing the feature I was looking for. A perfect application - it's small and fast, and it gets the job done with excellence.
Thank you. Works perfectly.
silentanvil said:
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Click to expand...
Click to collapse
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
lobsterii said:
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
Click to expand...
Click to collapse
Awesome! Thanks so much! I've also been looking everywhere for something like this!
Awesome!
Well done! I've been looking for ages for something to do this.
How to use bl02...
Something from lobsterii that helped me:
create link in Total commander (file manager) I think its in options "File -> >>>>> -> Create shortcut" then I have another file bl02.lnk then I open properties of the lnk file, I click tab shortcut and put the text of path into "" and after it I wrote parameters so it looks like
"\Program files\bl\bl02.exe" 1 3 9
OK dumb question and first time posting so don't slaughter me. If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct? Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display? If you get far enough to open the utility then its not that hard to move the brightness up. Sorry for the dumbness of the question.
volleykinginnc said:
If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct?
Click to expand...
Click to collapse
my bl02.exe doesn't put any button anywhere... it's just app which actually toggle brightness. U can try to run it via file explorer it should change brightness...
volleykinginnc said:
Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display?
Click to expand...
Click to collapse
There is plenty of programs to map this app to buttons, finger swipes and some other crazy stuff like voice commands etc.. For example I'm using FTouchFlo (u can use FTouchSl which is easier to configure) and map backlight change for finger swipes... Most easy way is just copy blXX.exe to /Windows/Start Menu/Programs/blxx.exe and then go to Start->Settings->(tab)Personal->Buttons and link it with some buton...
I'm just now at work so have no time for more explanation... but Once I get home I'll create some FAQ at download page cos... cos it'll be easier for all of us
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
volleykinginnc said:
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
Click to expand...
Click to collapse
I'm sure he won't be able to bypass A_C's S2U2, but (assuming you have a Kaiser, you didn't say) if you enable dpad in S2U2 you can always hold your right dpad button to make sure S2U2 is unlocked, even if you can't see the screen, and then hit the button for the "bl02.exe 9" link.
Ha ha...you guys are awesome! Right Dpad enabled and now it works like a charm even in the brightest sun!! Thanks for the great application...makes a big difference in usability.
Some of you experts ought to make a list of these application gems (this program/kaeser tweaks etc) to make it easy for the noobs like me. This is good stuff!!

Back Light Modification

I would like to find a way to modify the amount of time the backlight is on for the bottom buttons. I know there is a MOD that uses these for notification in place of the LED we don't have; so I am guessing someone knows how to modify this setting. I would like to be able to make the backlight remain on anytime the screen is on. I am more than willing (and would actually like to) to do the work if someone here can get me started.
Thanks
Jeff
no one has yet found a way to do this, not sure if it's possible, but who knows.
https://github.com/project-voodoo/backlightnotification/tree/master/liblights/
^ that's neldar's work for backlight notifications, lights.c is the modified file and lights.c.original is what was modified. go ahead and play with that to see what you can find out.
Thanks for the info and link. I will certainly look into it and see what I can do. Persistance may pay off eventually!
Jeff
actually the epic 4g has this setting built in. on that phone the slide-out keyboard back light has the same timer as the 4 soft keys and you have the option to sync both to the screen.
so maybe posting over there to or just getting the epic source would help.
a.vandelay said:
actually the epic 4g has this setting built in. on that phone the slide-out keyboard back light has the same timer as the 4 soft keys and you have the option to sync both to the screen.
so maybe posting over there to or just getting the epic source would help.
Click to expand...
Click to collapse
the setting is still tied to liblights.c and it isn't tied to the length of the screen timeout, it's the softkeys tied to the keyboard keys (which use the same settings/binary)... the keyboard is just an extension of the softkeys so the solution would still lie in modifying liblights.c
Just get one of the i9000 roms with the setiron kernel, it has backlight notifications among other things.

Categories

Resources