Hi Everybody,
I've got a MDA Vario III bought back in Dec, didn't had any problems till now. But yesterday my MDA didnt started and when it did, I came up with problematic keys on its face !!!
The Keys for: Making Call, Ending the call, Windows Key and OK key on the face of the handsets, when pressed overrides the function of itself by the function of the key near to it !!!
For e.g. If you press Call button, it will automatically start calling the last number (which shouldn't be the case, it should just open the dial pad!) and on top of that it opens the Contact (which is the Key beside Call button). I've tried formatting the handset twice and I am no way pressing the two buttons at same time !
Please do help me to find where the problem lies and its solution. Its kinda urgent please. Thanks in Advance
Please Help Me Folks
Please Help me folks, what can I do with it to get it working properly ?
try SK Tools I always use autoclean and free-up RAM and that helps me settle this sort of problems. It actualy does the same as a soft reset.
this was the lazy version of the answer
Related
Hi all,
Just got my TyTNII yesterday to replace old O2 Zinc.
Everything was good, until i found out the button 5 (originally assigned for program camera) doesn't work.
I try to assign button 5 another program but it just doesn't work and when i reassigned button 6 for camera, button 6 works fine.
Everytime i press button 5, the response given is backlight will turn on, button 1 to 4 light will also turn on. but just that, the program assigned doesn't run.
I really don't hope to bring it to Service Center, as in my country, for PDA, even we claim in the same day we purchase, we won't get any replacement, and it will take one month (more) to return and sometimes just to let u know they didn't do anything. My previous O2 Zinc was also the second unit.
Help me please.
Keep it assigned to camera, but keep pressed a little longer to lunch the camera.
Hey I got my TyTN II yesterday, quite excited about the device. But I have the exact same issue. Did anyone else run into this problem? And any solutions for it, or should I ask for an exchange? Help please.
Ths button is a dual mode button for the camera. Light press to autofocus then deep press to fire.
If you re-assign it you need to press deeply to activate
Thanks for the reply, that was silly of me just figured it out.
Thanks for the reply.
Afternoon All,
My MDA Vario III keeps making a noise then shutting itself down. It does this several times a day. A real pain im sure you can imagine! Is there a software fix or am I going to have to send it back to T-Mobile for a new one?
Thanks
Jon
Have you tried a hard reset to remove any dodgy applications you may have installed?
If yes then bodge it off to T-Mo.
and how would one perform this hard reset you speak of?
Im a total noob at mobile devices
For all things Kaiser/Tilt/Vario III, check out the Kaiser Wiki link in my signature.
For the hard reset in particular, press and hold both soft keys on the front of the device, and press the reset button with your stylus. Release the reset button, but continue holding the soft keys for another 5 seconds. The screen will display a warning that pressing "Send" will erase all data. Press the Send button. **This will erase all of your data**
hi there,
my kaiser and my mates one too, the start button freezes after handing up on a call....
i tried using the red button to hang up, then tried the end key,,,
the menu button start doesnt appear, it just says phone,
only way i found to go around this is to press the power key to go in to sleep mode then press it again,,, to wake it up...(this has started to be really annoying...)
it then works fully...wierd,,,i contacted my netowrk operator and they dont know whats wrong, they just suggest is might be a fault??? but i told them my mates htc tytn ii (kaiser) has the same problem, and he got it from a different shop....and 4 months later,,
mmh still waiting on t-mobile uk,. to find a solution,, aint going to hold my breath...
can any one help, or advice me that the new windows mobile 6.1 will fix this?
any one know when tht is coming out officially??????????
this is a stupid thread.
just upgrade your rom.
where do i get the new rom.....
and would it invalidate my warranty on my kaiser
start here
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
read everything there
hiya, I hope someone can help me here, I got this phone a week ago and love it but for some reason when I text on phone pad or compact qwerty, when pressing the buttons it only comes up with the numbers assigned for the buttons and not any letters. Have no idea how to rectify this, tried all the usual under options but have come up short. Please help!! Thanks!!
Dear experts,
I have HTC tytn ii which i bought from Singapore (in 2008) when I was working there. Now I have shifted back to India and there are some issues with my phone and local HTC support people said they cannot help since the handset is bought from singapore. I wont be going back to Singapore and their support hotline is also down, infact Singapore dont have one. Did a lot of search on net and came across this forum. I hope to receive some guidance from all the tech experts.
I did see FAQ and sticky threads but its too techy and dont wanna take any wrong step. Following is the list of problems:
1. I cannot receive/disconnect calls using the front buttons (green & red). Infact except the center button none of them is working.
2. The roller key on left side top - push function is operational but the roller function is not working.
3. Query key board - None of the keys are working cannot type. When i push the soft reset button (right side top button which we use for standby) then caps light on query keyboard turn on and when i slide the keyboard in I can see Fn button light on.
I have reset the phone using clear storage but the problem still persists.
I would be very thankfull if anyone can guide me through. I am not sure whether its a hardware problem or some drivers problem.
Amol
where are the experts?????????? kindly help
It seems to me that the ribbon cable inside the phone is not inserted completely or is broken. If you take the phone apart you might be able to reseat the cable and see if that helps.