Database Develop

Ghost device? Not registering..

Hi there,
Firstly, be gentle - I'm new to all this.
My Kaiser has recently started to mess with me. It will not connect with my PC for activesync. I've tried plugging it into PC's at work too all with the same problem: the host PC's do not notice the device being plugged into the USB however the phone will start to charge from the PC's USB.
I've tried disabling the "advanced network functionability" toggle, and even different USB cables.
I really don't want to hard reset the device until I get Sprite working (after an upgrade which I cannot do due to not being able to connect).
Whoever can help will make my Christmas card list this year
Frank.

You can have SPB backup your phone to an executable .exe file on you SD card if you have room and then hard reset.
Only problem with this is when you do a restore, you will probably restore the fault again.
Best option is just to backup your data (no apps or settings) with SPB, do a hard reset and put any cabs back on one by one to check if its one of those causing the prob.

Thank's for the suggestion Farsquidge. It looks like this will have to be the solution unless others have been through this.
It's annoying that WM6 is such a pain. So many small bugs on this device it makes me question where I'd rather settle with a mobile: Versatility + unreliability OR Normal phone + reliability.

effsee said:
Thank's for the suggestion Farsquidge. It looks like this will have to be the solution unless others have been through this.
It's annoying that WM6 is such a pain. So many small bugs on this device it makes me question where I'd rather settle with a mobile: Versatility + unreliability OR Normal phone + reliability.
Click to expand...
Click to collapse
I hope someone can help you further on this.
It can be a pain to get them set up just how you want them but once working they are great!
With all the complex functions it has, there is no wonder people have problems (how many times do people reset their PC's or have a game or app crash it?)
That's what this forum is about, no-one knows everything and sharing info is the best way to do it. I find tons of uesful info and tips on here that just keep on enhancing the unit but, inevitably, I may add an app, or a tweak just not right for my phone and have to resort to the old hard reset and put it all back on again.
It's fun but gives you a wakeup kick at times!

Forgot to suggest, if you do not already have SP Backup, (because you cant sync) put your SD card in a compatible card reader on your PC then run it on your phone.

My suggestion would be this - download the trial for SPB Pocket Plus and install it (they have a CAB available). In the settings, go enable the "Safe Mode" boot option and soft reset. When the Safe Mode dialog appears, boot in safe mode and see if your computer recognizes the phone now.
If it does, something you've installed is messing with your phone. Start rolling back installations and resetting taking off the app at the top of the list under Remove Programs. After each app, boot in normal mode and see if you can connect. If not, rinse and repeat.
If you ever get a "normal" connection, you'll know which app or combination of apps caused your problem.

PerfAlbion said:
My suggestion would be this - download the trial for SPB Pocket Plus and install it (they have a CAB available). In the settings, go enable the "Safe Mode" boot option and soft reset. When the Safe Mode dialog appears, boot in safe mode and see if your computer recognizes the phone now.
If it does, something you've installed is messing with your phone. Start rolling back installations and resetting taking off the app at the top of the list under Remove Programs. After each app, boot in normal mode and see if you can connect. If not, rinse and repeat.
If you ever get a "normal" connection, you'll know which app or combination of apps caused your problem.
Click to expand...
Click to collapse
Nice one!! I only have the SPB 'Lite' that came on the HTC CD that does not have that option. Will look at their site for an upgrade myself.
Cheers..

Kaiser going crazy (looks haunted...) AGAIN - Update2: Not Solved?

Ever since returning from repairs, my Kaiser is giving me more problems than before.
First, I apparently lost the ability to hard reset my phone using the 2 softkeys & soft reset button method.
For more: http://forum.xda-developers.com/showthread.php?t=384581
First thing I did when I got my phone back, was flashing the latest ROM from Dutty (Dutty's Official WM6.1 5.2.19209 Release). After performing numerous installations and soft resets, my device went crazy after yet another installation and soft reset.
Just before my Kaiser takes me to the Today screen after (re)booting, the phonepad pops up and seems to be 'pushing numbers out of itself'. Confused by the explanation? Just take a quick look at the short vid I made.
http://www.youtube.com/watch?v=YGkot2-mbbI
(Fast forward to 01:00 to see it going crazy. Long after the vid ends this continues)
Anyone got a clue as to why this is happening? Or has my incompetence reached new heights and is that to blame for my problems?
Thanks in advance
P.S.: In the meantime I have hard resetted my device, but I'm still curious...

call at&t and get a replacement. Easiest thing to do.

Try load the factory default ROM.

FAx
The kaiser has been known to act haunted, thats why it comes in black.
Fix: When applying this fix avoid looking at the screen to avoid the image inside the device that you want to exorcise. Unplug fully and remove battery to prevent an escape through the wires; also ensure that you disconnect any usb devices to avoid an escape to your computer.
Once you have isolated the device. Find the packaging and insert carefully, ensuring that it is packed safely to avoid any breakage resulting in an escape to your home. Then ship to the place you purchased it from and ask them to send you back one that is not possessed.
Good luck.

alexn2 said:
The kaiser has been known to act haunted, thats why it comes in black.
Fix: When applying this fix avoid looking at the screen to avoid the image inside the device that you want to exorcise. Unplug fully and remove battery to prevent an escape through the wires; also ensure that you disconnect any usb devices to avoid an escape to your computer.
Once you have isolated the device. Find the packaging and insert carefully, ensuring that it is packed safely to avoid any breakage resulting in an escape to your home. Then ship to the place you purchased it from and ask them to send you back one that is not possessed.
Good luck.
Click to expand...
Click to collapse
Very dramatic - you don't work in Hollywood do you?

gqstatus0685 said:
call at&t and get a replacement. Easiest thing to do.
Click to expand...
Click to collapse
He's in Belgium

ach2 said:
Very dramatic - you don't work in Hollywood do you?
Click to expand...
Click to collapse
Is that a hint for a career change...... the loss of one's tilt is quite a dramatic event.

@alexn2
I already called in help from the Vatican, but it will take some days before the first batch of exorcists arrives (haunted was a sarcastic expression). Any explanation in the meantime?
@gqstatus0685
This device is a replacement which I got back last week. But it seems to me that I will need to send it back again. Another week without my Kaiser...

alexn2 said:
Is that a hint for a career change...... the loss of one's tilt is quite a dramatic event.
Click to expand...
Click to collapse
care to sign up for ma 4th installement of the exorcist?

Damn this is scary. Call the Ghost Busters!!

WTF?
I just don't get it...
I now have my 3rd Kaiser, since I had issues with the first two. One of the problems my second phone had was the 'haunted' problem as described above.
My Kaiser has been working like a charm for several weeks. I first used the stock ROM, then switched to Dutty's ROMs. I used 3 ROMs: Apr16, Apr29 and Jun07 release.
I installed the Jun07 release today. After installing and configuring the same software I had before upgrading the ROM, guess what?
HAUNTED AGAIN... WTF?
I loaded the ROM, did multiple hard-resets, soft-resetted after customization, loaded CABs, configured them, rebooted several times and when I had finally configured every app => TOTAL Clusterf*ck... (again)
Sometimes it does boot normally BUT when I press the 'Send'-button and the dialer opens => Kaiser goes LOCO again...
Anyone got any idea as to why this happens?
NOTE: I have the latest SPL + Radio NEON 1.58.25.17 (included in the ROM)

I did some additional testing. I had SPB Pocket Plus installed an had the Safe Boot option enabled. So I did some testing in safe mode.
The phone boots 'normally' to safe mode. No apps or services are loaded, and I can open the dialer and even enter numbers to dial. But when I try to delete a number using the backspace in the dialer => again haunted

I just discovered the problem. I always try to install most of my apps to my Storage Card.
Some of those apps is the Microsoft RDP (remote desktop) client.
Installing it to the Storage Card caused the phone to go crazy. It has to be installed to the Main Memory.
NOTE: After discovering the problem, I did find other posts across the forum reporting problems if the app isn't installed to the main memory. Since I found the cab on someone's 4Shared account, I wasn't aware of the installation requirements.
Thanks anyway for the support given

As posted before, I very recently flashed Dutty's Diamond V1 Build 19588 ROM (Jun07).
Today I tried playing WMV files with Windows Media Player for some performance testing. I loaded my first file and whenever I tried something, like fast-forward, switch to fullscreen mode,... my phone crashed and soft-resetted itself.
Guess what I got when the phone booted => The crazy dialer (haunted edition)... It kept doing this after every soft-reset until I removed the MicroSD card. The video I was trying to play was located on the Storage Card, so there might be a relation.
While I have done additional testing under the same circumstances, I haven't been able to simulate the problem.
I'm still clueless, so as always are ideas welcome...

Diamond is running extremely slow - TouchFlo won't start

Suddenly my Sprint HTC Touch Diamond is running extremely slow. TouchFlo 3D will not start. Various things runs extremely slowly like tapping on the start menu takes like 20-30 seconds to come up.
Rebooted several times. Turned off TouchFlo. Phone's still as slow as molasses?
What to do? Flash the ROM? If so, which I'd hate to do, where do I get the original Sprint based ROM?
Update: For some reason \Windows\manilla.exe never gets run. If I run it by hand then Touch Flo comes up. But it's still kinda slow.
Who/What starts manilla.exe?

Simply do a hard reset, this will reset everything back to original rom as in a factory reset.
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html

That would be wonderful if I didn't customize things. But I have - heavily. And I'll need to reinstall all my apps. I was hoping not to do that...

defaria said:
That would be wonderful if I didn't customize things. But I have - heavily. And I'll need to reinstall all my apps. I was hoping not to do that...
Click to expand...
Click to collapse
But this is the most likely reason it is running slowly... Needs a hard reset and start again - and be judicious with what you re-install.

Before doing a hard reset, have you tried a soft reset??
A soft reset for heavy users is almost required dally in some cases to release the memory from being attached to programs and the OS which is consider to be called "Memory Leaks." A typical problem for all 6.1 Roms.
This slow and sometimes unresponsive behaviour was what also experience as well. There are programs that help memory find it's home but sometimes a good old fashion soft reset is what's needed.
Last thing: Make sure that when you have flashed a new ROM to ALWAYS do a HARD RESET immediately. Not sure if you followed that procedure in your last flash. IF not, I'm afraid a soft reset might not be sufficient to remedy this issue for you.

Riker88 said:
But this is the most likely reason it is running slowly... Needs a hard reset and start again - and be judicious with what you re-install.
Click to expand...
Click to collapse
This is exactly what I was trying to avoid. A computer doesn't suddenly go from running OK to dog slow when you have not changed anything (I only rebooted/soft reset). The running of manilla.exe doesn't suddenly disappear.
Everything I install I install for a reason.

band27 said:
Before doing a hard reset, have you tried a soft reset??
Click to expand...
Click to collapse
Daily! If not hourly. WinMo is not known for being stable.
A soft reset for heavy users is almost required dally in some cases to release the memory from being attached to programs and the OS which is consider to be called "Memory Leaks." A typical problem for all 6.1 Roms.
Click to expand...
Click to collapse
I'm well versed in what memory leaks are. 'Round here we call them bugs. Being in the business for some 30 years now I can tell you that having to reboot an OS periodically is a sign of an extremely buggy OS. Unfortunately that's what WinMo is.
This slow and sometimes unresponsive behaviour was what also experience as well. There are programs that help memory find it's home but sometimes a good old fashion soft reset is what's needed.
Click to expand...
Click to collapse
There's a big difference between being slow and being suddenly SLOOOOOOOOOWWWWW.
Last thing: Make sure that when you have flashed a new ROM to ALWAYS do a HARD RESET immediately. Not sure if you followed that procedure in your last flash. IF not, I'm afraid a soft reset might not be sufficient to remedy this issue for you.
Click to expand...
Click to collapse
I've yet to flash this phone. I was hoping to avoid it. There are so many ROMs to choose from, some better than others. And I'm not looking forward to having to reapply all my customizations...

i get a problem like this occasionally after a restart. I need to hit the green dial key to get it to ask my PIN. after i enter my pin everything is back to normal.
just an idea

sprite backup
What you should do is when you hard-reset the phone and you have installed all your must-have apps (and the phone still runs smoothly) use Sprite Backup to make an image. This way when things go bad again, just restore the Sprite image to that wonderful time when everything still worked smoothly and you won't have to install all the apps again. Only the apps you installed after the image ofcourse... depends how often you backup
Works like a charm.
Be careful though, when you flash another rom, you CAN'T use the Sprite image anymore!! You have to make a new image then.
Hope this helps.

tilt keeps freezing

hey guys, not sure whats going on, but my tilt lately keeps freezing, but it only freezes when i go into landscape mode. i've ran the same programs for a long time (palringo, google maps, live search, kaiser tweak and srs wow) i'm not even running skyfire anymore, and i've uninstalled my opera browser but it keeps freeze. i've done some reflashes and hardware resets, and only ran the above programs, and it still ends up freezing when i put it into landscape. Anyone know what could be causing this? it doesn't matter if im typing landscape in notes, palringo, PIE or anything else, always freezes. The ironic thing is that if i bust out my stylus and type w/ that using the soft keyboard it seems to run just fine (but slows me down A LOT). any help would be much appreciated.

Do you mean your hardware keyboard lags?
If so in software is a speedup keyboard .cab.

stylez said:
Do you mean your hardware keyboard lags?
If so in software is a speedup keyboard .cab.
Click to expand...
Click to collapse
no its not a keyboard lag by any means, the phone literally freezes. i dont even have to type when its in lanscape mode for it to freeze, as soon as the screen changes orientation it freezes immediately

simbadogg said:
no its not a keyboard lag by any means, the phone literally freezes. i dont even have to type when its in lanscape mode for it to freeze, as soon as the screen changes orientation it freezes immediately
Click to expand...
Click to collapse
Thanks for clarification, just that you say soon as use onscreen keyboard no issue, are you using a stock ROM? Does it happen on a clean flash no programs installed?

stylez said:
Thanks for clarification, just that you say soon as use onscreen keyboard no issue, are you using a stock ROM? Does it happen on a clean flash no programs installed?
Click to expand...
Click to collapse
sorry, i should have given a lot more info, but i had to jet to class. Anyways, its not the stock rom, i'm running NATF's Lite rom (no TF3D). I actually downloaded originally around september/nov/dec of 08 (dont remember, but its been months that i've been running it). And never had a problem with it...now all of a sudden it seriously craps out everytime i run it. I tried running Hyperdragons IV Lite and i was experiencing some of the same problems. I'm really starting to think its one of the problems i'm running, so i'm going to to a hard reset (again) and see if it runs just palringo, and google maps w/out any problems. its just getting super frustrating to be honest. i'm running the exact same programs that i've ran for the last year, but now its deciding to act up. hopefully its something in the software and not hardware

ok...so i got home, and installed the OEM att tilt rom. really, no matter what program i install, pretty much anything. the freezing occurs. any out there familiar w/ cell phone hardware? i'm thinking that might be the cause, if so...do you think there's anything that can be done/replaced to fix it?

Hi, this started happening to my just today also! At first I thought it was the onscreen keyboard that made my phone freeze (as I have seen others with the same issue) and thought I could fix it by using another keyboard app. I used SPB's keyboard and it prevents my phone from freezing and I'm able to type things using it. BUT my phone STILL freezes when I put it in landscape mode and try to type something. It freezes after typing a couple of letters. This is stock ROM; I've never flashed it.
Is there a .dll I can use to repair or anything of the sort?
Btw, I'm using a Tilt. Thanks!

anyone have any method ..to prevent this problem???
I find that if restart the phone few times will freeze at gray screen .."the original HTC gray blank screen with loading box in the middle" but the antenna reception green light is normal blinking (all the button not functioning).... -solution have to press reset button below ...
so now everytime install new program very scare to restart .. if un lucky ..will stuck at that screen.... really wonder why ...is it the WM6.1 not stable???
I use motorola linux ..no such problem...

simbadogg said:
i'm running the exact same programs that i've ran for the last year, but now its deciding to act up. hopefully its something in the software and not hardware
Click to expand...
Click to collapse
Try the relevant ROM thread also look at your hardSPL version. Some users have fewer freezing probs just by updating hardSPL.

tsfatt said:
so now everytime install new program very scare to restart .. if un lucky ..will stuck at that screen.... really wonder why ...is it the WM6.1 not stable???
Click to expand...
Click to collapse
Not at all, there's definitely something wrong with your setup if it wont even boot fully. Maybe a hard reset and some testing between installing each individual program will weed out the culprit. That said I've found (at least the HTC official) WM 6.0 ROMs to be much more reliable and stable than WM 6.1 ROMs.

Flying Kiwi said:
Try the relevant ROM thread also look at your hardSPL version. Some users have fewer freezing probs just by updating hardSPL.
Click to expand...
Click to collapse
Sorry if it's a dumb question, but is there a HardSPL update for OEM OS?

DaDragonChild said:
Sorry if it's a dumb question, but is there a HardSPL update for OEM OS?
Click to expand...
Click to collapse
Not as such - hardSPL is made by dedicated folks who have customised the OEM version but installing it will mean you no longer have an 'official' setup. That said, you can always revert to the official HTC SPL if needed for eg a warranty return. You could also install a newer HTC SPL for your ROM (as long as it's compatible *be careful about this* - eg I'm using the 1.93 HTC SPL with my ROM instead of the 1.56 SPL). This is all explained in the Kaiser wiki (through the xda-wiki button above) so it's well worth having a good read there

aaaahh I looked around. and I can't find a driver to reinstall for the hardware keyboard... I'm assuming this would fix it~

Sorry to double post but I just wanted to say I fixed the problem by backing up and restoring with SKTools after doing a hard reset. It makes me think, what exactly caused the problem in the first place if doing this fixes it? Is there anything that SKTools leaves behind in an All System backup? Perhaps something messed with my registry causing the keyboard to freeze the phone when used.
I'd hate to think my phone can actually get spyware now. Maybe Skyfire's true desktop viewing of webpages allows for this to happen?
Let me know what you guys think

" used Spb's keyboard and it prevents my phone from freezing and I'm able to type things using it. BUT my phone STILL freezes when I put it in landscape mode and try to type something. It freezes after typing a couple of letters. This is stock ROM; I've never flashed it."
If I will you to avoid ...uninstall this soft keyboard ... use back the original keyboard at the time being and see... if u restore back what is the diff compare to now ... If I not wrong still the same ...
FYI, I got this freezing problem is after I have install PCM kb 0.14 ...then I try install & uninstall & install ..and need to restart the phone ..2 out of 4 time is freeze at loading screen .. now really worry is it b'cos I uninstall it at the same time have remove certain original files .....
WM is diff with windows ...lack of tool to chk which system files damage .... I really hate hard reset ..just like computer... imagine keep format the hard disk ....

Hard reset comparible to system recovery process
tsfatt said:
WM is diff with windows ...lack of tool to chk which system files damage .... I really hate hard reset ..just like computer... imagine keep format the hard disk ....
Click to expand...
Click to collapse
If only restoring a full size PC was as easy and quick as hard restting. Sure there's a little work involved in reinstalling apps after completing the hard reset but if the apps are well designed ones that install via activesync, that's as easy as going to Activesyncs add and remove programs function and ticking a box. If this is not available then maybe the old app is the cause of the problem?
A hard reset every now and again is very useful for maintaining peak performance and it certainly weeds out whether a problem is hardware or software related pretty quickly.

[Q] Disable Hard Reset

I would like to write simple security app for my phone, that wouldn't allow manipulating with mobile after it is ordered to enter disabled mode. I thought about it, and there are 2 things needed to be done. First I'll have to disable screen - not a hard task, but secondly, I need to ensure anyone won't be able to hard reset phone until mobile have disabled state. Normal reset won't be a problem, I plan to start that security app right after the phone powers up and load windows.
If the phone won't respond to commands and to perform hard reset(which would allow bypassing app by wiping it), phone is useless to anybody.
So if I want that to work, I need to disable hard-reset option by any means, but not disable whole phone.It got to be able to power up so app can again run and undo all changes. Is there any way to do that and don't break anything?
I've seen similiar app to what I want build, but it disabled phone totaly, so even after recovering it, it was unusable. That is where I want to improve, so I'd be glad if someone could help me.

i know nothing about mobile programing, but got some though regard what you want to achieve, you may need a customized password protected bootloader.

Dark_Raven said:
I would like to write simple security app for my phone, that wouldn't allow manipulating with mobile after it is ordered to enter disabled mode. I thought about it, and there are 2 things needed to be done. First I'll have to disable screen - not a hard task, but secondly, I need to ensure anyone won't be able to hard reset phone until mobile have disabled state. Normal reset won't be a problem, I plan to start that security app right after the phone powers up and load windows.
If the phone won't respond to commands and to perform hard reset(which would allow bypassing app by wiping it), phone is useless to anybody.
So if I want that to work, I need to disable hard-reset option by any means, but not disable whole phone.It got to be able to power up so app can again run and undo all changes. Is there any way to do that and don't break anything?
I've seen similiar app to what I want build, but it disabled phone totaly, so even after recovering it, it was unusable. That is where I want to improve, so I'd be glad if someone could help me.
Click to expand...
Click to collapse
hey, this sounds like a cool task. I can help with the SPL modification.
you would also want to protect it from reflashing with another ROM.

cmonex said:
hey, this sounds like a cool task. I can help with the SPL modification.
I think it might be just enough for now If we could password protect our systems from being wiped/flashed, but as I read, this wasn't possible. I'm not sure if times changed, but with android and win7 becoming popular, I doubt that anyone will take an effort and I don't know enough to make it by myself...
Click to expand...
Click to collapse

Dark_Raven said:
cmonex said:
hey, this sounds like a cool task. I can help with the SPL modification.
I think it might be just enough for now If we could password protect our systems from being wiped/flashed, but as I read, this wasn't possible. I'm not sure if times changed, but with android and win7 becoming popular, I doubt that anyone will take an effort and I don't know enough to make it by myself...
Click to expand...
Click to collapse
this can be done in several different ways by changing SPL...if you're interested PM me and I can sort something for you.
Click to expand...
Click to collapse

This will be cool app .
I think what cmonex said may help by securing SPL itself, to start with.
Thanks.

Disable Hard Reset?
I think someone has already done that - and sent it to me in a virus in an MMS. My phone keeps wanting to "Power Off". If I respond "Yes", it immediately restarts. If I respond "No", it wants to "Power Off" again after a couple of minutes. The phone doesn't respond to the power button. I can't perform a hard reset.
I've been trying to find a copy of the shipped ROM to try reflashing it, but none of the links to the Australian Telstra ROM (2.31.841.6) seem to work. Can't seem to find one ANYWHERE?
This is driving me CRAZY.
Is there any OTHER way of doing a hard reset (eg while connected to PC?)
PS Oddly enough, it seems that while the phone is connected to the usb port of the PC, it DOESN'T try to power off! - Whoops, cancel that... "Power Off" dialog just came up!