Related
This tweak doesn't have anything to do with the registry or anything remotely technical so don't worry about applying it it will take less time to do than to read this post!
If you think you Diamond's ringing time before it goes to voicemail is too short then you can do this to lengthen it.
It don't know if this works on all networks at least I know it works on Orange UK.
Go to phone type the following.
**61*07973100123*11*30#
Press call...wait for a confirmation....done!
I'll explain a little more, this should work on all networks and is not a "Diamond" specific tweak, it just tells the network's system to let your phone to ring longer for the person calling you before it goes to voicemail, or the "This person cannot take your call message".
The important thing is the middle part.
After the **61* part is the number for your network provider's voicemail service, in my case on Orange UK it's 07973100123, please check with your network provider what this may be, they may call the number the "access you voicemail from abroad or any other phone" number.
The *11*30# part tells the system how many seconds to ring for, this can be anything between 10 and 30 seconds in 5 second increments. - 10, 15, 20 and so on...
Please let me know if this works on other UK providers, and re-post with your findings, i.e. what the voicemail access number is for each one.
How to check if it worked? Phone yourself and see how long it rings for!
Happy Days!
.G.
Edit 23:51 12/08/2008:- It won't work with the short code for the voicemail.
i.e. the 123, 901, 171 numbers - it had to be the full version. Again from an Orange handset the voicemail number is *Hotkey 1 or 123, To listen to
voice mail from another phone is 07973100123.
Heh, Sweden Tele2/Comviq it's **61*46252(voicemail number (in my case 222))**30#
Just tried it but using 901 (for o2) instead of the Orange voicemail number.
Haven't tested it but it did say 'Succeeded' in a notification bubble so it must've done something right.
Sherby said:
Just tried it but using 901 (for o2) instead of the Orange voicemail number.
Haven't tested it but it did say 'Succeeded' in a notification bubble so it must've done something right.
Click to expand...
Click to collapse
Phone yourself and see!
Jersey
Doesn't work on Jersey Telecom 171
Wow thats an old one I remember that from about 10 year ago when some nokias had the menu option to divert for 10,20 or 30 seconds in a menu...
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
Didn't even that was there!
.G.
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
Done...changed from 20 to 30. It's the Call Forwarding option.
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
Thanks, have been looking for that, but gave up and checked my providers site
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
I know this function too
But is it possible to aplly this setting with a registry key?
THX!
ZeuBug said:
I know this function too
But is it possible to aplly this setting with a registry key?
THX!
Click to expand...
Click to collapse
Sure my Friend:
HKEY_CURRENT_USER/ControlPanel/PhoneCallFwd/DelaySeconds
It's a Dword Value, so put your value! (20 for 20 seconds,25 for 25...)
Guess by the age of this thread it may have been solved elsewhere, but having recently come across this problem and tried the **61* and settings\phone\service\-no settings- and the reg hack would like to solve this as well.
Not sure why I don't have no 'service, listed under settings\phone\service?
I have an htc diamond with a t-mobile sim if it helps?
Brilliant ! Worked a treat (**61*XXXXX ...) Thanks a mil !
great info
NisseDILLIGAF said:
Or you could just change it in the phone
Go Start->Settings->Phone->Services and ( don't know what's it called in english ) menu option ... then press 'get settings'.
Chose 5,10,15,20,25 or 30 seconds...
Click to expand...
Click to collapse
this has now sorted it so i have abit more time to get to the phone 10/10
am I doomed ?
None of the above methods worked.
Tried
- calling **61*+33610061766*11*30# (for french SFR) : msgbox says "Opération réussie" apparently, OK
- Nisse's method (Start->Settings->Phone->Services) keeps displaying 20s after I change it to 30s, close the settings and try again
- ZeuBug's : Registry key HKEY_CURRENT_USER/ControlPanel/PhoneCallFwd/DelaySeconds surprisingly displays "30" as value
- have soft reset the phone a couple of times,
but, whatever I do
- the settings always display "20 s"
- the call rings no more than 3 times,which is never enough to pull it out of tight jeans pocket! (no, solution is not to use a handbag, thanx)
Any idea if an other setting somewhere might be blocking or overriding this one?
____________________
16/09/2009 : After controlling with HTC tech support + operator (french SFR) tech support, the problem lies with the operator: SFR does not allow changing this setting!!!!!
Apparently, french Orange users can't either? (to be confirmed by Orange users)
just for those with same problem, initial ring delay can be turned down with :
http://forum.xda-developers.com/showthread.php?p=894882#post894882
The wm5_ringdelay_patch_normal-v1.2.zip contains a cab which does turn down the inital delay so I now get 4 rings instead of 3 before transfer to voicemail.
Great thanx to Tuatara
Unmask private number. This is a great service, and it's FREE!
https://www.trapcall.com/
My YouTube video of it.
http://www.youtube.com/watch?v=QGDO3cwsz4I
See comment on youtube
Edit: just trying to help bro, no need to go all defensive.
Seriously, either smudge those nubers out, or remove the video. Somebody's mom is going to get a ton of calls, or a new phone number very soon.
his mom sounds hot!
to bad it won't work for us Europe guys
That is hot, tried it and it works...........
l3it3r said:
See comment on youtube
Edit: just trying to help bro, no need to go all defensive.
Click to expand...
Click to collapse
Okay, thanks for the concern. Uggh, I'm a dumb*ss for doing that. Sorry about that. Video is now fixed.
lmao cool stuff
Xtreme XL said:
to bad it won't work for us Europe guys
Click to expand...
Click to collapse
Did you try it?
And Kevin Mitnick participate to the software conception
Wow this really does work! Tried it on my att Fuze and after a bit of configuration it unblocks it all. It asks for you voice mail number though, i don't know why though. It also changes all of your call forwarding numbers to theirs rather than your default voice mail number. People calling you still go to your voice mail like normal though, maybe that is why they need your voice mail number in the beginning.
can someone help me out? i cant seem to get this to work, i get the blocked calls and all but i cant access my voicemail what number do i need to set as my voicemail number that i call to get my messages?
im on tmobile USA in california
edit*** i got it to work
Im in the UK so cant try this, but just a thought.. you should combine this service with this thread to make it all automatic!
http://forum.xda-developers.com/showthread.php?t=451309
great tool, soon my phone can do anything
i used to use this all the time before...
its always been here, the only new concept here is its available to everyone!!
once anyone calls an 800 number with a private number it automaticly gets unblocked (its the law) and then trap calls just forwards the call back to u!
u can do it on ur own all u need is an 800 number with a cheap plan!
under phone settings u need to set condintional forwarding for busy to ur 800 number, then forward ur 800 number back to u!
the only downside is u have to let the phone ring through if u want it to go to voicemail.
(u can mute it)
is there anyway to use this feature and also integrate it with YouMail? i really love YouMail and all the features they give for free!
eboy44 said:
is there anyway to use this feature and also integrate it with YouMail? i really love YouMail and all the features they give for free!
Click to expand...
Click to collapse
Yes I have youmail as well, so I played with the setting......
all you have to do is......on the trapcall setting when it tell you to put the phone number that you see on your phone "That is you carrier voicemail" instead of putting that phone number in, you put the youmail phone number (17142043114)...........That is all you have to do.
gsessons said:
Yes I have youmail as well, so I played with the setting......
all you have to do is......on the trapcall setting when it tell you to put the phone number that you see on your phone "That is you carrier voicemail" instead of putting that phone number in, you put the youmail phone number (17142043114)...........That is all you have to do.
Click to expand...
Click to collapse
do i make that change on my phones settings or on the trapcall setting online?
wish i cud get this to work here in the caribbean
eboy44 said:
do i make that change on my phones settings or on the trapcall setting online?
Click to expand...
Click to collapse
You do it the Trapcall settings
Where you put the forwarding number that is where you put the youmail number
1. Sign in to your Trapcall account (on computer)
2. now go to the settings tab and under that select My Phone
3. under Phone Overview click carrier edit
4. select your carrier and the click update
5. When it say "We Need More Information!" there will be a box asking for a forwarding number, put in the youmail number
"17142043114" click I'm Done
6. Under Program Phone you will see where you have to dail the number on you phone (*004*18669676590*11# and hit SEND) after that click
I did this.
That should of work............ Enjoy unblocking people
The new SuperROM 3 adds 'Mobile Location Reporting' to the already tried and tested SuperROM Version 2.3.
This advanced feature will enable you to locate your Jade if ever lost or stolen and is built into the ROM so it even survives a hard reset. Simply send an SMS to your Jade with your secret password and it will reply with a location report.
If a new SIM card is put in the device it will send an SMS message to the pre-programmed number informing you of the new phone number and IMSI number of the new SIM.
This is a new application written especially for the Jade and is exclusive to the SuperROM. It adds no overhead to the device and is only activated when a message is received with your password and for a few seconds when your device is restarted. Written in C++, the tiny code requires no .NET framework and adds no extra size to the ROM.
I have been testing this new feature for the last four weeks and it works very well. Please leave your comments both positive and negative to allow me to refine/improve the 'Mobile Location Reporting' feature.
Full intructions are included in the README file.
http://rapidshare.com/files/223351030/JADEMAN_SuperROM_v3.0.rar
http://www.mediafire.com/file/jom5mddnzzo/JADEMAN_SuperROM_v3.0.rar
Wow that's nice jademan.... will it interfere with guardmobile which i would like to install?? it has few more options like callback etc?
and does this mobile location reporting program survive hard reset??... meaning, if the intelligent thief hard resets my phone and then insert his sim, would it work and send a sms to a predefined no?? (too much, i know )
Anyway thanks for this too
Thank god i din flash the superrom ver 2.3.. i can straightaway go to ver 3
Even though this is UK-Eng, I shouldn't worry about anything if I were to install this on USA right?
^ yeh nth to worry... jademan already answered that in the 2.3 superrom thread
Hi Jademan,
can you cook an German Version of your Super-Rom?
My first comment to the new feature in your SuperROM v.3:
Affter flashing i don't get any SMS from 'Mobile Location Reporting'.
If i send a SMS with "my-password" i get an SMS back with Carrier, CellID, LAC, MNC, MCC, RSS and "GPS failed to get a position fix." (no GPS in the house )
This tool looks to be very good, but if the 'Mobile Location Reporting' does not working on SIM-Card changing it's only half so good...
Dark Angel [gEb] said:
My first comment to the new feature in your SuperROM v.3:
Affter flashing i don't get any SMS from 'Mobile Location Reporting'.
If i send a SMS with "my-password" i get an SMS back with Carrier, CellID, LAC, MNC, MCC, RSS and "GPS failed to get a position fix." (no GPS in the house )
This tool looks to be very good, but if the 'Mobile Location Reporting' does not working on SIM-Card changing it's only half so good...
Click to expand...
Click to collapse
Thanks for the comment.
Even with just the CellID you may get an idea where it is (http://www.opencellid.org/). Google Maps uses this info to find you when it can't use a GPS fix. I can usually get a fix indoors but it can take a while, the default timeout is 5 mins but you can try PASSWORD:30 to give it 30 mins to get a fix.
The SIM change reporting should work, did you tick the box and enter the phone number you want the reports sent to in international format?
Jademan said:
The SIM change reporting should work, did you tick the box and enter the phone number you want the reports sent to in international format?
Click to expand...
Click to collapse
Thanks for the Answer.
Yes, i did it. On SMS from other Phone i get answer, but i missed the first SMS after flashig to your ROM.
Raghav_K said:
Wow that's nice jademan.... will it interfere with guardmobile which i would like to install?? it has few more options like callback etc?
and does this mobile location reporting program survive hard reset??... meaning, if the intelligent thief hard resets my phone and then insert his sim, would it work and send a sms to a predefined no?? (too much, i know )
Anyway thanks for this too
Thank god i din flash the superrom ver 2.3.. i can straightaway go to ver 3
Click to expand...
Click to collapse
Not sure about Guardmobile but they should work together, although Gaurdmobile won't survive a hard reset. If you want more features in 'Mobile Location Reporting' then ask here and I'll consider adding them.
Yes it does survive a hard reset as it's built into the ROM but the SIM reporting feature needs testing more. Please try it and leave your comments.
Dark Angel [gEb] said:
Thanks for the Answer.
Yes, i did it. On SMS from other Phone i get answer, but i missed the first SMS after flashig to your ROM.
Click to expand...
Click to collapse
Look in your Windows folder for a program called simon.exe, double click it and it should send a SIM change report to the pre-programmed number. It should only do this if it hasn't sent one already. Can you check this please?
Jademan said:
Can you check this please?
Click to expand...
Click to collapse
One moment please, i must flash your rom to my jade, because i need the german version and have reflashed chanevs rom affter the first Test with your SuperROM.
Jademan said:
Yes it does survive a hard reset as it's built into the ROM but the SIM reporting feature needs testing more. Please try it and leave your comments.
Click to expand...
Click to collapse
Cool.. will try for sure am flashing oly aftr 2 days oly cos am gonna be busy for 2 days.. will report as soon as i test
O.K. :
1. Image flashed. No SMS on my second Phone.
2. SMS with Password to my Jade, after many minutes i got an answer with all data (gps data too).
3. On Jade "run" the \Windows\simon.exe: Nothing. No SMS to pre-programed number.
Dark Angel [gEb] said:
O.K. :
1. Image flashed. No SMS on my second Phone.
2. SMS with Password to my Jade, after many minutes i got an answer with all data (gps data too).
3. On Jade "run" the \Windows\simon.exe: Nothing. No SMS to pre-programed number.
Click to expand...
Click to collapse
Thanks, I have a German SuperROM on my device right now, will upload tonight
Can you send me two files, _sim.bin and __sim.bin from your windows folder? I'll PM you with my email.
Dear Mr Jademan... Is This Jademan SuperROM V3 Works On Asia Device ?
^ it does
Hello,
I installed the firmware to my Jade, no SMS was sent to the predefined phone nr, the format was the right one, international (+4...)
I sent from the phone (with the predefined phone nr. saved in jade's firmware) a SMS with the password to my phone but there was no SMS sent back to the other phone.
Do I need to check anything to make this function work?
thanks!
ccris said:
Hello,
I installed the firmware to my Jade, no SMS was sent to the predefined phone nr, the format was the right one, international (+4...)
I sent from the phone (with the predefined phone nr. saved in jade's firmware) a SMS with the password to my phone but there was no SMS sent back to the other phone.
Do I need to check anything to make this function work?
thanks!
Click to expand...
Click to collapse
Can you send an SMS from Jade, i.e. you have credit, etc.?
The password is case sensitive, i.e. abcde != Abcde and nothing after the password?
Did your Jade receive the SMS?
The SMS can be sent from any phone and reply goes to the phone that sent it. Pre-programmed number is only for notication of SIM changes.
net 3.5??
hey jademan, why don't you put net3.5 in to your perfectRom??? it would be great if you do so.
You are genius! Thanks for the tool.
Hi Group.
Just got a touch diamond, my first smart phone so bear with me,I have a question,how do I find where to change
control over sending out my own number or not ,
TYIA
start-settings-phone-services-caller ID-Get Settings.
You will be prompted for your choice of 3 options:
everyone
noboby
only to contacts
Well That was fast.Thank you so much,Now while you are there,I also have found that if I receive a text from someone not in my contact list,The only way I seem to be able to add them to my contact list is to dial their number and hang up quick, and then I have the option to add it,I bet you know better
Later
highspark said:
Well That was fast.Thank you so much,Now while you are there,I also have found that if I receive a text from someone not in my contact list,The only way I seem to be able to add them to my contact list is to dial their number and hang up quick, and then I have the option to add it,I bet you know better
Later
Click to expand...
Click to collapse
Not entirely sure of the exact details but if you open the txt message and press and hold on the number you should get an option to save that number to contacts.
Hi
Well thanks again,I am sure I did that, which is what made it start to dial, will try it next time to see if it was finger trouble my end
Tis a nice handset,I am fine with windows,just need to get to know the touch screen system better,
Many thanks for your help,seems I have a lot of reading ahead
Later
Hi,
For starters, please excuse me for the title - I really don't know how to formulate this and it might be the reason why Google couldn't help me this time.
Everyone in our team uses a Galaxy Note II - and one of them has the following problem :
When we get a text message indicating someone left us a voicemail message, we get a number of 5 to 6 digits (5555xx, where xx is the following number of that message in your mailbox). He's the only one who doesn't get that number as a touchable link that would immediately open the dialer and allow you to call that number.
I checked if it worked when you send him a text message with an actual complete phone number - and that works well. If anyone of us gets a text message with in it a succession of numbers - the numbers are always shown as link, regardless of it being a phone number or not. But not him.
I couldn't find a specific option for that in the settings. I don't think anyone of us did anything special to get that behavior.
Is this clear enough ? Can someone help with this ?
Thanks in advance.
Greetings,
Mike
You should post in the Note 2 forum and try again.
Note 1 here
ThaiDai said:
You should post in the Note 2 forum and try again.
Note 1 here
Click to expand...
Click to collapse
Oh... ok... doing it now.
Thanks.