Database Develop

Req: .cab that adds individual "New SMS" sounds based on who sent

Hello,
I've been looking for about a week for a way to assign certain sounds when certain people/categories of people in my contact list send an SMS to me.
The only thing I found so was is for symbianOS (MessageTones).
Do anyone know if something equivalent exist which will run on WM6?
Thanks in advance

photocontacts pro
i use photocontacts pro...... it lets you assign ringtowns smstones by person or category or profile. There may be a free version out there somewhere but im not sure if it has all the functions.
www.pocketx.com
Jason

Thanks lots, just what I was looking for

Photo Contacts got a quirk sometimes on my TyTN II that makes SMS tones loop indefinetely. Quite annoying lol. In case anyone here knows of an alternative to add distinctive SMS sounds please post it here.

Anyone?
-Shen

Shen said:
Photo Contacts got a quirk sometimes on my TyTN II that makes SMS tones loop indefinetely. Quite annoying lol. In case anyone here knows of an alternative to add distinctive SMS sounds please post it here.
Click to expand...
Click to collapse
Pocket Ringo

athanaso77 said:
Pocket Ringo
Click to expand...
Click to collapse
Thanks, hope this one works better

ringo problem
funny, i tried ringo mobile 1.301 trial version, works good, and after a softreset, when there is a call it wont ring! the sms still rings, just the call wont ring!
anyone experiencing the same issue?
NB: i used it before with my hermes without any issue

heheh it makes me afraid to soft reset now, just installed Ringo Mobile and it works brilliant, but I haven't soft reset yet

S2U2 fullscreen caller photo problem

Hi all, does anyone know how to fix the problem that when there is an incoming call, the S2U2 brings out a very low res, atually just an enlarged version of the small thumbnail, rather than the full hi-res (240x320px) image of the person calling?
also how do i totally disable S2U2 ?
thanks in advance

If you read the F.A.Q for S2U2 you would have found your answer.
Just use S2V to assign pictures for your contacts. Only downfall about that is it won't sync to Outlook. If you want to disable S2U2, you can disable that in settings and keep the caller id function.

phouki said:
If you read the F.A.Q for S2U2 you would have found your answer.
Just use S2V to assign pictures for your contacts. Only downfall about that is it won't sync to Outlook. If you want to disable S2U2, you can disable that in settings and keep the caller id function.
Click to expand...
Click to collapse
Heres a cab
Enjoy

by any chance could any one provide the latest version of the s2u2 cab

ChInEsE ChIcKeN said:
by any chance could any one provide the latest version of the s2u2 cab
Click to expand...
Click to collapse
there u go. try a search next time.

thank you so much
does this version have problems like the previous versions?

ChInEsE ChIcKeN said:
thank you so much
does this version have problems like the previous versions?
Click to expand...
Click to collapse
I don't know what "problems" your referring to, but I'm using this with S2U2 for fullscreen caller display and it's working perfectly.
try it, if you dont like it , uninstall...

i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?

Thanks i'll give it a try

S2U2 is now at v1.00
http://forum.xda-developers.com/showthread.php?t=381588
Download this version.

S2U2 Caller ID
ChInEsE ChIcKeN said:
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Click to expand...
Click to collapse
1. Check out the threads on S2U2.
2. Crop/edit your photos to the right size.
3. Use S2V to add your new photos to contacts.

ChInEsE ChIcKeN said:
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Click to expand...
Click to collapse
Chicken,
I believe I am experiencing the same problem. When I get a call, the S2U2 caller ID comes up and then the standard Windows Mobile ID comes up and overlays it. Is there anyway to stop the windows mobile ID?
I am on WM6.1 on a HTC Touch. I am running S2U2 V2.10 by A_C
Thanks in advance.

SMS iPhone Style for Pocket PC

Friends,
Scoured the internet and looking for a third party app that will display SMS messages like the apple iPhone when received?
If there are any apps out there, please advise.
Thank You,
Tvos

pocketcm, vito sms, winmo 6.1 to name a few

bapssystupr3m3 said:
pocketcm, vito sms, winmo 6.1 to name a few
Click to expand...
Click to collapse
I use pocketcm, love the program but never paid attention to SMS feature...
I noticed with the iPhone the message auto pop-up on the screen in a message window displayed nicely. How could I have this feature?
Please advise.
Tvos

vito sms..why not search around for such programs?

iv had a look at these as well, but non of them seem quite as well made as the ipod slide plugin, is there any more like the ipod sms?
thanks rodney

Just buy an iphone

captainsensible2002 said:
Just buy an iphone
Click to expand...
Click to collapse
+1 on this

antihrist said:
+1 on this
Click to expand...
Click to collapse
make that +2

Mayby is any skin for wm.6.1 orginal sms chat?

not being funny but the iphone in my eyes are not as good at the tytn ii so im not gonna go for that, im just looking for something to make my txts easier to read, and i find the iphones text easy to read, so any luck on any ones like the iphone??

Upgrading to windows mobile 6.1 is always an option, try a 6.1 rom and it has very adequate threading.
PocketCM with the correct skin is almost indistinguishable from the iphone sms conversations.

iv just downloaded that, could you link me to the iphone theme i cant find it :/

http://forum.xda-developers.com/showthread.php?t=356092&highlight=iphone+pocketcm
page two of search "iphone pocketcm"

Ringtone Manager for WM6.1 (Diamond)

Hi there,
is there someone with a ringtone manager working?
I've already tried the last versions of mRing and Ringo, with no success.
mRing, doesn't work
Ringo, works but i can't mute incoming calls :\\
Open to suggestions, this topic can help alot of users with this issue.
Thanks all.

No one uses ringtone manager on your Diamonds??
Thanks

rockas said:
No one uses ringtone manager on your Diamonds??
Thanks
Click to expand...
Click to collapse
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers

I am using Photo Contacts Pro. This comes with Ring Manager, SMS contact rings as well as profiles.
Works well for me.

It looks interesting...
I didn't know that software...
To customize sms, it should be perfect
http://www.pocketx.net/products/photocontactspro_ppc/index.html

unvisigoth said:
I have tried either ringo and mring too. Ringo doesn't work, because put a lag beetween the received call and the ring. Often phone ringed when on the other side call was closed. Mring seems to go well. Phone rings after one ring (wm normal lag ) and I don't have had any problem....... so far.
I use original italian rom from HTC 1.37 and I've disabled phone skin using advanced config.
Cheers
Click to expand...
Click to collapse
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?

rockas said:
Your Diamond work well with mRing??
What version? does the mRing initial screen appears normal?
With mRing, mine don't even ring
could it be because of phone skin?
Click to expand...
Click to collapse
Yes it does. My version is 4.03. The inital screen seems a little bit confused but it seems work well. Try do disable phone skin and try mring again. Disabling phone skin you gain about 10 MB of free ram. If you like the skin that comes with the diamond try to disable it and use S2U2. It's better, lighter, and with a lot of settings.
Cheers

where can i get S2U2?
http://forum.xda-developers.com/showthread.php?t=381588
thanks for the help

I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers

Problems with Photocontacts Pro with Diamond
biggggant said:
I am having issues with Photo Contracts Pro and my Sprint Diamond. When I hit answer the ringtone starts to stutter and the call takes a few more seconds beofre it answers
Click to expand...
Click to collapse
Hi! Also I have , not one but a lot of issues with the Photo contacts Pro in my Diamond. I really thing that it does not work with that device.
First I installed the last version 5.09 and had a lot of problems (rings, answering the calls, Extended menus of the Today's Plug-in,.....). Wit the older version 5.08 it seems that works a little better, but the Today's plug-in has some very big text, wich make the Today's Screen a real mess.
Best regards!

Simplest One
Use this freeware to add custom ringtones to contacts/ categories etc.

mine had stopped working after a soft reset following changing the registry location to the sd card so am very pleased to have found such a small app that assigns individual tones to contacts, thankyou

Diamond Caller Tab for TYTN?

Hi to all,
I was wondering if it is possible to extract from diamond rom the application that shows the tab with large buttons and name with an incoming call.
I am using Photoexplorer pro but I am not fully satisfied, S2U also seems to be the same.
I think the diamonds one is the one I need, simple and usefull.
Is it possible?
thanks to all
fausto

fcasini said:
Hi to all,
I was wondering if it is possible to extract from diamond rom the application that shows the tab with large buttons and name with an incoming call.
I am using Photoexplorer pro but I am not fully satisfied, S2U also seems to be the same.
I think the diamonds one is the one I need, simple and usefull.
Is it possible?
thanks to all
fausto
Click to expand...
Click to collapse
Try this - It's very nice yes. Only problem is no video calling or smartdial.
http://forum.xda-developers.com/showthread.php?t=395086
When you make & receive a call it is much nicer looking than default too.

snachez said:
Try this - It's very nice yes. Only problem is no video calling or smartdial.
http://forum.xda-developers.com/showthread.php?t=395086
When you make & receive a call it is much nicer looking than default too.
Click to expand...
Click to collapse
hi Snackez and thanks for the usefull link. Btw, I have installed and tried various solutions showed in all the threads but I have not still found what I am looking for.
Someone has not video, other without smartdialing, other with graphiic's bugs and so on...
It is really strabge that company like SPbSoftware or others has not yet implemented this function inside their applications.
thanks however, now I know other place to look for other info.
have a nice day and sorry for bad english.
fausto