I have had a search around, but cannot find anything useful, I hope someone can help me, this is my only problem with the Diamond now!
Sometimes after the phone goes to sleep, it does not wake up properly. I have the phone set to switch the screen off after a delay and to autolock at that point as well. All has been fine with that except in the last few days sometimes when I try and bring the phone out of this sleep mode, it doesnt work.
Geneally I will press the centre button and the phone comes to life and I tap unlock and I am away. However, sometimes now only the top bar where the start button is will appear. The HW buttons light up, but the rest of the screen does not come to life and whatever I do, I cannot get it to come back. I can press the power button and it will go to sleep again and then when I try and wake it, exactly the same problem occurs. Only a soft reset will solve it - far from ideal.
Can anyone help please?
Related
Well I've had my Tilt for a week now and I have been frustrated completely with the Phone App.
First of all, when I am calling a tone prompted location where you have to press the keys to get somewhere (611, corporate voicemail, etc), some of the time the phone will go into "hold" when i press the keys.
Secondly, after a call that i have pressed the keys for tone operation, the phone app will not completely close. the screen will stay half dim and the start bar and task panes are locked out. i can't access any of the icons at the top of the screen. the only button available is the task manager which shows no programs running.
i can pretty much replicate the 2nd problem consistently. does anyone else have this problem? Please try to call into a company say even 611, go through all the tone prompts and see if the phone app closes appropriately afterwards. make sure you are on the phone long enough for the screen to automatically dim.
the only way for me to get past this is to softboot so i can get access to the start menu again. but i'd rather not have to softboot after every phone call =T
Thanks!
Same problem here, any help would be great.
Massiv
disable the lock thing where you have to enter a pin - i think its a bug in the rom
Same problem - but if press the on/off button for the screen twice I do have again access to all icons. Not nice but ....
yeah i was messing around with the phone last night and realized that it has to do with phone lock and figured out if you press the power button to put it to sleep and press it again to wake it up, everything is normal again. it was just a fluke how i found out but i'm glad to know that this isn't only my problem. i was about to do another hard reset on the phone.
i called ATT techsupport and they told me it might be the simcard. can other Tilt owners chime in here. is this a ROM problem or could it be related to a faulty sim?
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
The screen keeps blinking back to full brightness, every 30 seconds or so, when it is left alone and the screen dims normally. It is as if something is pressing a button or touching the screen.
When I press the power button and send it to suspend mode, the backlight goes off, and the tilt no longer responds to touch or button pressing. For some reason it pops itself out of suspend and turns back on every couple minutes. My battery life is going down extremely fast. 100% to 40% in three hours.
Any help would be greatly appreciated. I searched the forum but never found a specific topic for this issue.
MiniDevil said:
The screen keeps blinking back to full brightness, every 30 seconds or so, when it is left alone and the screen dims normally. It is as if something is pressing a button or touching the screen.
When I press the power button and send it to suspend mode, the backlight goes off, and the tilt no longer responds to touch down extremely fast. 100% to 40% in three hours.
Any help would be greatly
appreciated. I searched the forum
but never found a specific topic for
this issue.
Click to expand...
Click to collapse
I have the same problem w
th the backlight comming on by itself & battery life depletes extremely fast. I am using HD 15 Nov with 3.29.
In addition to backlight issue my hardware keys are no longer working.
Please has anyone got any advice
i have the same problem. the only thing that seems to work is doing the keypad lock and putting it to sleep. it will occasionally blink like its trying to come back on but doesnt. another thing i did is put my phone in flight mode, locking the keypad and putting it to sleep. when i do that it doesnt blink or anything. sadly i wont receive phone calls or emails and texts. i think the blinking has something to do with phone signal and accessing the networks.
hth
also i noticed that it wakes from sleep when the keypad "unlock" screen pops up.
i think i found a fix
Ok I hope this helps for you because it seems to work for me. I first went to start/settings/sounds & notifications. Then I clicked on the notification tab and unchecked everything leaving only the ringer on for when calls come in. when I did that, for about 5 minutes (longest I tested it at) the phone did not turn on and the backlight didn’t do that weird grayish flash thing. Afterwords I at first was going to go down the list of all notifications and turn things on/off to see what wakes up my phone but i got too lazy and only checked one setting. One thing I noticed is that when I have the beam: autorecieved notification turned on for display a message on the screen I get that weird backlight flickering thing. So for now I just have sound alerts on when I receive any type of messages and a sound alert for reminders. So far so good, my phone hasn’t woken from sleep in 20 minutes.
Hi, I am starting a new thread with this issue, because my friend Google couldn't help me much and I hope that maybe somebody would know the answer.
Is there any software to suspend the device and to turn it back on immediately (all into one link, to switch off, then back on, automatically)?
This would be good for re-activating the swipe areas when using Touch Lock Pro, when they loose their receptivity (it happens occasionally). For right now, the solution I have is to press the power button twice, once to suspend, and secondly, to bring the screen back on.
If I had a software to do automatically both moves, with one click on the screen (so the screen would turn off and on again), that would make it much more easy, and no need to overuse the hard button.
thank you very much for any suggestion
Hello,
I was wondering if there is some way to track what is happening on my phone? Since my screen stops working when waked up from standby. i.e. if i press the button at the top to standby and then when i press it again and reach the lock screen the touchscreen is not working, it is simply not registering touch and neither are the 4 small buttons on the bottom (back, settings, home, search). However, the OS in itself is still running as I think since I can still see the time move and if I hold the off button the menu comes up for reboot etc.
Anyone heard of anything like this or any tips how to solve this? I am rooted and running CM6 I think at the moment.
Thank you,
Svarto
Svarto said:
Hello,
I was wondering if there is some way to track what is happening on my phone? Since my screen stops working when waked up from standby. i.e. if i press the button at the top to standby and then when i press it again and reach the lock screen the touchscreen is not working, it is simply not registering touch and neither are the 4 small buttons on the bottom (back, settings, home, search). However, the OS in itself is still running as I think since I can still see the time move and if I hold the off button the menu comes up for reboot etc.
Anyone heard of anything like this or any tips how to solve this? I am rooted and running CM6 I think at the moment.
Thank you,
Svarto
Click to expand...
Click to collapse
so the only way to escape this is by pulling the battery and rebooting? when you do reboot and dont go in standby, the touchscreen works fine?
You can check the issue using logcat and /proc/kmsg.
Also, you can read my threads on the subject, describing the same error with logs, and see if your logs are the same.
I'm currently trying to check if the error repeats itself after full wipe and starting from scratch. In the meantime it didn't show up until I applied a theme, and then after reflashing the ROM it's gone again - I'm still checking, only a day has passed.
Yes, the only solution is to pull out the battery and reboot. Then it works fine and I can go in and out of standby. I havent found a particular pattern to it happening so it is hard to reproduce.
I will have a look at that logcat and your other thread!
Just to guide you - when it happens to me, the phone gets stuck with mmc0 access that receives "CRC error" reply and doesn't go through. Pressing power button for a long time several times and playing with trackball / touching the screen between presses "releases" the "lock", and you'll be able to work with the phone again until you put it to sleep again. If you turn WiFi and BT off and then back on - the problem seems to disappear.
Hi there,
My Home button press function (mechanical) having some bad contacts and every minutes my phone xiaomi mi5 awakes from sleep mode, lowering my battery life.
Today it s even worse, it closes the app i using for returning to the home screen.
I wish to find a way to completely disable the press home button mechanical function, the fingerprint recon is ok, and the touch home button too.
I hope some of you will find a way to resolve my issue.
Thx.
same problem since last 2 months
if anyone can suggest some solution, it would be really helpful.
flash RR.Enable software keys and disable hardware keys on customization menu on settings
The problem resolved by itself, it must been some moisture that was stuck in it.
About weeks later it s now so fully functional.