Has anyone been able to do this?
Alternatively can you guys point me to a ROM for the Treo that is based on the ATT release like the ones VP3G has generously/geniusly created for the Hermes/8525?
Thanks!
Uri
Bump?
anyone? Bueller?
http://forum.xda-developers.com/search.php?searchid=9449680
Link goes nowhere...
Here you go
HTC HOME
TOUCHFLO
all in one package, dont forget FLASH you will need that as well.
http://forum.xda-developers.com/showthread.php?t=354715&highlight=adobe
Hi, I'm a newbie hear,
I just got my AT&T Tilt and I want to know how can I change the default AT&T Tilt screen to the original HTC Kaiser Screen that look like the pic attach.
Thanks
You need to get HTC Home - www.pocketemu.com.
Or you can flash your it and get everything to look like the HTC device =]
If you look around on this forum, there are copies of HTC Home. If you can't find it, PM me.
Hello,
I have installed Zombienexus dialpad from here:
http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
You see can how it look? The problem is that the buttons from original HTC diaplad are befonet his dialapad and Zombienexus dialpas is under. It looks like mixed two dialpad. Anybody has installed this diaplad too? Is it working in your Kaiser?
Anybody can help me?
So, perhaps anyone can try?
I can't believe that no one tried this dialer on HTC Kaiser...
Hello all,
For Canadian Rogers/FIDO subscribers, like myself, Name display on non- rogers or Fido phone does not work. However, with the help of pandaboyy and others, they were able to get it working on the Diamond1 and Touchpro1. Please see:
http://forum.xda-developers.com/showthread.php?p=3099452#post3099452
I would love to get Name display working on my new diamond2, I have talked to pandaboyy and because he doesn't have the diamond2, he was not able to help me.
My suggestion is: I would appreciate any chef cooking for the D2 to implement their method to get the name display to work. This would help all Canadian susbcribers like myself.
Thank you very much... Looking to get the name display working!!!!
Getting Name Display to Work [bounty available]
Hello all,
For Canadian Rogers/FIDO subscribers, like myself, Name display on non- rogers or Fido phones does not work. However, with the help of pandaboyy and others, they were able to get it working on the Diamond1 and Touchpro1. (a detailed instructions for chefs to implement it is already available in the link below):
http://forum.xda-developers.com/showthread.php?p=3099452#post3099452
I would love to get Name display working on my new diamond2, I have talked to pandaboyy and because he doesn't have the diamond2, he was not able to help me. However, he is welling to help any person...
My suggestion is: I would appreciate any chef cooking for the D2 to implement their method to get the name display to work. This would help all Canadian subscribers like myself.
Thank you very much... Looking to get the name display working!!!!
I'll be more then happy to contribute 30 US dollars via paypal who ever gets a CAB working. other people are welcome to contribute money wise.
how can I get someone to help me with it? I'd really appreciate any help...
thanks
Check my profile , contact me with msn
I will try to help
Cheers..!
Try using this .CAB. It should be universal for most HTC-based WinMo 6 devices, as it works on my Xperia.
Hope that helps!
It did not work :'(
would anyone know why?
thanks
iamcanadian said:
It did not work :'(
would anyone know why?
thanks
Click to expand...
Click to collapse
The only way we could get this to work on a Topaz or a Rhodium is for Rogers to release one of the devices. Name display worked on the Diamond, Raphael and Xperia because Rogers released a Rogers-branded Diamond, and the rilphone.dll from the stock Rogers ROM was used to get CNAP to work in all Diamond, Raphael and Xperia ROM's. However, the despite having most of the same hardware (processor, memory, etc.) specs, the Rhodium and the Topaz are different and that's why the rilphone.dll from the Rogers Diamond ROM won't work in them.
Rogers Name Display worked on Tilt2
efrant said:
The only way we could get this to work on a Topaz or a Rhodium is for Rogers to release one of the devices. Name display worked on the Diamond, Raphael and Xperia because Rogers released a Rogers-branded Diamond, and the rilphone.dll from the stock Rogers ROM was used to get CNAP to work in all Diamond, Raphael and Xperia ROM's. However, the despite having most of the same hardware (processor, memory, etc.) specs, the Rhodium and the Topaz are different and that's why the rilphone.dll from the Rogers Diamond ROM won't work in them.
Click to expand...
Click to collapse
I am running LEO CELL EVO 4 Rom on my Tilt2. SO i gave the Rogers Name Display cab link above (under scar45 post) worked on my Tilt 2. Well not 100%. It works flawlessly with WM Phone dialer skin. However with HTC Sense Phone skin, during the incoming call it only shows the number however as soon as you answer it, the name shows up. it also shows up under the call logs. SO i am guessing for the HTC Phone dialer it must have something to do with the resolution of the phone canvas? any ideas anyone?
the rilphone.dll in the cab works with the tilt2. battery drain is normal with other rilphone.dll. it did not brick my phone. I will experiment more and let u guys know
shinku said:
I am running LEO CELL EVO 4 Rom on my Tilt2. SO i gave the Rogers Name Display cab link above (under scar45 post) worked on my Tilt 2. Well not 100%. It works flawlessly with WM Phone dialer skin. However with HTC Sense Phone skin, during the incoming call it only shows the number however as soon as you answer it, the name shows up. it also shows up under the call logs. SO i am guessing for the HTC Phone dialer it must have something to do with the resolution of the phone canvas? any ideas anyone?
the rilphone.dll in the cab works with the tilt2. battery drain is normal with other rilphone.dll. it did not brick my phone. I will experiment more and let u guys know
Click to expand...
Click to collapse
Well, I did the same thing you did, and I get the same results. Strange that the name is displayed in Sense only after you answer the call...
Hopefully someone will be able to figure it out.
Hi there,
Just another Canadian Rogers customer who would love to have name display on my HD2...any advice would be appreciated.
Cheers.
mhtoto said:
Hi there,
Just another Canadian Rogers customer who would love to have name display on my HD2...any advice would be appreciated.
Cheers.
Click to expand...
Click to collapse
So far no one has gotten it to work properly using an HTC dialer. If you don't mind using the WM dialer, then it works just fine.
Thanks, I did get it working with WM Dialer.
For other noobs, here is how to switch from HTC to WM dialer:
/forum.xda-developers.com/showthread.php?t=364297[/url]
And how to get to the registry:
/forum.xda-developers.com/showthread.php?t=475141[/url]
[just put the http:/ at the beginning of the links above, because I'm new I cannot post full links]
Then run the .cab file posted in this thread.
cheers.
Hello
I am not sure if this is the right thead since my phone is a chinese cloned one... but I hope you guys can help me out.
I know there are some T5353 with a (+) or (-) sign at the end. Mine just has T5353 written down on the back without any sign.
It has wm6.1 installed and the keypad is the very tiny one that comes with the standard rom. I would like to have bigger keys. After browsing for a while I found a CAB with the original keypad for the Topaz. I got it installed but man... it was HUGE!! I was only able to see a couple keys taking up the whole screen.... so I ended up uninstalling it. I have a WQVGA 400x240 screen.
Is there a cab or a way to change it? make it easier to type?
Any help is much appreciated.
Thanks!
anyone please?