Hello
I am not sure if this is the right thead since my phone is a chinese cloned one... but I hope you guys can help me out.
I know there are some T5353 with a (+) or (-) sign at the end. Mine just has T5353 written down on the back without any sign.
It has wm6.1 installed and the keypad is the very tiny one that comes with the standard rom. I would like to have bigger keys. After browsing for a while I found a CAB with the original keypad for the Topaz. I got it installed but man... it was HUGE!! I was only able to see a couple keys taking up the whole screen.... so I ended up uninstalling it. I have a WQVGA 400x240 screen.
Is there a cab or a way to change it? make it easier to type?
Any help is much appreciated.
Thanks!
anyone please?
Related
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Hi All, first post on a great forum... pity its due to a problem!
My Diamonds virtual keyboard has been blacked out, no matter what I do, if I change the input method etc, it still pops out to input text, but I cant see any of the keys, its all black. If you press blindly it inputs, but it doesnt help me not being able to see the actual keys lol
Its rom version 1.93 and ive got the Core DivX player and Garmin XT installed. Thats about it... Any help is appreciated!
I have recently updated to a fairly stripped down ROM (it only included the bog standard Keyboard thts way too small to use with finger).
I really like the HTC Keypad as it's easy as hell to use - but I've just tried to install it by installing EZinput and its showing about half the proper resolution - I think its QVGA. This has been a problem now for about 3-4 days and I absolutely despise having to use a QWERTY keypad. Currently got SPB keyboard on it (tried Resco too but its rubbish).
Can anyone upload their original diamond keypad or even an installation cab with all the VGA keyboards in? (qwerty, phone keypad etc).
Would be a great help!
Thanks guys.
http://forum.xda-developers.com/showthread.php?t=490587/
download the keyboard of your choice (with arrow or without arrow)
That should work for you
does this have a keypad as in standard with * and # keys?
1 2 3
4 5 6
7 8 9
* 0 #
That style? Thats the one im looking for!
Thanks btw! didnt even know that site existed
This is the alternative if you want it in a keypad format
http://forum.xda-developers.com/showthread.php?t=426281
The difference between that and the previous one is there is no XT9 which is similar to T9 but with word prediction. Hope this helps
You my friend -
are the biggest legend in the world. Thats the stock VGA diamond one - and thats what I wanted!
Thank you so much.
p.s the damn no-arrows diamond2 one wont work... any idea why?
it wont let me select it :-(
Try this one: http://www.everythingdiamond.info/downloads/Savage25rcracer_TD2_K_NA.cab
That's the one that I cant select! :-(
Think I'll just need to change ROMs again.
Woooo. :-(
Just tried to install that keypad linked - wont work. Also wont uninstall.
The one with the arrows works but its damn annoying.
Recently i've noticed that when i'm using the keyboard on my fuze, the layout is totally screwed up. i'm pretty confident this is due to the immense amt. of other stuff i've put on the device. does anyone know how to put together a cab or something that will restore the original layout? thanks in advance!
I'd be willing to bet you put a version of EzInput from Rhodium on. When I did this all my top row and number pad got screwed up.
Only solution I've come across is to not use that version of EzInput.
For whoever is interested,
I made my own skin for the Swype keyboard that looks like the HTC android keyboard but its only VGA portrait. I have no clue what will happen on a non-VGA phone. In landscape it is the original Swype skin because I don't need the landscape version.
BRAND NEW DESIGN! NOW WITH 2x THE AWESOME!
After a short experience with xdandroid I'm back in Winmo. Here's what's new, I'm calling it Swype 11 due to the new year:
To-Do:
- Finish Editing page
- minor tweaks/more colour
Jan 25th UPDATE
- More colour
- Finished Calculator page and almost finished Edit page
- the ^ on the symbols page was incorrect. I was actually a period (who knew?) so I fixed that
Jan 23/11 UPDATE
- I've decided to go a more colourful route, to help differentiate the buttons
- the two number/symbol pages are now done
- minor adjustments here and there
Jan 22/11 UPDATE:
- Using the 2.0 version because of previous preference and smaller size.
- I've totally revamped the previous version
- Both letters and symbols have increased in size, the ' is still pretty hard to see though
- Only small case, shift, and caps are done so far.
- I've improved my technique so I should crank out there rest relatively soon.
- I'm not gonna lie, it looks pretty damn good comparing the two
29-03 UPDATE:
My progress with the updated 2.0 version has been posted. The editing and calculator pages of the skin are not yet finished so my original skin is used for those.
25-03 UPDATE:
I've now started to update the keyboard and skin to the newer version (3.9.10.10.5032). I got the keyboard from PPCGeeks (cheers to jj62mtp, the second post). I know there have been issues but apparently this one does not cause any and it has worked flawlessly on my Telus HTC Diamond running MightyROM6. This skin isn't even close to being finished but again I'll only be doing the VGA Portrait version. Here's a taste of what I've got so far.
Files Below -
Swype 2.0 (complete original 'android' skin): Android-Like Swype Keyboard.cab
Jan 25/11 UPDATE: Swype 11 Colour.cab
IF YOU DOWNLOAD THIS, PLEASE FILL OUT THE POLL! THANKS
Enjoy
Hey, can you tell me briefly how to skin for Swype? Maybe I can complete this skin/ make other ones.
cyanide911 said:
Hey, can you tell me briefly how to skin for Swype? Maybe I can complete this skin/ make other ones.
Click to expand...
Click to collapse
Hey yea sure, all you do is open the .cab with a cab editor (I've used WinCe Cab Manager, but to download it's only a 30 day trial). In the files you then extract all the .bmp files, and then just edit them to this skin (lol I've been using paint so far). After they are skinned, replace the old skin .bmps in the cab and save it.
thanks for the help
ps. if you or anyone knows how to play with the programming for the swype keyboard could you let me know? I wanna change some of the 'hold' symbols, possibly add smileys and play with the button sizes.
Mate does this thing works on I-mate Jam with Cotulla wm6.5 rom??
jamb said:
Mate does this thing works on I-mate Jam with Cotulla wm6.5 rom??
Click to expand...
Click to collapse
Um... well my diamond whose resolution is 480x640 is running on mightyrom wm 6.5 and your resolution is 240x320 so if this program can adjust the skin for the size the ratio is still the same... the buttons might be a little small for you. but honestly you'll have to try it to find out. worst comes to worst i dont think it will crash your phone so no harm there (but dont quote me)
what about an WVGA res ? (480x800)
Love your work
WQVGA???
pixine786 said:
what about an WVGA res ? (480x800)
Love your work
Click to expand...
Click to collapse
thanks I appreciate that um so I don't have a wvga phone around so im not quite sure what I need to do for all other resolutions. can you run the skin I provided? is it too small?
rfarrah said:
WQVGA???
Click to expand...
Click to collapse
ditto for you... im not quite sure what i need to do to make it wqvga. if you guys know i can sure try to skin it
Skin updated to 3.9 version of keyboard (check 1st post)
Updated work posted
nice looking skin mate would love to use it on my hd2. Tried it but keys r to small lol. Hope that you do a wvga one. If d you do let me know and I will test for you. Thanks and keep up the hard work.
m0nkeyman said:
nice looking skin mate would love to use it on my hd2. Tried it but keys r to small lol. Hope that you do a wvga one. If d you do let me know and I will test for you. Thanks and keep up the hard work.
Click to expand...
Click to collapse
hey thanks sorry to say i don't think I will... I've gone over to android and I'm not planning on coming back
Hey guys I have an HTC 8900 Tilt running WM6.1 and I installed swype 3.9. When I go to use the swype keyboard on the touchscreen, the keyboard was way too large for the touchscreen. The touchscreen fits less than half of the keys and theres no way under the options menu to fit the swype keyboard to screen. Attached is a picture of what Im talking about. Please help!
tiltuser031 said:
Hey guys I have an HTC 8900 Tilt running WM6.1 and I installed swype 3.9. When I go to use the swype keyboard on the touchscreen, the keyboard was way too large for the touchscreen. The touchscreen fits less than half of the keys and theres no way under the options menu to fit the swype keyboard to screen. Attached is a picture of what Im talking about. Please help!
Click to expand...
Click to collapse
Don't know what to tell you... I was running 6.5 and your screen resolution is different... that might be the issue
this is good work
i just hoped 3.9 was a little faster
The keyboard has been updated with a sexy new look. Check it out
thanks for filling the poll even if you don't use this
if anyone has any suggestions for the skin lemme know
Skining the Keyabord
Hey Guys
I know to skin swype keyboard i need to edit .cab file, where is this cab file stored, i would like to make iPhone style keyboard can any one help.
Just to add i need to do it for desire hd.
thanks
Dev
One major problem: if installed, then uninstalled, the original swype is uninstalled, too, and causes error message to appear when rebooting phone. Error message is something about a missing English file. To get swype back to working, I had to reinstall your version of it. And, the keyboard is a bit too small. My phone: A Samsung i920 Omnia 2 WVGA.
Anyone know how to get back the Samsung Swype version without hard setting the phone (not gonna happen), please let me know. I would appreciate the info. I've searched a couple other forums such as Modaco and PPCGeeks but Swype company has forced them to pull the file off their forums.