Bluetooth Handsfree with Becker Indianapolis - Touch Diamond, MDA Compact IV General

Hi all,
grat forum here.. I already used the search function, but I could not find a solution to this problem:
1. Pairing of my HTC Diamond with the Becker Indianapolis is working fine and stable
2. If I call someone, I can hear him speaking very well..
3. If I try to speak nothing gets through
Has someone a hint or tweak whar is wrong with my configuration ?
Thank you in advance for your help...
Best Regards,
Leo

Related

Jabra BT 800 and Broadcomm 3900 upgrade

:? Hi guys Just wondered if any of you guys are experienced problems with the Jabra bt800 working intermittently. Sometimes it works but most of the time it does'nt . I've upgraded to Broadcom 3900 and although blue tooth audio still crackles its not as bad.. The headset works alot better with my SPV C500.. Any ideas or experiences :?:
bt 800
hi i have xda2s with bt 800 working somtimes
i upgradeed to bt3900 but i see no change
somtime i takes 5-6 kye presss to unswerr a phone call
i do not have any audio problem the audio is ok
glad to know i am not the only one.. cheers for replying
did you try to contact jabra support???
I have a contact in GN Netcom so will have a chat with him next week and post the response here
thenks :wink:
:? Ok after talking to my contact in GN Netcom we have come to the conclusion (seings as it works fine with my Motorolla V3 and Nokia 6810 and 6820 and Siemens SK65) that the issue lies with the Bluetooth stack on my 2s.I did explain about this that i had upgraded it to the newer version and i personally believe they have not totally replicated the way the Bluetooth in the xda2s behaves the same as a normal bluetooth enabled phones.
I believe that because it works fine on most of the Manufacturers phones and the XDA's of this world are low priority to get it right.. I still believe it will be fixed in future Bluetooth upgrades on the xda2s.. doh still think that even though the display and buttons work intermittently it is still worth having for the DSP
The problem still exists!
I have Qrek 9090 and Jabra t800. Audio is very good and also on the good range.
BUT...
Main problem (even with Jabra 800 fix CAB file) is that I can't normaly answer the phone call. It takes about 5 or 6 times before I can reply the call. And also, it takes about 2 seconds before I can hear other side opponent.
I just wonder if you people have some kind of this problem. Any expirince. Could you please share with me some information.
I use Danghard rom 1.44 wit BT 3900.
Thanks a lot.
Leonid.
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Thank you, but I'm talking about Jabra BT 800, cause it has so many features that I need. So, I would like that my Jabra headset will work fine with Qtek 9090.
Guys, please help! :lol:
Guys! Really need your help.
I used before another headset and didn't have any problems. But after I bought Jabra BT 800 I got serous problems. It really takes about 6 rings before I can answer a call. So, a lot of people just hang up and I have to call them back. :evil:
Nothing really helped. :evil:
I'm confused, cause I really like this headset and would like to use it.
HELP!
:lol:
Thanks!
hdubli said:
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Click to expand...
Click to collapse
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
Moreover, Motorolla and Bluetrek supports voice dialing too
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
well I too own a Bluetreck G2R and a lot of crackling sound I have upgraded my BT stack to 3900 and most of my callers only hear the crackling so I have to swap my call to the phone and talk or have to call them back
also how do u use Voice dailing on the bluetreck for my xda IIs ???
can some one help me ?
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Thanks
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Eehheh and you call that voice dialing?
If i had to do all of that to voice dial i could also press the button on the device and talk the name to it. And that would be one click less than with your solution.
I think the idea of voice dial with bluetooth is to keep the phone in your pocket and do the talking via bluetooth only.
hdubli said:
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Click to expand...
Click to collapse
Re: Thanks
spread_smiles said:
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Click to expand...
Click to collapse
But can you tell me. Do you also have such problems with Jabra 800 as I have. The sound of BT and range is best. But what about time to answer the call. I press answer button hundred times to be able to speake with opponent.
Hi again guys.
Still can't solve my problem with BT 800.
I contacted with several companies but didn't get any correct answer.
Really don't know what to do.
Can you please tell what exactly this CAB file from FTP fixes cause nothig changed since I installed it.
Thank you and please foget me for bothering you.
Leo.
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Solid_Lynx said:
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Click to expand...
Click to collapse
Well, thank you.
But as I understood from different threads in forum this is one way.
But... I'll kill battery of PDA very quickly. Really don't think that it's a good idea.
People from Jabra told me that new firmware will come soon and will help to solve this problem.
So.. I think that it's not the fault of PDA or ROM... :?

kaiser and parrot ck3100 car kit - please help me

hello. I can hear only the calls (phone) on my ck3100 (bluetooth). I need to hear also the tomtom voice and music. Please somebody help me! thank you very much.
This will help you ...
best wishes
TQM
clkuv said:
hello. I can hear only the calls (phone) on my ck3100 (bluetooth). I need to hear also the tomtom voice and music. Please somebody help me! thank you very much.
Click to expand...
Click to collapse
Hi CLKuv, If that is your only problem you are doing well! There are a lot of people, myself included, that just cannot get the CK3100 (or other Parrots) working with the TyTN II at all. In brief (since I have posted all my troubles elsewhere on this Kaiser forum), when I try to dial someone, it very frequently just issues two-tone bleeps and sometimes shows an icon of a musical note with a line through it. Sometimes there is complete silence when you go to dial. The people on other end get their phone ringing but hear nothing when they pick up, nor do I. Also, when they try to phone me, CK3100 rings but when I try to answer, silence in both directions again! Tried lots of different solutions (Jetware, Parrot Firmware Update, etc.) but no luck. Lobbying Parrot & T-Mobile hard!.
Hi
I've got an CK3400GPS and i must say that i've got no problems al all.
At the moment i've got a MDA vario III but also with other HTC devices the carkit works fine,
I'm gonna test this program so i can see if this is usefull for me.
Thanx
horatiog said:
Hi CLKuv, If that is your only problem you are doing well! There are a lot of people, myself included, that just cannot get the CK3100 (or other Parrots) working with the TyTN II at all. In brief (since I have posted all my troubles elsewhere on this Kaiser forum), when I try to dial someone, it very frequently just issues two-tone bleeps and sometimes shows an icon of a musical note with a line through it. Sometimes there is complete silence when you go to dial. The people on other end get their phone ringing but hear nothing when they pick up, nor do I. Also, when they try to phone me, CK3100 rings but when I try to answer, silence in both directions again! Tried lots of different solutions (Jetware, Parrot Firmware Update, etc.) but no luck. Lobbying Parrot & T-Mobile hard!.
Click to expand...
Click to collapse
I've that musical note, too. I've also had my radio go mute for no reason, which requires a soft reset of the vehicle (quite inconvenient to say the least). I also recently had an issue where the phone would not let me dial. I kept pressing the green phone button near the dpad and the phone just would not go to the dialer screen. Bizarre.
The problem in cases like this is that Parrot sez it's HTC's fault, and HTC sez it's Parrot's fault. And the consumer gets caught in the middle.
You need to put on the latest Parrot firmware for best compatability with Windows Mobile. The issue with the Parrot kids is not the TYTN 2, but Windows Mobile. This has been addressed in the latest firmware of at least the 3200LS Colour...

A2DP in Touch-IT wm6.1 Black

First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Papamopps was asking this same question to me the other day....
I am trying to fix this one just keep coming back everyday for new posts.
Unless somebody else allready found the fix. Post this here. Thanks
mhhhh i will have a look at it....
... because after ayerthons workout for standy music.....
.... i bought a headset and 4gb sdhc card.
we´ll find a way for a2dp to work....
As I found in other threads and devices - try to use HTweakC for a2dp problems.
I also PM ithe that some cooks take 2 files from old ROM WM6 and replace the new files on WM6.1 with them - did teh trick for some...
or try this fix:
http://forum.xda-developers.com/showpost.php?p=1066713&postcount=1
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
hmm but wep200 is just not compatible with a2dp.. to use it to listen music you may use bluemusic, bt toggle or bt audio toggle (and im think there is a few more programs) but the quality is (i couldnt find a word) awful.
i didnt try a2dp on itje's roms but it works "out of box" on opentouch 3.0(same build) and pdaviet 6.1
im using motorola ht820 headset which ofcourse support a2dp.
marty123 said:
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
Click to expand...
Click to collapse
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
papamopps said:
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
Click to expand...
Click to collapse
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Sorry if I confused you guys
marty123 said:
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
Click to expand...
Click to collapse
Sorry if I confused you guys but I believe my headset WEP200 works with A2DP because I tried on Open Touch wm6.1. I didn't set A2DP tho... I am not sure if the ROM cooked with it but it worked. The real problem is that I can not use Open Touch because my wing freezes ALL the time.. so I'm more into itje's ROMs..
So uhm.. sorry for not responding to the original TS - but am I to understand that there are bluetooth stereo issues with the 6.1 WM roms?
I bought a sony ericsson ds980 stereo bluetooth headset the other day. My phone is currently being repaired by HTC (at least, I hope it is) - I intend to flash Itje's latest wm6.1 ROM to it the second I have my mighty Herald returned to me.
But... WM6.1 doesn't work well with Stereo Bluetooth you say? Even with the suggested fixes in the posts above?
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
which fix?
I only said let´s try this fix. I´ll get my headset during this week and i will try it.....
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
slimag said:
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
Click to expand...
Click to collapse
here you go.....
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
papamopps said:
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
Click to expand...
Click to collapse
Awsome to hear this..Now I am going to stop my research. And start searching for another great TWEAK
And i think i'm going to buy a headset to

Diamond Microphone Problems

Hi I'm having some problems with my Diamond (ROM 1.93.456.2 / WWE Radio 1.00.25.05)
Whenever I call or if somebody calls me they can barely hear me. I have to really talk very loud or speak directly to the microphone.
I even tried to test using the recorder and the results are the same.
Hope you can help me.
Thanks in advance.
Duplicate Issue
Hi, this is being covered in the following thread...
http://forum.xda-developers.com/showthread.php?t=418383

BT disconnect after call

Hi everybody!
I am really sorry if this was answered somewhere, but I couldn't find solution anywhere on forum.
I have Dutty's latest ROM and HBH-DS220 bt hp.
A2DP works superb. I can take calls but after call si finnished BT disconnect and music resume on internal speaker.
Is there any solution for this???
Tnx for everything you guys and girls doing for community.
I really appreciate that.
Respect.
Hi,
did you solve the issue ?
I'm experiencing the exact same issue suddenly, never had this problem before and now it's hanging after each call.
Really annoying.
BR

Categories

Resources