Database Develop

headpnone adapter

PPC Techs XDA/SX56 2.5mm/3.5mm Audio Headset Adaptor
This adaptor converts the proprietary 4 conductor Pocket PC phone jack found on the XDA to a STD 2.5mm headset jack and 3.5mm stereo headphone Jack, and includes a PPCPE compatible answer/mute button. The adaptor cable is approximately 5" long.
Click to expand...
Click to collapse
http://www.expansys.com/product.asp?code=PPCPADPT01
What are your thoughts. Seems like a good product. Be able to use some decent headphones for listening to those mp3z . . .
Anybody used one of these?

is the answer/mute button only for those 2 functions or is that module also acting as a microphone (don't think so)? looks good to me but i use the headset adaptor i bought from this internet site based in hong kong. check out:
http://pc-mobile.net/pxdaa.jpg (the website is http://pc-mobile.net)
it comes with a standard 2.5 mm jack for the xda. the wire is on a retractable mechanism to avoid tangling. at the other end is the stereo phone jack which serves as an answer/end button and as a microphone as well. there's a single headphone jack connected which uses a 3.5mm plug. when you want to listen to the toons using your 2-headphone set; you simply unplug the jack and insert any 3.5mm plug-based headset. in effect you can use any 3.5 headset as handsfree.
costs 26usd but services are 5-stars for me.
cheers

Anyone tried this adaptor from pc-moblie.net? The sound quality is good or bad?

i doubt that it could damage the quality so you can hear it unless you connect it to a stereo's lineIn and play it out using real speakers
those headsets are too limited imho to take much damage from a few connectors

However, all these things are not suitable for xdaII.
I bought one from pc-mobile and the quality is good. However, since the new xdaII got 2 buttons in its handsfree design, this product from pc-mobile is not fully compatible. You can hear from it but you can't pick up or end call from it as compared to xda1 you can.
I hope they can produce another product which is fully compatible with xda2. Otherwise, I may have to go for bluetooth but really worry about the battery.
Also, can I or is there anyone using the bluetooth handsfree for mp3 playing????? I doubt that very much.
I do really like the pc-mobile handsfree which is retractable and handy.
Any alternative in the market?? You got the adaptor but I think its only good for audio MP3 listening. If you attach another headsfree to the adaptor for business use (don't know whether we can...), you will have 2 buttons (one for the adaptor and one for the handsfree) which is quite funny !
Does somebody else have this problem and find a solution?
Do most people use bluetooth?

*Damn* !
Been creating a cable myself, tried it yesterdaynight late....
The damn thing didn't answer the phone when i pressed te button.
I cut the audio-out cord and trew the cable away, because i tought the mic didn't work....
Now i read this.... Guess the mic did work, but the answerbutton didn't.
Now i hope i can rewire the audio-out cabels again, so i haven't been soldering for nothing last night

Headphone adapter for HTC magic
Hello.
On the HTC magic, there isnt a 2.5 or a 3.5 headphone jack! there is only a mini USB jack. Does anyone know where i could get a mini USB jack adapter to turn it into a regular headphone jack?
Even if anybody knows what kind of mini USB jack comes on the HTC then that would be lots of help! because ive already purchased one that fit, but didnt work so it must have been a different type.
Thanks in advance!

http://www.google.dk/search?hl=da&q=extusb+to+minijack&btnG=Søg&meta=&aq=f&oq=

Is there a way to disable the loudspeaker whilst playing music?

There is one reason why I have never used my Kaiser as a music/media player - the lack of a headphone jack. I am now look at upgrading to a Rhodium, but again HTC fails to include the most basic of requirements. pfff
I know that I can get a headphone adaptor, or even use bluetooth, but the problem for me is that whenever the usb plug falls out, as it invariably does, or the bluetooth signal drops, I instantly upset everyone within 100m by blasting crappy tinny sounding music at them through the phone speaker. Of course, 3.5mm jacks don't have the same habit of just falling out.
Therefore, is there any way that I can set up the phone so that when music or media is playing (usually through Coreplayer) the phone speaker is disabled?
Thanks

Plug in headphones? Otherwise if your not using the speakerphone how would you hear anything?
I've used a 3.5mm to mini usb cable and adapter, they both worked fine. I liked the cable better since i worried less about it breaking in my pocket. Its not the exact same one i am using right now but this one is only a penny.
http://www.amazon.com/Stereo-Headset-Speaker-Adaptor-phones/dp/B0013URK04/ref=pd_cp_e_3

but therein lies the problem - because the headphone output is mini-usb, it is always at risk of falling out (far more so than a 3.5mm jack).

Yea life is tough that way. I've yet to have anything just fall out of my mini usb port myself.
I suppose you could write a script that detects if anything is plugged in to the usb port ala Audio Booster, and auto mute if nothing is detected. But i don't think i've seen an auto mute app or anything like that.

Here's a kind of work around. I found this doing a google search for Auto Mute for PPC. http://www.pocketpcfreeware.com/en/index.php?soft=277
You could fire it up set it for an hour or so and listen away w/out fear, in theory at least.

that's a great idea - I'll give it a go. Thanks for taking the time.

Hope it works for ya! I can't get to the site and test it myself. I'm at work

Looks like the link is broken, but the idea is worth spending some time with google for

Damn.
This one says WinMo 5 ver 1.1, but i would think WinMo 6 is backward compatible. What about this one?
http://handheld.softpedia.com/get/System-Utilities/Enhancements/Automatic-Mute-WM5-36048.shtml

Use topaz as bluetooth headset / use on-board mic

I have searched everywhere and can't seem to find a answer to this...
I use a phone cradle in the car, using my topaz as my music player, connecting my phone to my car stereo with a male-male 3.5mm audio jack.
I want to be able to steam music via bluetooth from any other compatible phone / device to my phone, meaning I don't have to trail cables everywhere when a passenger wants to play something.
I would have thought this to be a simple-ish thing to setup but cannot find any information on how to do it. Is it even possible, and where would I start if it is?
I also want to use my on-board mic when the headset is plugged so I can have call audio over car speakers, although iv been led to believe this isn't possible because of hardware reasons, can anybody clarify that?
Apologies if this is in the wrong forum, not really sure where it should have gone.

If I understand you correctly, you want to stream music TO your phone over BT from another device? Not possible.
For hearing call over speakers and using mic, you need to get the M-F w/built in mic.

I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....

mitsi said:
I too don't think it will be possible to stream music from another device to your phone except if you transfer the entire music mp3 file via bluetooth to your device and then play it from there.
Regarding the possibility of using the device's microphone whilst using the car speakers for sound, again I'm afraid I don't think this is possible. I have a similar set-up to you in that my TD2 is connected to an FM transmitter which also charges my TD2 at the same time in a nice cradle. The TD2 thinks it is connected to a headset when cradled. The microphone is inactive in this state which is a shame as it would have made a good hands free system if it were to be active....
Click to expand...
Click to collapse
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.

Bruce Inman said:
I use this set up as well. You just need the cable with the built in mic.
My RF Transmitter has a male plug, So I found the HTC cable that has the HTC USB to Female with built in mic. This is my basic set up.
Click to expand...
Click to collapse
That set up looks great Bruce, but I don't want to be fiddling about plugging in so many cables with so many wires visible. Brodit does something similar too, all in a cradle with an extended wire so you would be able to hide all the cables....

[Q] USB to Jack

Hey,
I was wondering about the quality of such cables. Like this one :
http://www.befr.ebay.be/itm/ADAPTAT...ripheriques_CasquesMicros&hash=item20bc79d7f1
Do they work well ? My stock headset is dying and want to replace it with a standard jack headset. Does this adaptator affect the sound quality ?
And on a side note, does headset buttons and controls still work if I use it ?
Thanks.

Sound quality is not affected, i'm sure at 99%,but all depends on your headphones,i bougth a snheisser by 10$ and i'm so glad with them.
About the buttons headset didn't proved it but i think they would work.

I bought something like that, the phone doesn't automatically detect it so I have to use a widget to activate it. The sound quality is ok, but it's better over bluetooth

Ya it work
One you have showed is 5-pin mini USB(male) to 3.5mm jack (female) and if button is on the connector it will work, if button is on your earphones then it will not work. I also use this kind of connector but it came with the box.:good:

Nexus6 hard-wired car dock help.

I am thinking of replacing the stereo in my car with a dock for my Nexus6. I was going to just buy a new head unit for Bluetooth connectivity and hands free calling on the road. Then i thought why spend money on adding a layer between me and my phone since i don't use my radio anyway.
I have seen lots of write ups and videos of how to replace your stereo with a tablet. But the one thing I have never seen anyone do is add hands free calling for their phone.
I am hoping someone can tell me how to wire a mic in to a USB cable as I also take audio out to run to an amp and power in back to the phone. I am aware I will not have fade control just balance and I am good with that.
I am aware that I will need to run the output to an amp and my Jeep has one from the factory. I am not worried about wiring in a converter to supply power and already have one that charges the phone while using gps and play music at the same time and a dedicated fused circuit activated by relay so there are no issues with battery drain. I will build a custom dock with a USB cable mounted in it in the dash in place of the removed stereo. I plan on using one of the wired mics you use with an aftermarket pioneer stereo mounted on the dash. The specs for it are Polar pattern: Omni directional Mic diameter's 9.7*4.5mm Sensitivity:-47dB+/-2dB Frequency Range: 20-20KHz Output Impedance: ≤2.2 kΩ SNR: >58dB Standard Operation Voltage: 4.5V Operation Voltage: 1.0V-10V.DC Wire Length: 4 M Ref Pioneer part no: CPM1064 CPM1084
What I need is someone to please show me how to splice the cable so I can add rca connectors to audio out, mic in, and power in and have it work. Or if that can't be done I can add a qi charger to the dock if I can wire the speaker out and mic in as a usb headset and make that work. Or if I need to add a signal booster to the mic input to make it work please say so and give me specs to go find one.
Thank you in advance for any help or useful suggestions.

Rmcrow2 said:
I am thinking of replacing the stereo in my car with a dock for my Nexus6. ......
I am aware that I will need to run the output to an amp and my Jeep has one from the factory......
any help or useful suggestions.
Click to expand...
Click to collapse
A hard card case or soft case with a metal 1 cm below the M-logo. A neodymium magnet on the dashboard. No car kit needed. The speaker of the N6 is loud enough for use in a car for navigation and phone. Same with microphone.
Option is to use a phone jack converter to connect the N6 output to the radio.
An example how I used my N7 in the car.
http://forum.xda-developers.com/showthread.php?t=2137636/ - post #65
Note my N6 case has metal at the outside and below the M-logo, because behind the logo is a magnet sensor that switches off the screen.

Thank you, but I have children. I need to be able to play music, and their moms voice through the car speakers on long drives.
The car I prefer to drive is also noisy and my phone can't always hear me when it is in the dash mount.
What I want is just to make a wired connection to a mic, speakers, and power, through the micro USB port. So I get in the car, plug my phone in, and slide it into a permanent holder.
Money matters and this would be free, also convient since all my stereo did was get music and calls from my phone anyway.
I know how to wire in a Bluetooth reviever for the audio, and a qi charger so that would be wireless but I don't know how to get a mic input back to the phone, none of the premade affordable receivers I have seen have a mic input.
And I am aware I could take audio out and in from the 3.5 jack and either go wireless for the charging or have to plug in two cords in I get in the car.
I appreciate your help but I am looking for help to reach a specific solution that will be best for me.

Rmcrow2 said:
but I don't know how to get a mic input back to the phone, none of the premade affordable receivers I have seen have a mic input.
I appreciate your help but I am looking for help to reach a specific solution that will be best for me.
Click to expand...
Click to collapse
I assumed already that you were looking for a custom and cheap solution, that's why I gave you mine. Just for the possibility you will get an idea.
About the microphone.
Wired headsets with earphones and microphone are normally connected to the 3,5-jack.
I think the mic-input-connector is there and not in the USB connector of the N6.
The N6 is not that different compared with other smartphones.
There are adapters available Google '3,5 inch headset adapter'

You are right in that there are dedicated connections already at the jack, and that they would be easy to just splice leads onto a standard wired headset to extend to where I want the leads to go. Even if i need to add a signal booster to the mic line.
My wife has a usb headset that works fine with my phone though so I know the capability is there, as with audio out on a usb connection to a stereo.
She wont let me cut up her headset to see what goes where though and it takes a while to get one from china. I was hoping someone knew so I could use what I have on hand rather than spending anything, I am cheap.
Thanks for your help, i have used my phone for music and handsfree when it's just me in the car on short hops. It does work fine for that and as a portable music player anywhere not to loud without any problems.
Once again thank you.

Rmcrow2 said:
.
She wont let me cut up her headset to see what goes where .
Click to expand...
Click to collapse
https://www.google.nl/imgres?imgurl...bNAhWH2xoKHRsUCi4QMwg_KBkwGQ&iact=mrc&uact=8/

Thank you. I spent my time researching if anyone has put an Android auto onto Raspberry Pi and stuck it in there car and I haven't Googled for the pan out yet because I haven't had time to rip open the dash in my car thank you I appreciate that period I'm having to voice text right now so please forgive me for poor grammar and spelling

Rmcrow2 said:
... so please forgive me for poor grammar and spelling
Click to expand...
Click to collapse
You're welcome. It was nice to meet you.