Hi Guys,
I have a Diamond on Orange UK. I have recently installed TF3D Config and used a few of the tweaks. Also installed a new theme (black colored). Since making the changes, I have noticed that I can no longer connect to my home network via wifi. Does anyone know how or why this would have changed? It wont connect, and sometimes says I've entered the wrong network key (which is my password right?????). But I'm sure I've entered it correctly. Please can someone shed some light on this?
Thanks in advance
Related
i new to this whole pocket pc thing, and i found this site and started upgrading my t-mobile mda. first i upgraded the rom to the k-jam upgrade and everything worked fine. then i started messing with the registry with registry wizard. that was fine also. but as soon as i hit the edge icon tweak, i can no longer connect to gprs. i get a msg saying
"Cannot connect. make sure your phone is turned on, or tap settings to check your connection settings. "
can anyone help me. i didnt alter the settings from when it was working so im unsure of what the problem is. any help is greatly appreciated
sounds like ou ahve been doing a fair amount of tweaking. Even in the registry. Are you sure it was the Edge icon tweak that did it as my Cingular 8125 is running 2.16.9.1WWE and I have made that change and mine works fine. My wonder is if one of the previous changes didn't take affect until a reload or a new program load, and that is what actually caused the problem. I loaded some cingular cabs yesterday and it broke activesync.
ethorn said:
sounds like ou ahve been doing a fair amount of tweaking. Even in the registry. Are you sure it was the Edge icon tweak that did it as my Cingular 8125 is running 2.16.9.1WWE and I have made that change and mine works fine. My wonder is if one of the previous changes didn't take affect until a reload or a new program load, and that is what actually caused the problem. I loaded some cingular cabs yesterday and it broke activesync.
Click to expand...
Click to collapse
yah i know. but even after i restored my original registry settings i still cannot connect. when i try to connect, the window that shows gprs is trying to connect flashes 2x then it reads the msg i posted. any ideas
none here... I hope someone else can help, or you can hard reset and try to do the changes slowly soft reset a couple of times after each change until you figure out which one cased it. Each change including installed programs.
Sorry
mine does the same thing and I have been able to get it to connect without reset. Tap your signal bar on screen and turn on flight mode than turn off it will reset connections. It happens after every sync or charge for me and once we are able to unlock the cid and install the cing ext rom it might go away.
i actually just got rid of the program and it works now
Hello!
I´m experiencing a big connection problem on my HTC Touch Diamond device. I´m using the Austrian Version of the Touch Diamond from T-Mobile.
The problem is as follows:
If i try to do an internet connect via HSDPA/GPRS/EDGE i couldn´t receive any data but the icon on the menubar says that i´m connected. Sometimes it needs up to 10 reconnects to solve the problem and get finally the information from the internet.
I have activated the ActiveSync Exchange synchronization and an seperate gmail account via imap. I´ve adjusted as synchronizationtime 60 minutes for both.
If the HSDPA/GPRS/EDGE "hangs" i could not receive anything. So i cannot be sure to be up to date on my cellular. And the cellular isn´t intelligent enough to detect this hanging connection and do a reconnect on its own. But this is really crucial for my job.
Is there a known problem? A newer rom version or any advise?
I´ve installed "Microsoft .NET Framework 3.5.283.0", "advanced Config" and "Diamond TF3D Config" and the HTC Black Theme on our cellulars. I´ve reproduced these malfunction on an other device with the same configuration.
I´ve already done a hardreset on my device. But that hasn´t solved the problem.
The ROM Version is 1.37.112.3 GER
ROMdate 06/20/2008
RADIO Version
1.00.25.03
Advanced Config Settings (Version 3.0.0.0):
All "Power Management" Tweaks
All "Performances" advised values
CommManager added 3G Mode Switch
Internet Connection with Disconnect 10 Minutes (This setting doesn´t have got an impact on the behaviour)
Diamond TF3D Config Version 0.6.7
Branded Style for Home deactivated
TouchFloPerformance Tweak 1,2 and 3
I´m looking forward for any advise. Thank you in advance.
with best regards
THINK
Hi,
Having the same issue in the UK, anyone got a solution?
Hey, i've had my diamoind for a few weeks and i have even upgraded the ROM using the advice on this site, thanks everyone!
As for my newest issue, out of the blue i woke up and my wifi will not turn on. It's working on all of my computers so i know it's not a network problem. It has been working on my phone recently with no real problem. I can't turn it on from the touch flo 3d interface or the windows mobile interface. The windows mobiel interface just gives me a button to turn the wifi on but nothing happens when i push the button.
I am using the 1.93 ROM and love the improvements in speed. Please let me know what i can do to help diagnose the problem
Hey, I got the same, after several months using it with duttys ROM... I can't turn it on neither in comm manager nor in any of that windows settings...
HELP don't wanna lose all settings...
Hi,
Before anyone shouts, I have searched the forums and read hundreds of posts but haven't found the answer! I have a stock TMUK MDA Compact IV which is, to say the least, slow and unstable. It's totally stock at the moment and I want to flash it to the latest official HTC Diamond 2.03 ROM as there are plenty of reports of speed and stability improvements.
Question - will the GPRS/3G connection settings (and any other network-specific setup I need) automatically detect or will I have to manually configure them after flashing? The TMUK stock ROM hides the connection details so I can't make a note of them - I therefore want to be sure I have all the details I need before I blow the old ROM away!!
Any help would be very much appreciated.
Cheers,
Tim
I didn't use the latest official ROM, but the previous one automatically detected the network setting after 1 or 2 minutes of being "on air". You get a notification that network settings have been found, and it will ask if you want to install them.
So i assume the new ROM does exactly the same
Hi,
Do a search on Modaco, they have a cab that gives you the T-Mobile settings.
Regards
the rom will automatically pic up that its needs settings so you select the correct option then you accept the settings and all will be fine.im on TMUK with a Diamond and everything is sweet.
Upgraded fine - a few more questions!
Upgraded fine thanks everyone. I had to select my network and it automatically set up the connections. One strange thing is that if I selected "T-Mobile" the next screen of the wizard had a different network name listed! Seems that the names and connection details are mixed up, I had to go through each network and find the one with T-Mobile's settings behind it. Think it was "Fresh" in the end!
Anyway, a couple of strange things I've noticed and wondered if anyone could help. Apart from these, so far the ROM is a big improvment on the old one.
1 - My GMail account will only download over the air if I set the account to connect using my GPRS connection - if I leave it on "The Internet" it fails to connect even though the connections are configured so that "The Internet" links to my GPRS connection! Opera works fine, so it's a messaging issue.
2 - The main problem - I can't get WMWiFiRouter to install! I had it working fine on my old ROM, but when I run the cab to install now it just sits with the progress bar on zero with the rotating "busy" symbol forever. Other cabs install fine! Any ideas?
Thanks,
Tim
Never mind!
Never mind, looks like the cab file was corrupted somehow. Copied back from my PC and it installed fine!
Thanks,
Tim
Hi!
I was trying to set up the internet on my mobile exactly the same as the Lebars's manual says so but it's not working.
Before I came to UK I was using my kaiser internet connection with any problems, so now it should be the same here - just put some numbers and voilà! But when I put all the information (I know they are correct) there is a connection error. Any one know that issue?
Please let me know if you know how to solve thins problem!
Thanks in advance!
Matty.