HTC Touch Diamond Connection Problems - Touch Diamond, MDA Compact IV General

Hello!
I´m experiencing a big connection problem on my HTC Touch Diamond device. I´m using the Austrian Version of the Touch Diamond from T-Mobile.
The problem is as follows:
If i try to do an internet connect via HSDPA/GPRS/EDGE i couldn´t receive any data but the icon on the menubar says that i´m connected. Sometimes it needs up to 10 reconnects to solve the problem and get finally the information from the internet.
I have activated the ActiveSync Exchange synchronization and an seperate gmail account via imap. I´ve adjusted as synchronizationtime 60 minutes for both.
If the HSDPA/GPRS/EDGE "hangs" i could not receive anything. So i cannot be sure to be up to date on my cellular. And the cellular isn´t intelligent enough to detect this hanging connection and do a reconnect on its own. But this is really crucial for my job.
Is there a known problem? A newer rom version or any advise?
I´ve installed "Microsoft .NET Framework 3.5.283.0", "advanced Config" and "Diamond TF3D Config" and the HTC Black Theme on our cellulars. I´ve reproduced these malfunction on an other device with the same configuration.
I´ve already done a hardreset on my device. But that hasn´t solved the problem.
The ROM Version is 1.37.112.3 GER
ROMdate 06/20/2008
RADIO Version
1.00.25.03
Advanced Config Settings (Version 3.0.0.0):
All "Power Management" Tweaks
All "Performances" advised values
CommManager added 3G Mode Switch
Internet Connection with Disconnect 10 Minutes (This setting doesn´t have got an impact on the behaviour)
Diamond TF3D Config Version 0.6.7
Branded Style for Home deactivated
TouchFloPerformance Tweak 1,2 and 3
I´m looking forward for any advise. Thank you in advance.
with best regards
THINK

Hi,
Having the same issue in the UK, anyone got a solution?

Related

Bugs In O2 Rom 'Upgrade' v1.31.139

Hi
I have been playing with this for a day now, and it has introduced more bugs in the wifi functionality. If you want to use WiFi from your IIs then I would avoid this 'update' like the plauge.
What you get:
- ROM: 1.31.00 WWE (13th Dec 04) so this is 2.5 months old
- Radio 1.06.00 (1.06.02 is latest)
- ExtRom: 1.31.139 WWE (no real updates to existing progs)
Whats Better
---------------
- The camera performs better in low light conditions (I used to get vertical lines on the screen
- Bluetooth stack build 3500. A vast improvement, but the latest is now build 3900 which some say solves the 'scratching noise' that is heard in some headsets
Whats Worse/Not Fixed
---------------------------
- O2 Active V3.5. Its bloody awful - spends its life redrawing the screen, its very sluggish, and adds nothing to the today screen. I never used to use the old version, but having the O2 icon was handy for its ability to list the active connections and terminate them. Much is made of the ability to change the position of the icon (which I never found to be a problem in the first place. Tapping the new icon starts O2 Active rather than listing the active connections. To list active connections, you need to tap and hold for 5 seconds. I find that after tapping and holding, I get the menu, but that the menu then fails to respond to my 'close connection' taps. I reverted back to the old O2 active program.
- WiFi. They have completely buggered it up. It was unreliable at best beforehand. I have a network at home, which I finally pursuaded the device to connect to after multiple resets. I headed into work this morning (2 AP's) switched it on, and it just sat there searching for the network. I went into Tools-->Network cards, and see the work network listed as 'connected' (it was not connected, I had not given it the PSK yet). I soft reset the device, and it finally saw the network and prompted with the usual 'Internet/Work' dialogue. I was then asked for the pass key. At this point I noticed that there is no longer a possibility to activate the soft keyboard in order to enter the pass key (A right pain in the arse when the passkey is just a random multicase/numeric key, and all you get are ** on the dialogue). Anyway, I entered the key, and the device refused to get a valid IP address. Doing IPconfig showed that the wireless card was trying to use an old GPRS IP!!! I tried a renew (3rd party ipconfig tool). I tried stopping and starting wifi. Eventually, I soft reset (still the same), so I stopped wifi, soft reset, started wifi - and *finally* it decided to go and get itsself an IP address. (this is a bug I saw in the old firmware, but its worse than it used to be).
- WiFi still marks the wrong networks as 'available', i.e at work, 10 miles from home, my home network is marked as 'available' and my work network is marked as 'unavailable' !!! (this is an old bug)
- In Network adapters, the dialogue, 'My Work Network Connects To:' is blank, and there is no longer a possibility to select work/internet (options are blank). This is new to v1.31.139 (anyone else also missing this)
- If you select a wifi connection and change it from being a 'work' connection to an 'internet' connection then the change does not stick. This is new to v1.31.139
- In the MMS applet, it is no longer possible to select a 'modem' directly. I used to be able to select 'O2 Active'. You now have to select a profile that includes an appropriate modem. This is new to v1.31.139
- When editing a network profile in 'network management' eg: My ISP. the device still forgets to display existing modem/vpn connections. (same as old version).
Out Of Date Software / missing software
-----------------------------------------------
- Photo Contacts (CallerId cab) is still version 1.17 (latest is 1.20)
- Missing O2 plus - other o2 devices include this
- Missing Intelipad
- Missing Smartdialer
- Old build of Java Midlet software
- Old build of MMS composer software
Other Thoughts
------------------
For my money, the device feels more sluggish than it did before. Though its difficult to prove this!
O2 has spent far too much time on that O2 Active rubbish - does *anyone* actually use this [email protected]?? - and not enough time integrating/testing the latest versions of CE, drivers, and third party apps.
I'll add more to this as I find new bugs, and send it all off to O2 in a couple of weeks.
What I am now using
------------------------
I am now using v1.31.139 + Bluetooth build 3900 + PhotoContacts 1.20 + Java build 1004.
----------------------------
Additions: 1/3/05
- SMS notify no longer seems to work. Anyone else suffer from this? MMS notify works fine and SMS notify is switched on. Perhaps the notify event is missing, but I have no idea how to sort this.
- VPN over wireless lan is still not possible - it tries and fails to connect. VPN over GPRS still works OK.
Additions 02/03/05
- SMS Notify problem is *not* to do with the rom update. I removed the registry key: HKLM\software\microsoft\inbox\svc\outlook since I had no need for the outlook folder in inbox. Removing this also kills off SMS notify!! I backed up, hard reset, preventing the stuff in the extended rom from installing. Installed PHM regedit, exported the outlook key, restored my backup and imported the reg key!!
- Internet/Work settings missing from Wlan setup. After restoring the backup, these had returned. Pretty strange, perhaps they were linked to the same registry key. No additional software bar the contents of the extended rom had been installed. If anyone else gets this, I suggest back, hard reset, restore might fix it.
Regards
Nigel
I have the same version with the latest radio build and cannot got the device to connect to my home Wifi what so ever.
Not exactly much use. It detects the network but refuses to connect. Either it says its connected but does not get an IP or it continously prompts for the network key.
I have also upgraded and am finding that the device often freezes when I try and switch it off, this happens about once or twice a day needing a soft reset.
I dont use the active stuff (which I never use) and am dissapointed that the O2 icon now starts O2 active rather than list the state of connections and allow you to trun them off i.e GPRS.
I agree the device does seem to be slower, I think I will be going back to the original code base and applying the BT patches, anyone know where there is a CAB installer for 3900?
check the ftp server
ftp://ftp.xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
username xda
password xda
its the file that ends in 3900.
I installed 3900 over the recent O2 update (3500) and all went fine. Just do a soft reset before playing with bluetooth or it will moan about an expired stack.
Nigel
SMS Notify
Hi
Anyone else found that the SMS notify stops working once the latest O2 update is installed. MMS notify works, but SMS does not - its damned anoying!
UPDATE: Found the reason for this see end of original post
Nigel
Thanks for the comments on the update. I think I will stay with the original 1.12 ROM! Where can you get the other updates for the Camera and Java and Bluetooth etc? I'm currently running Bluetooth 3500.
Cheers
This is why you should sell you XDA IIs on ebay and buy a XDA IIi :lol:
Well that IS a concept! Thanks made me grin!
Hi since I installed the new Rom, my clock keep on freezing. The phone goes on standby > then it freeze. If I wake up the phone , it will still be frozen.
I have to click on start > Today in order to refresh it. :evil:
Any ideas ? It's still happening with no other today pluggin. :x
Would you recommend we dont bother upgrading the ROM atm then?
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Remove entire O2 software:
You mean everything in the extended rom or just o2 active?
Hard reset, and when the message pops up about installing blah in 3 seconds (after you have done the touchscreen config) then soft reset. This gets you a plain vanilla HTC Blue Angel before the operator has installed its sh1te on it.
You can then selectively install just the bits you want, download the extended rom from the ftp site here, or unlock yr extended rom, copy out the cabs to main memory/SD etc, and then tap just the ones you want to install them.
If you just want rid of o2 active, then hard reset, and wait until the corporate/personal? message appears and then soft reset. O2 active is the last thing to be installed.
Nigel
mhanbury:
Hunt them down on the FTP site. Compare the version/build numbers with those in the new O2 extended rom.
Nigel
eskimofisherman said:
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Click to expand...
Click to collapse
Hard-reset your xda.
When the Personal/Corporate screen comes up, select corporate and enter 0506 - zero five zero six
This won't install active.
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
If you buy a new XDAIIs in the UK now you will get it with :
ROM Version: 1.31.00 WWE
ROM date: 12/13/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtROM Version: 1.31.139 WWE
Ive had mine for 2 days now and ive had to soft reset about 6 times! and Hard reset once!
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
irelmo said:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
Click to expand...
Click to collapse
This is really wierd. My IIs works fine - doesn't lock up, doesn't need hard resets or anything so drastic. I don't have any other apps on the device though, just the standard one's O2 supplies (GPRS Monitor etc).
What other apps are people running? I'm guessing Today screen plugins are causing grief (Pocket+ etc)
yeah I did tried my phone with no today plug in but it is still crap, was working just fine with the previous rom......... what have I done :x
At least it keeps me busy....
The problem is you should have bought a XDA IIi not a XDA IIs.
Mike

problems since ROM upgrade

I have worked in IT support for 8 years at the desktop support level. I dont understand all but can usually figure things out. I apologies in advance for being a rookie. I am frustrated with this device and need help!!
I upgraded ATT tilt to Dutty 6.1 Build 19700.duttys 6.1 about 1 month ago and Since I did this I have had a lot of problems. Build has all the goodies and more but since the upgrade I cant get any work done because I am always tweaking in an attempt to get the device working properly. I have tried to reset and reflash sevral times to start all over again but I end up with the same issues.
1. Unable to sync with active sync. I have disabled avast anti and I still am unable to sync. I also added port 990 to firewall and no good. I have re-installed active Sync 5 times. It only works when I play with it and then the device does not stay connected. It boots the connection 1 or 2 minutes after sync
2. No email apps or programs work. I tried the java versions and all. Messaging says error synchronizing and gives this message - "cannot cannect with current connection settings. To change your connection settings tap settings" My settings are OK as far as I can see. I purposely connect to media net before opening email to make sure the data connection is present. I had full blown HSDPA in NY city yesterday and no email or GPS working.
3. GPS and GPS upgrade is not working. Does GPS use its own radio? Does dutty upgrade break the radio? Not sure what is happening here as well.
4. No you tube video as usual. This has always been broken and remains broken for me. I tried installing flash bundle, codecs, etc.... No good.
I constantly get prompted the below
"cannot cannect with current connection settings. To change your connection settings tap settings"
Only thing that works is web browser.
Can someone please point me to a good solid working and mostly complete ROM for the US att tilt "kaiser". Maybe this is all I need. I have trouble finding ROM info and whether its current via the site. It gets confusing and I just want to set up once and forget, if you know what I mean. Please provide any links I might need to a fix, rom, tweak, etc..
Please help!
Steve
Steve, I updated to Dutty's ROM a while ago and all worked well until about a couple of weeks ago. I do not attribute my problems to the ROM though but rather the Tilt itself. My first issue was related to no activesync connectivity. My Tilt became an "unknown" device. Looking at my USB port from inside of the battery compartment notice bent pins. I was able to straighten the pins out but only could connect with one of about 10 USB cables that I had around. Once you have loaded Dutty's room I would recommend reconfiguring your connectivity to AT&T. You can download a CAB with all of the configuration setting on this board. Recently my touch screen would freeze up and not work well. I thought it might be the ROM but later found out there must have been some physical problem. Two days ago I called ATT and RMA'd my phone. I recieved the new phone yesterday and configured it last night. All is working well (USB and Touchscreen, new ROM, New SPL and new radio).
BTW last night saw (do a google search - I don't remember where I saw it) a revised video / flash version of TCXXXX software. With Dutty's ROM (and current) my GPS worked great. I use it with a couple of test GPS programs and TomTom on Com4. I also have an external BT GPS and it works well with that. Check to make sure your email is not configured for a proxy or local network connection.
Pete
Thanks Pete, Since this post I have gotten the GPS to work. There is a GPS app in programs\tools that has an enable option. I stumbled across it looking for answers. Ill check the pins on my cable as well.
Dutty's connections wizard actually had the wrong info for ATT america. I had to remove ID and password to get it working for Media Net so I hope the cab you reference is a newer one than is on my tilt.
I am still getting the same message for email. "cannot cannect with current connection settings. To change your connection settings tap settings"
I have to be missing something in the connection settings. I will try the cab, maybe it has been updated since Dutty's build.
Can you think of any thing in the connection settings?? Opera works but email gets error and message to check connections.
Ill let you know how that works.
Here are the essential 3 cab files you need for your Tilt.
1) fixes keyboard
-Install, soft reset, done
2) Sets At&t settings
-install, set up email but do not save your password
then do this
start>settings>connections>connections>advanced>select networks>change both drop downs to media net>click edit on both drop downs and go to proxy settings here you will uncheck everything. remember to do it to both dropdowns.
3) removes hidden proxy (which will allow your email to work if you are using a saved password)
-install, then go to your email set up and save your password.
edit: This will also allow you to update htc weather, quickgps, and a number of other programs without receiving errors.
good luck and have a nice day

GPRS not working after official HTC Rom upgrade :(

Hi,
I have a major problem. I can't get internet via gprs to work after the new 2.03 upgrade. I've tried two hard resets but nothing helps. The upgrade went fine and everything else works good, wifi & even MMS! which I think is strange since it uses gprs aswell... It sends and recieves MMS fine both with 3G, HSDPA & on Edge...
The connection wizard finds my correct settings and installs them, I've tried adding the correct settings manualy aswell. I've done it a million times before so I know it's correct. I have 3G coverage aswell since I can see the 3G on top. I don't use any static ip wifi connection either so the bug can be ruled out.
IE, Opera, Mail, Weather etc etc... nada, I can't get anything to connect. I see the arrows on top when it starts to connect and after a few seconds I get the connection error.
Please help, my phone feels worthless now...
try to get back to 1.93 and then re-flash the 2.03
Ok but is it possible installing this 2.03 again can help??? I mean so I don't have to go back to 1.93 first because I have no idea how to do it? I've not very experienced when it comes to changing roms since I always just flash the official ones...
Installed the older 1.93 again, still doesn't work
There seem to be no problem with the hardware since MMS works and uses GPRS, 3G, HSDPA & etc...
I think I give up, have to live without internet in my phone it seems
It's most likely a configuration problem rather than a hardware one.
Are you SURE the Internet access is configured EXACTLY to your provider's specifications?
Hi to all, please Owziee , did you fix your issue???
Hi, I´m from Spain and I have the same problem with my HTC Diamond. It was working very good with a cooking rom but after upgrade with the new original version from HTC don´t work GPRS connection.
I tested first with hard reset and second ,changing differents radios and spl in the way to found an answer for my problem but I didn´t found it.
I was checking the connection data from Orange for it was wrong but I saw all correct.
I created the connection manually first and automatically after it with the HTC Connection setup , but did´t work either.
Please Is there any way to fix it???.
Thanks in advanced
My problem is already solved: http://forum.xda-developers.com/showpost.php?p=3533866&postcount=2

TMUK Compact IV to HTC 2.03 ROM - connection settings?

Hi,
Before anyone shouts, I have searched the forums and read hundreds of posts but haven't found the answer! I have a stock TMUK MDA Compact IV which is, to say the least, slow and unstable. It's totally stock at the moment and I want to flash it to the latest official HTC Diamond 2.03 ROM as there are plenty of reports of speed and stability improvements.
Question - will the GPRS/3G connection settings (and any other network-specific setup I need) automatically detect or will I have to manually configure them after flashing? The TMUK stock ROM hides the connection details so I can't make a note of them - I therefore want to be sure I have all the details I need before I blow the old ROM away!!
Any help would be very much appreciated.
Cheers,
Tim
I didn't use the latest official ROM, but the previous one automatically detected the network setting after 1 or 2 minutes of being "on air". You get a notification that network settings have been found, and it will ask if you want to install them.
So i assume the new ROM does exactly the same
Hi,
Do a search on Modaco, they have a cab that gives you the T-Mobile settings.
Regards
the rom will automatically pic up that its needs settings so you select the correct option then you accept the settings and all will be fine.im on TMUK with a Diamond and everything is sweet.
Upgraded fine - a few more questions!
Upgraded fine thanks everyone. I had to select my network and it automatically set up the connections. One strange thing is that if I selected "T-Mobile" the next screen of the wizard had a different network name listed! Seems that the names and connection details are mixed up, I had to go through each network and find the one with T-Mobile's settings behind it. Think it was "Fresh" in the end!
Anyway, a couple of strange things I've noticed and wondered if anyone could help. Apart from these, so far the ROM is a big improvment on the old one.
1 - My GMail account will only download over the air if I set the account to connect using my GPRS connection - if I leave it on "The Internet" it fails to connect even though the connections are configured so that "The Internet" links to my GPRS connection! Opera works fine, so it's a messaging issue.
2 - The main problem - I can't get WMWiFiRouter to install! I had it working fine on my old ROM, but when I run the cab to install now it just sits with the progress bar on zero with the rotating "busy" symbol forever. Other cabs install fine! Any ideas?
Thanks,
Tim
Never mind!
Never mind, looks like the cab file was corrupted somehow. Copied back from my PC and it installed fine!
Thanks,
Tim

Tytn II Backlight while WLAN

Hello,
at first I would like to say sorry for my english knowledge ^^
My Problem: I have a HTC Tytn II (or MDA Vario 3 <- the name of T-Mobile) and I would like to use its Internet connection for chatting with ICQ with the program "Palringo".
Every time, when my Phone turns "off" (standby with black display) after 2 minutes of unusage the device cuts the connection to my wlan router at home.
So if Palringo has been started, the program suppresses these function and the phone is in the normal mode with the dimmed display light.
Can you tell me a program, which turns the display off without cutting the connection? Because I won't my display to be turned on 24 hours a day.
I thank you in advance very much
Advanced Config "attached"
Under:
Network\Turn Off Wi-Fi if no activity.
thanks for the quick reply
ok by installing the cab there is an error: I need a higher version of Microsoft .NET Framework than my installed version.
can you tell me which version I need?
Do they exist as.cab file because I don't have my ActiveSync at the moment.
thanks
MDA User 2 said:
thanks for the quick reply
ok by installing the cab there is an error: I need a higher version of Microsoft .NET Framework than my installed version.
can you tell me which version I need?
Do they exist as.cab file because I don't have my ActiveSync at the moment.
thanks
Click to expand...
Click to collapse
It's .Net Compact Framework 3.5
Hope that this works for you as i searched XDA for the .cab since mine is .exe for active sync.
Have uploaded to share as XDA won't allow attach.
http://www.mediafire.com/?fmqjmobmymm
thanks for the great support
I've installed both on my device, did a soft reset and did your instrucions with a second soft reset.
But the phone always still cuts the wlan connection, when the phone turns in standby mode.
I noticed no difference too before
A possibility, that I can receive text messages while the display is black would be great.
To be honest i was guessin and that looks like the option.
Kaiser Tweak does it
Also
http://pockettoolman.blogspot.com/
Bear in mind i'm using the search here as never had to always have wi-fi always on.
i have always desired this feature also but the kaisertweak and/or advancedconfig setting seems to be highly ROM dependent. i have recently moved on to wm6.5 ROMs and so far NONE of the wm6.5 ROMs i have tried can keep WIFI on in standby mode.
in my experience with some cooked ROMs, the ONLY ROM that actually achieves this feature has been SJ's HyperDragon IV Rhodium ROM (link in my signature).
another option (i have not tested this option myself) might be to use a screen off utility...i believe PSShutXP does something to that effect?!?
good luck!
NOTE: i posted detailed testing results a month or two ago in another thread that prove that the particular HyperDragon ROM i have mentioned REALLY has this behavior. search my posts and you will certainly find it!
here is the thread i mentioned with my testing results for the functionality the thread-starter desires:
http://forum.xda-developers.com/showthread.php?t=511979

Categories

Resources