Hi
I have been playing with this for a day now, and it has introduced more bugs in the wifi functionality. If you want to use WiFi from your IIs then I would avoid this 'update' like the plauge.
What you get:
- ROM: 1.31.00 WWE (13th Dec 04) so this is 2.5 months old
- Radio 1.06.00 (1.06.02 is latest)
- ExtRom: 1.31.139 WWE (no real updates to existing progs)
Whats Better
---------------
- The camera performs better in low light conditions (I used to get vertical lines on the screen
- Bluetooth stack build 3500. A vast improvement, but the latest is now build 3900 which some say solves the 'scratching noise' that is heard in some headsets
Whats Worse/Not Fixed
---------------------------
- O2 Active V3.5. Its bloody awful - spends its life redrawing the screen, its very sluggish, and adds nothing to the today screen. I never used to use the old version, but having the O2 icon was handy for its ability to list the active connections and terminate them. Much is made of the ability to change the position of the icon (which I never found to be a problem in the first place. Tapping the new icon starts O2 Active rather than listing the active connections. To list active connections, you need to tap and hold for 5 seconds. I find that after tapping and holding, I get the menu, but that the menu then fails to respond to my 'close connection' taps. I reverted back to the old O2 active program.
- WiFi. They have completely buggered it up. It was unreliable at best beforehand. I have a network at home, which I finally pursuaded the device to connect to after multiple resets. I headed into work this morning (2 AP's) switched it on, and it just sat there searching for the network. I went into Tools-->Network cards, and see the work network listed as 'connected' (it was not connected, I had not given it the PSK yet). I soft reset the device, and it finally saw the network and prompted with the usual 'Internet/Work' dialogue. I was then asked for the pass key. At this point I noticed that there is no longer a possibility to activate the soft keyboard in order to enter the pass key (A right pain in the arse when the passkey is just a random multicase/numeric key, and all you get are ** on the dialogue). Anyway, I entered the key, and the device refused to get a valid IP address. Doing IPconfig showed that the wireless card was trying to use an old GPRS IP!!! I tried a renew (3rd party ipconfig tool). I tried stopping and starting wifi. Eventually, I soft reset (still the same), so I stopped wifi, soft reset, started wifi - and *finally* it decided to go and get itsself an IP address. (this is a bug I saw in the old firmware, but its worse than it used to be).
- WiFi still marks the wrong networks as 'available', i.e at work, 10 miles from home, my home network is marked as 'available' and my work network is marked as 'unavailable' !!! (this is an old bug)
- In Network adapters, the dialogue, 'My Work Network Connects To:' is blank, and there is no longer a possibility to select work/internet (options are blank). This is new to v1.31.139 (anyone else also missing this)
- If you select a wifi connection and change it from being a 'work' connection to an 'internet' connection then the change does not stick. This is new to v1.31.139
- In the MMS applet, it is no longer possible to select a 'modem' directly. I used to be able to select 'O2 Active'. You now have to select a profile that includes an appropriate modem. This is new to v1.31.139
- When editing a network profile in 'network management' eg: My ISP. the device still forgets to display existing modem/vpn connections. (same as old version).
Out Of Date Software / missing software
-----------------------------------------------
- Photo Contacts (CallerId cab) is still version 1.17 (latest is 1.20)
- Missing O2 plus - other o2 devices include this
- Missing Intelipad
- Missing Smartdialer
- Old build of Java Midlet software
- Old build of MMS composer software
Other Thoughts
------------------
For my money, the device feels more sluggish than it did before. Though its difficult to prove this!
O2 has spent far too much time on that O2 Active rubbish - does *anyone* actually use this [email protected]?? - and not enough time integrating/testing the latest versions of CE, drivers, and third party apps.
I'll add more to this as I find new bugs, and send it all off to O2 in a couple of weeks.
What I am now using
------------------------
I am now using v1.31.139 + Bluetooth build 3900 + PhotoContacts 1.20 + Java build 1004.
----------------------------
Additions: 1/3/05
- SMS notify no longer seems to work. Anyone else suffer from this? MMS notify works fine and SMS notify is switched on. Perhaps the notify event is missing, but I have no idea how to sort this.
- VPN over wireless lan is still not possible - it tries and fails to connect. VPN over GPRS still works OK.
Additions 02/03/05
- SMS Notify problem is *not* to do with the rom update. I removed the registry key: HKLM\software\microsoft\inbox\svc\outlook since I had no need for the outlook folder in inbox. Removing this also kills off SMS notify!! I backed up, hard reset, preventing the stuff in the extended rom from installing. Installed PHM regedit, exported the outlook key, restored my backup and imported the reg key!!
- Internet/Work settings missing from Wlan setup. After restoring the backup, these had returned. Pretty strange, perhaps they were linked to the same registry key. No additional software bar the contents of the extended rom had been installed. If anyone else gets this, I suggest back, hard reset, restore might fix it.
Regards
Nigel
I have the same version with the latest radio build and cannot got the device to connect to my home Wifi what so ever.
Not exactly much use. It detects the network but refuses to connect. Either it says its connected but does not get an IP or it continously prompts for the network key.
I have also upgraded and am finding that the device often freezes when I try and switch it off, this happens about once or twice a day needing a soft reset.
I dont use the active stuff (which I never use) and am dissapointed that the O2 icon now starts O2 active rather than list the state of connections and allow you to trun them off i.e GPRS.
I agree the device does seem to be slower, I think I will be going back to the original code base and applying the BT patches, anyone know where there is a CAB installer for 3900?
check the ftp server
ftp://ftp.xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
username xda
password xda
its the file that ends in 3900.
I installed 3900 over the recent O2 update (3500) and all went fine. Just do a soft reset before playing with bluetooth or it will moan about an expired stack.
Nigel
SMS Notify
Hi
Anyone else found that the SMS notify stops working once the latest O2 update is installed. MMS notify works, but SMS does not - its damned anoying!
UPDATE: Found the reason for this see end of original post
Nigel
Thanks for the comments on the update. I think I will stay with the original 1.12 ROM! Where can you get the other updates for the Camera and Java and Bluetooth etc? I'm currently running Bluetooth 3500.
Cheers
This is why you should sell you XDA IIs on ebay and buy a XDA IIi :lol:
Well that IS a concept! Thanks made me grin!
Hi since I installed the new Rom, my clock keep on freezing. The phone goes on standby > then it freeze. If I wake up the phone , it will still be frozen.
I have to click on start > Today in order to refresh it. :evil:
Any ideas ? It's still happening with no other today pluggin. :x
Would you recommend we dont bother upgrading the ROM atm then?
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Remove entire O2 software:
You mean everything in the extended rom or just o2 active?
Hard reset, and when the message pops up about installing blah in 3 seconds (after you have done the touchscreen config) then soft reset. This gets you a plain vanilla HTC Blue Angel before the operator has installed its sh1te on it.
You can then selectively install just the bits you want, download the extended rom from the ftp site here, or unlock yr extended rom, copy out the cabs to main memory/SD etc, and then tap just the ones you want to install them.
If you just want rid of o2 active, then hard reset, and wait until the corporate/personal? message appears and then soft reset. O2 active is the last thing to be installed.
Nigel
mhanbury:
Hunt them down on the FTP site. Compare the version/build numbers with those in the new O2 extended rom.
Nigel
eskimofisherman said:
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Click to expand...
Click to collapse
Hard-reset your xda.
When the Personal/Corporate screen comes up, select corporate and enter 0506 - zero five zero six
This won't install active.
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
If you buy a new XDAIIs in the UK now you will get it with :
ROM Version: 1.31.00 WWE
ROM date: 12/13/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtROM Version: 1.31.139 WWE
Ive had mine for 2 days now and ive had to soft reset about 6 times! and Hard reset once!
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
irelmo said:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
Click to expand...
Click to collapse
This is really wierd. My IIs works fine - doesn't lock up, doesn't need hard resets or anything so drastic. I don't have any other apps on the device though, just the standard one's O2 supplies (GPRS Monitor etc).
What other apps are people running? I'm guessing Today screen plugins are causing grief (Pocket+ etc)
yeah I did tried my phone with no today plug in but it is still crap, was working just fine with the previous rom......... what have I done :x
At least it keeps me busy....
The problem is you should have bought a XDA IIi not a XDA IIs.
Mike
Related
Hello everyone,
I would like to start this new thread with a different purpose than trying to explorer the latest and gratest of releases of ROMs, extensions, software and patches.
I have tested many of the releases posted here and I have yet to find one that offer a rock solid unit that can be depended on in all situations.
What I would like is to put together a package based on the best of all available that offer the highest reliability available for our device.
It's very annoying to have to reset the device, somtimes more than one time in one day because you loose GPRS connectivety or because you turn on the WiFi card at an unlucky moment and lock up the device.
It's very annoying that you press the answer button repeatedly but have trouble picking up the rining phone.
It's very annoying that you try to make a call, but the phone keeps hanging up without making the call until you reset the phone subsystem.
It's very annoying that you pick up the device to make a call only to find that for some reason the phone has been locked up for hours with the screen on and now you are out of power and far away from your charger.
It's very annoying that your screen gets garbled and you find that you are unable to get the display back to normal without resetting the device.
It's very annoying that bluetooth more or less have turned out to be a marketing item only, since we have yet to se an implementation on the device that works (and maybe we never will)
If you agree with me or/and have experienced some or probably all of the above and have some input you would like to share on what is the best release, or have software and patched that have made a difference to you, then please contribute and maybe we could one day have a reliable operating system and software pack on our PDA that we can actually trust to handle the important task of keeping us connected to the rest of the information based world 24/7.
I hope many people will participate in this thread and that we can get to a release of software that we can all feel happy about, since it seems that none of the providers have been able to accomplish this task.
Michael
Fully agreed with you. And here is my BA config:
- MDA III with 1 Gb SD (Trandcent 80x)
- ROM 1.40 & radio 1.12
- Big storage - No Extended ROM
- Excluded nearly all software from WWE 1.40 ExtROM. Install only patched
Most apps are installed to storage :lol:
- Pocket Informant 2005 (In main memory)
- Pocket breeze 5 (In main memory)
- Pocket Player 2.6
- Sound Explorer 2005
- Pocket Navigator 2.74
- Sprite backup 3.1.4
- Mobile Pocket reader 5.0
- Total Commander 2.0
- Adobe Acrobat Reader 2.0 for PPC
- Tools: Cab Installer, vxUtils, Tascal Reg. Editor TRE 0.9, calculator, stop time ...
Full backup with Sprite backup 3.1.4, excutable archive file so that I can restore to a fully loaded system righ after hard reset. The backup is also in storage.
With this config the phone is very stable. On average 1 soft reset/week, mostly due to phone problem (I work in a building with very week GSM signal).
here here!
while ive not bothered to update for exactly one year now, i truely couldn't be bothered with the rom backup, new rom, install settings, settings restore, all to find out that... oh others are still having a problem with phones hanging/not connecting, because you used bluetooth and didn't reset before using gprs. of course, silly me!
right now i'm looking for a stable basic setup, with Tomtom 5 (bt gps mouse) and gprs useage... and possibly, using them together!
it does seem experimenting is only way to do so...
What a good idea - however, after one year of updating ROMs I do not think that there is a stable system for this device after all ...
I cannot use my Qtek for business because
- I am not sure whether I will miss a call because my Qtek somehow decides not to ring
- I am never sure whether I can finish a call decently (or the devices shuts down on its own)
And I am tired of resetting the device before and after
- using WLAN
- using BT
Currently, I am on
ROM 1.42.01 GER
Radio 1.12.00
ExtROM 1.42.116 GER
which still has all the flaws mentioned above.
This is the 4th different ROM I have installed (WWE, GER). I mainly use it for storing contact info and meetings.
A
I still wan't to try.
I'm using a configuration of 1.40 and 1.12. This is OK, but the phone app is still quite unstable and the device itself will hang. Most trouble seems to be when you press a key at an unlucky split second when the unit is trying to do something else, this often leads to lockups.
Does anyone have any input regarding the version numbers to use? Especially is 1.42 or 1.31 better than 1.40? and is 1.12 better than 1.13 or vice versa?
What about patches and registry hacks, what do you consider being a vital patch or hack to improva stability dramatically ... ? If any.
I hope to get some input from you guys that install every single thing and have gained allot of input on what works and what doesn't?
Michael
This combination seems to be vert stable for Scandinavians
I have had very good results so far with this combination:
BA_DT_WWE_NorwayRetail_14000_149_11200_Ship.exe
Then install:
86794-9090_radio_upgrade_1.15.00.zip
This is so far the bes experience I have had while I had the device.
Michael
Update
After a while, I have observed that I'm still having the GPRS connect problem and I have therefore installed the:
IA_CallerID_1.20_WWE.CAB
I will update my experience in a while. So far I like this combination, except that GPRS cinnection problem. I haven't had many other problems. There has been a little "flutter" around Blue Tooth and TomTom, If you try to start TomTom with BT disabled, you sometimes seem to grid lock until you re-boot.
Extended ROMs
Is it my imagination? The higher the extended ROM version the less stabillity? It seems to me that way. The more stuff they add, the less overall stability you get. Does anyone have a different experience?
Michael
jamcow said:
here here!
while ive not bothered to update for exactly one year now, i truely couldn't be bothered with the rom backup, new rom, install settings, settings restore, all to find out that... oh others are still having a problem with phones hanging/not connecting, because you used bluetooth and didn't reset before using gprs. of course, silly me!
right now i'm looking for a stable basic setup, with Tomtom 5 (bt gps mouse) and gprs useage... and possibly, using them together!
it does seem experimenting is only way to do so...
Click to expand...
Click to collapse
i find that when upgrading to the new WM5 roms, that all my files, programs and settings, even contacts and messages are all still as i left them, i just put the device into bootloader and plonk into the cradle, then start upgrade 2 mins later its done, all new features and nothing that is usually backed up is changed.
The best stabillity so far
I'm still running with the configuration outlined in my previous posts. And it's pretty stable, the only problems I seem to be affected by are:
After 1 to 7 days the GPRS connection fails and I have to reset the device to get it working.
Rarely some applications and the phone gets in a bind somehow, probably by starting at the same time in an incompatible way and lock up the phone. I have to reboot the device to get out of that.
The phone part itself seems to be stable and I have no missing sound or low volume issues.
I had good bluetooth functionality, but since paring my device with my GPS I can't get the device to connect correctly to my headset. I will pair up and then when it tries to connect it fails. I'm unsure what that's about. I don't use the bluetooth headset much, so I haven't been bothered much by this, but I would ofcourse prefer if everything was working as you would expect it to!
I would upgrade my base ROM to 1.42, but my testing and experiences with that have been that it's more unstable than 1.40.
I'm even more convinced now that I'm right about the extended ROM thing, the higher the version of extended ROM to more problems (potential problems).
Any input on stability are very welcome, I would love to find a near perfect configuration where most things work 100% and all the time.
Michael
I removed O2active according to this thread http://forum.xda-developers.com/viewtopic.php?t=33687. Now a few things are going wrong with my XdaIIi. I have no more connetions - my phone shows no service, and the option to turn on wi-fi is no longer present when I touch the atenna icon at the top. Also if I go into WLAN, everything is greyed out.
ALSO - my unit just resets itself approxiamtely every 20 min, for no apparent reason. This is really frustrating - any suggestions?
Hard reset your phone. When the 2i asks what type of user you are, select corporate and enter the code 0506. Download and install the O2 settins cab which can be found in the networking forum.
If you have a look around you will also find a ROM update with the O2 stuff stripped out. This has the updated radio stack with it too. You will still need to install the settings cab though.
Don't forget to back up your contacts and personal files first though.
Good luck,
Pug.
I have installed the 1.12.10 GSM on it after making backups with aWizard. I am happy to report that it does work and that it does speed up the initial connection. Before (with 1.09.11 I beleive) I could log into (enter my PIN) and would still have some time before I would connect and get signal bars. It also seemed to increase refresh rates of the bars. Now the signal is usually found before I even finish entering my PIN muchless the today screen loading.
These tests were made in my basement at my house where I typically have been getting 1-3 bars. now to test 1.13.10 and 2.8 OS to see if it works.
I will say I thought it broke at first because I couldn't get my PC to talk to it after it reloaded, then I did another soft reset and the boot screen the second time didn't list the GSM version, even though the OS did see and use GSM. I re-ran the CID unlock procedure again since I could talk to the phone again. Reset again and GSM ver was on the boot screen again.
I also swapped out the boot screen for a bmp and that worked wonderfully. my only question is if there is a way to swap out the booting screen of the OS and not just the IPL Rom.
cheers,
ET
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
ok, i updated my 8125 to the new rom and am having two issues atm. first, the phone signal icon and the battery icon on the today screen is cut off so i only see the edge icon. secondly, i cannot start wifi at all, no matter what i do :\ (it looks like it's thinking but doesn't actually turn on ) now i did apply the cingular extended rom to this so i dont know if that caused both issues or not. as for edge performance, i'm in an area with bad signal so i couldnt exactly test it. i'm going to be clearing storage tonight and see if that fixes both issues or not. i haven't tested push e-mail as clubimates servers AREN'T supporting direct push (ie they don't have SP2 installed or have it enabled on exchange).
Locked up
Well I am noticing that it is locking up if I let it sit for a while to where I can't bring it back up. I have disabled the lock code to see if that fixes it.
I would have a feeling that the problems you are having are because of the enhanced rom difference. it won't hurt to try it as is like I did since you are having problems with it.
were can I fine install
I look for the rom in the ftp but there is no RUU install of 2.16.9.101 can you please tell me where can I fin this rom
thank you
Here:
http://forum.xda-developers.com/viewtopic.php?t=42638
Scroll down to HTTP server link.
Cheers
thanks
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
after the upgrade i cant find the GPS ICON
even i try to delete the redirect string in the registry like i used to do before
still i cant see the icon on my setting page
please anyone noticed this problem ?
tx
exchguy said:
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
Click to expand...
Click to collapse
i finally fixed the signal strength icon (but don't ask me how), but wifi is still borked
no more problems, lock ups or otherwise
My guess with my problems were related to Battery Pack Pro demo. Even on the original rom I couldn't get it to work right with the assignable hard keys.
Anyway, I did not modify the original EXE one bit like darkjedi said he did. He seems to be much more advanced as I don't know how to do what he did and not that familier with its registry settings yet. But I naver had any problems with Wifi nor with icon placement.
My home wifi does use WPS-PSK TKIP using a Netgear WG302. Battery life seems good, but I do get a little crackle every now and then on my end of the bluetooth handsfree. People I talk to haven't said they hear anything other than perfect clarity. I would have been told if they heard anything since part of my reason to spend the money now rather than later was my voice and signal quality on my old Nokia was getting to be bad and they wouldn't waste a second ragging me if voice and signal problems were re-appearing. But mostly the crackle is few and far between and usually when my headset is on the other side of my body or I am a few feet away from my phone.
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
i dnt see the rush to upgrade if u have a cingular 8125 since there goa offer rom upgrades for the unit. with all the bugs i rather just get a ad2 bt plugin (wish they made it) and just do that
what roms do they offer? On my past phones I have had to have major problems before they would flash a new version of the Rom (my last 2 symbian phones).
darkjedi said:
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
Click to expand...
Click to collapse
ok... the only cab I installed for Cingular was the one I mentioned earlier. I have since installed spb power plus and their weather app and I am still stable. Not one failuer and my bluetooth is actually acting better from some reason. I was working on my car today with teh phone in the car and I was about 10 feet away without any noise or other problems.
Re: thanks
ethorn said:
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Click to expand...
Click to collapse
Is there any settings to configure edge? I only see GPRS in the connections section.
This version appears quite stable but's only my second day since upgrading my 8125 from the QTECH 2.8.7.102. I really like the Comm manager and the Push Email icon works great.
Thanks!
name of account
the only thing that I have notice so far is that the name of my celular company (I could see before upgrade) now i only see numbers.
exchguy said:
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
Click to expand...
Click to collapse
On the new imate ROM I'm getting between 65 and 110 kbps on edge. Latency is still crap at about 1.5 seconds on average, but that's what it's always been for me.
Direct push is great. Assuming you have Exch SP2 installed, push works without any other changes. I'm averaging between 7 and 10 seconds for an entry to push out after it gets to Exchange. I haven't installed the device management tools yet, but I'll do that soon and let you know how well they work.
I just noticed wifi isn't working. If I enable it in comm manager, the button is ringed in green as if it's on, but the left green led does not blink and it does not detect my open, unsecured access point. I did install the cabs from my original cingular extended rom, and one of those appears realted to wifi, but not sure what it does. I'll mess around some more and see what I can do. I'm not totally heartbroken that wifi is messed up, but it does bug me that I don't know why it aint working.
Need Cingulcustomize_No_Emails.cab file
ethorn said:
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
Click to expand...
Click to collapse
Where did you get the "Cingulcustomize_No_Emails.cab" file? I have searched everywhere and cannot find it! Help?
Hi All
I very recently purchased a Orange TyTn II from ebay and before I start to chase the seller for a refund (which might be a struugle)has anyone got any ideas how I can get the GPS working. When Tomtom, memory map or the HTC gps tool tries to access the GPS chip the right hand LED flashes every 8 secs or so but no GPS data is displayed and the software either locks up or drops out.
Also is there much Orange branding on it as this one appears to have none so I suspect it may have had a rom upgrade.
I think the version is 1.27.12.11 as that is whats displayed on the boot screen
Please Help
Go to start, settings, System Tab at the bottom and click on Device information. Tell us what you have there. Then we'll be able to tell you more. Either way I think the phone is fixable by just do a flash upgrade on it. Maybe someone else can tell you more.
Rom Version 1.1 Sleuth
Rom Date 08/28/07
Radio 1.27.12.11
Protocol 22.45.88.07h
If that helps
commanderaj said:
Rom Version 1.1 Sleuth
Rom Date 08/28/07
Radio 1.27.12.11
Protocol 22.45.88.07h
If that helps
Click to expand...
Click to collapse
You've definately got a cooked Rom there - but no worries because Sleuth Roms are great (one of my favourites), and work no problem with TomTom.
I also think the radio is fine - but I think (?) I used 1.27.12.32 with Sleuth... but before you jump in and start flashing, make sure you read lots, have hardSPL and read the WIKI.
As the phone is used you may be better off doing a hard reset before going any further. Make sure you sync and back up your data first because this will be lost. Also make a note of any installed programs because you may need to dig out .cabs for these and re-install afterwards.
As for the GPS - I posted this a while back which seems to have helped a couple of others...
1. Back up all my data, emails, sms's to my PC.
2. Make sure I have all the re-install cabs ready.
3. Flash new rom (or in your case do a hard reset).
4. Wait until rom is loaded - don't configure anything yet - and hard reset again (this is reported to make the rom run faster).
5. NEVER TOUCH EXTERNAL GPS SETTINGS.
6. Configure all things built-in to the rom (like timezone, language settings, notifications etc) BEFORE connecting to the pc.
7. Connect to pc and re-sync all my outlook data.
8. Switch off kaiser then switch on again using power button (not soft reset) - this forces any registry changes to be written to registry before the reset is performed.
9. Run quickGPS.
10. I always install and set-up my GPS programs next: GpsTEST, Visual GPSCE and TomTom.
Now to set-up GPS.
11. Make sure phone is well charged.
12. Go somewhere outside with a good view of the sky, no buildings etc - preferably no clouds.
13. Run QuickGPS again if this was first run more than a couple of hours ago.
14. Start GpsTEST. This will scan your phone and automatically set up the program for the correct com port and baud rate.
14. Leave GpsTEST running, put the phone down and drink a cup of tea or two, read a book etc - keep checking the phone every 10 minutes or so. I normally get a fix within a few minutes but sometimes 30 or 60 if sight of sattellites is not too good.
15. When GpsTEST shows as running (you'll have a number in the HDOP box and green vertical bars) the GPS is now working fine.
16. Now I start my tomtom and usually find sattellites within seconds.
17. I then ALWAYS run GpsTEST or VisualGPSCE before starting my navigation program (tomtom) because it gets a fix much quicker.
Let us know if this works and I hope it helps...
Will give it a go in the morning and let you know how I get on
Thanks
stupid eBay. At least, you got a better rom though and the person above me had great advice so use it wisely before you return a great phone.
Its still not working,
Hard Reset to start a fresh, ran quick gps, then ran gpstest, it scanned the ports and when it reached Com4 it hung,I left it for a few mins and tried to close the prog, which it did but the GPS led kept flashing, no further forwards.
Help please pretty please
Flashed Rom
Now Sleuth 3.0
Now communicating with GPS
Will see if I get a fix next
Fingers crossed
Jobs a good un
Tomtom works
Happy now
This is one of very few post's that makes you happy when you read it
I member struggle's, help is offered, problem's gone (even though the help didn't work originally )
Well done XDA
commanderaj said:
Flashed Rom
Now Sleuth 3.0
Now communicating with GPS
Will see if I get a fix next
Fingers crossed
Click to expand...
Click to collapse
Oh no!!! Now you're really in trouble... Now you can flash Roms, Your girlfriend/boyfriend/husband/wife/vacuum/favourite pet etc will now take second place to XDA and the flashing frenzy
Make sure the person you bought from had put HardSPL on the phone (go into bootloader and it will tell you the SPL version) - if not, flash it before you put any more roms/radios on.
Also, if you didn't upgrade your radio you'll probably need to because Sleuth 3.0 is a WM6.1 based rom. If you don't you may get camera and/or sound problems.
Anyway, glad you sorted it out
I loaded Hard Spl myself and the Radio was upgraded at the same time.
I have worked in IT support for 8 years at the desktop support level. I dont understand all but can usually figure things out. I apologies in advance for being a rookie. I am frustrated with this device and need help!!
I upgraded ATT tilt to Dutty 6.1 Build 19700.duttys 6.1 about 1 month ago and Since I did this I have had a lot of problems. Build has all the goodies and more but since the upgrade I cant get any work done because I am always tweaking in an attempt to get the device working properly. I have tried to reset and reflash sevral times to start all over again but I end up with the same issues.
1. Unable to sync with active sync. I have disabled avast anti and I still am unable to sync. I also added port 990 to firewall and no good. I have re-installed active Sync 5 times. It only works when I play with it and then the device does not stay connected. It boots the connection 1 or 2 minutes after sync
2. No email apps or programs work. I tried the java versions and all. Messaging says error synchronizing and gives this message - "cannot cannect with current connection settings. To change your connection settings tap settings" My settings are OK as far as I can see. I purposely connect to media net before opening email to make sure the data connection is present. I had full blown HSDPA in NY city yesterday and no email or GPS working.
3. GPS and GPS upgrade is not working. Does GPS use its own radio? Does dutty upgrade break the radio? Not sure what is happening here as well.
4. No you tube video as usual. This has always been broken and remains broken for me. I tried installing flash bundle, codecs, etc.... No good.
I constantly get prompted the below
"cannot cannect with current connection settings. To change your connection settings tap settings"
Only thing that works is web browser.
Can someone please point me to a good solid working and mostly complete ROM for the US att tilt "kaiser". Maybe this is all I need. I have trouble finding ROM info and whether its current via the site. It gets confusing and I just want to set up once and forget, if you know what I mean. Please provide any links I might need to a fix, rom, tweak, etc..
Please help!
Steve
Steve, I updated to Dutty's ROM a while ago and all worked well until about a couple of weeks ago. I do not attribute my problems to the ROM though but rather the Tilt itself. My first issue was related to no activesync connectivity. My Tilt became an "unknown" device. Looking at my USB port from inside of the battery compartment notice bent pins. I was able to straighten the pins out but only could connect with one of about 10 USB cables that I had around. Once you have loaded Dutty's room I would recommend reconfiguring your connectivity to AT&T. You can download a CAB with all of the configuration setting on this board. Recently my touch screen would freeze up and not work well. I thought it might be the ROM but later found out there must have been some physical problem. Two days ago I called ATT and RMA'd my phone. I recieved the new phone yesterday and configured it last night. All is working well (USB and Touchscreen, new ROM, New SPL and new radio).
BTW last night saw (do a google search - I don't remember where I saw it) a revised video / flash version of TCXXXX software. With Dutty's ROM (and current) my GPS worked great. I use it with a couple of test GPS programs and TomTom on Com4. I also have an external BT GPS and it works well with that. Check to make sure your email is not configured for a proxy or local network connection.
Pete
Thanks Pete, Since this post I have gotten the GPS to work. There is a GPS app in programs\tools that has an enable option. I stumbled across it looking for answers. Ill check the pins on my cable as well.
Dutty's connections wizard actually had the wrong info for ATT america. I had to remove ID and password to get it working for Media Net so I hope the cab you reference is a newer one than is on my tilt.
I am still getting the same message for email. "cannot cannect with current connection settings. To change your connection settings tap settings"
I have to be missing something in the connection settings. I will try the cab, maybe it has been updated since Dutty's build.
Can you think of any thing in the connection settings?? Opera works but email gets error and message to check connections.
Ill let you know how that works.
Here are the essential 3 cab files you need for your Tilt.
1) fixes keyboard
-Install, soft reset, done
2) Sets At&t settings
-install, set up email but do not save your password
then do this
start>settings>connections>connections>advanced>select networks>change both drop downs to media net>click edit on both drop downs and go to proxy settings here you will uncheck everything. remember to do it to both dropdowns.
3) removes hidden proxy (which will allow your email to work if you are using a saved password)
-install, then go to your email set up and save your password.
edit: This will also allow you to update htc weather, quickgps, and a number of other programs without receiving errors.
good luck and have a nice day