Related
Yes you read right. I been owning a Cingular 8125 since probably May. Ever since I got it the about 2x a month my power button decides not to work, all my phone calls goes automatically to voicemail, and my cell phone will automatically shut off from time to time. I even upgrade the rom and still no luck. So I finally got fed up after I miss 2 job interviews that I call Cingular and ask for a replacement. So I finally got the new device today but turns out my phone decides to start working again. And if Cingular sees that there's no problem they are going to charge me $400. So what can I do to disable the power button and messed up my phone even more then it is?
Just send it back to them, and tell them it's sporatic and that you want it replaced due to it not being reliable.
Hope that will work.[/quote]
honestly i don't think they'll care...
I think the main thing they look for when they receive the phone back is water damage, or damage in general...
they will take it, no need to damage your phone further... i have been through the replacement process many many many times with the 2125 and some other phones..
They don't charge you if you're phone appears to be working properly. They charge you if your phone is damaged by circumstances not covered in the warranty. You're totally fine.
Oh ok thanks. I'm going to ship my old phone tommorow.
First off, I just want to say thanks for anyone who might be able to be of some assistance. I've tried searching google and the forums but haven't had any luck. If I've missed something, please feel free to hit me upside the head with the spoon.
I've recently been having problems with my Tilt regarding charging/battery issues. http://forum.xda-developers.com/showpost.php?p=2220715&postcount=37
Here's a quick rundown of my history...
- Can use Active Sync just fine
- When trying to charge, it says charging but won't charge
- No visible damage to the mini usb plug (at least to me)
- Had accident where the usb cable was pulled out from Tilt
Now...
I recently bought a charger that will just charge the battery separately from the phone until I can get it repaired. It's working fine so far except one issue. Whenever I try to power off the device (hold the power button till prompted to turn off), it'll power off then it'll power itself back on after 3 seconds. I did a hard reset to see if that would fix anything but it didn't. The only way to keep the phone off is to take out the battery. But once I put the battery back in, it'll power on by itself. The power button doesn't seem to be sticking or anything but I guess anything is possible. If anyone has any ideas I would appreciate it very much!!!
(I'm currently running the stock AT&T Rom without any programs installed. Also, I've never had any other Rom flashed on it.)
dieneverknowing said:
First off, I just want to say thanks for anyone who might be able to be of some assistance. I've tried searching google and the forums but haven't had any luck. If I've missed something, please feel free to hit me upside the head with the spoon.
I've recently been having problems with my Tilt regarding charging/battery issues. http://forum.xda-developers.com/showpost.php?p=2220715&postcount=37
Here's a quick rundown of my history...
- Can use Active Sync just fine
- When trying to charge, it says charging but won't charge
- No visible damage to the mini usb plug (at least to me)
- Had accident where the usb cable was pulled out from Tilt
Now...
I recently bought a charger that will just charge the battery separately from the phone until I can get it repaired. It's working fine so far except one issue. Whenever I try to power off the device (hold the power button till prompted to turn off), it'll power off then it'll power itself back on after 3 seconds. I did a hard reset to see if that would fix anything but it didn't. The only way to keep the phone off is to take out the battery. But once I put the battery back in, it'll power on by itself. The power button doesn't seem to be sticking or anything but I guess anything is possible. If anyone has any ideas I would appreciate it very much!!!
(I'm currently running the stock AT&T Rom without any programs installed. Also, I've never had any other Rom flashed on it.)
Click to expand...
Click to collapse
There is an option somewhere in power settings that enables/disables the Tilt from charging when connected to a PC. This may be the cause of the first issue.
However, the fact that it won't stay powered off...I have never heard of that before it sounds like a hardware issue. If your Tilt is still covered under warranty I would get it replaced.
bengalih said:
There is an option somewhere in power settings that enables/disables the Tilt from charging when connected to a PC. This may be the cause of the first issue.
However, the fact that it won't stay powered off...I have never heard of that before it sounds like a hardware issue. If your Tilt is still covered under warranty I would get it replaced.
Click to expand...
Click to collapse
Thanks for the reply! I tried adjusting that setting along with any other settings I could find regarding power but all without any luck.
I'm pretty sure it's a hardware issue as well, but I guess what I'm really wondering is if any one can make a semi-educated guess as to whether this could be involved with my mini usb plug issue or if the motherboard is just screwed
I'd love to send it in for a replacement but of course my warranty expired 5 days before the problems started
dieneverknowing said:
Thanks for the reply! I tried adjusting that setting along with any other settings I could find regarding power but all without any luck.
I'm pretty sure it's a hardware issue as well, but I guess what I'm really wondering is if any one can make a semi-educated guess as to whether this could be involved with my mini usb plug issue or if the motherboard is just screwed
I'd love to send it in for a replacement but of course my warranty expired 5 days before the problems started
Click to expand...
Click to collapse
I'm not a hardware guru with HTC, although I have alot of experience troubleshooting PCs and Servers. I would say that it is unlikely that the USB port is what is causing the device to keep turning on.
In any event, are you qualified or ready to try an replace either one yourself (usb port or motherboard)?
There are 3rd party services that will fix the device...but they aren't cheap...it can cost $1-200 bucks or maybe more.
Are you running the Stock ROM/Radio/SPL? Or did you flash anything new?
You may want to revert everything back to defaults and see if the problem persists.
bengalih said:
I'm not a hardware guru with HTC, although I have alot of experience troubleshooting PCs and Servers. I would say that it is unlikely that the USB port is what is causing the device to keep turning on.
In any event, are you qualified or ready to try an replace either one yourself (usb port or motherboard)?
There are 3rd party services that will fix the device...but they aren't cheap...it can cost $1-200 bucks or maybe more.
Click to expand...
Click to collapse
I'm handy with computer hardware and everything but not really with small electronics. I was willing to send it to a repair shop to have the usb plug replaced in hopes of fixing my charging problems but now I'm not sure if it'll be worth it if there's a bigger/more expensive problem.
bengalih said:
Are you running the Stock ROM/Radio/SPL? Or did you flash anything new?
You may want to revert everything back to defaults and see if the problem persists.
Click to expand...
Click to collapse
I'm currently and always have been on the Stock Rom. I bought the phone as a refurb so who knows if someone here had it before me and flashed a bunch of roms . But since I've had it I've kept it running the stock AT&T rom. I also did a hard reset after I noticed the problem but it help anything.
dieneverknowing said:
I'm handy with computer hardware and everything but not really with small electronics. I was willing to send it to a repair shop to have the usb plug replaced in hopes of fixing my charging problems but now I'm not sure if it'll be worth it if there's a bigger/more expensive problem.
I'm currently and always have been on the Stock Rom. I bought the phone as a refurb so who knows if someone here had it before me and flashed a bunch of roms . But since I've had it I've kept it running the stock AT&T rom. I also did a hard reset after I noticed the problem but it help anything.
Click to expand...
Click to collapse
Hmm..yeah...refurb doesn't sit well with me.
At least the problem isn't a crippling one...since you can charge it with a stand-alone charger. As far as not staying off....that's kind of annoying, but I don't generally turn my Tilt completely off. You can always just put all the power saving stuff on to cut down on battery.
So, it seems like something you may have to live with, or pay for repairs. Hopefully someone can offer a better miracle cure than those suggestions...
bengalih said:
Hmm..yeah...refurb doesn't sit well with me.
At least the problem isn't a crippling one...since you can charge it with a stand-alone charger. As far as not staying off....that's kind of annoying, but I don't generally turn my Tilt completely off. You can always just put all the power saving stuff on to cut down on battery.
So, it seems like something you may have to live with, or pay for repairs. Hopefully someone can offer a better miracle cure than those suggestions...
Click to expand...
Click to collapse
I was a little weary of buying a refurb at first, but it was actually in great condition and worked just fine until when I accidentally kicked the cable out of it. But thanks for the suggestions. And you're right, it's still very usable, just a bit more of a hassle right now. Hopefully someone out there has something for me.
Exact same problem as dieneverknowing. I am going to try some new batteries and see what happens.
- When trying to charge, it says charging but does not charge
- bought a charger that will just charge the battery separately - working fine so far except one issue.
- whenever I try to power off the device (hold the power button till prompted to turn off), it'll power off then it'll power itself back on after 3 seconds. I did a hard reset to see if that would fix anything but it didn't. The only way to keep the phone off is to take out the battery. But once I put the battery back in, it'll power on by itself.
im having the same issue on my old tilt. i took it apart. and still no luck . no visible damage, gonna clean everything and put it back together.
was this problem ever solved. sorry for bumping an old thread. But this is my same issue.
Hey don't worry about bumping an old thread. I meant to do the same when I got my phone fixed.
Turns out it was the sync connector that had damage. I sent it to PPC Techs for this service and it made it like new. I never tried to take it apart, but I could only assume that at some point in time, one of the pins in the connector became separated from the motherboard.
thats what it looks like to me. i have it narrowed down to the board with the usb connector. but not sure yet. How much was that service. i would replace it my self if i can find that part at frys today.
Service was $80, and then you had to pay shipping both ways. I had looked into replacing it myself, but my small electronic skills aren't good enough for me to risk it on a pricy phone. I remember seeing the connector part somewhere online for $40 I believe, but I can't remember where though.
But PPC Techs had it repaired in less then 24 hrs after receiving it. And they did a great job. It feels more solid then when I had originally bought the phone.
Tried connecting my kaiser to 2 different pc's and it won't get detected. The device will charge but activesync won't pick it up. Also its not listed in device manager! I tried disabling/renabling advanced network functionality as well has soft reset the device several times. I'm on the verge of hard reseting BUT when i put my device in bootloader mode it only says serial.. will not say USB as its supposed to
any help would be appreciated.. i'm on death v4 rom btw.
thanks in advance!
fone_fanatic said:
The device will charge but activesync won't pick it up.
Click to expand...
Click to collapse
Can you get an activesync connection via Bluetooth? When you inspect the extUSB connection can you see anything which looks wrong (such as a wire sticking out/in more than the others? What happened preceding this problem?
If you hard reset the device I don't see the relevance of the bootloader. It'll just restore the original image from where it's tucked away in the devices ROM. If it was working fine straight after you installed the ROM thats on it now and doesn't work after a hard restore then that points towards a hardware failure. If you have to go down the path of restoring to a different (original) ROM for returning purposes, there are ways of doing this with a microSD card - although I've not tried. I think the wiki would help there.
bluetooth activesync is working, i did a hard reset and nothing. Flashed to romeos via microsd and now its acting all strange.
After it completed the flash from microsd, i soft reset the device and it rebooted backinto bootloader.. i removed the microsd and soft reset several times and it kept going to bootloader. I attempted to hard reset as well and same thing, would go to bootloader. Removed the battery for a couple minutes and still same thing. Plugged it into USB with it off and it turn on by itself and go straight to bootloader. Unplugged the USB cable, took out the battery and put it back in, then plug the USB cable back in and this time the orange light came on as if charging and it finally booted up. The above has happened to me previously on my hermes but that was when the battery was extremely low, my battery level is currently at 97%!
now its booted into the freshly flashed rom and still same thing... charging but not being recognized by the PC... i've checked the usb port on the device and everything looks fine.
I'm lost at what to do now....
This might be a stupid reply but I had the same problem. My cable was busted so you could try another cable.
I am in the same situation here
Tried it with 3 different PCs with 3 different cables.
It's charging, Active sync pickes it up and trying to connect but fails to connect.
The only think I can come up with, I used new charger in the car. May be it killed the port
Is there any way to find out for sure?
i tried 2 cables with 2 different pcs... its only charging it and the computer won't detect the device at all. Nothing under usb in device manager.. even in bootloader, it only says serial not usb. I've downgraded to a shipped AT&T rom and Radio through the storage card but i still need to downgrade the SPL before i attempt to get a warranty exchange. IS that possible to do with through microsd yet?
I'm having the same issue. The usb port charges the phone fine with the USB cable, but teh computer does not detect the device. I also tried the headphones and they work fine as well. Help!
Update: I just tried a different usb cable, and now the computer recognizes the device, but as an unknown device.!!!!!
fone_fanatic said:
bluetooth activesync is working, i did a hard reset and nothing. Flashed to romeos via microsd and now its acting all strange.
After it completed the flash from microsd, i soft reset the device and it rebooted backinto bootloader.. i removed the microsd and soft reset several times and it kept going to bootloader. I attempted to hard reset as well and same thing, would go to bootloader. Removed the battery for a couple minutes and still same thing. Plugged it into USB with it off and it turn on by itself and go straight to bootloader. Unplugged the USB cable, took out the battery and put it back in, then plug the USB cable back in and this time the orange light came on as if charging and it finally booted up. The above has happened to me previously on my hermes but that was when the battery was extremely low, my battery level is currently at 97%!
now its booted into the freshly flashed rom and still same thing... charging but not being recognized by the PC... i've checked the usb port on the device and everything looks fine.
I'm lost at what to do now....
Click to expand...
Click to collapse
Have you tried these steps?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync-usb.mspx
ajay6780 said:
Have you tried these steps?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync-usb.mspx
Click to expand...
Click to collapse
Thanks for that suggestion but still no dice
The computer isn't detecting the device at all! Usually when a usb device is plugged in you can go to device manager and look under USB and see it there, but its not showing up. I've scanned for hardware changes several times and nothing.
I've now tried on 3 different computers (2 pc's and 1 mac) with 2 different USB-MiniUSB cables and nothing!!
i guess i'll just go to the at&t device support center tomorrow and hope they'll replace it on the spot and notice that i've changed the SPL...
can i ask for the people that are having this problem to do the following.
With your device unplugged from the PC open device manager. (Right click My Computer -> Properties -> Hardware (3rd tab) -> Device manager) Then expand the last tab (Universal Serial Bus Controller) and plug in your device.. if it doesn't show up then click actions -> scan for hardware changes..
I just want to make sure if your computer is detecting your device or not..
just an update with my situation. i went into the att device service center today and told them my problem... the guy behind the counter had no clue what he was doing. he just looked at it like a monkey for minutes then swapped it out for a new one. no questions asked even though it was hard spl'd, cid unlocked, and sim unlocked.
but now this device's vibration is really weak and i lost my invsishield protection on the front (kept the battery cover and my ppctechs scren protector)
Busted? or just won't work
Hi all,
I have been coming to these forums for a little while and only posted a couple of times. I felt this was important. I was having the same problem. Tried the cables, resets, ROM changes the works. I have had my at&t tilt htc 8925 for 36 days when I reported the problem to them. But it actually started about 10 days before. At&t tech support was very rude and accusatory when it came to them "helping" me. I, like probably all owners of a phone like this treat it like gold. It is very important to me. So when I contacted tech support and was told it was probably abuse or I had "buyers remorse" (I don't want to return the phone I just want it fixed!?)
The best they can do and they do not budge on this is for me to return the phone for an exchange. BUT, and this is a BIG AT&T but, the phone they exchange it with is refurbished. Something someone has returned. I do not want a phone that has been returned. I want mine fixed. "This is my phone, there are many like it but this one is mine" Know what I mean? When I bought the phone the guarantee was "we'll just replace it with a new phone" and I like 1000's of others did not ask if that "new phone" was refurbished. It is. Now advocates will tell you as they did me, refurbished is actually BETTER than new. Huh? Then why aren't all phones sold refurbished ones? And if they are so great, take mine back, give me one of those "crappy" new phones and give mine to someone who wants a sweet refurb. I am outraged by the whole mess.
I have searched forums and complaint sites. The bad usb port problem is NOT an isolated incident. There are a lot of people with the same "it charges but won't sync" problem. This is a known problem they refuse to address. Their stand, send in for refurb.
Personally I would like to see a recall fix class action against at&t. It can be fixed but they just don't want too. I thought I would be relatively safe buying for a huge company. They spend millions on advertising to simply leave their customers twisting in the wind after 30 days. Very bad business.
That's the rant. So I decided that if the warranty was useless anyway I'd take a shot at it myself before sending out for repair myself. There is a place in California PPC Tech http://www.pocketpctechs.com/main.asp?area=home that will fix the usb for $79 and ship it back to you in a few days. They seem to be reputable and a lot of people are opting to fix this problem themselves.
How did I fix mine? by altering the mini usb end of the sync cable. I tried other cables and connectors but I think it has something to do with the contact points. The only way mine would work was if I plugged it in, wiggled it slowly and with a little bit of pressure at times, around until the screen brightens. That means it has made a connection, then don't move. Hold very still. It took both my hands. Wait for what seems like 2 mins and it would start to sync. Based on this. my repair (before I send it to California for repair, which I may end up doing anyway) is make sure the plug on the phone is straight and not damaged. If you can get the phone to sync this way you may be able to crimp the mini end of the usb very very slightly to make the connection you are manually doing by wiggling it around. It took a lot of small tweaking but it now syncs about 29 out of 30 times. That's about as good as it gets.
So good luck to us all. If you can't get it to work yourself send it out west to PPC Tech. In this economy the phone companies like at&t better start getting their customer service back on track before they have no customers to service, It has happened to the biggest before. Wake up AT&T! The days of the business model of massive turnover and new signups is coming to an end as people tighten their belts. Treating current and future users poorly is a sure fire way to put yourself out of business.
here is my gift to you all..
http://forum.xda-developers.com/showthread.php?t=362679
read this post and check EVERY SINGLE LINK in the first post...i had this issue and i ended bending my usb plug every which way until finally i broke the plastic seperator off and in turn smashing the second pin from the left on the top off (the one in charge of activesync) over and over until it broke...i didnt really care i could still flash by sd but then i smashed the + power pin and so i was on the phone with att for many many hours explaining to them that its a known issue to users but not to the company and they finally sent me a replacement..i should have just searched my butt off before trying to deal with a problem/fox it myself (yes i dissasembled it and soldered the pin back on and it broke off multiple times causing me to dissasemble it many many times and smashing it again and i ended up getting alcohol on the water damage void pad which i replaced) learn from me...if you ever have ANY problems that are significant..dont try fixing JUST GET A REPLACEMENT...who cares if its a refurb..if the refurb sucks then send it back until they send you a new kit...after 5 returns you get a new kit soo just keep sendin back them refurbs until your happy
oh and to make it easy on yourself because if you tell att you have a usb problem its NOT covered under warranty and will take you many many hours like me to convince them otherwise (which someone eventually will understand because certain people ARE familiar with this problem at ATT it just depends who you get and how many times youve been elevated in support)..what you need to do is IF YOU CAN return your spl back to stock (if you manage to get a long enough connection with activesync) but if not dont worry too much att doesnt really check spl just that you have the shipped rom on there so load the shipped rom (found on here) on your sd and flash back and just make up some excuse that it isnt working right and youl get a replacement or if you can get the spl revrted jus throw your device in bootloader by a failed flash (pull the usb out during flash) and say its stuck in the funny colored screen lol
jaysjob, i've been dealing with ppctechs for a long time (probably since '03-'04) they're very reputable and highly recommended. They actually got the contract to be the authorized repair center for I-Mate about a year ago.
But why would you pay $79 for something where u can get a complete replacement? Yah it might be a refurb but my device that i turned in was all scratched up from drops.. the images on the start, ie, and messaging buttons by the d-pad had scratched off.. and now the device i got looks brand new (i actually think it is a new one but i never asked if it was a refurb or not)
pazookie, what your saying is true.. always take advantage of the warranty if you have it. If you dont and you want to repair it yourself, know what your doing! I'm very handy and have done many lcd replacements and other various repairs on cellphones (nokias, HTCs, sony ericsson, samsung, motorola, u name it!)
My little brother has the n82 and he bought the black case, I told him to wait for me and i'd help him do it but he got impatient and he thought it was gonna be a simple swap. He ended up breaking his LCD doing it which set him back $80!
anyways i'm happy now with a new device but i'm gonna go back tomorrow and get it replaced again because the vibrate is extremely weak!
fone_fanatic said:
jaysjob, i've been dealing with ppctechs for a long time (probably since '03-'04) they're very reputable and highly recommended. They actually got the contract to be the authorized repair center for I-Mate about a year ago.
But why would you pay $79 for something where u can get a complete replacement? Yah it might be a refurb but my device that i turned in was all scratched up from drops.. the images on the start, ie, and messaging buttons by the d-pad had scratched off.. and now the device i got looks brand new (i actually think it is a new one but i never asked if it was a refurb or not)
pazookie, what your saying is true.. always take advantage of the warranty if you have it. If you dont and you want to repair it yourself, know what your doing! I'm very handy and have done many lcd replacements and other various repairs on cellphones (Niki's, HTCs, sony ericsson, samsung, motorola, u name it!)
My little brother has the n82 and he bought the black case, I told him to wait for me and i'd help him do it but he got impatient and he thought it was gonna be a simple swap. He ended up breaking his LCD doing it which set him back $80!
anyways i'm happy now with a new device but i'm gonna go back tomorrow and get it replaced again because the vibrate is extremely weak!
Click to expand...
Click to collapse
Hi fone
Thanks for the reply.
Yes, I agree with you. If the phone has something else that is messed up like you were saying a scratched screen or buttons. It's just that I am as careful as I can be to keep the phone in nice condition just to send it back for maybe one that someone didn't take the same care of.
Mine works good now. I think it has something to do with when I crimped the cable end. It make a tighter fit. I think that may be the key to mine and others problems. For sure it is becoming more and more clear that there is a design flaw whether att wants to acknowledge it or not.
Thanks for your input about PPC too. If I do end up having to fix it that's probably the way I'll go if that is still the only thing wrong. Otherwise it's in for the warranty as you suggested. I KNOW I'm not that smart.
Im having this same issue and it is definately not a cable problem.
tayloryork said:
Im having this same issue and it is definately not a cable problem.
Click to expand...
Click to collapse
if u think its a hardware problem then take it to a service center. The guys there just follow step by step guides on how to diagnose phone issues. For me he saw a crack in the usb jack on my device and just replaced it. If you send it in to HTC i think theres a higher risk of them figuring outu the device is hard spl'd and wont honor your warranty.
tayloryork said:
Im having this same issue and it is definately not a cable problem.
Click to expand...
Click to collapse
taylor, I'm not saying it is a cable problem. I am saying it is a hardware port problem. I "fixed" mine, probably temporarily, by crimping my usb cord so that it holds more firmly in the port. I did say if you have the same problem and you use the same test I did ie: move it slightly, Gently, not like others I have heard stories of where they ram it from side to side until it snaps off, that you might be able to do what I did. I thought others with the same problem might be able to use this workaround until at&t figures out it is not an isolated incident with thousands of people having the same problem thats all. Hope this helps.
jj
I had a similar problem. Phone would charge fine, but windows didnt even recognise anything was plugged in. Interestingly the bootloader changed to USB when the cable was connected, and Serial when unplugged.
As it turns out (thanks Flying Kiwi for suggesting the obvious I had overlooked) the middle top pin was recessed too much into the plastic guide, so I stabbed it a bit with a scapel and all is well.
So it seems that the Serial/USB section of the bootloader cant even be trusted.
Recently the usb port on my Tilt broke. I can't sync, and I can only charge the battery when out of the phone in its own cradle charger. I just noticed the speaker wasn't working and tried a soft reset, bootloader. Some of the broken usb contacts were touching, fixed that, reset, bootloader. Am I going to have to hard reset? Will it do that with a fresh battery and no AC connection?
yes you can hard reset without it being connected to charge. Just make sure the battery is adequately charged because you dont want it to die in the middle of a flash.
I had a similar issue, broken usb and had to flash to a shipped rom and spl to turn it in for a warranty exchange. So everything can be found on these forums, just read up on flashing from SD card.
good luck
Thank you, that answered the one question I could not find an answer for. From everything else I've read on this forum I believe I know how to proceed. Although if I am not able to get a warranty exchange I am willing to have ppc techs fix the usb. I am a super noob to the forum so please no one jump down my throat about where this is posted. I really have no idea what I am doing. I have read in other threads many issues that could be attributed to a usb port breaking... now mine seems to be no audio along with charging and booting problems. If I get the usb fixed will my audio come back?... Will it boot without needing to be plugged into charger? I am scared... help.
Good stuff
wyllie666 said:
Although if I am not able to get a warranty exchange I am willing to have ppc techs fix the usb. I am a super noob to the forum so please no one jump down my throat about where this is posted.
Click to expand...
Click to collapse
What ROM, Radio and SPL is on the device (the wiki explains how to find out these details and will be very reassuring reading if you take your time - there's lots of good stuff there)? If it's all HTC official and still within warranty then you can just get them to sort it out and no hard reset or flashing will be required by you (although back up anything of value before sending it away because they'll be sure to flash or hard reset it). If it's the audio pins that are shorted then that'd explain the lack of sound. Sometimes the speaker can fail on the device but this is also something that can be replaced under warranty. In short there's nothing to be scared of because these are all fixable. I'd be carefull about using it or powering it on while the audio pins are crossed and when you get it back be very gentle when plugging/unplugging the phone from its cradle or using the usb port. I've had my TyTN II for 15 months including lots of USB port use and have never had a problem with the port. I keep it clean and make sure things are plugged in gently and straight on.
Most everything is stock, I've only done shell enhancements. HTC Home Customizer, Kaiser Tweak etc... Nothing more than registry changes. Thankfully my sound came back today. I charge the battery out of the phone in its own cradle... the only time I have to use the usb port is when I boot. When I put the battery in I also have to insert the charger as I turn it on, otherwise it gets stuck in bootloader and I have to remove the battery again.
Anyway... I think the phone is fine aside from the broken port. I'm ok with sending it off to ppctechs... It's $79 plus return shipping right? I've found a site that sells the port for $8 but I can't solder it myself, and don't really know anyone who can. By the way they also sell stock replacement batteries for $12. I'm only willing to do this because I've been told by AT&T that they don't care, and HTC said it wasn't covered by warranty. I think I've read on here though that people have gotten them replaced, by AT&T and HTC... So I just shouldn't take "no" for an answer?
wyllie666 said:
I think I've read on here though that people have gotten them replaced, by AT&T and HTC... So I just shouldn't take "no" for an answer?
Click to expand...
Click to collapse
You got it! Make sure to uninstall the 'customisations' or hard reset so HTC cant claim your software configuration voids your warranty. IF they say it's not covered why? What happens when you mention you're aware of many people experiencing similar problems which tends to point towards a design vulnerability or manufacturing issue?
Got my new Tilt today. Free hotswap.
Bought G1 recently and rooted it to final release CM6. All good until charged it from 1000mh charger - then screen lost all functionality (maybe co-incidence). It recovered itself with re-boot and time. Now, even with charging from USB, screen died again and won't come back to life. Have tried wipe/re-flash but no change. There a several posts from others with same problem - but no solutions that I've found. The implications are that it's a hardware problem? I've spoken to HTC who say phone still in warranty - however rooting voids warranty. Questions are then: suggests to fix the problem? If h/w problem, then any instructions for taking the phone back to stock so that HTC will repair?
Thanks guys ...
I'm going to take my chances and send this off to HTC under manufacturers warrenty ... they may tell me to get lost as it's been rooted, or because it's actually a s/w problem. Hope not. When I turn the phone on it still synchs to my gmail account - actually in gmail on a PC it tells me I'm not logged in anywhere other than the PC session. If I change my gmail password - guess this should make sure the phone can't synch? Reckon I'll get a San Franisco if the G1 can't get repaired. Shame as I like the QUERTY and I like the G1. Still happy for any thoughts on my problems (at the moment I'm using some Nokia from ten years ago - would like to get going again soonest).
I void my warranty twice and still sent the phones back and never got charged a dime.