Database Develop

FTouchFlocube complete

i found this file in trinity forum. it works perfectly. some of it is in french and some of it is in english. can someone help to clean up.
it is the complete cab including ftouchflo, schaps config, and cube all in one cab file. just install and use.

woow, does it work on any Device ??

I installed it, nothing shows up in the today screen. I've tried to play around to make the cube show but nothing happens.

it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.

herg62123 said:
it works on my tilt. to use cube start right above th middle of the bottom task bar and go quickly to the middle of the screen. if this doesn't work then start from one side and go across to the other side quickly.
also configure ftouchflo from 100 timeout to 200 and gesture waiting delay from 10000 to 700 and try the above it will work.
i have an at&t 8525 and tilt it works on both devices.
Click to expand...
Click to collapse
Nice it work after I configure it.
EDIT: Anyway to change it from Spanish to English?

Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools

ladytoast said:
Yup - works for me too. Nice work.
The language change doesn't bother me so much.. silly question - where to you change the settings though?
EDIT: scrub that, found it in a strange named folder in programs
herramientas = tools
Click to expand...
Click to collapse
Haha yeah herramientas mean Tools in Spanish.
I had to remove this program because it was messing up with the slide 2 unlock program.

Sensational find, well done

The program works great and has a huge coolness index factor....
I tried to set the photos to open a file in the storage card and would not do it. Is it limited to opening files that are only in the device memory? Can it address files in the sorage card?
Nice program overall.

English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668

taiseer999 said:
English version;
http://forum.xda-developers.com/forumdisplay.php?f=260# HTC TouchFLO Cube Ctrl D/L http://forum.xda-developers.com/showpost.php?p=1667725&postcount=44
You might need to install SDKcerts.cab first http://forum.xda-developers.com/attachment.php?attachmentid=52302&d=1190920271
and finally FTouchFLO configuration tool http://forum.xda-developers.com/showthread.php?t=345668
Click to expand...
Click to collapse
Well, just un-installed the Spanish version and installed this. Appears to work perfectly, I can't see any problems at the moment. I had to rename the FTouchFlo folder so that the configuration tool would work but other than that this was too easy.
First class work!!

go into config cube and all word editing done from there.

found 6 side cube vista like and settings to change the programs

herg62123 said:
found 6 side cube vista like and settings to change the programs
Click to expand...
Click to collapse
.... but not working on Kaiser!
TQM

Hi,
just one question: does the TouchFLO CUBE work on the TYTN II ?
I heard that on Tytn II it needs a cooked ROM not just a sw on top of already installe TouchFLO.
Could somebody tell me something ?
Thanks in advance

works perfectly after configuring it, gotta get use to the spanish though but i guess im taking it as a humor thing LOL

hi i have problem with the ftouchflo after installing it .....
i do have a problem with the text on mine, i mean in office words and messaging,
I cant select the text (that is to use stylus click drag a paragraph of text) to be copy and paste or something like that.......... i cannot select the whole text...maybe u can help me?? this applies in excel,words, messaging, notes, task ...but in appointment i can select a few text.......................also in resco explorer, normally i can click drag and select a few files to multiple delete (and no i dont wanna use the multi seelect, its extra buttons..)
and btw i have added all the above mentioned files intothe config for exclusion of scrolling and stuffs..........so maybe u can help me? thanx alot

I think the touchcube thing is cool, but i would rather it only works on the homescreen, its just annoying anytime else, when trying to do daily activities and you bring up the cube or minimize the program. can this be done?

i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?

fluxs2 said:
i hope you guys wont shoot me on the 26th of december. but i cant install this cube cab :]
I have a dutch vario III so instead of the folder "program files" i have the folder
"programmabestanden". I copied all the important folders (config and cube) to "Program Files" but still i get the error: cant find the config file.
I even read the config.txt. file through windows and changed the link also to ..\Program Files\.. but nothing happens.
Can someone help me with this annoying situation?
Click to expand...
Click to collapse
deinstalled everything for the third time.. did a reinstall.. copied all the folders again to "PRogram Files" and guess what... IT WORKS!!!

HKLM/Security/Phone/Skin - Please export

I need someone to export HKLM/security/phone/skin from their phone. I'm trying to determine what keys were lost on phone when I was trying out some skins. If you could export (or copy/paste) the reg key and the sub-keys that would be awesome. Please post the attachement or the code to this thread...
thanks

enabled 1(0x000001)
ext \windows\phcanhtc.dll
Does that help? Or do you need sub directories also?

grizzley said:
enabled 1(0x000001)
ext \windows\phcanhtc.dll
Does that help? Or do you need sub directories also?
Click to expand...
Click to collapse
I really need the subkeys. What I'm trying to figure out is why my call history and speed dial buttons are using the default icons instead the ones actually in the \windows directory. I've verified that skin's icons are n the windows directory but when I view the phone app, the buttons are back to default (for call history and speed dial only).
If you could export or copy/paste the 'portrait' subkey that would be very helpful.

Here you go. Need more? Let me know.

grizzley said:
Here you go. Need more? Let me know.
Click to expand...
Click to collapse
thanks.....
What phone and OS did this come from?

AT&T Tilt / WM6

grizzley said:
AT&T Tilt / WM6
Click to expand...
Click to collapse
Have you done any phone dialer skinning on this phone? or is it the original phone skin?
I've got a bunch of text color reg entries so maybe that's the cause...

I did install the black HTC dialer but removed it long ago. I didn't think about that when I exported it... sorry!

grizzley said:
I did install the black HTC dialer but removed it long ago. I didn't think about that when I exported it... sorry!
Click to expand...
Click to collapse
no worries....
I made a backup of that key, tehn removed everything that wasn't on yours... rebooting, I'll let you know what I find.

Damn, still got the default buttons.
Griz, can you check your speed dial and call history buttons. Anyway you can snap a screenshot to show what your buttons look like?
BTW.. thanks for all your help on this. If we find a fix I know many threads that will benefit from this....

I don't know if you will be able to see this, I dont have a screen capture app on my phone so I used a camera...? If it's bad, I will load a screen capture app and retake a picture for you. Or maybe you need to see more of the screen?

actually I need the speed list screen and the call history screen. Here's a good & free screen capture util....
Install this from your pc, then assign the magicSS application to a button, go to the screen you want to capture, press the button, save the file. When you are done, reassign the button to the previous setting.
Application credits go to Lou ........ http://www.louterrailloune.com/?page_id=7

OK, how is this?

the 3rd one is what I was looking for...
hate to tell you this, you have the same issue. look at the image used in the call history button in the image above. Now, view the actual files that are used for those images in the /windows directory. The files are:
spd_lst.gif
clg_in.gif
clg_out.gif
clg_missed.gif
The above files should look different then the above image. Do they?

This is what I see in /windows/clg_in.gif

-- scratch that...

that should be the image you see when viewing call history inbound calls, as you can plainly see from your screen shots, what's in the windows folder is not what is being displayed in the phone app.
And here's the kicker, at one point it did match. The image you show above (clg_in.gif) is what my original call history buttons display like. Even on some of the skins I tried, the speed dial and call history buttons skinned properly. I just notice that it won't do it anymore.
Either a registry entry has changed (or been lost) or there's some sort of OS icon cache issue.
The only reason I don't think it's registry related is that those files are usually treated differently when skinning the phone dialer. Most skins will create a folder with the replacement images, then the install will change the registry to display the images in this new folder. These 4 files never get put into the new folder, they always get dropped directly into the windows folder, overlaying the ROM file. Also, I've never seen any registry entry for these images. I would think that the registry entries (if they existed) would be under the reg key mentioned at the start of the thread.

grizzley said:
OK, I never noticed that these were wrong icons. But it's an easy fix. Just replace the ones that are in the /windows dir with the ones you want.
Is that what you are after?
Click to expand...
Click to collapse
yes that's how it should work, but it doesn't.... it's displaying a set of icons bulit into to the phone app...

Is this what you are after?

grizzley said:
Is this what you are after?
Click to expand...
Click to collapse
Yes, how did you get it to change?

Vibrate while dialing a Phone Number

First of all I love my new TyTN II and XDA-Developers!
Question: Anybody know of a hack or a .cab that will make my touch pad numbers vibrate when I dial a number? This way I know when I've pressed a touch button on the display - had it on my MDA Compact II and loved it!
PS: I've attached the two .cab files I use to have, but they don't work on the Kaiser...

frikibabi said:
First of all I love my new TyTN II and XDA-Developers!
Question: Anybody know of a hack or a .cab that will make my touch pad numbers vibrate when I dial a number? This way I know when I've pressed a touch button on the display - had it on my MDA Compact II and loved it!
PS: I've attached the two .cab files I use to have, but they don't work on the Kaiser...
Click to expand...
Click to collapse
it's a bit of a work, but the result is great!
Description Add a small vibration for every key pressed when dialing the phone. Improves tactical feedback.
Type Registry Tweak
Instructions Using a registry editor navigate to the following keys and follow the directions. Do this for each of the listed registy keys
1. Rename Standard DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf#
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf*
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf0
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf1
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf2
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf3
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf4
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf5
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf6
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf7
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf8
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf9
Notes A softboot is required
to change back to the default function, go back through the list of registry keys, delete the "sound" entry, and rename "sound1" back to "sound"
note: the * needs to be entered in the value for "*vibrate*"
This tweak really makes it easier to know that you have pressed a button when dialing on the touch screen
have fun!

here's the cab.

very good
there is a delay until the vibration begins,
if you are used to tapping the numbers quickly..
otherwise GREAT find
thank you
regards
krassen

To be clear...
There is a delay when you push the first number. After that the vibe is almost instantaneous.
At least on my Tilt.

dgduris said:
To be clear...
There is a delay when you push the first number. After that the vibe is almost instantaneous.
At least on my Tilt.
Click to expand...
Click to collapse
same with me...not even worth installing... i dont dial that slow..

Amazing Tool!
The initial delay doesn't bother me...
Simple to install & simple to use!
Big Thanks!

I installed the program and it works great when you are making the call initially...but call is connected and I tried to key in (like entering numbers on an automatic response system), it doesn't vibrate.
Normal?

when i try to download say " compressed file is invalid or corupted" ....?

bobcho10 said:
when i try to download say " compressed file is invalid or corupted" ....?
Click to expand...
Click to collapse
i receive the same message when trying to unpacking the zip

is there a way to do this on every key press like on the lg viewty this works very well on that handset

bobcho10 said:
when i try to download say " compressed file is invalid or corupted" ....?
Click to expand...
Click to collapse
works fine for me. this is the .cab file. drag it into your phone, and run it from the phone and it should install.
do not unzip the cab prior to install. just dl it, drag to phone, open from phone, and it should install fine.

portos03 said:
i receive the same message when trying to unpacking the zip
Click to expand...
Click to collapse
same thing with me

From a previous thread on this, I thought that the cab version had the delay but the direct reg edit method was virtually instantaneous, but I haven't verifed this.

I installed it, was working about half the time (key presses) , then I deinstalled it. Now the standard "Options" for key tones (short tone, long tone) do not work and the keypad is not very accurate. Is there a way to correct for this?

portos03 said:
i receive the same message when trying to unpacking the zip
Click to expand...
Click to collapse
dont unzip on ur desktop, send it to ur pphone and open it with pocket rar and then install the cab.

rico002 said:
dont unzip on ur desktop, send it to ur pphone and open it with pocket rar and then install the cab.
Click to expand...
Click to collapse
thanks rico, decided not to install it after they fixes the "bugs" with delay...

the delay doesn't bother me too much, seems to be an issue with the first number pressed. I backed up after dialing a number and it had the "delay" when I started the new number. cool little cab. thanks

RemE said:
From a previous thread on this, I thought that the cab version had the delay but the direct reg edit method was virtually instantaneous, but I haven't verifed this.
Click to expand...
Click to collapse
i did it with the reg edit method, and there is no delay...
it took me about 5 minutes then, so whats that comparing to a lifetime?

Sorry but dont quite understd the registry method.
You mean :
1. Rename Standard DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf#
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf*
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf0
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf1
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf2
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf3
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf4
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf5
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf6
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf7
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf8
HKEY_CURRENT_USER\ControlPanel\Sound1\Dtmf9
Notes A softboot is required

How to change the main menu soft button?

Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!

I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in

Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function

or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry

awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!

Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.

tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.

i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want

was it:
"FdcSoft SoftkeyAppletEx.cab"

Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...

mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it

ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing

Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.

Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.

seems it doesn't work with wm6. after installing it, the program isnt available in my program.

Another SIP when stylus out

New version at:
http://forum.xda-developers.com/showpost.php?p=2622590&postcount=45
Old version
I'm make a small program, which change current SIP when stylus out of the case and in the case.
Just unzip, and run program. Run again, and you can stop background process.
Settings in registry:
key HKCU\Software\HtcExtFun
value StylusInSipName - string name of SIP when stylus in the case
value StylusOutSipName - string name of SIP when stylus out of the case
example of reg settings (included in attached archive):
Code:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"StylusOutSipName"="Keyboard - VGAKEY"
"StylusInSipName"="TouchPal"

Sorry I messed up im such an idiot!

And would it be possible to change the diamond in some kind of explosive device if the stylus is pulled out and in five times in less than three seconds ?
Hmmm James Bond on TV tonight, sorry for that.
The real question was : what do you call SIP : is it any program ? Does it interfere with the "notes" opening during a call ?

SIP = "Soft Input Panel"
It's the method of inputting text on a ppc, such as keyboard, transcriber etc...
Thanks a lot exidler, I've been missing this feature

My question is will it interfere/conflict with a SmartSIP application? I'm not in the mood for a Hard Reset just now due to conflicting SIPs...

Hello,
Nice idea but when I execute the HtcExtFun.exe I received this message :
"can't initialize SIP CLSIDs for stylus status"
My Rom is HTC_FRA_1.93.406.1
Thank's for you help

ralfred said:
Hello,
Nice idea but when I execute the HtcExtFun.exe I received this message :
"can't initialize SIP CLSIDs for stylus status"
My Rom is HTC_FRA_1.93.406.1
Thank's for you help
Click to expand...
Click to collapse
Just change the registry keys to whatever SIPs you use. You probably don't even have a "Keyboard - VGAKEY" installed.
2ALL: Also be sure to input localized names for SIPs into reg keys (for non-WWE ROMs). Good luck!
Btw, it works just fine with SmartSIP...
Good job, exidler! Thank you. It's just what I wanted. Will probably uninstall SmartSIP now...

At begining of topic, asking about runing Notes when stylus pulled out.
My question: may be add feature to run something when stylus pulled out? Not only when call in progress.

exidler said:
At begining of topic, asking about runing Notes when stylus pulled out.
My question: may be add feature to run something when stylus pulled out? Not only when call in progress.
Click to expand...
Click to collapse
Would be a nice addition, but I'd prefer it to be user-configurable (on/off), with a list of exceptions. So each time I'm about to rename a file it won't open Notes or whatever.

help stylus
for open the program???
[HKEY_CURRENT_USER\Software\HtcExtFun]
"StylusOutSipName"="Keyboard - VGAKEY"
"StylusInSipName"="TouchPal"
hello graziano

WOW Fantastic app thanks
I Repackaged it in a cab file that adds the reg key to change between Compact QWERTY and Keyboard. Also drops a shortcut under
Start Menu>Programs
Jules

Video of the software here. I think its great, but could obviously do with a configuration panel and having a shortcut dropped into \windows\startup.
http://wmpoweruser.com/?p=739
Surur

ZaJules said:
I Repackaged it in a cab file that adds the reg key to change between Compact QWERTY and Keyboard. Also drops a shortcut under
Start Menu>Programs
Click to expand...
Click to collapse
Really nice, but the shortcut doesn't work.

peterbonge said:
Really nice, but the shortcut doesn't work.
Click to expand...
Click to collapse
It only worked for me after a soft reset, and then starting the app once.
Surur

To have it start at every boot up, paste the app in /Windows/StartUp
Very convenient app, they should have implemented this in the original ROM .

Awesome!...
It worked after I add ZaJules's Reg file.
But I want to be able to switch between:
Compact QWERTY and Fitaly by textware.
I edited the reg location (in windows registry) from keyboard to fitaly
now removing/replacing stylus doesn't do anything...
cheers, stevo.
[edit] Maybe it's called something else in the registry...
[edit] fixed it.
I had "Keyboard Qwerty" insteat of "Keyboard QWERTY", so it IS CAP specific!.
cheers, swesome.... This bl00dy phone just gets better and better every day...!

Updated the cab to include the automated startup

GREAT small application, very handy indeed.

re not go
error on startup
saluti dvdfilm

when using the exidler....cab I got an error while starting up. It seems the application is missing a reference. When I start it manually I get an error about missing reference in registry.
I use original Rom 1.93GER