Okay, i just flashed RomeoS 4.1 onto my AT&T tilt. How do I get my 3g data connection back? I can use my LAN WIFI to go on the interent, but not the 3g line. There has got to be something simple I am missing! help
Did you run "Connection Setup".
I don't have RomeoS ROM, but it should be here:
Start>Settings>
>Connections Tab
>Connection Setup
run that and it should set up the correct settings for your network.
The other thing you may need to do is:
in the same place as the "Connections Setup" there should be a "Connections" Icon.
>Connections
>Manage existing connections
>Proxy Settings
>make sure "this network uses a proxy server to connect to the internet" option is UNCHECKED.
I hope that does the trick for you. It the only thing I can think of.
Run HTC Connection setup and DISABLE proxy
thanks for your suggestions, i will try this today!
still doesn't seem to work. I would assume that every single time anyone flashes a new rom, they have to setup their data connection again, right?
It'll work for sure, as suggested above, use Network Wizard or the HTC Connection tool, both do the same thing and the cabs area available on XDA-Dev.
And yes if you re-flash your ROM you'll need to set your Data Connection settings again as they are formatted when you ROM upgrade.
I had the same issue when i installed that rom, theres a cab called Cingular PDA Medianet mms and one called wpbear_AT&T_proxy there on this site if i wasent on my phone i would link you
wpbear_AT&T_proxy
Click to expand...
Click to collapse
Don't like it... however pending on your flash history and what you installed you may have to check a reg entry
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
If it reads TNETW12511 you're OK
downloading those cabs worked like a charm! thank you very much!
Related
Can anyone get their cingular internet (edge) to work?
yea.. i did. you just have to extract the files from the Cingular EXT Rom. It includes a CAB to enable Edge and the Edge icon.
*In the attached EXT ROM, Signed_Edge_Icon is the Icon itself, and EONs is the cab that actually enables Edge. Install EONs first then the icon.
~Stefanelli~
Thank You !!!!!
Okay, I installed both like you said and it still does the same thing. When I click on IE, it says it can not connect with current connection settings. To change your settings, tap settings.
Is there a setting I still need to change? How do I access the edge icon you were talking about that.
Have you tried running this cab file?
peter2oo2 said:
Can anyone get their cingular internet (edge) to work?
Click to expand...
Click to collapse
am I supposed to do something after I install the cab file or is it supposed to work automatically?
You have to make sure that you have the correct settings in!
Go to Connections, then to advanced. Tap 'Select Networks'. Create a new connection profile, name it MEdia Net.
Then tap Modem and tap...
Create New
(name it Cingular)
Enter a name for the connection. From the "Select a modem" drop-down, select Cellular Line (GPRS).
Tap Next.
In the "Access point name" field enter wap.cingular.
Tap Next.
Verify the following profile settings, then tap Advanced:
Username: [email protected]
Password: CINGULAR1
Domain: Blank
Verify the following settings and tap Ok.
Use server assigned IP address: Selected
Use specific IP address: Unselected
Use software compression: Unchecked
Use IP header compression: Checked
Tap Finish.
Tap Ok.
Give that a try.
Just so you know... Those settings are for Cingular users... not AT&T... so if you are AT&T tell me and I'll give you settings for that... but what you have said tells me you are Cingular. Hope I've helped.
I am cingular.
okay, when i attempt to connect to the internet, it says the answering modem has disconnected. to check your connection settings, go to settings...bla bla bla.
Is the password "CINGULAR1" was the 1 and caps typo?
no it should be caps and there should be a 1 at the end.. the settings i gave you are directly off the cingular support site.. so they should work..
-Stefanelli-
Oh good GOD, I was the one with the typo. I was typing WPA (like the encryption) instead of WAP. Thanks for the help. I'd buy you a beer if I could
If you simply run the cab that golfernutnflorida posted all those GPRS settings are there.
I'm on Cingular and I'll be damned if I had to put those settings in by hand the numerous times, sometimes daily, that I flash a new experimental ROM!
In other words, I keep that exact cab on my SC.
Exactly! The less I have to put in under a Rom Flashing, the better.
Dr Puttingham said:
If you simply run the cab that golfernutnflorida posted all those GPRS settings are there.
I'm on Cingular and I'll be damned if I had to put those settings in by hand the numerous times, sometimes daily, that I flash a new experimental ROM!
In other words, I keep that exact cab on my SC.
Click to expand...
Click to collapse
Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...
Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html
I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?
Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!
It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live
Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!
Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.
app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...
Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference
I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...
Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.
Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks
Anyone managed to get Foxtel (or even Telstra My Place) working on a Kaiser / Tytn II?
I've attempted to install Default_i-mate_MyPlace.cab (with or without Telstra_V5.5.CAB) from http://forum.xda-developers.com/showpost.php?p=1719900&postcount=63 but it fails to install, reporting nothing other than "Installation was unsuccessful".
I've tried this straight after a factory reset too. The ROM is the default one it shipped with - 1.82.707.0 WWE (11/03/2007)
From what I've seen posted by others, it 'should' be as simple as installing the MyPlace cab then changing a registry setting, but I'm not having any luck with even the first part!
Anyone run into similar problems, or able to assist?
prk.
telstra cab
If you install the latest Telstra ROM then use schaps utility to unlock the extended ROM and copy the contensts somewhere you can then install the TELSTRA 5.5 cab. You will probably also need another cab called Default_Imate_AUS_HR_V3.60.00.cab. I have SCHAPS 4.01 FULL with both of them installed and everything is fine. Contrary to some threads I have flashed heaps opf ROMS and I love my JASJAM, being a tech nerd of course.
Finally got Foxtel working on my Kaiser (Tytn II) with Telstra NextG.
The main problem I ran into was when downloading the files from http://forum.xda-developers.com/showpost.php?p=1719900&postcount=63 I was right clicking and selecting "save as". This doesn't work, as the link heads off to Rapid share, where you have to click free, then wait a while, etc. Silly me.
In case anyone's interested (or for the next time I reset):
1) Install the Default_i-mate_MyPlace.cab (approx 70k)
This gives the "My Place" option in the Programs list. When I ran it and tried to go to any of the options, it would connect, then timeout on finding location.
2) Ensure the Telstra Internet connection is using a proxy:
Start / Settings / Connections / Connections
Under "Telstra Internet Settings" select "Manage existing connections"
Under Proxy Settings, tick "This network uses a proxy server ..."
Advanced / HTTP
Set server to "10.1.1.181" and port to 80
Okay out.
At this stage I could now go to the various locations in Telstra My Place. Except Foxtel which gave an error about not having a compatible phone.
3) Change the User Agent by editing the registry.
The key is \HKLM\Security\Internet Explorer\User Agent\CustomBase
I changed it from: HTC_P4550 Mozilla/4.0
to: i-mate JASJAM V2 PPC; 240x320; HTC_TyTN/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
Now I could load the foxtel link. When I tried the free service, streaming media told me it couldn't connect.
4) Configure streaming media:
Start / Programs / Streaming Media
Menu / Options
Set "Connect Via" to "Telstra Internet Settings"
Voila - Foxtel now works.
prk.
prk said:
Finally got Foxtel working on my Kaiser (Tytn II) with Telstra NextG.
The main problem I ran into was when downloading the files from http://forum.xda-developers.com/showpost.php?p=1719900&postcount=63 I was right clicking and selecting "save as". This doesn't work, as the link heads off to Rapid share, where you have to click free, then wait a while, etc. Silly me.
In case anyone's interested (or for the next time I reset):
1) Install the Default_i-mate_MyPlace.cab (approx 70k)
This gives the "My Place" option in the Programs list. When I ran it and tried to go to any of the options, it would connect, then timeout on finding location.
2) Ensure the Telstra Internet connection is using a proxy:
Start / Settings / Connections / Connections
Under "Telstra Internet Settings" select "Manage existing connections"
Under Proxy Settings, tick "This network uses a proxy server ..."
Advanced / HTTP
Set server to "10.1.1.181" and port to 80
Okay out.
At this stage I could now go to the various locations in Telstra My Place. Except Foxtel which gave an error about not having a compatible phone.
3) Change the User Agent by editing the registry.
The key is \HKLM\Security\Internet Explorer\User Agent\CustomBase
I changed it from: HTC_P4550 Mozilla/4.0
to: i-mate JASJAM V2 PPC; 240x320; HTC_TyTN/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1
Now I could load the foxtel link. When I tried the free service, streaming media told me it couldn't connect.
4) Configure streaming media:
Start / Programs / Streaming Media
Menu / Options
Set "Connect Via" to "Telstra Internet Settings"
Voila - Foxtel now works.
prk.
Click to expand...
Click to collapse
Hi im extremely new to this stuff.and sorry for the Noob question.
I am upto the part of the registry key. I cant seem to find the registry key that i need to change it. Could you give some type of instruction on this. Ill keep searching in the mean time.
Thanks for your help
Frank
Got it going. Thanks. Had to reset unit.
Big thanks
I-Mate Cab Installation
Hi,
could anyone please tell me (or point me to a link) how to install Cabs on an I-mate 9502.
I need to access Telstra's Myplace after installing windows 6.1.
I have downloaded the appropriate cab onto my pc, and then transferred it to the storage card on the 9502, but I cannot instal it onto the 9502.
I am a beginner with the 9502, and would appreciate any help.
Many thanks
Paul
Hey it's ok. I finally worked it out!
Cheers
Pauyl
Hey Pauly,
what did you do? I just got 6.1 and am lost. I got the configurator cab (correct one?) off the imate page but little does it config. No My Page or Foxtel etc. BTW I couldn't find a My Place cab.
Teddo
I have an unlocked T-mobile MDA Compact Iv (aka Touch Diamond) which is now on O2 with a web bolt on. I've configured it as per the instructions from O2 but I can not get the internet to work.
If I select IE, input a web address it says 'cannot connect'.
It does come set up with T-Mobile Web N Walk and when I go into connection settings it says T-Mobile Internet 'this connection is pre-configured and can not be modified' but it does allow me to add a new modem connection (which is what the O2 instructions say to do).
I'm guessing its trying to use the pre-configured T-mobile settings. How can I get it to use the new O2 connection I've just set up?
try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab
You may wish to look at the link in my signature if you're using the HSDPA (3G) connection from o2 UK.
idrisito said:
try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab
Click to expand...
Click to collapse
Thanks. Can I install that straight on to my phone. Its still running the original T-mobile themed ROM. Should I back anything up first or will it just install a new app (which app is it).
I've found this on the forum -
Advanced Configuration Tool 2.1.0.0 [cab, 396 KB]
http://htc-diamond.sosref.com/downlo...ol_2.1.0.0.cab
Was this the one you were refering to.
dont bother with that cab just tried it on mine ! installs but doesnt work
the other point, No im not refering to advance config! i wll try to look for it again! in the meantime may be some else can find it for you
Managed to get it working.
If you go into Settings-> Connections->Connections
It say 'T-Mobile Internet. This connection is pre-configured and can not be modified'. You then have 'My Work Network' which is were I added the O2 settings but this wasn't working.
If you click the Advanced Tab and then 'Select Networks' the first question is 'Programs that automatically connect to the internet should connect using -' and there is the choice of T-Mobile Internet (the default) and my Work Network. By changing this to 'My Work Network' it will pick up the O2 connection I have added under Work Network getting round the pre-configured T-Mobile settings.
is it possible to connect to WPA Enterprise networks via WiFi? because I'm searching for a ROM which would allow to connect to the network on my university, which runs the following configuration:
SSID: eduroam
type: WPA-Enterprise
key exchange scheme: TKIP
authorization: EAP-PEAP-MSchapv2
IP: via DHCP
I tried it with the Energy ROM from the forum, but it doesn't allow me to enroll the certificate or it doesn't want to accept it. the other way round it doesn't allow me to enter a user name, I can only put in my password.
could somebody give me a hint what to do? I was searching the forum, found some registry hacks, but none worked
Try to change:
HKLM\\Comm\TNETW12511\Parms\WPAMixedMode
from 1 to 0.
ok, I tried it, but still the same happens:
I enter everything in the configuration menu of the comm manager, click 'next' and then I have to choose a certificate to log on - a little bit lower is a button called 'Enroll', which does nothing when hit. When I try to click 'done' it says that I have to enroll a certificate, so there's only cancel left ...
still doesen't work
well ... can somebody help please?
//edit:
well, as it seems nobody really knows how to work that out ...
Because I'm at my university every two weeks for the weekend, I'll be able to test this way of trying to connect to the WPA enterprise network in a week. but perhaps somebody else can confirm or obey this workaround:
Connect your device to your desktop/laptop and when WindowsMobileDeviceCenter (Win 7: just type the name in the search field in the start bar) opens go to Mobile Device settings >> More >> Get Device Certificates >> I know What Certificate I need to Enrol >> User ... then click enroll. Watch your device as you will be prompted to install the cert. Follow the prompts and after a few seconds you're done. When you setup your wifi connection choose PEAP and enter all the needed information.
Click to expand...
Click to collapse
It's help I got from microsoft social answers, perhaps somebody can try that out ...?
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
jones23 said:
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
Click to expand...
Click to collapse
yes, indeed, I understand german
thanks a lot for this tip, it looks a little bit different on a customized ROM and stuff, but in general it worked - I'll try it on friday or saturday, then I'll be at my university and able to give feedback!
when it'll work, I'll post a translated how-to in this thread...
sorry, I wasn't able to establish the connection with the tip by jones23 ... perhaps it works with WPA2, but not here ...
Hello,
what is the status of this? Did you find a solution?
I have the same issue since I flashed the EnergyROM.
Any ideas?
unfortunately it's truely not possible, I wasn't able to connect to the configuration from the first post using the HTC Diamond II ... damn thing!
but I'm gonna try this weekend something different: imho it's just a software problem, it's got nothing to do with hardware ... so I'm gonna try a dual boot with android and connect with that, perhaps this will work. I'll give feddback
ok, during clicking around on the device I found the solution:
Comm Manager -> Settings -> WLAN -> Network Cards
Here you can ignore the certificate and enter login data for the WIFI network.
Hopefully someone else can use this information.
@ taschenuhr
thats great to hear
@ others
perhaps you can use a notebook for testing purposes, since the connection & login data is the same. there's a windows (mac) version of that same client software.