Database Develop

Cingular (AT&T) Video in the States

Has anyone been able to get onto AT&T's (Cingular's) Streaming video site with their unlocked TyTN II here in the States?
http://cingularvideo.cingular.com/
It does not detect the phone as a 3D phone, or so it says.
I had no problems getting to the http://device.home/ page though.

I just get a blank, white screen.

doesn't work for me either... Same error. Not a 3G phone.
-Mc

isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
This link has a 8525.cab that allows you to get technical difficulties (for me at least, i don't have wireless.cingular.com:80 set as proxy)
http://www.gadgetech.info/treo/hacks/registry/
shogunmarks cab with realplayer could be your huckleberry too
http://forum.xda-developers.com/showpost.php?p=1095177&postcount=51

doesn't work for me either.

zetajunkie said:
isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
Click to expand...
Click to collapse
I dont remember the exact change (been a while) but yeah look in the Hermes forum....also you will find MANY threads so look for the newer ones as ATT and WM6 went through stages of what works for this. It is a PIE issue.

Read into the first dozen posts or so:
I don't live in a 3G area so I can't test...
http://forum.xda-developers.com/showthread.php?t=282651
-Mc

I got it too work, no problem. Below are my instructions.
TyTN II Users
Here are the instructions for access MediaNet and Cingular Video, or just about any at&t/Cingular link just like on the Tilt.
It’s really simple to access MediaNet. Even on at&t branded phones you have to switch from My ISP to MediaNet so you can access the MN home page or Cingular video. Here is how you do it.
Go to START, SETTINGS and select CONNECTIONS.
In the connections, select CONNECTIONS Icon.
At the bottom, select ADVANCED tab.
You will see a SELECT NETWORKS option.
Under Network Management, change the first option for MY ISP to MEDIANET.
Now click ok and reselect TASK (bottom left tab). Now your Connections now say MediaNet with a proxy option below it. We need to verify the proxy info is correct.
Select edit my proxy server, then select Advanced. You will see a window with server/proxy info. The first one is HTTP. It should have the following (wireless.cingular.com:80). If it doesn’t, select HTTP and enter the info. Now check SOCKS. It should have (LOCALHOST:1080). Again, enter it if needed.
Now you’re done. You only had to do this one time. When you done with MediaNet, all you do is switch back to MY ISP for normal surfing.
Before you continue, you have to make a change in your registry so that the proxy knows your phone as a branded phone. I choose the Tilt for this.
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0
This is what is listed for the Tilt
Save your settings and that’s it. By changing that info on my TyTN II, I am now able to access Cingular Video and MediaNet home page. I had to change my connection from My ISP to MediaNet so it would go through the Proxy.
I can now access my account information and a bunch of other areas I wasn't before on my TyTN II.
Cv http://cingularvideo.cingular.com
MN http://device.home
Note: In order to play the videos, you can download a PocketPC version of Real Player since the files are in RM format.

Does your HTTP setting stay?
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet. I went back to the http setting and learned the http setting to wireless.cingular.com is not there anymore. Looks like it doesn't want to stay there.
I changed my registry to make it think I am using an AT&T Tilt instead of the HTC TyTN II.
Can anyone help?

Got It Working
I only had to do this on my HTC ADVANTAGE...
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0

MEdia Net Proxy info
I believe that the proxy info for the MEdia Net as ISP is hard coded into the ROM as it was for the Hermes.
So all you would really need to do is revise the "model" info for PIE in the registry to what they said earlier.

Do you need to do something to get RealPlayer to stream the video? I'm able to get to the video pages, but when I try to play them, they download instead (wow, there goes all my RAM!)
I did find that this only works in IE, my Opera browser still gives the error page for Cingular Video.

Read what I posted here. http://www.mobileplanet.com/ft.aspx?k=99281
When you select a video to play, it downloads a video.ram file, which contains nothing but a URL. Real Video opens this video.ram file, reads the internet URL, and then plays the video from that URL.
Note: Each time you select a video from the web site, it'll download and overwrite the last video.ram file you downloaded/saved.

Okay, changing the network settings on RP seems to have fixed it.Thanks for the great guide!

victorcho said:
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet.
Click to expand...
Click to collapse
Check your e-mail accounts. POP/IMAP accounts allow you to set the connection they will use. If they don't match "Media Net" and go out to check e-mail, you'll get this error because the mail doesn't think the network's available.
There's also a setting in RealPlayer to specify the network that I had to manually change. Once I did all that, I was watching The Colbert Report clips on my phone.

ha im an idiot i was getting the temp difficluties screen but i was connected to wifi took it off and im fine that was dumb but i just tried a video and got failed to connect! lol well ill see if i did somethign else dumb lol
switched the real player settings to mn and were all good

That fix worked for me! I am able to surf/check e-mail while using the MediaNet connection - is there any real need to switch connections all the time? It seems about as fast as my non-proxy connections, but perhaps it isn't.

i can get the list of videos playingm, but when i click on it to watch it, it says " can not connect" real player......how can i change this

any still having problems with real player here u go
Go to ur tmp-file folder (normally "C:\Documents and Settings\%username%\Local Settings\Temp\"
u will find quite a lot of folders in there, but if u search (f3) for files ending with *.cab there will pop one file named:
"realplayer.cab" ^^
copy it to ur ppc by using active sync
this worked for me hope for u too

I have tried all of these things and it still tells me the clip is unplayable.

Trying to get Vodaphone Live to work on HTC branded TytnII

Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony

Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.

kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...

Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'

nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html

I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?

Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!

It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live

Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!

Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.

app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...

Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.

The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference

I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...

Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.

Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks

How do i get my data connection back..

Okay, i just flashed RomeoS 4.1 onto my AT&T tilt. How do I get my 3g data connection back? I can use my LAN WIFI to go on the interent, but not the 3g line. There has got to be something simple I am missing! help

Did you run "Connection Setup".
I don't have RomeoS ROM, but it should be here:
Start>Settings>
>Connections Tab
>Connection Setup
run that and it should set up the correct settings for your network.
The other thing you may need to do is:
in the same place as the "Connections Setup" there should be a "Connections" Icon.
>Connections
>Manage existing connections
>Proxy Settings
>make sure "this network uses a proxy server to connect to the internet" option is UNCHECKED.
I hope that does the trick for you. It the only thing I can think of.

Run HTC Connection setup and DISABLE proxy

thanks for your suggestions, i will try this today!

still doesn't seem to work. I would assume that every single time anyone flashes a new rom, they have to setup their data connection again, right?

It'll work for sure, as suggested above, use Network Wizard or the HTC Connection tool, both do the same thing and the cabs area available on XDA-Dev.
And yes if you re-flash your ROM you'll need to set your Data Connection settings again as they are formatted when you ROM upgrade.

I had the same issue when i installed that rom, theres a cab called Cingular PDA Medianet mms and one called wpbear_AT&T_proxy there on this site if i wasent on my phone i would link you

wpbear_AT&T_proxy
Click to expand...
Click to collapse
Don't like it... however pending on your flash history and what you installed you may have to check a reg entry
[HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN] = " \\ Windows \\ WLanMgr.exe " "DeviceName" = " {98C5250D-C29A-4985-AE5F-AFE5367E5006} \\ TNETW12511 "
If it reads TNETW12511 you're OK

downloading those cabs worked like a charm! thank you very much!

How To : Update internet settings pre loaded

Hi,
I've got ROM 1.38WWE with the current Telstra pre loaded software on the device. Everything works fine, included autoconfig and some other tools posted on here, (many thanks for them!)
What I can't do is edit the internet connection setting, the device says "this connection is pre-configured. It cannot be modified"
The reason I need to modify it, is to add a setting that will setup my direct push technology, so I can wirelessly sync with an exchange server. On the imate, once you add this setting everything works fine but here I cannot do it?
Any suggestions?

You will need to install a registry editing software, I used PHM RegEdit.
Once installed use the find function on "Telstra Internet"
and set the ReadOnly value from 1 to 0
It will be somewhere in :
HKEY Local Machine > COMM > ConnMgr > Providers > Random String eg. {7C4B7xxx
> Connections > Telstra Internet
Edit:
What setting did you need to change? i didn't have to change anything for my setup of exchange synchronisation on my Telstra TD.
I did notice however that I couldn't access pop3 and live messenger on the default proxy, having instead to change it to 10.1.1.181 - this allowing telstra WAP access/internet browsing/pop3/live messenger/exchange, but the Touchflo weather app has been "intermittently" working since... still nutting that one out.

big_chunuts said:
Hi,
Any suggestions?
Click to expand...
Click to collapse
Honestly you best bet is to drop the Telstra Rom and load Duttys rom.
You wont look back....

MDA Compact IV - O2 GPRS Internet

I have an unlocked T-mobile MDA Compact Iv (aka Touch Diamond) which is now on O2 with a web bolt on. I've configured it as per the instructions from O2 but I can not get the internet to work.
If I select IE, input a web address it says 'cannot connect'.
It does come set up with T-Mobile Web N Walk and when I go into connection settings it says T-Mobile Internet 'this connection is pre-configured and can not be modified' but it does allow me to add a new modem connection (which is what the O2 instructions say to do).
I'm guessing its trying to use the pre-configured T-mobile settings. How can I get it to use the new O2 connection I've just set up?

try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab

You may wish to look at the link in my signature if you're using the HSDPA (3G) connection from o2 UK.

idrisito said:
try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab
Click to expand...
Click to collapse
Thanks. Can I install that straight on to my phone. Its still running the original T-mobile themed ROM. Should I back anything up first or will it just install a new app (which app is it).
I've found this on the forum -
Advanced Configuration Tool 2.1.0.0 [cab, 396 KB]
http://htc-diamond.sosref.com/downlo...ol_2.1.0.0.cab
Was this the one you were refering to.

dont bother with that cab just tried it on mine ! installs but doesnt work
the other point, No im not refering to advance config! i wll try to look for it again! in the meantime may be some else can find it for you

Managed to get it working.
If you go into Settings-> Connections->Connections
It say 'T-Mobile Internet. This connection is pre-configured and can not be modified'. You then have 'My Work Network' which is were I added the O2 settings but this wasn't working.
If you click the Advanced Tab and then 'Select Networks' the first question is 'Programs that automatically connect to the internet should connect using -' and there is the choice of T-Mobile Internet (the default) and my Work Network. By changing this to 'My Work Network' it will pick up the O2 connection I have added under Work Network getting round the pre-configured T-Mobile settings.