Related
Hey gus,
New to this forum. I was trying to upgrade my ba from 1.22 to 1.4 and somehow I think I got stuck in the bootloader screen. I downloaded the rom directly from clubimate. My problem is when I run the rom it gets stuck when it tries to upgrade the radio. Now my phone is totally non working, it starts once in a while but only to the bootloader screen.
Any advice would be great.
Thank you guys.
jksour said:
Hey gus,
New to this forum. I was trying to upgrade my ba from 1.22 to 1.4 and somehow I think I got stuck in the bootloader screen. I downloaded the rom directly from clubimate. My problem is when I run the rom it gets stuck when it tries to upgrade the radio. Now my phone is totally non working, it starts once in a while but only to the bootloader screen.
Any advice would be great.
Thank you guys.
Click to expand...
Click to collapse
Try following this instead..
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Let me know how you get on..?
Cheers,
I am downloading right now. Is it easy to switch the language?
thanks
Thank you for responces, but they did not work.
OK, I downloaded the dutch 1.42 rom version. I also downloaded the country code error program. I ran it and I got the same exact thing as I did with the 1.4 rom directly from imate. The problem is: when the rom program is about to update the radio it freezes and returns an error 114 something like radio update error. I don't know what to do, and of course my phone is not usable.
Please if you have any advice tell me.
thank you
Hey guys,
I finally fixed it. I read somewhere that if you delete the radio.nbf and the ms.nbf files and then try to update it will work. So I did, and now my phone is working again.
Thank you.
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
What operator are you on? All of the recent ROMs do not work on Orange UK. The phone and txt message functionality is broken.
As for not showing the ROM version, this always happens after a crash. Just reset again as soon as you see "NONE".
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
opps,thats all rom's since mid november
TEXT,PHONE BLUETOOTH WIFI.
Read The Wiki
NeCrOpHiLiCaT said:
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
Click to expand...
Click to collapse
not being funny, but there are a few pages in the Wiki that can help.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home : explains all about WM5 on a BA
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5 Gives you STEP BY STEP instructions how to go back to 2003
NeCrOpHiLiCaT said:
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
Click to expand...
Click to collapse
Before you complain that users cant help you, try helping yourself. You will find that people are more willing to invest their time then!
realkinguk said:
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
Click to expand...
Click to collapse
Wierd, you are the first to come forward to say that it works fine for you. Myself and a couple of other users haven't been able to get reliable telephony for months now. It may be a regional thing, perhaps only in Scotland. I've had replacement phones and I still have problems.
No one seems interested in helping as it's not something that can be easilly tested unless you have the problem yourself.
i was looking for hte downgrade link ill give that a go tomorrow, as tot he person that said i should try helping, how can i help if i dont know anything? we all need to learn and start somewhere. think ill be staying away from here with my spvm600 if thats the attitude this place is takeing.
Hey, it wasn't intended at you, obviously. What I was basically saying was that if you have the same problem, then don't expect a fix as it's a tough one to fix.
could it happen that you are one of those who downloaded the rom which someone had the gall to replace the original one? which rom upgrade did you use?
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
NeCrOpHiLiCaT said:
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
Click to expand...
Click to collapse
use one of the latest (i.e. helmi's or xplode's) and upgrade again. be sure to follow the instructions (including that for device data, and the no/yes/yes input). make sure also you were able to download the whole file (it was a problem for some users).
you might also want to upgrade your radio version (1.15.00).
good luck.
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
I just bought new Diamond already HardSPL-Olinex 1.40. Unfortunately, it keeps restarting especially when I turn on the Wifi or send/receive the SMS. I already bought new battery and update new official ROM from HTC but it doesn't work.
Do you have any solution? Please help me
Mmmm...
The most obvious question is have you done a hard-reset? Did you hard-reset immediately after installing the ROM? If not, that's probably the issue
grahamkdt said:
The most obvious question is have you done a hard-reset? Did you hard-reset immediately after installing the ROM? If not, that's probably the issue
Click to expand...
Click to collapse
I am quite sure after installing ROM, I did hard-reset. I even do soft-reset after that. However it still not work.
Does anybody have any idea??
Hi,
Yeah, i got a idee,
install HardSPL-Olinex 1.93
get the latest officeal radio rom. install it.
reflash the rom you are using.