Database Develop

Big Time Panic!!! Help please!!

I am not sure what I have done. I have a cingular 8125 G4. Downloaded the Risidioro g4 rom upgrade and my phone was not probably CID unlocked. Thought that did not matter cause I was able to install Mr Clean ROM couple of months back. I read some users in the forum who successfully upgraded from Mr Clean.
Everything went nice and smooth, the upgrade completed 100% and when it finished and rebooted it stopped at the blue, red screen and got stuck there. I did soft reset, hard reset but every time that blue, red screen comes up and gets stuck.
Has my phone become a "nice but dead piece of furniture" ? Oh! man..that would devastating!
Please help!
BigMonty

All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!

Got another guy who successfully got out of the jail by having a SD image. Do you think it would work for me too? If it works where can I find it? I already e-mailed the guy, seems like a nice guy, let's see if he replies.
http://forum.xda-developers.com/showthread.php?t=274471&highlight=dead

Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.

Btw,
Spl 2.25.0001
Ipl 2.25.0001
Can somebody suggest what would be most suitable ROM to go for once I am in the bootloader screen?

Vilem said:
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Click to expand...
Click to collapse
Thanks a lot Vilem for your reply. Yes I see a USB connection..but I guess we can't get to activesync because the OS did not load yet. I had the Mr Clean ROM installed and I tried to go for it but failed. What should I do now? Go for the original shipped Cingular ROM?Anybody knows which version it was and where can I find it?

bigmonty said:
I see a USB connection..
Click to expand...
Click to collapse
Means connected, try it. Mine crashed a couple of times like that and managed to get it going again.

You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?

bigmonty said:
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
Click to expand...
Click to collapse
try the last succesful.

bigmonty said:
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Click to expand...
Click to collapse
Bigmonty - after getting into allsorts of issues after trying to upgrade my G4 to various 3.2 based ROMS, i also got to the bootloader screen with the USB indicator in the righthand corner.
This worked for me - take the battery out for an hour or so, put back in and soft reset. make sure you have a good charge. reboot the PC and plug in the device.
Now the only ROM i can recover a working device from isto use the latest ROM from the phone supplier. in my case from the club i-mate site (my device is SIM unlocked).
hope it helps

Thanks AirWol. I was able to go back to Mr Clean successfully, which was a great relief. What I was doing wrong was, I was using the wrong update utility of Mr Clean. I should have used the one which was modified according to Risidioro guide for use in g4 chips. But I was using the original Mr Clean instead.
BTW, anybody knows whether it is possible to update g4 phones to the latest Risidioro or Cingular 2.26 ROMS? That is, can I modify according to Rididioro guide for use in g4? Anybody?
Probably I haven't learned enough lessons yet!

Help! Unlocking? to upgrade to wm6

Hey guys.
i just wanner say first im a noob at phones so dont flame me.
Right, i got a brand new t-mobile compact 2 (htc charmer) with t-mobile rom on it. i really wanner upgrade to Windows mobile 6 so badly but i cannot flash my rom cus it aint unlocked.
So i tried doing it myself with the unlocker this website suggests, but that always fails .
What i think happend is this mda has been updated to the latest t-mobile rom. Which is:3.8.2.21 WWE and the unlocker is only for the old versions.
I actually dont know im right at all. but if anyone can get back to me either by pm, email or If you know your stuff please dont hesitate to add me on msn, and talk me though it. trust me its alot easier to do that then wait for thousens of emails.
Anyway any help will be amazing. remeber im a noob so please dont flame me, i just want to be able to experince the mobile 6 that all you guys are.
Email/MSN: [email protected]
Thankyou so much everyone. I hope you can solve this problem.
Oliver Pole

You don't have to unlock your phone to flash WM6. Considering you've already flashed the latest t-mob rom, just go to TouchFLO ver. 2.1 thread in Charmer Mobile 6, download the rom, read the instructions and flash. It will work.
Good luck.

Okiess gonner try it now. hopefully it will, will get back to you soon.
Ill describe the entire process.

Nope still not working, wont flash.
I run the flasher bat file the screen stays completely still nothing happens and i donno why. is it cus its not cid unlocked. i know you said it dont, but one of the guys said it did.
Get back to me soon

poleanator said:
Nope still not working, wont flash.
I run the flasher bat file the screen stays completely still nothing happens and i donno why. is it cus its not cid unlocked. i know you said it dont, but one of the guys said it did.
Get back to me soon
Click to expand...
Click to collapse
my charmer wasnt cid unlocked too, but i could install [vlodeck TouchFLO WM6 ver. 2.1]
it can be, that you have to install t-mobile AKU 3.3 from handy-faq.de

How To Flash

Ok ok im sure this question has been awnsered before, but searching from posts i cannot seem to find out all the requirements i need...now i know that the phone is something i need and i have it.. I have the T-Mobile Wing Hera110. Now what im looking for is the exact software to have the phone communicate with the computer so that i can flash the rom.
I know my roomate has the same phone and needs to know this information as well.
Thanks,
CA8OOSE

This should fit your needs:
http://forum.xda-developers.com/showthread.php?t=358615
Then get the ROM of your choice and go ahead

CA8OOSE said:
Ok ok im sure this question has been awnsered before, but searching from posts i cannot seem to find out all the requirements i need...now i know that the phone is something i need and i have it.. I have the T-Mobile Wing Hera110. Now what im looking for is the exact software to have the phone communicate with the computer so that i can flash the rom.
I know my roomate has the same phone and needs to know this information as well.
Thanks,
CA8OOSE
Click to expand...
Click to collapse
Ok you got 1 answer ... Lets take this a little more simple ... Goto microsoft site and download activesync its free . Thats the MAIN program you need for your phone to communicate to the computer. After that the rest is reading and figuring out what you want to do . If you want to flash other roms then you will need to HardSPL .......

Flashing WM6.1 to a new Herald

Hey there,
since I'm new to the community I hope I'm not doing it wrong
I will receive my new Herald within the next days and now I'm seeking for all the stuff I will need then.
1. Hard-Spl. I don't get it. What is it? Is it some kind of firmware update or whatever? The ROM's thread says that I would need SPL 4 or later to successfully finish the Update but I can't find that SPL application in version 4+ :/
2. http://forum.xda-developers.com/showthread.php?t=437385 - http://www.evolvers.net/Herald_Roms/Version 7.7/ => I'd like to use that ROM. But I'm not too sure whether to use Manilla2D or Omnia.
3. What if I needed to send my device back for warranty reasons. Is there some way to flash back the standard Win Mobile 5.0?
I hope I will get your attention!
Regards,
Chris

Hey there,
A friend of mine just told me about flashing ROMs literally a few days ago. I did my first successful flash just yesterday and I am very happy that I did. FYI, yes I am using a stock TMobile Wing from 2007.
Rom's are not interchangeable across different phone models as far as I know. So you need to get ROMs made for the wing a.k.a. the Herald. Any Rom for the Herald should work.
Just remember one thing that I forgot to do, make sure that you back up your data. I forgot to do this and lost all of my data. Luckily, I did not have any pictures or music that I was too sad to lose. However, I did lose my contacts. Again luckily, I had an old Sim card from last year that had my contacts on it, so I was able to get back 90% of my phonebook, except for a few people that changed numbers or new contacts. So be sure to save anything you want to keep somewhere else.
I am pretty technically savvy, but I must say that flashing the Rom did take me several hours. The process itself only takes about 10 minutes, but it took hours to figure out what type of Rom I needed and how to exactly flash it. You will see many people trying to tell you that you need to know your IPL and SPL version, and there is no way to know this until you start flashing! It wasn't until I did my first accidental flash that it showed me this information, and this ended up being my first successful flash. After trying for several hours the night before and not succeeding, I guess that's why it slipped my mind that flashing successfully would erase all my data.
The one that actually worked for me was the Canonyang Rom. In the link below please look at post number 216, and you will see a link to download the ROM that worked for me. The file is "HardSpl_WM6".
http://forum.xda-developers.com/showthread.php?t=332413&page=22
I tried to flash directly to open touch, and no matter what I tried it was not successful. When I accidentally tried this Canonyang flash it worked successfully the first time, and after that now I was able to flash to any other Rom.
I am currently running open touch light version 6.5 because I read in another thread that it's supposed to be the fastest. I don't need a lot of features so I'm happy with what it has, and it is much, much faster than the stock T-Mobile Rom.
Since you are now getting it, yes, warranty is an issue for you. I am very new to all this, but from what I gather, once you flash, it does void the warranty. Perhaps someone else can answer if there is a stock TMobile rom, that you can flash back to. However, since the roms are digitally signed, I'm not sure that by even doing that, if TMobile can tell you modded it, and therefore elect not to honor your warranty. I guess that's a risk you have to decide if it's worth it or not. IMHO, I found out about rom flashing this week, and my warranty was up last month. However, if I had found out about this during my warranty period, I would have still done it. The Tmobile stock rom is sooo slow, compared to these roms. If you've never used these roms, you'd think like hey, it's got some bugs, but it's not that bad. But if you've used them, you're never going back to stock rom again.
I apologize if there are any typos, as I am using voice to text recognition software that I am testing. I thought I'd help you out by writing this as well as I test it. Good luck and let us know if you have any questions, we're all here to help.

Hey,
thanks for all the information. Was very helpful. I decided to you the ROM from that link. Should work, shouldn't it?
The only thing I don't get is how to get to SPL4+ :/ I heared of different methods of SPLing. Like Hard SPL and USPL. Can you bring light into that cave?
Cheers.

Hey there,
Your link goes to the Open Touch thread. The link I'm referring to, is this one:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
As I said, I was NOT able to flash directly from stock to OTP. I tried many methods, and Canonyang was the only one that worked for me. After I successfully flashed to CY, then I was able to flash to OTP without issue. But in theory yes, any Herald rom's should work fine.
In regards to IPL/SPL, my wing is from September 2007, and I had IPL/SPL both above 4. I had NO WAY to verify this before flashing. When I initiated the flash for CY, and the wing rebooted, it was THEN I saw my IPL/SPL versions. I'm sure yours will be at least v4.
Actually as I write this to you, I remember a critical step I forgot to tell you. You need to Application Unlock your device as well. This is probably what I was missing in my failed attempts. After I did that, then the CY flash worked. I got that information, from this link:
http://forum.xda-developers.com/showthread.php?t=356295
So I would suggest following the steps there first, then trying the link earlier to flash to CY, then flash to anything else. This is the procedure that worked for me. Good luck!

Hey there and thanks again for that bunch of information
itbmd said:
I'm sure yours will be at least v4.
Click to expand...
Click to collapse
What does that mean then? I do not have to HardSPL my phone? But still, would you mind telling my step by step (And I really mean step by step^^) how to HardSPL a device? I really do not want to brick my phone directly at the beginning.
Oh and what should I rather be using, SoftSPL or HardSPL?
Cheers.

Hey there,
Sorry but I just flashed my device less than a week ago as I mentioned. I don't have many of the answers you ask, because I'm asking them myself. I don't know the diff between Hard vs. Soft SPL.
The file I linked you to earlier, is a hardspl, as denoted by its filename "HardSpl_WM6". It hardspl flashes to the canonyang rom. It was then I saw the IPL/SPL versions, and then was able to flash to other roms.
FYI, I was concerned about bricking my device as well. But during the roughly 5 hours I was trying to flash it correctly, every time the flash failed, it did NOT brick. It just errored on the pc, and the Wing itself just restarted and went back to the stock TMobile rom. It never actually bricked. Make sure you do the application unlock though; I think that's a step that people may not do and could cause it to brick. Good luck.

this concludes the beta test...

Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance

Have you tried a hard reset?

Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM

i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!

I am getting the exact same problem.I do not know what to do.

Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.

ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer

OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.

thanks.. do you have the link for the new rom?
I'm going to give it a try

The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip

just a question how do you flash it?
can you help me? i'm very new to this phone

I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.

!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.

ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"

Is there a way I can recover this without losing all that is on my phone?

Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....

Duttys V2.9 RTM Finale

someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already

i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!

its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.