Related
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
What operator are you on? All of the recent ROMs do not work on Orange UK. The phone and txt message functionality is broken.
As for not showing the ROM version, this always happens after a crash. Just reset again as soon as you see "NONE".
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
opps,thats all rom's since mid november
TEXT,PHONE BLUETOOTH WIFI.
Read The Wiki
NeCrOpHiLiCaT said:
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
Click to expand...
Click to collapse
not being funny, but there are a few pages in the Wiki that can help.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home : explains all about WM5 on a BA
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5 Gives you STEP BY STEP instructions how to go back to 2003
NeCrOpHiLiCaT said:
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
Click to expand...
Click to collapse
Before you complain that users cant help you, try helping yourself. You will find that people are more willing to invest their time then!
realkinguk said:
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
Click to expand...
Click to collapse
Wierd, you are the first to come forward to say that it works fine for you. Myself and a couple of other users haven't been able to get reliable telephony for months now. It may be a regional thing, perhaps only in Scotland. I've had replacement phones and I still have problems.
No one seems interested in helping as it's not something that can be easilly tested unless you have the problem yourself.
i was looking for hte downgrade link ill give that a go tomorrow, as tot he person that said i should try helping, how can i help if i dont know anything? we all need to learn and start somewhere. think ill be staying away from here with my spvm600 if thats the attitude this place is takeing.
Hey, it wasn't intended at you, obviously. What I was basically saying was that if you have the same problem, then don't expect a fix as it's a tough one to fix.
could it happen that you are one of those who downloaded the rom which someone had the gall to replace the original one? which rom upgrade did you use?
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
NeCrOpHiLiCaT said:
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
Click to expand...
Click to collapse
use one of the latest (i.e. helmi's or xplode's) and upgrade again. be sure to follow the instructions (including that for device data, and the no/yes/yes input). make sure also you were able to download the whole file (it was a problem for some users).
you might also want to upgrade your radio version (1.15.00).
good luck.
i have a 8125 that i was using with cingular / att
the other day i was doing a HARD RESET .. and thanx to my stupidity i did it as the battery was just about to DIE ..
it did .. right in the middle of the HARD RESET
i plugged the phone back in and then turned on the phone
the " splash screen " comes up ..
the numbers
it says
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.11
appear on the top left of the screen .. and that is where it stops .. it will not BOOT any further .. .. nothing works .. the only way to get the screen to shut off is to take the battery out and start the process again
I feel i have damaged the O.S system or something
can anyone give me a place to start .. or a way to begin to even attempt to fix this problem ..
thank you so much in advance to anyone who can shed some light on this problem ..
start with the Wizard Wiki and get an original ROM (form the provider) to restore phone to good condition
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Sanboy said:
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Click to expand...
Click to collapse
My first advise was to read the Wiki. There you'll find a LOT of information and help on how to get it done.
You must find the same ROM that came originally with your phone. Go read and search...
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Yes go to cingulars website and download the 2.25 rom release. This will allow you to flash your phone back to oem condition. Try hard resetting it again, I don't remember if you can do it from the boot loader screen but you may be able to.
Best of luck.
Jeff
Sorry, but Cingular site not exist, today is AT&T, or not?
Sanboy said:
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Click to expand...
Click to collapse
What you want is to be spoon fed and that's why is so hard to find anything in this forum: because of the huge amount of repeated posts with same questions.
I made a Google search and in less than 3 minutes and 3 sites i found the original HTC/AT&T ROM link...
http://www.america.htc.com/support/8125/software-downloads.html
geez...
EDIT:
Double posting isn't a good policy either
I have watch videos...read instruction etc, etc, all I could on ATT Tilt/Kaiser flashing...I still don't have a clue. Do I do some type of CID unlock 1st....then is there a Jump SPL and than a Hard SPL. Is any of them two done from the boot loader screen. I can fix most electronics but I don't understand.. no you-tube video...i saw it on flashing the kaiser....sound quality bad for the hard of hearing (me).
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
1. download JumpSPL1.93-KAIS.exe from http://forum.xda-developers.com/showthread.php?t=354061.
2. get the hardSPL version you need for your rom. I used v3.56 from the link Carty gave you in the post above, because the rom I am using was based on the official att 6.1 rom. You may need a different one for the rom you want to flash I don't know too much about this yet. Leave the folder where you unzipped the hardspl files open on your desktop so you wont have to look for it later.
3. connect your phone to the PC, and transfer JumpSPL1.93-KAIS.exe over to your phone with activesync. Remove your microsd card if you have one on your phone (very important).
4.run JumpSPL1.93-KAIS.exe on your phone, it should go to a bootloader mode with the tricolor screen and underneath it will say USB.
5.Unplug the phone from the PC, wait about 5-10 seconds and plug it back in. Activesync should NOT be able to recognize your phone. If it does, something went wrong so start over.
6. Finally you can run the KaiserCustomRUU.exe from the hardSPL folder on your pc desktop and follow the instructions. It will load the HardSPL on your phone.
7. if you want to make sure it loaded, shut down your device and when your are turning it on press both the power and camera button at the same time, it will go into bootloader mode and show you what SPL is on your device. mine says SPL-3.56.Hard after I loaded the hardspl. You are now ready to flash a new rom.
This wiki helped me the most:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Read as much of it as you can, especially the "SPL questions?" link, that was the most useful for me.
I hope this helps
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
tricky_uk said:
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
Click to expand...
Click to collapse
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
DaveShaw said:
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
Click to expand...
Click to collapse
Sadly blogspot gets locked as well.......i've managed to download some stuff of here but in general sites it classes as 'personal storage' it gets a bit upset about...
if anyone knows any other way round i'd be eternally grateful!
ben_zin said:
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
Click to expand...
Click to collapse
Amen to that.. I like this guy.
Thx...clear and direct....now I am ready.
Carty said:
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
Click to expand...
Click to collapse
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
materijalmen said:
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
Click to expand...
Click to collapse
This will then allow you to flash the custom ROMs on your Kaiser.
Click to expand...
Click to collapse
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
materijalmen said:
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
Click to expand...
Click to collapse
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
denco7 said:
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
Click to expand...
Click to collapse
I second Denco Read Read Read Read Read........ as anything you will ask, or can even think to ask..... more than likely has ALREADY been asked AND Answered.
Htc XDA member: how can I help you today?
Xda Newb: My phone isnt working.... Can you fix it ?
Htc XDA member: is your phone plugged in and turned on?"
Xda Newb:Wheres the on button?
( 1 min later) where do I plug it in at ?
(2 mins later) whats a battery?
(2.25 mins later) how do I know its on?
(2.3 mins later) why wont you answer me ?
(2.35mins later)Why arent you telling me my answers?
(2.4 mins later)whats wrong with my phone?
(2.5 mins later) You guys must be jerks because you wont spoon feed me [email protected]@@!!!
XDA MODERATOR : you noob you are banned for not reading PAGE 1 of the GODDAMN WIKI as all your answers were right there 1 click away. Now you cant access them HAHA. This is what you get for being IMPATIENT AND ANNOYING ( They should really do this here )
LOL
Just my rant
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
kyniemxotxa98 said:
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
Click to expand...
Click to collapse
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Will it work on my TP/Excalibur? No as phones have different hardware to which is why h-spl's are device specific.
The best way to help yourself and not get a brick "expensive paperweight" is to head to device subforum and do some reading, as last thing you want is to be creating a thread named "Help"
denco7 said:
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Click to expand...
Click to collapse
Since I cannot find anything helpful in Diamond forum, I dig around in other forums to try to rescue my phone and make it usable.
Which is a recipe for diasaster...seriously, if you are gonna do something as stupid as to try to make something SPECIFICALLY for another device work on yours, then you do not deserve to own a Diamond.
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
deleted post
You need to check in the bootloader(tri-colored screen) what your spl is... In order to flash a custom rom it will need to say this SPL-0.72.01OliNex....if it does not say this then you need to hardspl the phone...if you follow the instructions it is easy. Once this is done then you will need this....copy the ROM you have downloaded into the CustomRUU folder and execute the file. If this does not work....you will need to format your memory card(Fat32) and follow these instructions, plus there is a video tutorial regarding all the procedures you need....the instructions are as basic as one can get.
Good luck.
Regards,
WC
Fructis said:
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
Click to expand...
Click to collapse
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
devalian said:
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
Click to expand...
Click to collapse
You mean that no person with a general knowledge about flashing rom = busting warranty shouldnt be allowed using a phone?
How do you know anything about what i do with the phone, with what apps im using, and what im using it for?
Mind your own business and come back to the thread when you have something to contribrute.
Fructis said:
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
Click to expand...
Click to collapse
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
the guides are pretty thorough...
if you read them its clear enough...
(assuming you want to use non official Sony roms - you need to flash your hardspl so you wont get errors... (think this is where you're stuck)...
download a hardspl and flash it via activesync)
Then
copy the rom into your sd card root directoy...
rename it to kovsimg.nbh
hit the reboot switch while holding down power and the down vol button to start the update process
this is the easiest way...
but as above, if you want shortcuts for everything and dont read the instuctions clear you MAY END UP BRICKING YOUR PHONE...
Gwystyl said:
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
Click to expand...
Click to collapse
I'ts a difference in writing a post with no meaning and a post like you just did.
Example: You start a new thread, no matter what it's about. There are two guys responding.
One guy is giving you this as a answer: Lol, thats kinda noobish that you dont know how to use your phone.
The second guy answers just like you did, you gave me information and links on where and what to search for. But still points out that theres many "obvious" stuff that im asking for.
Big difference.
Back to topic. I've already figured out how to do all, i have all the files that i need.
The problem is that when i try and update the SPL to 1.00.X1 instead of thje other 1.02.Olinex (or what its called) I always get a connetion error 262.
Ive read the links that you gave me before, and it says that you need to either softreset, change usb port or reboot your computer. Guys in another thread gives the same instructions.
Still no success.
So since i've done my searching, done the exact procedure that you should do. And it's still not working. Is that still something just "obvious" to ask for?
And i apologize if i hasn't been clear enough in this thread that the phone im using is a proto. And i still haven't been confirmed by some other proto user that this method is acctually working.
I'm thankfull for all the (helpfull) responses i get. And im trying them all.
If something else comes up i will post it in this thread. No matter if its obvious or not.
Have a nice day everyone!
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
CharlieSImon said:
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
Click to expand...
Click to collapse
haha, damn, thats obvious, that i didnt think of that before. hehe, thank you!
Btw, if the phone gets into the tricolor menu, and the progressbar shows up (but still stuck at 0%) can it still be because the driver?
Thanks
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
ryousuke said:
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
Click to expand...
Click to collapse
Oh, im sorry if i didnt expressed myself good enough.
When im using X1_HardSPL i get the 284 update error.
When in using the custom RUU i get the 262 error.
So i guess the X1_HardSPL application is to change SPL?
If i cant seem to change SPL i wont be able to change rom either. Correct?
Since i have the SPL that was shipped with the phone, can i still upgrade from R1A to R3A without changing SPL?
Have you disabled any of your firewall and anti virus programs when you try using the software?
I previously always had to disable my zonealarm firewall before I could uset he spl software....
Yes I've done.
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
lrammers said:
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
Click to expand...
Click to collapse
The Phone is still a Proto.....
Therefor not accepted by SEUS
Try flashing the official Sony Ericsson ROMs first. No need to Hard-spl for those.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
And if you try to flash via ActiveSync with CustomRUU? That worked most of the times with my X1. Oh wait, that got you the error 262.
In one of your other threads someone says (or you quoted) that one of the advantages of a proto was that there's no security check, which means it might not even be necessary to use HardSPL first.
I've had error 262 a few times; just try to flash again, maybe from another computer if that's possible. You can also try to flash another rom first.
Which roms have you tried flashing? Have you tried with a freshly formatted sd-card smaller than 2 gb (although I think that won't have any effect); you can also try renaming kovsimg.nbh with all small letters, all capitals or the way you just spelled it. It might be important.
offtopic: I get your point on the reactions you get when opening new threads. Everything is simple when you now where to look or if you've done it before, but it can be very hard to find the answer when there's so much info to choose from.
That said: a topic title of something like "having trouble flashig a custom rom to prototype" sounds a bit more serious then "need massive help" with a lot of exclamation marks. That might set people off on the wrong foot.
using P3700 and Im trying to unlock it.
done with downgrading it to 1.40.OilNex and Ive already launched customruu.
(btw, what does it do? cuz I don't see any difference in my pda, eh. I mean customruu)
I've copied 'diamunlock.exe' to anywhere in my device but I don't know how to open it.
I guess, there's should be a pop-up or sth on my phone but I don't see anything. What should I do? Give me some hand guys. plz :')
using WM 6.5.1. 23089 WWE with htc sense 1921.
and have already put RadioROM.
(I don't know what they are though.)
I'm jus kinda putting all those stuffs in my pda cuz I don't have any idea.
I've googled a lot and read lots of instructions from you guys.
pls, help me
Sorry to say, mate, the best you can do is to start over in reading again:
http://forum.xda-developers.com/showthread.php?t=416211
You may want to check the wiki -pages as well:
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Be sure you understand the steps before applying otherwise you may brick your Diamond.
Good luck!