Messaging locks up unresponsive - Tilt, TyTN II, MDA Vario III General

This has happened a couple of times and then mysteriously self corrects after a few hours. The messaging feature (texts and emails) fails to respond at all. I can not get it to open, will not display incoming texts, can not do anything. I am using SPB Mobile Shell with WM 6.1. It does not appear related to Mobile Shell because it fails to open from any screen at all.
Anyone?

same problem here
I have the same problem over here, except that ist completely not responding not even after a few hours or so...it worked fine all the time
I think it has do to with the installation of wm61voip.cab which unlocks the voip feature ...not sure about that but it was the last "major" change I made....
im running the wm 6.1 official htc rom on the kaiser
im completely clueless how to solve it...at least emailing was a real cool feature at all :\

Delete the Inbox.mstXXXXXXXXX folder in the root folder of ur microsd card, perform a soft reset and u guys shd be fine. I'm supposing you guys have the "use storage card to store attachements" option checked.
Thank me later

Very nice!!
dude hes right, after searching also found that issue here
http://forum.xda-developers.com/showthread.php?t=350862
works great for me...deleted inbox* from the storage card, also another guy wrotes it works if he removes the storage card to read his mail
so I guess a work around could be to not save attachments on the card, which is a setting Id use...and the reason why the inbox folder was created...?!
thanks and greets

...
sampcyn718 said:
Delete the Inbox.mstXXXXXXXXX folder in the root folder of ur microsd card, perform a soft reset and u guys shd be fine. I'm supposing you guys have the "use storage card to store attachements" option checked.
Thank me later
Click to expand...
Click to collapse
sorry I overread your attachment suggestion, will disable this stuff now

sampcyn718 said:
Thank me later
Click to expand...
Click to collapse
Yep. That did it. Very obscure problem. I posted the solution on the ATT Board as well, since someone there was just as miffed.

DLTempler said:
Yep. That did it. Very obscure problem. I posted the solution on the ATT Board as well, since someone there was just as miffed.
Click to expand...
Click to collapse
you welcome....im glad i was able to help, thanks for spreading the knowledge

I have to give thanks as well, I thought I was going to have to hard-reset or something, and was not thrilled about that. Deleting the inbox.mst folder did the trick. Thanks a ton!

Sampcyn718!!!!!!!!!!!!!!!
sampcyn718
Member
Thank you.... seriously.... Absolutely valuable info here.

Related

Messaging has stopped loading

I've recently bought a Kaiser (Vodafone 1615) and weirdly messaging has stopped loading, I can't check my messages or send and SMS, etc.
I've soft reset the device, but it's still the same. Is my only option now to hard reset and lose all data?
Hello Forums!
Hi scottola,
It sounds like some kind of software fault has developed with your handset. If you got it directly from Vodafone on a contract then you're covered by a warranty for the duration of your contract term.
If you would like us to arrange repair of the handset for you please contact us on 191 and we'll diagnose what's wrong and get it fixed without delay.
Hope this helps,
edwardpeter
Vodafone UK
This is weird: my messaging app has also just stopped working. It won't load from the buttons, or using the exe directly. Is it hard reset time?
Any thoughts guys? No emails - can you imagine?
I'm sorry, but without help from any one else I can only offer, try a soft reset, if that don't work try a hard reset, as if your device came out of the box (or with any ROM upgrades you have done).
2x soft keys and a stylus up the derrier!!
Hang on as long as you can, someone may have had this before.
I have had this before...twice....
In both cases it was immediately after loading an application - last time was Google maps.
However, it isn't Google maps that caused it..I believe, from a process of trial and error, that it was one of two apps. loaded immediately BEFORE the last one - either WIMP or Bandswitch (or maybe a combo of both). Whatever, in both cases pressing the MESSAGING button or the Today secreen item resulted in nothing. Also there were icons missing in the apps and control panel folders. My only conclusion was that a badly constructed app. had somehow not controlled where in memory it was writing.
Sorry, but the only fix for my situation was a hard reset.
Andy.
Mine does this. On mine it is lost clusters/chains on the storage card where you've saved attachments. The solution for me is to delete the Inbox.something folder on the card.
Why it happens I have no idea though.
Jon
Perfect! That worked - thank you.
The only downside is that I lost my old SMS messages - but it's better than no messages at all. Now to find a way of backing up those SMS messages....
thanks re messaging
jontelfer said:
Mine does this. On mine it is lost clusters/chains on the storage card where you've saved attachments. The solution for me is to delete the Inbox.something folder on the card.
Why it happens I have no idea though.
Jon
Click to expand...
Click to collapse
thank for this !!!! mine just had the sane problem an i found you fix !!!!
and it worked !!!
cheers
73
gbsurf
My messaging suddenly stopped working also for no reason last week, I'm using the original Orange UK rom, had to do a hard reset to get it working again
Glad I read this post, at least if it happens again I have an idea of how to fix it, thanks for the tip
jontelfer said:
Mine does this. On mine it is lost clusters/chains on the storage card where you've saved attachments. The solution for me is to delete the Inbox.something folder on the card.
Why it happens I have no idea though.
Jon
Click to expand...
Click to collapse
Man, THANK YOU!!!
THIS HELP ME !
liteswap said:
Perfect! That worked - thank you.
The only downside is that I lost my old SMS messages - but it's better than no messages at all. Now to find a way of backing up those SMS messages....
Click to expand...
Click to collapse
I don't think I lost my SMS msgs but the suggestion worked. Anyhow, Sprite Archie is a way of backing up your SMS to email.
jontelfer said:
Mine does this. On mine it is lost clusters/chains on the storage card where you've saved attachments. The solution for me is to delete the Inbox.something folder on the card.
Why it happens I have no idea though.
Jon
Click to expand...
Click to collapse
WORKED FOR ME TOO. THANKS. AND GOOD LUCK TO ANYONE WITH THIS PROBLEM
this is VERY odd.. last week my messaging also stopped working! It acted as if the messaging exe. had been deleted or something.. nothing was responsive in launching it.
Someone mentioned google maps. I CLEARLY recalled that I updated to the new version of google maps.. and then the messaging problems occurred. I had been thinking these two were related.
Thank you so very much Jon
jontelfer said:
Mine does this. On mine it is lost clusters/chains on the storage card where you've saved attachments. The solution for me is to delete the Inbox.something folder on the card.
Why it happens I have no idea though.
Jon
Click to expand...
Click to collapse
Thank you so much for the solution. It has helped many desperate souls just like myself.
I've been hard resetting & restoring old backup for the last 4 hours without avail until I read this post. I managed to launch the SMS/MMS/email again
Thank you once again & you're our saviour!
Mine did this 2 days ago, "luckly" a soft reset on my att tilt fixed it..(crosses his fingers)
Cheers Jon
had this occur on my TYTN II this morning and was starting to panic as i keep a lot of work mail and text on my handset and havent backed up this weeks yet !!!
managed to delete the inbox.xxxxxxx folder from the memory card and all is well, no messages or data lost, mind you i did a quick PIM backup before i did just in case.....
So big thanks fella.
I just removed my storagecard and put it back in again. that was all i needed to do
Windows Mobile 6 email/SMS/MMS not starting
Thanks to all who contributed to this solution.
I have an HTC Touch Cruise and was about to do a hard-reset when I found this thread.
Saved my day! and a lot of work in case I had done hard reset, having to install all my software again.
Deleting inbox.xxxxxx folder did the trick but there is one minor issue.
The HTC Touch Cruise has the 3D TouchFlo interface and this has a "Today" app that also has quicklauncher buttons for e-mail and SMS. These buttons indicate the number of unread e-mails and SMS-es and indicates a wrong number until you do a soft-reset.
Then works like a dream.
Thanks again.

Recently used progs list on START button

Hi folks!
Sorry if this has been covered elsewhere but my search results showed nothing so i had to ask as this is driving my mad.
When i hit START on my WM6 handset, as you will all have, i have a list of previously used programms.
Well with installing Slither's Cube (awesome by the way and more to come soon i'm told... see http://forum.xda-developers.com/showthread.php?t=336234), i've been back and for the testing icon links so my screen after hitting START is 'more' than full, it's at bursting point
So my question is this.
Is there any way you can reset it back to scratch / basic?
There MUST be... isn't there???
Message back soon before i end up crying
Steve
tweaks2k2 can clear up the recently used program. Dont know the exact registry key tho, sorry!
ekw said:
tweaks2k2 can clear up the recently used program. Dont know the exact registry key tho, sorry!
Click to expand...
Click to collapse
No worries mate. One more thing. This is another one that is winding me up something rotten.
Example... on a Nokia, you can choose the view you wish to have in your contacts list by going into options etc etc and selecting either... SIM ONLY, SIM AND PHONE MEMORY or just PHONE MEMORY.
Obviously the PHONE MEMORY on a WM5 or 6 would be OUTLOOK so... how do you display OUTLOOK ONLY???
Am i making sense here?! lol
If i can't get the answer to this in the next day or so then i'll have to New Thread it cus this one drives me mad to!
Steve
TheShowStopper said:
Hi folks!
Sorry if this has been covered elsewhere but my search results showed nothing so i had to ask as this is driving my mad.
When i hit START on my WM6 handset, as you will all have, i have a list of previously used programms.
Well with installing Slither's Cube (awesome by the way and more to come soon i'm told), i've been back and forthe testing icon links so my screen after hitting START is 'more' than full, it's at bursting point
So my question is this.
Is there any way you can reset it back to scratch / basic?
There MUST be... isn't there???
Message back soon before i end up crying
Steve
Click to expand...
Click to collapse
Delete everything in [HKEY_CURRENT_USER\Software\Microsoft\Shell\TaskSwitch] and soft reset asap.
TheShowStopper said:
No worries mate. One more thing. This is another one that is winding me up something rotten.
Example... on a Nokia, you can choose the view you wish to have in your contacts list by going into options etc etc and selecting either... SIM ONLY, SIM AND PHONE MEMORY or just PHONE MEMORY.
Obviously the PHONE MEMORY on a WM5 or 6 would be OUTLOOK so... how do you display OUTLOOK ONLY???
Am i making sense here?! lol
If i can't get the answer to this in the next day or so then i'll have to New Thread it cus this one drives me mad to!
Steve
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=356309
spoonfed
TheShowStopper said:
No worries mate. One more thing. This is another one that is winding me up something rotten.
Example... on a Nokia, you can choose the view you wish to have in your contacts list by going into options etc etc and selecting either... SIM ONLY, SIM AND PHONE MEMORY or just PHONE MEMORY.
Obviously the PHONE MEMORY on a WM5 or 6 would be OUTLOOK so... how do you display OUTLOOK ONLY???
Am i making sense here?! lol
If i can't get the answer to this in the next day or so then i'll have to New Thread it cus this one drives me mad to!
Steve
Click to expand...
Click to collapse
For hiding SIM contacts, thus displaying only "Outlook" contacts:
[HKEY_CURRENT_USER\Control Panel\Phone\"ShowSIM"=dword:00000000]
tnyynt said:
For hiding SIM contacts, thus displaying only "Outlook" contacts:
[HKEY_CURRENT_USER\Control Panel\Phone\"ShowSIM"=dword:00000000]
Click to expand...
Click to collapse
Dude is there anything you AREN'T able to answer?!! The Meaning of Life obviously is not included!
Thanks so much. You're a star, both of you boys
Steve
TheShowStopper said:
Dude is there anything you AREN'T able to answer?!! The Meaning of Life obviously is not included!
Thanks so much. You're a star, both of you boys
Steve
Click to expand...
Click to collapse
You're welcome! Glad to help!
I like 'ClearTemp', works well, and I just have it run on startup
TheShowStopper said:
Dude is there anything you AREN'T able to answer?!! The Meaning of Life obviously is not included!
Thanks so much. You're a star, both of you boys
Steve
Click to expand...
Click to collapse
please note that doing it that way wont stick after a reset, you would have to use the cab i uploaded within that link i sent you
tnyynt said:
You're welcome! Glad to help!
Click to expand...
Click to collapse
I have to put you to the test now!!!
Ok, the XDA Orbit has a built in GPS as does the Kaiser yes.
No, what the Orbit DOES have that the Kaiser doesn't is... yes, you guessed it... an FM Radio.
So... would it be possible to get the FM Radio settings off the Orbit ROM and patch them into the Kaiser ROM?
Anything you can think of or trick you have up your very knowledgeable sleeve at all?
This should test you!!!
Steve
ekw said:
please note that doing it that way wont stick after a reset, you would have to use the cab i uploaded within that link i sent you
Click to expand...
Click to collapse
THAT I don't know. I am a Trinity and a Touch user and these tweaks remain after soft reset but maybe it's different with Kaiser.
ekw said:
please note that doing it that way wont stick after a reset, you would have to use the cab i uploaded within that link i sent you
Click to expand...
Click to collapse
Sorry mate. I'm losing it here. I knew i should've stuck to just the one damn link!
Attached Files KaiserSimFix.CAB (2.5 KB, 1 views) is for....??? The SIM / OUTLOOK issue yes?
yes, its to display outlook contacts only in contacts
ekw said:
yes, its to display outlook contacts only in contacts
Click to expand...
Click to collapse
Ok. Got confuddled there!
I'll give it a quick go now, hit softy and see what happens. BRB!
Steve
P.S. Did you take a look at my question about the FM Radio at all?
unless the kaiser magically gets a am/fm radio, no
but if you have an unlimited data plan and/or wifi in the area just stream it!
Edvard_Greig said:
I like 'ClearTemp', works well, and I just have it run on startup
Click to expand...
Click to collapse
Clear Temp you say? Now that's a 'sound safe' suggestion. Could i ask you for a step by step for that if possible please dude?
Thanks, Steve
ekw said:
unless the kaiser magically gets a am/fm radio, no
but if you have an unlimited data plan and/or wifi in the area just stream it!
Click to expand...
Click to collapse
Sadly not. On the 3 network, maybe that would be possible but not on my Orange plan!
Ok so the CAB for the Outlook works lovely. Thanks for that. Awesome job
Just trying this Clear Temp for the START button question i asked. What was your suggestion to that one again please dude? Sorry about this, i haven't been to bed in over 28 hours and i'm starting to fade badly
Steve

TomTom Navigator forgetful?

Ive got the L26 v4 rom and used to have the stock at&t rom, both give me the same tomtom navigator problem. MY home is always default when i restart the program, none of my favorites are saved, if i add any personal info its gone the next time i start the program. Gps works great haha. Id just love to save the gps location of me in the porta john at work. Any help would be greatly appreciated.
TomTom always defaults to your home location, it's intended to, that's just how it works. If you want to change it; feel free, but it'll start wherever you change it to next time too.
And I just checked, I have my typical favorites, no problems that I know of. TomTom behaves almost exactly the way it did on my Treo 680.
khaytsus said:
TomTom always defaults to your home location, it's intended to, that's just how it works. If you want to change it; feel free, but it'll start wherever you change it to next time too.
And I just checked, I have my typical favorites, no problems that I know of. TomTom behaves almost exactly the way it did on my Treo 680.
Click to expand...
Click to collapse
No it goes to the default hom elocation of the white house not my house it never saves my home location or favorites. i think i made that clear it forgets everything i put in i cant have favortes or a home address because it acts like the first time i ever started tomtom ITS NOT ROM RELATED
can anyone tell me where tomtom keeps all its userdata maybe its saving in the wrng pace or something cuz it never saves anything
hello. Sounds like you have your poi.dat and a few other files set to read-only. Check the properties of the TomTom folders and ensure that they are not read-only.
Thanks
The GPS settings are stored in "navigator.cfg", while all other settings are stored in "MapSettings.cfg", which is in the map folder. Make sure that none of these two files is read only. Actually, make sure that all TomTom related files are not read only.
am i invisible?
flashy said:
am i invisible?
Click to expand...
Click to collapse
Who said that
Resolved
awesome thanks guys that did the trick. now i can save my gps coordinates for slacking off at work haha. Way better answers than IT ALWAYS DOES THAT haha
Just to add, although probably irrelevant now you've sorted it, but for anyone else reading this thread, if you want to remove your home location completely for security or for any other purpose, just delete the file MapSettings.cfg from the map folder on your SD card. It will recreate itself once you run the program again and add or change settings, without a home location, or you can specify a new one. From my experience, it makes itself not Read Only by default.
Tx1oss said:
Who said that
Click to expand...
Click to collapse
there's always one.
Glad to help matey.
bugaveli said:
awesome thanks guys that did the trick. now i can save my gps coordinates for slacking off at work haha. Way better answers than IT ALWAYS DOES THAT haha
Click to expand...
Click to collapse
Maybe next time if you actually ask the question the way you later explained it, my answer would have been different. No reason to get pissy over it. Point out to me where my answer was incorrect. No? Didn't think so.
khaytsus said:
Maybe next time if you actually ask the question the way you later explained it, my answer would have been different. No reason to get pissy over it. Point out to me where my answer was incorrect. No? Didn't think so.
Click to expand...
Click to collapse
your answeer was wrong because it was clear tht it wouldnt remember anything, not that it always went to my home location its english and a lot of other people uynderstood. Im not pissy, im thrilled if it makes you feel btter your answer was the first response, you get credit for that. then again if someone wouldve posted their abc they ld have been first too.Itll be ok i promise this thread is dead now anyways
bugaveli said:
Id just love to save the gps location of me in the porta john at work. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Why would you wanna do that just out of interest? Can you reference it with google maps POI's something like "bugaveli's dump of the week"
No i thought the best place on a jobsite is the porta john therefore gps cordinates are NESSECARY. Hmmmm dump of the week, niiiiice. Thanks for everyones reply!!
ok. i deleted the mapsetting and it worked. now do i delete the navigator as well? or how do i change a file from read only. please explain in english lol. thanks guys
yes delete it all
ben1do1 said:
ok. i deleted the mapsetting and it worked. now do i delete the navigator as well? or how do i change a file from read only. please explain in english lol. thanks guys
Click to expand...
Click to collapse
The .cfg file contains Home, favs and recent destinations. Nothing else should require removing.
Re. Read Only: I've found that this issue arises when Tomtom is backed up, and then restored, from a CD / DVD.
Burning the disk sets the attributes to Read Only (IMHO), so the files still retain the Read Only attributes when copied back to the SD card.
There are ways of changing this either on the Kaiser, or on a PC, but my prefered method would be to place the SD card into a reader on the PC, select the card/drive - Right click for properties and unselect the Read Only attributes to all.
Note - Properties can be accessed through mouse right click !
thanks everyone

Help! Device memory only 4MB

Firstly forgive me if this has already been dealt with, but I did a search and couldn't find anything.
My device is showing 4.1MB free of 133MB, which seems very low. I don't think I've downloaded anything significant but I don't know how to find major files which shouldn't be there.
Any help would be appreciated.
Do you archive your text messages, and never erase them? You might have a build up of picture / video mail, if you do that excessively.
Ni I delete them
Is your device running sluggish.
If it's not you are creating a problem out of nothing.
Maybe you have too many CABs or programs installed. Think about removing some.
But if you have your phone how you want it and its not running slow, then don't worry about it. Why have memory you're not going to use.
It's not running sluggish at all. I was just concerned that 4 out of 133MB didn't seem much!
What ROM are you using? It might have a dynamic Page poll which means It will use what it can.
JimmyMcGee said:
What ROM are you using? It might have a dynamic Page poll which means It will use what it can.
Click to expand...
Click to collapse
I knew this might get a bit heavy for me!
How do I find that out?
compimeh.0409.dat
You may want to search your windows directory for this file. I came across a post several days ago and it amazed me. I am not sure if anyone found a solution for this yet. Here is the thread you may want to read and the links included if you find this file on your device...
http://forum.xda-developers.com/showthread.php?t=407180
you may want to try a hard reset see if it fixes the issue but back up your data.
I've previously used TreeSize. Try googling for 'treesize ppc'.
It's an old app, but does its job perfectly. It'll show you whats using your storage space.
'tunes
mad_tunes said:
I've previously used TreeSize. Try googling for 'treesize ppc'.
It's an old app, but does its job perfectly. It'll show you whats using your storage space.
'tunes
Click to expand...
Click to collapse
http://pocketpcwares.blogspot.com/2006/12/todays-highlight-treesize-v10003.html
Maybe you accidentally hit the record button?
Thanks to Kaze0110 and mad-tunes. I downloaded treesize and found a 77MB music file!!!

Phantom Mailbox in Touchflo - How to remove?

Hi there,
using a touch Diamond and some time ago went through a ROM upgrade and used Sprite Backup.
On the messagign screen I now have some phantom mail boxes on the right hand side. If you click on the envelope it will come up saying "no Messages". If you then click on inbox it will take you to the Select an Account screen (as the selected account doesn't actually exist)
If you go through to the Windows Mobile interface you can only see the current mailboxes which are configured.
I have looked into the option of creating a new backup and hard reset and restore without the mail and configure all over again but would like to avoid this as I have found in the past this leaves me with duplicate records (due to sycing with multiple machines).
I am looking to find where I need to go to remove the phantom mailboxes. Looking around I am assuming there must be some configuration files or registry elements for TouchFlo which tells it to display the folders.
Does anyone know where this information is to edit or delete? All ideas are welcome and encouraged.
Thanks in advance
ghost email
i have the same problem.Did you find the solution for this?Please post.
I have the exact same problem and it's quite anoying
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
chribruu said:
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
Click to expand...
Click to collapse
Thanks alot, this worked perfectly
Worked like a charm...
works a treat, thanks.
this is excellent. thank you very much.
Easy to use. Thanx!

Categories

Resources