Database Develop

no data cable!

Hi guys iv just bought a "svp m2000" running wm2003se.
When i got the ppc i was missing the cable to connect via active sync.
Im asking is there any way og upgrading to wm5 or wm6 via a sd card?
Any Help on the matter would be great.
Thanks.
Andy...

- format a SD card with FAT32
- extract the .NBF file from the rom image you like
- rename the .NBF to *.NBF and copy it to your SD card
- put SD card in phone and start it in bootloader (hold the record button on left side and POWER button at same time and stick with stylus in RESET on bottom)
- confirm flashing on screen
- flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes.
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
I dont know what to rename the .NBF to but expriment along the lines of BLUE ANGEL
hope i helped,
Josh.
Edit: found another way
*put your blue angel on charge
* Download ntrw.exe.
* Copy ntrw.exe to C: \.
* Dos Command access to C:\
* Type ntrw write [ROM name].nb1 E:.
* Put your Blue Angel into bootloader mode with the SD card in the slot and leave it for about 30 mins (yes it freezes just leave it )

nice tutorial, since i am using a vista 64 pc i will give that method a try sometime, too, but there are some things not quite acurate/right in your description:
"- rename the .NBF to *.NBF and copy it to your SD card"
to what does it need to be renamed?
"(hold OK button on left side and POWER button at same time and stick with stylus in RESET on bottom)"
the button on the side of the device is actually the record button, the one with the tape on it.
maybe you could edit your entry, and as soon as the procedure is found right and precise enough, it might make the wiki.
very nice work!

it didn't work

Thanks for your help . ill give it a go now and see if anything happens..
Andy..

@chef
beakybal4 said:
- format a SD card with FAT32
I dont know what to rename the .NBF to but expriment along the lines of BLUE ANGEL
hope i helped,
Josh.
Click to expand...
Click to collapse
yes i know it might have been a bit wrong because i scoured the internet for ages and only found a hermese SDcard flash apart from the other one i posted after the "EDIT:"
anyways, i'm interested to find out how to do this.
There isnt a tutorial, currently at the time of writing, of how to do this so it would be great if we could make a breakthrough
Josh.

Image file not found, help please!

Hello people.
I have minor problem over here, I have flased my rom before but in a different way Through the xperia x1 phone with the usb cable in, all I had to do was to install a file through the pc.
But there is another way Id like to do it now, I have a .image file and have renamed it to "kovsimg.image" and I did also install HARD_SPL before.
To make it easier for u to help me.
1. Install hard spl
2. put the kovsimg.image into the memory card
5. Remoed the USB cable
3. turned of the phone
4. Pressed down lower sound and on/off button together (I got to the correct place where there are different colors.
5. Image file not found!
At nr 5., that is where the problem is. Why does it say Image file not found?
I have also tried with .nbh file 2, occuring the same problem though.
Thanks!

The filename should be "kovsimg.nbh"

sweflo said:
The filename should be "kovsimg.nbh"
Click to expand...
Click to collapse
But in another thread that is sticky, said that it can both me .nbh and .image
So the fact that was said is wrong I guess?
Well that will not either fix the problem, before the .image I tried with a kovsimg.nbh file and had the same problem.
Thanks

Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..

sweflo said:
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
Click to expand...
Click to collapse
Im sorry but how exactly do you mean?
If you mean that the "whole" file maybe didnt get copied into the mem card?
It thats what u mean, I just checked it and both files are 213mb so :S

Check the spelling "kovsimg.nbh" and copy the file from the computer again

sweflo said:
Check the spelling "kovsimg.nbh" and copy the file from the computer again
Click to expand...
Click to collapse
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough

Freak174 said:
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Click to expand...
Click to collapse
You only hard_spl ones, you can make so many flashings you want but remember to do a hardreset after flashing..

did u try to search the forum?
http://forum.xda-developers.com/showthread.php?t=469300

boy, you really haven't read the stickys or haven't understand them fully...
just be glad that this flash-process is pretty stable and it's almost impossible to brick one's phone beyond revival.
read them again!
but to summarize it:
- you only have to do hard-spl once. until you flash stock-spl (that's not stock-rom!) it remains there forever.
- regardless if flashing via usb or microsd, the filetype has to be .nbh
- looks to me as if you didn't change the filetype of the image, but just the filename. so it actually is "kovsimg.nbh.image" right now, which will not be accepted by bootloader (the tricolor-screen-thingy).
check these two things before flashing again:
1. check if hard-spl was successfull:
take your sd-card out, and enter bootloader. it will now stay on tricolor screen. there it should read "SPL-0.72.OliNex". (among other stuff)
if it reads "SPL-0.72.0000" or "78" you haven't succeeded in hard-spl -> read the sticky again.
2. check the filetype of your image-file:
get your windows to show filetypes (how depends on which version, google it) and make sure the file's name is really just "kovsimg.nbh", nothing more.
(via usb-cabel it has to be "ruu_signed.nbh", btw)
put the kovsimg back on your sd-card (directly to root, meaning not into a folder), put it back in and enter bootloader again. follow the instructions on screen.
if you followed these instructions correctly, it will work now.
to flash any other roms in the future you just have to name the file right and put it on your sd-card -> bootloader. (again, hard-spl will not be needed.)
after flashing finished do a hard-reset! when flashing via sd you have to take the battery out and back in to do a restart. that's the perfect moment:
- take battery out
- put it back in
- press and hold (!) the two silver-buttons under the screen
- press the power-button shortly (while still holding the two silver ones!)
- phone will vibrate and enter a white screen
- release the two buttons and follow instructions on screen

When you downloaded the ROM did you make sure to extract it first with either WinZIP or WinRAR before you renamed the file? ALL ROMs are compressed usually with WinRAR to save time uploading. Then you download and extract the file. Then you rename the image file to the respective name on how you wish to flash your phone.

Thanks for the replies but the problem is still here :/
I checked the bootloader and it said "SPL-0.72.OliNex", which means I have installed the HARD_SPL correctly.
Atm I have Energys rom installed, but I didnt install it the same way as this way I am trying to do now. I just had to have the cable checked in and follow an installation and it was done.
Right now I have tried with several roms but none has worked, for the moment I am trying to get this rom to work "Valkyrie_v3.8 FireStorm" without success ofcourse..
I did everything correct, I know that I have. I also followed a video guide to check I made it correct.
The file name is kovsimg.nbh (Ive checked it and it is a .nbh file, my brother also confirmed it).
When I try to flash it, the USB cable is out, the phone is shut (tried to pull out the battery 2), but still the same problem "No image file!".
And yes, I did first extract the file. The size has the same amount as in the winrar file so nothing is missin. After that I changed the file name and copied it into the root of Memory card.
PS. Is this the only way to flash it, I mean is it not possible to do the same way as I did with energy's? (Its the same way as installin HARD_SPL)

Try using a different SD card.

Im Packing said:
Try using a different SD card.
Click to expand...
Click to collapse
Befor this make sure your microSD is Formatted to fat32 using a PC. If not, it will not work.

or you could just do it the same way as the energyrom
i.e. customRUU.exe

well, sounds like it's your sd-card. probably formating it again with fat32 will help. there are also reports of some sd-models/brands not working at all. there's a thread for this by gtrab, i think. although there it says "kingston" cards don't work at all - i'm flashing with a kingston 8gb for almost a year now... ^^)
if you choose to get customruu.exe for usb-flash DON'T use the one from hard-spl, that's a special one.

try remove SD card and flash without PC

The SD-cards format is Fat32, but I used a different way this time by doing as Jonny~ mentioned and it worked all fine!
Thanks for the help, great service.
Take care and wish me luck in the future with my xperia

[Q] how to install android on HTC Td2

hello there im looking for a step by step guide on how to install android (the latest version) on the HTC touch diamond 2.
Im a complete noobie when it comes to custom OS's/ROM's and i find that alot of people explain the instructions fully, For example which files i must download where to put them etc etc
Basically im looking for someone to explain what files i must download, Where to put them etc.
Any help will be very much appreciated as like I have said i no nothing of custom OS's/ROMs but i used to have the T-mobile G-1 and i prefered and still prefer android to Winmo
so any help will be much appreciated.

alexterry said:
hello there im looking for a step by step guide on how to install android (the latest version) on the HTC touch diamond 2.
Im a complete noobie when it comes to custom OS's/ROM's and i find that alot of people explain the instructions fully, For example which files i must download where to put them etc etc
Basically im looking for someone to explain what files i must download, Where to put them etc.
Any help will be very much appreciated as like I have said i no nothing of custom OS's/ROMs but i used to have the T-mobile G-1 and i prefered and still prefer android to Winmo
so any help will be much appreciated.
Click to expand...
Click to collapse
Download it man, and unzip it in the root of your SDcard , then run the HARET in your PDA... its all

i have download there seems to be only 1 file ive put it in the root of my SDcard but i cant find a file for haret maybe a link could do
also which files must i download becuase ive only download the System pack in Post #4 and like i said there is only 1 file there

I'm also a noob, but I figured it out.
1. download the other file on post #4. The "bundle."
2. open up windows explorer, if you're running windows, so you can open up the SD card. Make sure it's formatted in FAT32 (right click on the SD card in explorer and look through the properties, or just click "format."
3.unzip the bundle file, there should be a folder named "andboot" in it.
4. copy everything from "andboot" and copy it to the SD card.
5. Go into the folder, in all the junk you just copied, called Startup Config.
6. Find your model, "Topaz" and copy the statrup.txt file, not the other one.
7. Go back up to the top of the SD card and paste it there.
8. Disconnect the phone, and go in through file explorer and run the file Harnet.exe on the SD card.
It will take some time, but it should all boot up fine.
Watch the video, it should help, if not, ask more questions.
(it wouldn't let me post the link, so search youtube for TheDeadCPU and watch his video on XDAndroid 2.2)

RedCrow101 said:
I'm also a noob, but I figured it out.
1. download the other file on post #4. The "bundle."
2. open up windows explorer, if you're running windows, so you can open up the SD card. Make sure it's formatted in FAT32 (right click on the SD card in explorer and look through the properties, or just click "format."
3.unzip the bundle file, there should be a folder named "andboot" in it.
4. copy everything from "andboot" and copy it to the SD card.
5. Go into the folder, in all the junk you just copied, called Startup Config.
6. Find your model, "Topaz" and copy the statrup.txt file, not the other one.
7. Go back up to the top of the SD card and paste it there.
8. Disconnect the phone, and go in through file explorer and run the file Harnet.exe on the SD card.
It will take some time, but it should all boot up fine.
Watch the video, it should help, if not, ask more questions.
(it wouldn't let me post the link, so search youtube for TheDeadCPU and watch his video on XDAndroid 2.2)
Click to expand...
Click to collapse
yeaaah it all working but haret is asking for something too run even though ive put startup.txt in the root of the sd card sorry its asking for a script / pathway

hi
is it possible to install android on htc p3470(pharos)?

Have you figured it out yet? It should ask you if you want to run Haret. I'm not sure exactly what you mean, could you explain?

well when i click on haret.exe it asks to run something

Still not working
Hey guys,
I have followed the instructions, but when I click on haret.exe it turns my mda compact IV off, but when the phone starts it just starts windows mobile and no android at all. I don't knw what to do? Please help!
Alan

I installed the XDANDROID 2.2 on my HTC DT2. It works fine the only BIG problem I have is I can't type in the terminal emulator for some unknown reason.
I tried everything and don't know what to try anymore.

Can someone help me convert this ROM ASAP?

My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!

Dragonmaster0430 said:
My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!
Click to expand...
Click to collapse
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!

if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom

groove6969 said:
if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom
Click to expand...
Click to collapse
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?

If you are on AT&T, you have to restore the stock ROM or you will be charged. You also need to restore the SPL.

Problem
I flashed abck to default stock rom some time agon and they voided my warranty just because id didnt return to stock spl. They are full of nonsense over here

i have done numbers of returns of from tilt 1 too the fuze and the tilt 2 for warranty exchange and never had a problem but if u feel confortable follow the steps from the previous post to conver the file over just extract the file and then convert the name over to rhodimg for the nbh filr and put to ur main root of the sd card and flash it that way it will install the stock rom

Doo Doo said:
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!
Click to expand...
Click to collapse
When I right-click on it, i dont get a option for "Extract"

Dragonmaster0430 said:
When I right-click on it, i dont get a option for "Extract"
Click to expand...
Click to collapse
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?

Doo Doo said:
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?
Click to expand...
Click to collapse
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though

Dragonmaster0430 said:
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though
Click to expand...
Click to collapse
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It

Doo Doo said:
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It
Click to expand...
Click to collapse
ok so I got the file on my SD card, but I forgot the button combo to flash it, I get to the tricolored screen then it takes me to the hard reset. What button combo do i need to flash?

Think i got it!

Just let us know when you need help with flashing back to stock rom btw with the stock rom that was just updated for the AT&T with sense it has a lot of problems so you may want to flash it as soon as you get the replacement.

Dragonmaster0430 said:
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?
Click to expand...
Click to collapse
Just make sure to flash stock rom and respl your phone if you hgarsled it. coz spl voids the warranty.
it doesn't matter how many softwares you have on your phone when i sent my phone i had spbmobile shell installed on it plus nitrogen core player and all the crap so it doesn't really make any difference.
my phone had a little crack near usb and when they asked me i said nothing is wrong with it there is not even a small scratch on my phone

Update C432B564-FULL DUAL-SIM

Hi guys, I got message about new update on B560
I downloaded it and i'm going to give update.zip to you guys instantly when i have finished uploading file with my slow network.
If someone gets link before me. Link it here and i will edit it to this message
Model: ALE-L21
Android: 6.0
EMUI: 4.0
Firmware: B564
Build: ALE-L21C432B564-FULL
Region: Europe
Status: Official
Type: Full
Size: 1,48 Gb
Download
https://mega.nz/#!SU93FKwA!aa7rt_ToeplclhAPZ9XzeyLUZX9c5vV1EQiOfXFUHWQ
Installation
NOTE: I DON'T TAKE CARE ABOUT ANYTHING THAT MAY HAPPEN TO YOU PHONE!
YOU DO THIS AT YOUR OWN RISK
Normal upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card. Check if the whole file list in sdcard,
Insert the Micro SD card into the handset and power on. After entering call -> enter:*#*#2846579#*#* -> ProjectMenu -> Software Upgrade -> SDCard Upgrade-> OK.
Force upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card. Check the file list is right.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically.
## Changelog ##
This update improves system performance and stability.
[Fixes]
Fixed an issue where 1080p videos can't be uploaded to Twitter.
Fixed an issue where Huawei Watch occasionally doesn't receive messages.
Fixed an issue where some UI elements are displayed incorrectly.
[Optimizations]
Improved system performance and stability for smoother operations
Improved device security with latest Google security patches.

Vika__ said:
Hi guys, I got message about new update on B560
I downloaded it and i'm going to give update.zip to you guys instantly when i have finished uploading file with my slow network.
If someone gets link before me. Link it here and i will edit it to this message
Click to expand...
Click to collapse
Thanks for sharing this ROM bro. I need this to cooking custom :cyclops:

Uploaded almost 200mb to Mega.
So sad that i have ~200kb/s upload speed but. Have to go what i have
If someone afterwards uploads this somewhere else server. Give link to me and i will put it in first post

Got this as update on B550 as well! Updating now.
Edit: Contains Pro camera mode! No light painting though.

Download link online

Vika__ said:
Download link online
Click to expand...
Click to collapse
downloading.
thanks

can someone share a screen shot of the pro camera mod ?

AmINoS007 said:
can someone share a screen shot of the pro camera mod ?
Click to expand...
Click to collapse
http://i.imgur.com/Xx9O3wG.png

i'm in b550 and receive update to b564, size 213 mb

but I dont know how to use it.

where is the UPDATE.APP file? i extraxt it from zip and there is many many file.

MyGalaxysIII said:
where is the UPDATE.APP file? i extraxt it from zip and there is many many file.
Click to expand...
Click to collapse
Update app is inside the zip. You don't need to bother those other files.

Thx guys for the pics

does OTA work on twrp recovery??
i received OTA update but i am on TWRP recovery

For me it worked but i don't promise it will work for you
Edit: but remember if it works. Update still installs stock recovery so you have to flash twrp again

Vika__ said:
For me it worked but i don't promise it will work for you
Edit: but remember if it works. Update still installs stock recovery so you have to flash twrp again
Click to expand...
Click to collapse
i already downloaded the zipped file.. how can i flash that??
do i need to extract it and flash via adb or just flash the zipped file
P.S. i switched back to stock recovery

Installation methods are on first post

OTA update is taking too long to download..
72~100 K/s...
Sent from my ALE-L21 using XDA-Developers mobile app

Since we're pointing out changes, Spotify now shows album covers on our lockscreen just like the native music app.
Really cool! The fact that it showed info on the current song that was playing but not the album cover was bugging me a lot.

I am stuck at 19%.. It's been 10 minutes already.. I tried local update (from @sokkoban's blog)...