Pleas help not upgrade rom,error 302.
I think I've got the same Problem. when I try to install the official ROM UPGRADE AKU 3.3 always at 80 % the Loading indicator gets red and i get an 302 connection error. I don't know what to do.
Related
I have upgraded my i-mate PDA2K with de file (from i-mate web site) BA_CDL_12203_ESN_177_10600_SHIP.exe a few weeks ago and everything went right, but a few days ago I had problems with the phone (I couldn't receive SMS and no GPRS connection could be stablished) and after a warm start, the blue i-mate screen showed "No GSM" instead "R 1.06.00" so I decided to re-install de update file. This second update process stops with "ERROR 114 – RADIO ROM UPDATE ERROR" when it's trying to update the radio ROM. I have tryed to install the last radio rom version (1.10.00) and the previous one (1.02.00) with no success at all, always the same ERROR 114....
If I install only the ExtROM the device comes to life and the phone seems to work but GPRS doesn't work and when I try to upgrade or simply reinstall only the radio ROM I always get the same ERROR 114....
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running.
Thanks a lot.
yes please any body say why Error 114 ?
I cant update my IMATE T-MOBULE with USB, I see error 114 in differend percetanges
thx
Popito
1) Have you tried the 1.12 of wiki and have you fixed it with the fix.bat as per getiting started on wiki ?
2) are you saying that the install of the BA_CDL_12203_ESN_177_10600_SHIP.exefails even though you were able to instal it in the past.
does anyone know why this happens?
has anyone found a workaround?
i think this rom work well... i using about one week
most modern roms take 10-15 mins to pass from 98% to 100%...so wait...and wait...and wait...
Ditto
You gots to wait!
i should still wait 15 minutes after the computer says 100%
it has been 15 minutes and still at 99% how much longer
the update utility says congratulation! wtf
20 minutes and i am almost ready to flashback?
whats the problem? what roms haved you tried updating from i,ve tried
2.26 2.3 and 3.2 rc1?
both in the computer and the wizard it stay at the same number, if the computer finished be4 then there is a problem...
Whats your IPL/SPL version number?
had the same problem,
and wasn't patient :$
now i get stuck in the boatloader :s
another upgrade isn't a go since i itz not connected
to active sync?
is there a way out :s
haha, you don't have to be connected to activesync.
Just boot it in boot loader mode and plug it in. You can flash like that.
That's actually how I do all my flashes.
I am just on bootloader ...
itz stuck there :s
any reponse
i would like to try flashing again any ideas because it didn't work the first five times.
Me too
I have a G3 T-Mobile wizard (no .001), and it stuck at 99% with the PC version saying finished. I waited 25 minutes, gave up (there is a battery issue!) and reflashed with Molski's 2.26.
how can u flash it again?
I am in bootloader and stuck there no updates work nothing :s
prestonmcafee said:
I have a G3 T-Mobile wizard (no .001), and it stuck at 99% with the PC version saying finished. I waited 25 minutes, gave up (there is a battery issue!) and reflashed with Molski's 2.26.
Click to expand...
Click to collapse
If you have .0001 then you have a G4 Wizard and NOT a G3 Wizard.
Molski
no no
molski said:
If you have .0001 then you have a G4 Wizard and NOT a G3 Wizard.
Molski
Click to expand...
Click to collapse
Yes, but I have "no .001", which should have been "no .0001".
Is your rom the same as T-Mobile 2.26 if I don't install the extended rom? (I install my own extended rom manually.)
Kartboy: As goldrush98 said, you don't have to be connected to activesync. If you see "usb" on the tri-color bootloader screen, just start the rom flash program and it will flash the new ROM. Worked for me.
please stick to topic
the topic is ell AKU 3.2 rom 99% crash not ell AKU 3.2 rom ipl/spl
i do not think the crash has to do with ipl b/c i know i have a G3
where is the developers response
Same issue here.
I have the same problem here. Mine gets to 99% on the phone and the computer says it's done. I've waited over an hour for the phone to finish.
ok im having problems uploading this rom... i keep getting error 260 on every rom. i tried to change it from 3.3 v1...it seems that the only thing its alowing me to do Is degrade every rom... i went from 3.3 to 2.24(moliski's version) succesfully. From 2.24 i tried to up date to 3.3 v2 unsucessfull. Then i tried to update from 2.24 to 2.26(moliski's version) unsucessfull. Then went from 2.24 to 1.05 and it work successfully. From there i went from 1.05 to faria's 3.3 v2 and it didnt work, i kept getting error 260 on the computer when its in the IPL SPL with the 3 colored screen on my phone. and now im stuck on 1.05... i dont know whats going on and i asked for help b4 but no one helped. Every flash procedure i did was right (including cid unlock etc) PLEASE CAN ANYONE HELP MY POOR WIZARD ;-;
1.05 to 2.X to 3.3
You need to upgrade from 1.05 to a 2.X before going to 3.3
have you considered that you may have a corrupted rom?
download again.
and please try to title your problems accordingly. ...lets not spread rumours[farias 3.3 v2 problems.... ]
you are having trouble upgrading your device...not problems with the rom itself.
thanks.
here is your new title
unable to upgrade to faria 3.3 v2...help welcome.
Hi All, tried to updrade charmer to touch flo ver2.1 but had error that host disconnected, now will only boot to tmobile splash screen with this info (noticed os has changed but cant remember original) also tried soft and hard resets to no avail
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
I can also boot to the three colour screen and it recognises when the usb is plugged in but i cant seem to flash anything, i have tried a number of RUU but get different error messages, mostly that i need a newer upgrade tool or invalid vendor etc.
any help greatly appreciated
UPDATE: managed to flash this rom, (charmer_wm6_vlono_004.4) says all was ok but still stuck in tmobile boot screen??? info still the same
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
HELP!!!
UPDATE: Managed to load latest tmobile charmer rom RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
Will i be able to load touchflo 2.1 now?
cheers
i got the same problem and i fixed it^^
1. i started charmer in bootloader mode (press and hold power button while you reset with stylus)
2. i installed T-Mobile AKU 3.3 from handy-faq.de
3. i installed [vlodeck TouchFLO WM6 ver. 2.1]
works perfect^^
http://www.handy-faq.de/forum/htc_charmer_download_157/
Nokia 3650 said:
http://www.handy-faq.de/forum/htc_charmer_download_157/
Click to expand...
Click to collapse
oh yeah.. i forgot
I used a crude method of fully charging the battery. I downgraded to the default T-mobile ROM that came with the unit. After the flashing process, was complete, the unit rebooted (as it was supposed to), then switched itself off after showing the SPL/IPL data for about 3 seconds.
The battery, was fully charged in a universal charger. To get it to turn on again, I have to remove the battery for a few seconds. A hard reset, doesn't fix the problem. I can still enter the boot-loader though
I've tried all the various ROM files on this site, with no success. Any suggestions?
I've PMed you saying that you can try flashing WM5 prophet rom. It should work.
Thanks for the PM. Unfortunately, the propht ROM produces the same result.
Hi!
Help please!
My MDA compact II was died!
IPL 1.13
SPL 2.06.0000
GSM 01.15.20
OS 2.6.2.27
This is incorrect!
I don't know what is that?
I am in a mess!!!
Help please!
mine died too
when I try to install AKU 3.3 always at 80 % i get a 302 connection error
I tried to update the ROM of my T-Mobile MDA Compact II to the official T-Mobile AKU 3.3 but at 80% the loading indicator turnes red and a connection error (-302) occures.
The Device only shows the color screen with the IPL (3.08) and SPL (3.08)
HELP ME PLEASE
roflkatofl said:
I tried to update the ROM of my T-Mobile MDA Compact II to the official T-Mobile AKU 3.3 but at 80% the loading indicator turnes red and a connection error (-302) occures.
The Device only shows the color screen with the IPL (3.08) and SPL (3.08)
HELP ME PLEASE
Click to expand...
Click to collapse
I was facing same problem in my Dopod Solution 4 this is
1. Charge the Battery Full
2. Use original ROM to Flash the Phone
3. Check the Below Picture ..4 me this worked ...Hope it helps u
Charge your battery 100%