I got MS Voice Command for WM 6.1 configured and working as per instructions on this forum. However, I'm having extreme difficulty getting it to understand anything well. I'm a native English speaker, bland accent, but even getting it to understand 'Help' is difficult.
Anyone have the same problem? And solution???
Thanks,
Mike
Dang, no-one else with any problems getting Voice Command to recognise their voice?
Related
Does any one know where can i find "voice dial" utility for MDA III English version
I'm using Vito VoiceDialerPE and it works great
Hi,
the English ROM for the MDA III (which is IMHO german, it's sold under different names outside of Germany) is the one for the i-mate... this version doesn't not have voice dialing integrated, you will need to buy additional software. I use MS Commander and like it a lot... it's a little hard to use in public as the commands are not always recognized right away, but it still is pretty good.
Treo
Fonix Voice Central works well.
Voice Recognition Software
I have just downloaded VoiceCentral V2.0 just started to use it, but it seems you have to train it if anybody could give me some pointers on how to use this software while i am driving, coz so far it's not been that accurate for me (only had it a week).
Also, if anybody wants it, i could upload it for you to download and try out?
Al
I use MS Voice Command, works straight out of the box with no training.
Controls most the major features on device by voice
FonixVoiceDial http://forum.xda-developers.com/viewtopic.php?p=88221#88221
Couple of questions about voice-dialing in WM5.
I purchased MS Voice Command 1.5 and loved it on 2003SE, but:
1) Does it work with the latest WM5 ROMs?
2) Is there a way to initiate a command from a BT headset?
Not concerning MS VC:
3) What other options are available, and what are the best?
Thanks!
1. At the moment MS Voice Command 1.5 does not work in the new WM5 AKU ROMs (at least it didn't last time I tried!!)
Once you install the app it runs once then states there's been an error and refuses to run again!
2. Within WM2003SE if you have the A2DP profile set with your headset (assuming it's stereo?) then you can initiate a call/command via BT, I used it quite a bit...
3. Alternatives are the following:
Cyberon Voice Dialler (I don't like this as you have to record all the voice tags as there is no speech recognition engine.
VITO Voice2Go/VITO VoiceDialler (I liked this in its previous incarnation but haven't tried the new version with 2K3 or WM5)
If you search the forum for Voice Command you'll find plenty of threads about getting these apps working, and working with BT...
Thanks for the response. I'll search the forums and see if there is anything else that I can find.
FYI, I just have a headset that supports handsfree (Jabra JX 10).
I love cyberion voice commander just becaues it doesn't make all the voicetags itself. I think this is why the device is called a pda with the P for Personal, everyone his/her own opinion.
Since english is not my native language and voicecommander always want to make it sound as english it's not good for me.
And suggsjc i love your signature "If the world didn't suck, we would all fall off..." . I borrowed it several times now to friends of mine, interpreting it as a positive thought
Well I guess to each their own. I (P)ersonally liked it having all of the tags created for me. I could find a contact that I rarely used (and wouldn't have created a tag for) with just using voice commands. But having the choice is a good thing.
Despite the glitches with some software in WM5, overall I am very pleased. Much nicer and more refined than 2003SE.
Glad to hear that my sig is popular
After messing around with numerous reg tweaks etc to try and get my headset button to initiate Voice Dial I could not get it to work, in fact I recked my install of WM6 in the end. So yesterday I did a complete re install of WM6 (Orwell Edition) And set everything up the way I like it.
Then I installed the latest MS Voice Dial 1.6 and BOING it WORKS!!!
No reg hacks needed. This is the first time ever I have got my headset to work with MS Voice Dial
Now my life is complete! This was the last little annoyance I had with WM6.
I am happy to say this is with out a doubt the best rom I have ever used.
Jules
Whahahahaha OK i found one bug. And I laughed so hard I almost fell of my chair!
I press the headset button and say "What Calls Have I Missed?"
Wizard Replies "2 Million Six hundred Thousand and sixty eight missed calls!"
Wow but Im one popular guy huh
Jules
Edit
On the next missed call request all seem fine again "You have no missed calls" hmmm gues no one loves me afterall :-(
I have tried reinstalling the cab file and, although it works, it actually causes problems with the SIP! Following the re-installation of voice command, changing the SIP takes for ever! Does anybody have a better solution or a solution for the SIP delay after the CAB Installation? Thanks
I just checked and there is a delay, I only use Resco Keyboard as my SIP so this is not an issue for me. Hope someone finds a solution for you though
Jules
Here is something really wierd! :S Installing the cab solves the BT activation problem but causes the SIP change to be dead slow. I then proceeded and exported all registry entries. Hard reset the machine and import the registry entries previously exported and copied the VC files into C\program files. Soft reset and BT works and also SIP change is as fast as without VC! :S Can anyone explain this?
I would like somebody to cook wwe crossbow rom without Microsoft Voice Command because it's not licensed.
ZaJules said:
After messing around with numerous reg tweaks etc to try and get my headset button to initiate Voice Dial I could not get it to work, in fact I recked my install of WM6 in the end. So yesterday I did a complete re install of WM6 (Orwell Edition) And set everything up the way I like it.
Then I installed the latest MS Voice Dial 1.6 and BOING it WORKS!!!
No reg hacks needed. This is the first time ever I have got my headset to work with MS Voice Dial
Now my life is complete! This was the last little annoyance I had with WM6.
I am happy to say this is with out a doubt the best rom I have ever used.
Jules
Click to expand...
Click to collapse
Hi guys,
fink ive missed something here. voice commands using bt with msvc and wm6 were not working as i know. did u install any fix?
MS Voice Command instead of Cyberon Voice Commander for AT&T Tilt with Alex's ROM?
Hi -
I have an AT&T Tilt, unlocked thanks to jocky, and running Alex's ROM (v5.HTC.181).
I'd like to replace the Cyberon Voice Commander which is in Alex's ROM with Microsoft Voice Command.
I *think* that the AT&T Tilt, by default, did have Microsoft Voice Command on it, which suggests that I have an implied license for it... right? (And I did buy Voice Command 1.6 SmartPhone for my earlier S620, so I have probably double-paid for it anyway...)
So, how do I get that original piece of AT&T-installed software back on this device after having flashed Alex's ROM?
I just prefer MS Voice Command's ability to search Contacts by sound, over Cyberon Voice Commander's requirement to voice tag individual contacts.
Thanks
-Jay
Jay
I do not think that MSVC shipped with the Tilt
to put it on your Tilt, just install the 1.6 that you purchased. I have it and the other one on my phone. I don't find the Voice Commander to recognize my voice commands as well as MSVC.
Uh, I had some trouble getting it to work, and frankly, I'm not sure what I did to get it working. I did do these things:
I had installed the patched MSVC files. (search for VOICECOMMANDREPLACEMENTFILES )
I also installed the OEM_Assign_PTT_BUtton.cab, but I'm not sure it is necessary. I'd hold off on that until last resort.
Maybe it will work just by installing it, and the replacement files. I had installed the additional memmaid apps and uninstalling them was one thing I did too.
Sorry, I can't be more exact.
Thanks, that did get Voice Command on and mostly in place of Cyberon Voice Commander. Still working on getting the bluetooth headset button to launch Voice Command.
-Jay
The launch wiht the BT headset was exactly what I had problems with. Again, I got it working, but sadly, I don't know how.
My MSVC worked straight after install..except that I do not get a call waiting tone after installation. Nobody seems to have a fix...2 of my friends with kaisers all have the same problem and we all have different roms.
This thread really worked for me. http://forum.xda-developers.com/showthread.php?t=337501
There are two versions of MSVC in the forum and they both have the same version number. I found that it was impossible to get the 4MB variant to work even with the regedits. (This is the version that you have to go into Programs and enable/save/ etc.) The other variant is only 3MB and has worked on every ROM I have installed it to using the directions in the above thread and no regedits are required.
Hope this helps...
It does not recognize my writing style well enough for me, after doing a search I came across penreader, has anyone tried this? Also - does anyone have a suggestion for a better than stock ms voice command?
thx( if i get any replies)