Database Develop

Radio ROM 2.25 on FTP

Stupid question, but is that 2.25 radio ROM on the /Uploads/Wizard directory on the FTP from the Cingular ROM, or is it the T-Mo ROM? I'm curious because there are numerous reports that the Cingluar radio ROM is "better" than the T-Mo one.
Thanks!

This is definately the Cingular version (I know because I made and used it).
Replaced the link with one that Mr Paditiot (first name Stu) can't delete!!!!

does that mean I can use this for tmo as well?

LordPhong said:
does that mean I can use this for tmo as well?
Click to expand...
Click to collapse
Using that Rom Update will only flash the GSM (Radio Rom) to the latest Cingular issued version 2.25.11.
It should work with any carrier.

oh nice
So I can basically install any rom I wanted and then load this radio rom afterwards to get the excellent reception I was getting with 2.25?
If so I could go back to 2.3

Stangs55 said:
oh nice
So I can basically install any rom I wanted and then load this radio rom afterwards to get the excellent reception I was getting with 2.25?
If so I could go back to 2.3
Click to expand...
Click to collapse
EXACTLY!!!!

kyphur said:
This is definately the Cingular version (I know because I made and used it).
ftp://xda:[email protected]/Uploads/Wizard/Cing2.25.11_Radio_Only.zip
Click to expand...
Click to collapse
Thanks a lot! I was looking forward to it. I flashed my phone already, but I have yet to see any positive/negative effects. Of course, just sitting down at my desk, I don't think I will see any difference

This thing is beautiful...
I left my phone connected via USB on my desk for about 5 minutes to check signal strength before and after this update. Before, I had 2 bars. I ran the update, didn't touch the phone, let it reboot, and now I'm at full bars. Outstanding.
I get reception with this radio rom update that I can't get with any other rom I've run (except 2.25 of course). 2.25 was too buggy for me too keep on my phone so I was sad when I had go back to 2.17. Then 2.3 came and I was excited b/c I thought the bugs would be gone...and they were, but so was my reception. Now I get the best of both worlds.
Updated your 8125 to this seems like a no brainer to me regardless of what rom you're running.
THANKS!!

Losing stuff?
Sorry for this if this is a dumb question.
If I run the update utility, will I loose any stuff on the phone?
Or will this only overwrite the radio rom and keep the rest of my phone intact....
I don't want to install all my apllications like it's a hard reset....
Can someone please give me the "go" to install this to my qtek 9100 rom?

kyphur said:
This is definately the Cingular version (I know because I made and used it).
ftp://xda:[email protected]/Uploads/Wizard/Cing2.25.11_Radio_Only.zip
Click to expand...
Click to collapse
Did you change the filename? The only one I see now in the Uploads/Wizard folder is: "wizard_radio version-2.25.zip" Want to make sure that's yours and not some crap that will brick my phone! Thanks for isolating this out!

jorge_culv said:
kyphur said:
This is definately the Cingular version (I know because I made and used it).
ftp://xda:[email protected]/Uploads/Wizard/Cing2.25.11_Radio_Only.zip
Click to expand...
Click to collapse
Did you change the filename? The only one I see now in the Uploads/Wizard folder is: "wizard_radio version-2.25.zip" Want to make sure that's yours and not some crap that will brick my phone! Thanks for isolating this out!
Click to expand...
Click to collapse
Apparently someone has deleted it!
Replaced the link with one that Mr Paditiot (first name Stu) can't delete!!!!

It is gone again.

yup, and that's a shame

Re: Losing stuff?
p50kombi said:
Sorry for this if this is a dumb question.
If I run the update utility, will I loose any stuff on the phone?
Or will this only overwrite the radio rom and keep the rest of my phone intact....
I don't want to install all my apllications like it's a hard reset....
Can someone please give me the "go" to install this to my qtek 9100 rom?
Click to expand...
Click to collapse
Likewise, can someone please confirm this will only update the Radio ROM? The warning message for the ROM installer says that all setting will be wiped!
BTW, I found the file in the Upload folder - /upload/wizard/ROMS/Cingular_2.25.11_Radinly.zip

it wont wipe your settings, i just flashed mine last night.

Sweet! Just ran the update on mine and can confirm all settings, data apps etc remained untouched! My Radio version has now increased to 02.25.11 and Protocol increased to 4.1.13.12. All other version numbers (ROM etc) remain as they were before.
Thanks guys!!

irablumberg said:
It is gone again.
Click to expand...
Click to collapse
I don't know who keeps on deleting the file but I can't sit here all day uploading it over and over again.
Replaced the link with one that Mr Paditiot (first name Stu) can't delete!!!!

Maybe I can get a response here... I'm on GSM 2.25.11, but I'm having an issue with dropped calls left and right whereas I had no issue on the original ROM that came with the phone. After a couple of minutes, especially when people call me the connection just drops.
I've never believed Cingular has the fewest dropped calls as they're currently advertising, but i dont believe this is their problem either.
Any ideas?

kyphur said:
irablumberg said:
It is gone again.
Click to expand...
Click to collapse
I don't know who keeps on deleting the file but I can't sit here all day uploading it over and over again.
Replaced the link with one that Mr Paditiot (first name Stu) can't delete!!!!
Click to expand...
Click to collapse
Spoonter is right, I think kyphur is posting a bad link. Try:
ftp://xda:[email protected]/Uploads/Wizard/ROMS/Cingular_2.25.11_Radio_Only.zip
Kyphur, can you confirm this is your file (2.16 Mb)?
[Edit] to fix the link I mistyped...

since i stopped using weather panel, i haven't had a single dropped call in about 3 months now. and i'm using cingular.

8125 Dropping Calls -- Radio ROM Upgrade?

Hello all,
I've upgraded my Cingular 8125 device to the latest official ROM from Cingular/HTC. These are my current versions:
ROM Version: 2.25.11.1 WWE
ROM Date: 5/11/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM Version: 2.25.11.102
However, I've noticed that at least once or twice a day when I'm on a phone call, my call is suddenly dropped! I have to wait a few seconds before I'm able to make calls again. My guess is that there is something funky going on with the radio version that I'm using. Is there a later (more stable) radio ROM that I could upgrade to? Notice that I have my device configured quite well and I wouldn't want to wipe it out entirely again (as I already did to upgrade to the latest 2.25.11.1 Cingular-approved ROM). Is it possible to just upgrade the radio ROM without having to wipe my device again? If so, which radio ROM should I upgrade to, and where is it available?
Thanks!
Ryan

Ignore all I wrote, was a bit uninformed
sorry

Look for the 2.47.11 Radio Rom in the Wizad FTP section.
Molski

For the life of me, I can't find that ROM on the Wizard FTP site. Could you please post the path? Thanks!

_Nomad_ said:
I'm afraid that there isn't any way to upgrade to a later radio ROM for the wizard, there are a few later versions embedded in various ROMs available at the forum though there's always a minority of ppl that do experience call dropouts now and again with all of these, so upgrading doesn'y guaranty a solution . Best bet would in my opinion still be to hard reset your device and start from scratch... Best of luck
Click to expand...
Click to collapse
Excuse me but WTF are you talking about?
btw, the 2.47.11 is here

way to go Dr Puttingham
I sure do love it when people provide real links instead of "go check this/that".
I have a question also. I am getting my new TMobile MDA from a this seller on eBay
I want to know what I should do first? Do I need to CID unlock, Registry unlock. If so, how and in what order. I plan to use a T-Mobile SIM card so I probably don't need SIM unlock at least for now unless it is required to do some of the apparently needed OS and radio ROM modifications. I got the radio ROM you provided, so I assume I will need that.

trpenner said:
I sure do love it when people provide real links instead of "go check this/that".
I have a question also. I am getting my new TMobile MDA from a this seller on eBay
I want to know what I should do first? Do I need to CID unlock, Registry unlock. If so, how and in what order. I plan to use a T-Mobile SIM card so I probably don't need SIM unlock at least for now unless it is required to do some of the apparently needed OS and radio ROM modifications. I got the radio ROM you provided, so I assume I will need that.
Click to expand...
Click to collapse
From what I gather on here, you'll need to use a CID unlock, but only if you plan on putting an unbranded or custom ROM on your MDA...otherwise it will work find out of the box. Keep in mind that not having any restrictions (CID / Registry) is always preferred

rmlecompte said:
Hello all,
I've upgraded my Cingular 8125 device to the latest official ROM from Cingular/HTC. These are my current versions:
ROM Version: 2.25.11.1 WWE
ROM Date: 5/11/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM Version: 2.25.11.102
However, I've noticed that at least once or twice a day when I'm on a phone call, my call is suddenly dropped! I have to wait a few seconds before I'm able to make calls again. My guess is that there is something funky going on with the radio version that I'm using. Is there a later (more stable) radio ROM that I could upgrade to? Notice that I have my device configured quite well and I wouldn't want to wipe it out entirely again (as I already did to upgrade to the latest 2.25.11.1 Cingular-approved ROM). Is it possible to just upgrade the radio ROM without having to wipe my device again? If so, which radio ROM should I upgrade to, and where is it available?
Thanks!
Ryan
Click to expand...
Click to collapse
I have the exact same setup, with no customizations on my 8125 and am having a terrible time with calls dropping. Did you find the radio ROM upgrade and did it work?
Thanks.

its already been solved in another thread. apparently its the data connection trying to activate 4 min into a call and dropping the call. the fix is a reg change so that data knows to remain suspended.
http://forum.xda-developers.com/showpost.php?p=995659&postcount=272

How to?
Well I downloaded the radio ROM but I have no idea what to do next. I searched the site for how to install the update but came up empty.
Any information on how to install the new radio ROM would be appreciated.
As for the registry edit for data connection I am not sure that this is the solution as the calls drop at random intervals, not 4 minutes. I don't have anything (that I know of) which would be trying to create a data connection anyway.
For the registry edit I would need Total Commander correct? Is it really safe for a Noob like myself to make these changes? I can program a vcr but I once deleted part of my operating system in an attempt to get more disk space on my computer. Now I know better but not a lot better.
Thanks

Read this thread for info about Radio Rom Only Updaters...
http://forum.xda-developers.com/showthread.php?t=268031

Thank you. Looks like exactly what I need. There wasn't the 2.47.11 radio rom in the list there but I will go through those steps to reinstall the ROM that I have and see what I can learn.

I installed the 2.47.11 radio ROM and calls kept dropping. I called Cingular and they assured me it must be the device so they are sending out my 4th 8125. I complained and made a nuisance of myself so they are sending me a free 8525 in addition to the 8125 I have. in the meantime I went to the Cingular store for a loaner so I wouldn't be dropping calls all the time. Even the nokia loaner was dropping all the calls, switched to my unlocked nokia 6820, still drops. Must be the network and not the device.

xda 11s stuck with serial v02.07

help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks

CHALFONTCOURIERS said:
help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks
Click to expand...
Click to collapse
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.

Kasush said:
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.
Click to expand...
Click to collapse
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB

CHALFONTCOURIERS said:
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB
Click to expand...
Click to collapse
I honestly have no idea what that file you have is. Go here and follow the steps to upgrade to WM6:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
You can find several WM6 and WM6.1 ROMs here:
http://forum.xda-developers.com/forumdisplay.php?f=386
Those 2 links should provide everything you will need.

Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob

CHALFONTCOURIERS said:
Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob
Click to expand...
Click to collapse
Are you running windows XP or vista?
Do you have activsync 4.5 or newer installed?
Have you tried putting the phone into bootloader mode (serial/usb on top, version on bottom) and run MA_Upgrade that came with the Helmi files?

Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB

CHALFONTCOURIERS said:
Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB
Click to expand...
Click to collapse
For the phone not working soft-reset. Some say you need to soft-reset twice, but I have never had to. There is a flaw in WM6 that when you disconnect the battery then connect and boot it fails to load the phone module. After booting a soft-reset will load it no problem.
For the wi-fi issue. Goto CommManager and click settings (in the lower right) and then click WLAN settings. Click turn on WLAN. This step loads the wi-fi driver. Now go to CommManager and click on wi-fi and it will work. This step must be done after EVERY reset/boot. But it only must be done once. after that you can turn on and off the wi-fi using only the CommManager as much as you like.
Glad to hear you got WM6.1 loaded and everything though.

Bloatware in ATT Windows 6.1 ROM

I have installed
ROM version: 3.57.502.2 WWE
ROM date: 07/17/08
Radio version 1.65.21.18
Protocol version: 25.88.40.05H
I used the recommend method to have the bloatware not install by removing the battery before customization begins but when the device restarts it resets back to the welcome screen all over again. The only way I was able to more forward was to allow the customization script to finish. Any ideas on how to prevent the customization?

You are supposed to soft reset, not rip out the battery
BTW where did you get this rom?

macman005 said:
I have installed
ROM version: 3.57.502.2 WWE
ROM date: 07/17/08
Radio version 1.65.21.18
Protocol version: 25.88.40.05H
I used the recommend method to have the bloatware not install by removing the battery before customization begins but when the device restarts it resets back to the welcome screen all over again. The only way I was able to more forward was to allow the customization script to finish. Any ideas on how to prevent the customization?
Click to expand...
Click to collapse
I've done the soft reset just seconds before "The device will customize in 3 sec". It worked for me. I don't know how, cause people saying that this doesn't work anymore on WM6.1. But you can try. This works for me.
Cheers,
Chris

I've noticed on a lot of 6.1 ROMS if you press soft reset during the customization phase it actually hard resets the phone and makes you go through the whole process again

Hm, where did you get this ROM from?
macman005 said:
I have installed
ROM version: 3.57.502.2 WWE
ROM date: 07/17/08
Radio version 1.65.21.18
Protocol version: 25.88.40.05H
I used the recommend method to have the bloatware not install by removing the battery before customization begins but when the device restarts it resets back to the welcome screen all over again. The only way I was able to more forward was to allow the customization script to finish. Any ideas on how to prevent the customization?
Click to expand...
Click to collapse

macman005 said:
I have installed
ROM version: 3.57.502.2 WWE
ROM date: 07/17/08
Radio version 1.65.21.18
Protocol version: 25.88.40.05H
I used the recommend method to have the bloatware not install by removing the battery before customization begins but when the device restarts it resets back to the welcome screen all over again. The only way I was able to more forward was to allow the customization script to finish. Any ideas on how to prevent the customization?
Click to expand...
Click to collapse
Where did you get the final release?

He probably got a new Tilt that is shipping with 6.1. If that's the case, I hereby order him to perform a hard reset, and then proceed to dump the ROM for all of use to enjoy.

A friend of mine got one on the 13th with 6.0 on it.
EDIT--
There is a link on ATT's site that gives me the option to download the 6.1 rom for the tilt. I can't download at work though and I'm sure it's been said somewhere that it's a haox or something but here it is.
http://www.htc.com/us/SupportDownload.aspx?p_id=68&cat=2&dl_id=68
Download: AT&T Tilt Windows Mobile 6.1 Software (ROM Version 3.57.502.2 WWE)
Date Updated: 08/05/2008
File Size: Approximately 88 M

macman005 said:
I have installed
ROM version: 3.57.502.2 WWE
ROM date: 07/17/08
Radio version 1.65.21.18
Protocol version: 25.88.40.05H
I used the recommend method to have the bloatware not install by removing the battery before customization begins but when the device restarts it resets back to the welcome screen all over again. The only way I was able to more forward was to allow the customization script to finish. Any ideas on how to prevent the customization?
Click to expand...
Click to collapse
I think this guy is bogus because the radio version an protocol version differ from the supposed specs of the new ROM. So the ROM version should be different.

Im not very ROM savvy. But I think the claim of the poster being non legit is not called for. I have seen this ROM being posted on the HTC site from many different forums. Its sortve official from what I gather, meaning something about a tester ROM(?). Ive seen several places where this ROM was able to be downloaded from HTC. Although it was removed from their site recently.

ProudPop83 said:
Im not very ROM savvy. But I think the claim of the poster being non legit is not called for. I have seen this ROM being posted on the HTC site from many different forums. Its sortve official from what I gather, meaning something about a tester ROM(?). Ive seen several places where this ROM was able to be downloaded from HTC. Although it was removed from their site recently.
Click to expand...
Click to collapse
The ROM in question was never available on HTC's site. There was a page that listed it as available, but the download link pointed to the 1.62.xx.xx ROM update from February 2008.
And I also agree that the non-legit claim was uncalled for.

Perhaps if the original poster realizes that the only way he or anyone is going to get a bloat-free rom is to have a copy posted and someone strip the bloatware out. As someone mentioned, soft reseting before the 3 second timeout produces a hard reset. They must have read this web site. I am a Tilt user eagerly waiting for the release, but I will still have to wait until is is cleaned out, similar to the Almost Official III w/o Bloatware.

ProudPop83 said:
Im not very ROM savvy. But I think the claim of the poster being non legit is not called for. I have seen this ROM being posted on the HTC site from many different forums. Its sortve official from what I gather, meaning something about a tester ROM(?). Ive seen several places where this ROM was able to be downloaded from HTC. Although it was removed from their site recently.
Click to expand...
Click to collapse
You are probably right I should not have made such a call. He indeed may have the ROM. If I may elaborate.
Latest test rom form AT&T
ROM Version 3.55.502.1 WWE
ROM date 06/10/08
Radio version 1.65.20.29
Protocol version 25.88.40.04H
Supposed ROM to be Released at HTC. Click here for link.
ROM Version 3.57.502.2 WWE
ROM date 07/17/08
Radio version 1.65.17.10
Protocol version 25.83.40.02H
HIS version
ROM Version 3.57.502.2 WWE
ROM date 07/17/08
Radio version 1.65.21.18
Protocol version 25.88.40.05H
I would think that if HTC changed the radio and protocol as shown in his version. Would they not change the ROM version such as 3.58.502.2? Even more so because they have created two ROM's on the same date?
It could be possible the the information posted on the HTC web site is wrong, Maybe to possibly confuse us.

I got a brand new Tilt on Aug 21. I had 6.0 installed. I hope the update comes out Monday, but now I'm not sure. The stores here in New Orleans only have Tilts with 6.0.

ourtech said:
...As someone mentioned, soft reseting before the 3 second timeout produces a hard reset...
Click to expand...
Click to collapse
Ummm... no it doesn't.

NotATreoFan said:
The ROM in question was never available on HTC's site. There was a page that listed it as available, but the download link pointed to the 1.62.xx.xx ROM update from February 2008.
And I also agree that the non-legit claim was uncalled for.
Click to expand...
Click to collapse
See I didn't know it pointed to the upgrade earlier this year. I just saw many people had posted about on a few forums.

NotATreoFan said:
Ummm... no it doesn't.
Click to expand...
Click to collapse
I don't wish to disagree with you as you are a much more experienced user than I am, but I flashed the Almost Official III rom and repeated the process 5 times. If you soft-reset before the count down completes it does a hard reset and brings you back to the same spot as brfore and reruns the custom configuration. I tried this before the count down and during the running of the custom configuration with the same results. It is why I then loaded the stripped version. Note, I HAVE used the reset trick very successfully with WM 6.0.

ourtech said:
I don't wish to disagree with you as you are a much more experienced user than I am, but I flashed the Almost Official III rom and repeated the process 5 times. If you soft-reset before the count down completes it does a hard reset and brings you back to the same spot as brfore and reruns the custom configuration. I tried this before the count down and during the running of the custom configuration with the same results. It is why I then loaded the stripped version. Note, I HAVE used the reset trick very successfully with WM 6.0.
Click to expand...
Click to collapse
It won't perform a hard reset, it just brings you back to that same screen over and over and over unless you let it go. That and hard reset are completely different.
One way i found to stop the bloatware loading is to let the customization begin, but as soon as it starts loading the first thing, do a soft reset, it won't restart it again

Not important..

Yusuke14 said:
One way i found to stop the bloatware loading is to let the customization begin, but as soon as it starts loading the first thing, do a soft reset, it won't restart it again
Click to expand...
Click to collapse
You are right. It does not repeat once you start the customization, but I did find some bloatware installed. Perhaps I was not fast enough. But before, when it brings you to the same screen over and over again, it says "clearing storage." It is my understanding that the clear storage program in settings does the same as a hard reset, namely to reset to factory defaults. If they are different, then I am wrong.

Unlocking & related

Well. Last night I tried to unlock my Kaiser. Today something has broke bigtime
I followed the instructions for unlocking it from Olipro. However, I couldn't get it to go past the "SPL 1.93" on the screen or past the Tricolour. It wouldn't pass that stage and thus wouldn't go to Stage 2, and onwards. So ended up at another thread. It was the white screen one. I've managed to download and load JumpSPL1.56-KAIS and JumpSPL1.93-KAIS and once that was done return to the initial instructions and unlock the phone.
It reported all was OK but I've not got another sim to test it in. All was well today but this afternoon a call went to voicemail. When I tried to retreive it, I heard the voice then it made a buzzing noise and cut off.
A couple of soft resets later and turning the network off then on and I get part of the voicemail again, but most the time no sound at all when making/recieiving calls.
I would update to a newer rom but I don't know which one it is.
The following information I have.
Operator Version: 24.328.1.610
ROM Version: 3.28.61.0 WWE
ROM Date: 05/02/08
Radio Version: 1.70 OliNex
Protocol Version: 25.65.30.04H
Under the battery it states this is a Kais130
The options I have would be to contact the service provider and give these details to get a replacement. However, I'm worried that they will notice that the Radio Version is wrong and thus charge me lots of money. Or just complain more. If I can fix it myself I would like this option though because I do want it unlocked....

Soft resetting with the camera button in, gives me the following information:
Security Unlocked
Kais130 MFG
SPL-1.0.OliProf
CPLD-8
SERIAL (futher down).

Try flashing a new radio from here:
http://forum.xda-developers.com/showthread.php?t=393182

denco7 said:
Try flashing a new radio from here:
http://forum.xda-developers.com/showthread.php?t=393182
Click to expand...
Click to collapse
Yeah! But which one do I choose?

Oh, well, um, I'm trying for one now. Except it might take a while. I don't have a small microsd card, only the 4gb one, so I'm copying my data off before I format it to fix what I broke
Thanks for your help

Try 1.65.16.25 it is the one that originally came with your rom.