Hi, maybe the question are stupid, so...
where i can find command for registry?
for example, if I want start a new mms, how I must write?
thx
Franceschiello said:
Hi, maybe the question are stupid, so...
where i can find command for registry?
for example, if I want start a new mms, how I must write?
thx
Click to expand...
Click to collapse
?!?!?! Do you want to edit the registry?
You´ll need to be a bit more specific. What exactly are you trying to achieve??
Yes friends, I woul want try to edit somethings...
for example, in actionscreen (raphael icon) with 9 icons, I woul want change commands...
for example with a button create a new mms. it's not difficult, I know, but I don't know exact command, now i'm able to go in sms/mms and mail menu, but not new...
Related
Hi,
I need some assistance. I am currently cooking my extended rom. My Extended rom does not have enough space so, i am putting some of my MUST HAVE softwares in my storage so that it installs after a HARD RESET.
But, most .cab files will auto delete upon launch. Is there any way to make
it not delete ? Kindly assist.
Thanx a million
You can avoid the CAB files being deleted by making them read-only.
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
i have tried that but, dont work
All my "wanna hang on to" .cab's are write protected, and non of them get deleted upon installation.
Manuel installation that is.
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
ermm.. how do i go about it... i wanna auto install stuff like Pocket Informant , SPB Pocket Plus and my must have s/w upon hard reset
Thats why i need to coookkk
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
bosjo said:
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
Click to expand...
Click to collapse
well, i dont seem to find anything of what i am looking for
Wait a day or two, maybe someone who knows come along.
You can use a software name Cabinst wich let you install a cab without deleting it.
Easy.
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Shikra said:
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Click to expand...
Click to collapse
change which part of it ?
http://forum.xda-developers.com/viewtopic.php?t=16377
M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse
keep the ext rom empty,
after reboot hack the reg to point to new area.
Run the autorun from threre.
Have all files as read only.
info under
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
Only problem is that all cabs are installed in the default location.
I have yet to get cabinstall to run in batch mode using the nscript tool.
Hope its what you are after
Hello.
I noticed pixalated text in certain menus the other day (pics below). all other text looks good. The time when i noticed it happen was when i installed quick menu, didnt like it and then got rid of it. After that i noticed the pixelation. I did a restore to a previous state (sprite backup) and it did not fix the issue.
Is anyone able to clue me in on what might be happening?
Help is much appreciated. Thanks in advance.
Novice Gadget Boy said:
Hello.
I noticed pixalated text in certain menus the other day (pics below). all other text looks good. The time when i noticed it happen was when i installed quick menu, didnt like it and then got rid of it. After that i noticed the pixelation. I did a restore to a previous state (sprite backup) and it did not fix the issue.
Is anyone able to clue me in on what might be happening?
Help is much appreciated. Thanks in advance.
Click to expand...
Click to collapse
u can check wour windows/fonts directory and see if there is some font.
See pic for fonts in folder
Novice Gadget Boy said:
See pic for fonts in folder
Click to expand...
Click to collapse
did u copy them there? If not try to delet them and softreset.
PS: make a copy of them in case u will have to put them back.
no i didnt copy them there. i dont play around with system files unless i have to. I'll try your suggestion and see what happens. Let u know as soon as possible.
Didnt work. This is what happened when i tried to delete the files.
Novice Gadget Boy said:
Didnt work. This is what happened when i tried to delete the files.
Click to expand...
Click to collapse
OK, u cant delete them because the font is in use. But these fonts can be the problem. Unfortunately I dont know how to delete it or if it will work if u will delete them. Maybe u can add some font there, but I doubt it will work. U know, when flash a new rom, in windows/font there are no files. Maybe some program add these fonts there, and this is causing the problems.
Thanks for your help. You were definately on the right path. All i did was rename the files and then delete them, soft reset, and now..... ALL IS OK.
Thankyou for your help!!!
Novice Gadget Boy said:
Thanks for your help. You were definately on the right path. All i did was rename the files and then delete them, soft reset, and now..... ALL IS OK.
Thankyou for your help!!!
Click to expand...
Click to collapse
I am happy to hear that, u are welcome.
Hi!
I want to change the "phone" softkey to contacts (TF3d). I have Advanced Config installed but I cannot find contacts.exe in the windows folder. Is there another way to do that?
I believe you need to make a shortcut to contacts and set the softkey to it.
Code:
32#"\Windows\poutlook.exe" contacts
from http://forum.xda-developers.com/showthread.php?t=340974
Klingan said:
Hi!
I want to change the "phone" softkey to contacts (TF3d). I have Advanced Config installed but I cannot find contacts.exe in the windows folder. Is there another way to do that?
Click to expand...
Click to collapse
Hi Try this start advanced config then menu, more settings, then key mapping.
The problem was that only .exe files was shown, and I couldn't find contacts.exe.
I installed Diamond Tweaker and there I could do it without making a shortcut!
Thanks!
I installed the SPB shell 3on my Xperia and had lots of troubles with it, like no way to goes back to Today panel, no more X functions, and stall....but....I like it...
Now, I reinstalled the Xperia original software, and, if someone could tell me....Before installing the SPB shell 3, what exactly I need to do FIRST?
what Dll or else I MUST install first...
Thanks you
if U using stok ROM RAA1 maybe
try update ROM first
download spb 3.0 from the spb site. Then look up a serial somewhere. had no problems at all
It worked, for me without any modifications... I was on the R1 ROM at that point though.
hello
try to install with the exe file instead of the cab file
the cab file sometime block the x buttons
Xperrier said:
I installed the SPB shell 3on my Xperia and had lots of troubles with it, like no way to goes back to Today panel, no more X functions, and stall....but....I like it...
Now, I reinstalled the Xperia original software, and, if someone could tell me....Before installing the SPB shell 3, what exactly I need to do FIRST?
what Dll or else I MUST install first...
Thanks you
Click to expand...
Click to collapse
after install spb shell 3, clean ur star up at windows, delete all. use explorer.. n soft reset. now u can choose manuali 2 spb shell menu
All of you, many thanks for yours advises, and going to study first what is my Rom number and, if I update my Room from, say 1 to 3, do I still need the number 2? sorry my Rom, but, in Hungarian a Rom, is a gipsy, BTW....
I did not knew, a CAB file instead of an EXE file installer could make a difference.....then? a golden rule would be to use an .exe file instead of a cab file?
ok, going to try it and agin, thanks.....happy am I with the XPA forum....really
GOKILL said:
after install spb shell 3, clean ur star up at windows, Yes, but on the Xperia windows folder ....? not too clear for myself delete all.
sorry delete all. What do you mean? do I need a registry editor?
use explorer.. n soft reset. now u can choose manuali 2 spb shell menu,
sorry again what do you mean by manually?
Click to expand...
Click to collapse
thanks, and going to try also
I have lots of problem when install SPB as cab file. After i use exe file and now work perfect. Why is that i dont know
DiabloSoul said:
I have lots of problem when install SPB as cab file. After i use exe file and now work perfect. Why is that i dont know
Click to expand...
Click to collapse
ok, and what Rom do you have? or use? thanks
then it must be something into the cab file..
Try the trial of SPB 3.0.1, not 3.0. Google to find it. This resolves some issues.
Xperrier said:
thanks, and going to try also
Click to expand...
Click to collapse
no need registry editor, just clean up ur starup.. with file explorer. windows/starUp.. and delete spb mobile shell, in my case i choose dellete all.. coz make faster with starUp the X1. same like a PC.. the X1 might be crash booting if the has a lot program in starUp.
or u can just leave auto config and not dellete this
i'm sorry if my english is not fluently..
GOKILL said:
no need registry editor, just clean up ur starup.. with file explorer. windows/starUp.. and delete spb mobile shell, in my case i choose dellete all.. coz make faster with starUp the X1. same like a PC.. the X1 might be crash booting if the has a lot program in starUp.
or u can just leave auto config and not dellete this
i'm sorry if my english is not fluently..
Click to expand...
Click to collapse
perhaps your english is not fluent like mine, but, also, you are able to communicate with another language and, THAT, is the best...What is your native tongue? mine is french, then after a small english and then a very little hungarian...
thanks for you help sweetie
ring-bearer said:
Try the trial of SPB 3.0.1, not 3.0. Google to find it. This resolves some issues.
Click to expand...
Click to collapse
I will, but, after reading all the helpful post, I just found out my Xperia was still runing on Customization version R15A with the variant generik_uk,
Now after having made the update, I see that I have now the R2AA010, perhaps, this is also why I have or had, who knows trouble.... Do I also must update the generik UK ?
Now, if I like to try WM 6.5 do I must update thru the forum, tho the R3AA? or not? here, I am lost, and yes true cooking is ok with me but Rom and UI are not for me...better some Rhum and Coke...heahh
Now I do wonder if it would be also better to reformat my microcard? because I almost install all softwares into it.....
I flashed my X1 to nX1i ROM (found here) and it's working very well so far.
Hi to all,
i've a htc dream g1 with the last release of ginger yoshi, and i've the problem that with same application the size of screen ins't correct, shown the apps more smaller that real dimension...
Please help me!
PS.
i found this problem since the GY version 1.3
it could be a preference setting for the launcher with the rom...
...
I'm sorry,but i think that insn't the laucher.
It is Zeam laucher and when i go to setting there aren't any option
to set the screen resolution or similar...
Please Help me...
ok, try opening the rom.zip file, than open system folder to find build.prop... open that with a text editor (notepad+) scroll throught the build.prop untill you find a line that says
ro.sf.lcd_density = 160
if it says any other number, than change it to 160
if you dont see the text, than just add it and see if that changes anything when you reflash the rom...
be aware if you are using AmonRA you must sign the rom after zipping it
ldrifta said:
ok, try opening the rom.zip file, than open system folder to find build.prop... open that with a text editor (notepad+) scroll throught the build.prop untill you find a line that says
ro.sf.lcd_density = 160
if it says any other number, than change it to 160
if you dont see the text, than just add it and see if that changes anything when you reflash the rom...
be aware if you are using AmonRA you must sign the rom after zipping it
Click to expand...
Click to collapse
Ahhhhhhh, ok... it also is the Density setting parameter that i've set when flashed the rom...THANKS TO ALL... you're great.
I've also another question, if i don't disturb you:
for the g1 dream can you post me any .zip file for update the phisical keyboard to italian?i try with some files that with other rom are ok (padronfroyo) but with GY it don't work...
Thanks for all!
PS.
i solve the problem directly editing the .prop file without flashing, via abd shell...
Very thanks...
I hope that you help me with the italian layout of phisical keyboard...
casello said:
PS.
i solve the problem directly editing the .prop file without flashing, via abd shell...
Very thanks...
I hope that you help me with the italian layout of phisical keyboard...
Click to expand...
Click to collapse
lol no problem, im actually not sure about the keyboard thing... sorry