Database Develop

SMS Messages:

Anyone else have a problem where they send a message to someone and then the person you sent it to, end up receiving 2 instead? It seems to be all the time. Any ideas? Im with O2 in the UK. Also the annoying LED's on the unit. Sometimes when i do the reg fix it works fine, other times after a h/reset and reg fix applied, the light starts again about 10 mins later, and it seems impossible to stop it......
Help guys
XDA IIs
CE 1.40
Radio 1.12
Ex: 1.40 cooked

Ignore this one, turns out after a little research, if you use SPB Pocket plus close button feature, you have to make an exception for tmail.exe

heres a fix
When an sms is compsed there is an option in the sms settings that will allow you to tick “Use Unicode when necessary” if this option is ticked what will happen either your sms will be sent twice
(for the people who really want know what Unicode is, its software that allows software to see foreign charcthers, such as chines Koren. More info at http://www.unicode.org/)
So just untick the option will resolve the problem. When this option is ticked instead of your charcherts size being the 160 it is dropped to 70 charcheres so as soon as you go over the 70 mark its 2 sms.
To fix this you go from the front of your device
Click on start, then down to messaging.
Tap on accounts in the tab below and then select accounts from the list.
Now tap on tex messages
Now just click Unicode off.
AND there we have it.

Actually, Using the option Unicode when necessary uses Unicode formatting ONLY when a Unicode character is found in the message.
I always put this option on, and when my message contains any Unicode character, it converts the whole message into Unicode (hence the message size will be a multiples of 70 chars and not 160). But if your message is pure ANSI characters (all English) then it will be send as it without using Unicode encoding (160 chars).

RZZKT slaam walicum, bud or just plain hello,
i see your point, only thing is here in the UK when we send an sms it goes through spefic sms centre's on the mobile networks then gets routed through various sms gateways etc etc what happens on the Vodafone network and on orange is when you compose a sms say just right TEST if the unicode option is ticked on then the sms when routed will be sent 2ice, on vodafone iv tracked the process for the sms and we can see whats called sms refernce number and if a phone is sending multipull sms the refernce number will be the same, but from my device(spv m2000-unlocked and office qteck9090) the sms refernce number stays the same so the networjk does not belive its a multipull sms but instead it treats it as the device is sending 2 seperate sms's--even when the tracking info time tag shows id time frame i.e sms 1 19:00:16secs sms 2 19:00:16secs.
As i work for Vodafone i can track the sms traffic on our system but its the same situation with the orange network when i have my orange sim in the spv.
Just the way our networks work im afraid. As for the above poor chapy, its going to either be what we are discussing or issue issue with his device(which may be more probable orrrrrrr issue with o2)
never mind wish him all the best!

N2h, wa'alaykom assalam
Ohh i see! thats why its not happening here with me.
We have something called SMS Center, we just put this center's number in the SMS message settings.
Its nice to work in Vodafone... guess you have unlimited phone calls 8)
Lucky you :wink:

[REQ]Move incoming/outgoing SMS

Hi All,
I am using Indian version of HTC Touch Diamond (2G Version).
I want to filter SMS which are received or sent to particular contact to be moved to one folder. Does anybody have any idea about this?
I have tried SMSOrganizer trial but it crashed 2 times and i had missed my lots of sms, also it was not working fine.
Or simply can I configure like; SMS received from particular contact does not appear on manila 3d app??
Please advice me..
Thanks,
Krups

Nobody having any idea??

Disable "Thread SMS" and then try to use SMSOrganizer again.

I have already disabled SMS threading.. I have downloaded SMSOrganizer trial version.. but it crashes many times... any solution????

Any Alternatives??
Any light weight application to filter incoming SMS for HTC Diamond??

think you will struggle to do this with TF3D handlingling your texts
Therefore I suggest you switch off threaded sms, use TF3D config to remove text messaging from the TF3D interface
Then use the various sms tools - easyhelpers sms security used to work well on my Artemis
Because I like TF3D, I haven't used any such program on my diamond

SMS : delete/show number

Hi,
I have few problems with the gestion of SMS on my diamond. Maybe there is some registry trick to fix them ?
- if I delete a SMS from the SMS/MMS box it goes to the deleted sms folder which is normal and cool. If I delete a SMS from TF3D it is permanently deleted (doesn't go in the deleted folder). Is there an option to not have it permanently deleted ?
- if I have a contact with many mobile number (from different coutry in my case) it only show the contact name when I get a sms. I need to know the phone number used to write to me. Is it possible ?
Thanks,

nazbouh said:
Hi,
- if I have a contact with many mobile number (from different coutry in my case) it only show the contact name when I get a sms. I need to know the phone number used to write to me. Is it possible ?
Thanks,
Click to expand...
Click to collapse
I've the same problem, let me know if you found a solution

*bump*
Can't believe nobody found a fix for that

up
upupupupup

Can I add something to this?
I don't use TF though. My sms is shown in threaded view.
Now I would like to see when and what time the sms was received or send. I can only see what time a message was send/received when it was s/r on the same day. When that day is over you can only see on what day the sms was s/r.
Is there a way to view both day and time a sms is s/r?

nazbouh said:
- if I have a contact with many mobile number (from different coutry in my case) it only show the contact name when I get a sms. I need to know the phone number used to write to me. Is it possible ?
Click to expand...
Click to collapse
Hi,
any solution for this problem? It's very annoying!!!
Thanks

Can´t send SMS ??

Hi, I had my HTC DT2 for a week now, and in the weekend when i recived a sms and should answer the sms a box came up with "can´t send sms" Have tried switching on/off different things but can´t still send sms. I switch my sim card to a regular gsm phone and it worked perfect, so can some one help me !!

I think the problem is, that outlook saves the contacts with a + and a space between the prefix and the number.. e.g "+49 69123456". try to delete a contact and add this person again with your device and try again.

I have changed my numbers from +46707.....
to 0046707... and just 0707..... no success ! I can receive sms, but not send !!

I have not get my contacts from outlook, they where saved on my simcard and exported when i put it in my HTC TD2, and i can call the numbers, so just why sms? I have downloaded 2pch ring tones from a webpage, could there be some sort of virus ?? I have now deleted the 2 ring tones, but the issue remains.

You need a few settings in your phone to be able to send sms. I have a swedish device, and I guess yours is too? Anyway, I'm not sure what those settings are called in english, so I'll guide you in swedish too. =)
The first is the number to your "SMSC":
Settings - Phone - top thing... "service"? and then SMS
Inställningar - Telefon - Telefontjänster - Röstmeddelanden och SMS
Tele2 is my provider, so I'll have +46707990001 as my SMSC (SMS-servicecenter), check with your provider what number you should have there
Second setting is under advanced network(?)
Settings - Connections - Advanced... - SMS-service
Inställningar - (Mer) - Anslutningar - Avancerat nätverk - SMS-tjänst
I'm not sure if you need to change this, but try set it to only GSM.
Hope that'll work.

had the same problem, ensure that the mobile phone number you are try to message is saved under mobile number in the contact. If it is saved as work number or something else you will have problems sending sms's don't know why but that's how i solved my problem.

sms related

Hi. I have two questions about sms, I have a kasier and my brother a diamond, the first problem he has is about sms, that he can't send more than 1sms long, he can wright more caracters but only one can be send. He said he had no problem before.
The second one is a questions about a future that my kasier and many other models have, is that when u try to send a sms, at the number line all u have to do is punch a first later and a popup will show every name saved related to that letter. How come on diamond it is not, is it any solution so he can have that on his diamond. thanks in advance

Em Using diamond last 1 year.i don't have problem sending a msg bigger then 1.
yes in diamond u have to wright first letter of contect name and it will show a popup .

sms contact typing
I haven't had any problems sending more than one sms at a time. For the name to pop up i had to use Diamond Tweak to get them to pop up.

Thanks for the tip, but i surf around the diamond tweak v.0.5.3 the latest one thats what the phone has, and i could not find anything relatet to sms popup names. can u be more specific on how to enable. And pleeeeease some help if anybody know for the sms problem. I seen many other people having problems sending sms in other posts but no solution.