Database Develop

Phone left softkey!

Hi, i had just did a upgrade of my ROM to 1.93 and found out that the phone left softkey was now "video call" is there anyway to change it to contacts again.
cheers, thanks.

Use diamond tweaks found in the software section buddy

There's no known solution for this yet.

remap Hardkeys not working !

Hello, me again,
is there any possibility to use all the hardkeys on the diamond ?
In the settings, keys, there is only button 1 (hold) shown, nothing else.
I tried several hardreset up to now, i tried not to install touchflo i tried abbuttonplus. Every time the same, only ONE button is customizable !
Is this due to HTC branded the windows mob6 ?
THX,
chra

Try AE Button Plus

Hi Kareem,
as i wrote i already tried AEbuttonplus and i can see only the same one button its button 1 (hold). I think its locked by HTC. It is the O2 XDA ! Has anyone else the same problem? Is it possible that the only way is to flash another rom ?
THX
chra

Chra said:
Hi Kareem,
as i wrote i already tried AEbuttonplus and i can see only the same one button its button 1 (hold). I think its locked by HTC. It is the O2 XDA ! Has anyone else the same problem? Is it possible that the only way is to flash another rom ?
THX
chra
Click to expand...
Click to collapse
AE button plus doesn't changer the default mode of setting buttons.
It has its own settings dialog. It worked for me.
Read instructions!!!

Does HButton 2.3 also work ... anyone tried that?

Hallo again,
is this topic already solved ?
I cant understand that nobody has the same problem?
Is the fact that i cant use MY OWN BOUGHT buttons as i want it, to normal for anybody ?
Im confused,
THX
Chra

It is not solved for me.
All I want is for my HOME button to bring up the Start Menu. This was easy to do in the pocket pcs I used to own. Surely there must be a way to do this on the Diamond?

Raphael Caller ID for Kaiser

Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone

killerGBU said:
Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone
Click to expand...
Click to collapse
I think this might give you what you want. Not sure if it will intall over that you have now. I used it once , but I prefer the slide to answer. It keep me from accently hitting the hang up button when holding the phone to my face or answer while phone is in it's case, or me grabbing it, before I can see who's calling.
Try this, hope it's what you're after:

thx,
i helped, bud i dont see color and mute button. It doesnt matter, i´m glad that hw keys is now working.

Sorry, I don't remember the exact detail of the dailer.
Keep an eye on it. On my ROM this (maybe, don't recall specificaly) and the opal dailer start out working but soon after break.
Hope you find what you looking for.

I've tried installing this cab on my HTC 6.1 ROM, but it only changes the startup pin screen and nothing else. Any other versions that will work on a standard ROM to get the call id screen like above?

Problem upgrading blueangel to wm6: no vibration incoming call

Hi to everyone!
I upgrated my blueangel from wm2003 to wm6 ( 6.1 ROM MiChy ITA 1.21 ).
Everything works fine but.. my pda doesn't vibrate in my incoming call & sms alert or notification.
How can I fix my problem? Something bad in the reg?
Does everybody experienced my problem?
Thanks
p.s. My radio version is 1.12 ...should I upgrade to 1.15 ?

It doesn't vibrate at all? If you already tried setting SMS and call alert to vibrate and it does not vibrate then it must be a hardware failure. Try to install phone_pad_vibrate then SR your BA and go to phone and press some numbers and if it still didn't vibrate then it's a hardware issue.

You can find that cab here!!!!!!!!!
Jejeje yes men but on some devices the phone pad wont works... reupgrade your rom man!
if you wanna try that test... check that cab and download it from my downloads link at my siggy.

just don't download +Que's porn collection on his siggy...hehehe

Shhhhhhh!!!
dont scream it loud man!
I dont want a mod over me asking for more pics or videos... jajajaja.
Oh yes... if you download some.. share more than that.

I also have the problem were it doesn't vibrate. If I go to ringtone settings, select vibrate, then press play, it vibrates, but whenever a call or sms comes in it doesn't vibrate at all.

missing information
cmstackar said:
I also have the problem were it doesn't vibrate. If I go to ringtone settings, select vibrate, then press play, it vibrates, but whenever a call or sms comes in it doesn't vibrate at all.
Click to expand...
Click to collapse
could you give me the basic information of your device. i need to know about the radio version, which rom you are using...
without those basic things, the chances of receiving help here are rather slim.

Thanks guys!!
I fixed the problem simply upgrading my radio to 1.15 and installing:
> MMS_enable program
> ARCSOFT MMS Composer 4.2.8.1
maybe these sw enabled some windows mobile keys...
I hope my solution will be helpfull for anyone who experienced this bug.
bye ))

Vibrate to Connect in 6.5

is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom

Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.

TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.

GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.

AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..

neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.

that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?

Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal

beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you

didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?

The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset

I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.

Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks

i have the same problem and i would like to know how to fix it ..
thanks all

-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee

The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_

hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.