Wi-Fi problem - Tilt, TyTN II, MDA Vario III General

I have a brand new tilt that I got last night and I am unable to connect to my wireless network. When I enable wi-fi in my Wireless Manager, it prompts me to connect to my router or to my PS3. I choose my router, set it to connect to 'Work' (used to do this on WM2003/WM5) and enter my WEP key.
After the WEP key is entered, I see that it is connecting, but then it just goes back to the network being available.
I have tried changing the wireless power to high, deleted the settings and re-entered them. Rebooted the phone with a hard reset, as well as my router, and I am still unable to connect.
Any thoughts?

what about setting it to connect to "The Internet" instead of Work? that's how i have mine and it works flawlessly...

I get the same results. In 'Start' > 'Settings' > 'Connections' > 'Wi-Fi' I see the network I want to connect to. I highlight it and click 'Connect' and it says 'Connecting' for a few moments. Instead of moving to 'Connected' it just goes back to saying 'Available'.
I have tried every combination of 'Work' or 'The Internet' that I can find, and still no luck. I tried connecting to a neighbor's unsecured wireless network and got the same results, so I know it's not the WEP. On a side note, my Dell Axim X50 with WM5 connects to both networks just fine.

this happens to my phone every so often but a soft-reset or cycling the WiFi in the comm manageer usually fixes it...

Unfortunately, that hasn't worked for me. I have done soft resets, hard resets, and still it doesn't want to work. I'm going to try at my office tomorrow when I get there and see if that makes a difference, but I don't have high hopes at the moment.
I've read that some routers might be problematic, so I am wondering if anyone has tried the Linksys WRT100N with their Tilt. If so, was there anything special that was done to get it working?

same exact problem with my wi-fi... except the 1st day i got my tilt, the wi-fi was working flawless while hooked up through usb to my laptop.. now its not working at all. It just tries to connect and nothing happened. I may even have the same exact router lol. Its an old linksys

I think it's the Wireless-N router at home. I am at work on a WAP54G and it's working fine. PIE launches, I can see my network and Pocket Putty hits the servers I need it to. Unfortunately, that means I get to mess with the router at home, but fortunately it means there is nothing wrong with the tilt.

Related

Having trouble connecting to wireless

Hi,
I've got an Alpine and all the ROMs are simple out-of-the-box as from O2 back in september.
Previously, I would use it to connect to the wireless network in my university. I would turn on the wifi then select the network to connect me to the internet and then enter the wireless key we have been provided with.
However, now it just stays on 'scanning network' and doesn't prompt me to choose a network or enter any key. Sometimes it claims that an IP has been assigned, but it doesn't progress past this. I have tried soft resetting and changing the wifi from 'best battery' to 'best performance'. I have also tried being really near the router.
My friends can access this network just fine on their laptops, and when I run WiFiFoFum it shows up just fine. I am pretty certain the router is a 802.11g one, and I can't tell if it's been changed since I could access it before.
My problem is I know virtually nothing about WiFi, so I don't know how to troubleshoot this. I was hoping someone could give me a bit of help?
Thanks.
try this.
turn wifi on
go to settings
connections
network cards
see if you have networks listed, if u do delete them.
turn off wifi and turn back on again so it searches. see if it picks up the network.
Failing that what IP is it showing u, if its assigned one??

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

xperia wifi problems

i have a linksys WRT54GX4. When I try to connect to it using the xperia, it tries to connect for a few seconds and then the status shows unavailalbe then a couple seconds later the status of the router goes back to available but i can never connect to it. The router is running a DHCP server and the wireless security is WEP 128bit and the authentication is open. I don't know why it doesn't want to connect. I really need to sort this out. Anyone else experience this problem? The phone connects to other routers in my neighborhood though, so it might be the router, but i have other devices connected to the router and they are just fine.
Haven't used that router before but maybe you could try updating the routers firmware to the lastest available.
These should be available from the manufacturers website.
already tried its the latest.th erouter isn't giving me any problems on my othe computers/ laptops. Is it possible that the x1 just isn't compatible with it?
Do you have any other security, i.e. MAC filtering, turned on?
no i never mess with the more advanced settings. BTW I even tried disabling all encryption basically unprotected, and it still gave the same problems! Thanks for the quick replies also.
Hmmmm......
Ok, I know its a pain but try changing your security from WEP to WPA.
Everyone with wireless should really use WPA or above, WEP is quite crackable with various free tools floating around the net.
yea but shouldn't it have connected with NO encryption whatsoever?
Hpoefully a hard reset will fix your problem?
I had the same problem but i thougt it was becuse ny router but i tried to connect to other networks aswell an got the same problem, well later on my phone stopped accepting files thrue the usb cable. and didt want to install some cab files that i had istalled before and knew was working.
I had enough and decided to hard reset it and it really fixed all my problems.
so hopyfully it will for you too..
Good luck.
yea i'm gonna try now, hopefull that will work, did u hard reset thorugh the iption in settings, or did you do it physiclaly through buttons>?
Havent had that problems ... what i do is allow only my devices mac address to connect ...
my psp as well as gf psp
2 desktop + laptop
htc touch cruise
xperia
and home media player
Everything else gets denied, cant really beat mac address filtering.
ok just tried a hard reset and still didn't work. The signal strength is full but the phone never even gives me that automatic message that there is a network available, but it does this for other routers in my neighborhood.
BuddyLee said:
Havent had that problems ... what i do is allow only my devices mac address to connect ...
my psp as well as gf psp
2 desktop + laptop
htc touch cruise
xperia
and home media player
Everything else gets denied, cant really beat mac address filtering.
Click to expand...
Click to collapse
Actually, you can, but that's for another forum
OK PROBLEM SOLVED. Did a factory reset on my router, then the phone connected. But when I went to change the channel from auto to 10, the wifi stopped connecting. After that, any susequent changes to the channel; whether I tried a different channel or set it back to auto, did not work and the only way to get it back was factory reset the router. So basically I have resseted my router, and have not touched the channel settings and it is working fine. BTW the dedicated Xperia tech support line is AWESOME, even though they weren't the ones who figured out why i had the problem (and they wouldn't have because it was the routers problem) they knew what they were talking about and are actually from the US!
n4v1n, did WiFi work for you in other networks (with other routers)?
I have the same problem with my phone: only reset of my house router allows the phone to reconnect.
I am not so convinced that it's a problem of the router, because two of Samsung phones (Omnia HD on Symbian and Wave on Bada) connect always without any problem.
does your router have a physical easy connect button? try to use that before connecting even you already have the proper setup on both devices. sometimes somehow that happend to laptop, phone, wifi card. and with a single push solved most of the quirks.
if i remembered correctly, older wifi support only up to 7-1 devices. and my phone seems never connect to anything higher than channel 6.

Xperia X1 WIFI problem!

Hi there, i've been trying to get wifi to work on my x1 all day. really annoying!
I've got a netgear wgr614 as a wireless router. The x1 finds the wireless network. but when i put in the RIGHT wep key, x1 simply goes from available to connecting, and shortly after to available again! neither ie nor opera works.
Then i deliberately tried a WRONG wep key, no popup saying it's a wrong key.
so then i switched off wep, leaving wireless network unprotected. I tried to connect again, futile! goes from available to connecting to available again! I tried options such as Internet, Work, using PEAP option and what not. Simply won't connect to my network! strangely enough, i plugged it to pc with usb cable and it loads webpage, finally. But i really need wifi! Any thoughts? Many thanks in advance! this is driving me crazy. should've got an iphone
Forgot to add, I use the generic UK R3A rom.
anyone will contribute some input? greatly appreaciated!
have you tried to change from wep to wpa and restart the procedure?
When I 1st got my X1 I had the same WiFi connection problems.
A soft reset of both devices (phone & router) mysteriously fixed it. It's been fine ever since.

Help: WIFI not connecting at all: solved

Specifically, my D-Link Wireless N 150 Router
I was able to get by the opening screen by connecting with my neighbor's open wifi.
With my own, I input the correct password, and it showed "Connecting" for 3 seconds, then just ignores it and says "Saved"
This is frustrating, as my laptop and HTC Desire S works perfectly fine. What can I do? I even reset the router to have no password, and it still doesn't work. It stops trying to connect and just says "Saved"
sigh.. nothing I try works.
So now my laptop is connected to my WIFI
my phone is connect to internet via USB to my laptop
and my Nexus 7 is connected to the hotspot created by my phone -_____-
The only WIFI it won't connect to is my own. This is ridiculous
What security settings are you using, encoding on your access point.
I tested a lot of access points at the house and have not had issues with any of them.
http://forum.xda-developers.com/showthread.php?t=1803391
Also, have you just simply rebooted your router. Since it connects to others without issue.
Even though your laptop connects, it already had that connection. And the router may not want to give out another address via dhcp.. Just try unplugging router, and plugging it back in and then reconnect. Stupid as it sounds.
thunder9111 said:
Specifically, my D-Link Wireless N 150 Router
I was able to get by the opening screen by connecting with my neighbor's open wifi.
With my own, I input the correct password, and it showed "Connecting" for 3 seconds, then just ignores it and says "Saved"
This is frustrating, as my laptop and HTC Desire S works perfectly fine. What can I do? I even reset the router to have no password, and it still doesn't work. It stops trying to connect and just says "Saved"
Click to expand...
Click to collapse
I had a similar issue, mine would tether to my phone but not connect to my home wifi. It would show as "connecting" then would say "saved". I hit the reset button on my router and it connected with no problem after that, might want to give that a shot and see if it works. The rest button on my router was on the back and needed a paperclip to push it.
Try WPS if you have it.
Ok, disregard this thread, I'm a fool :silly:
Even after disabling the password I still couldn't connect. While I was showering just now, I remembered why:
2 months ago my neighbors were stealing my WIFI.. so i specifically only allowed the IP of my laptop and phone.
No wonder why it could not connect at all even without password
Sorry for the new thread guys. Just got my Nexus 7 for a few hours, and it's perfect. The left side of the screen is raised a little, but I can ignore it just fine. The screen has no dead pixels and I'm happy with it.
Thanks all!
Good to know it was something simple. Might want to change the OP subject to Solved.

Categories

Resources