Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.
Related
Hi all, I have a weird problem.
I have a tilt and am using the HTC rom, I connect to wifi in my apartment and 3G or HSDPA when I leave the apartment.
When I'm connected through wifi, my Slingplayer works flawlessly, finds my slingbox, and plays the video. When I try to connect outside using 3G/HSDPA, I get "Cannot connect with current connection settings"
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem, and I know that the 3G works fine on my tilt because I have no problem loading websites, using mundi, etc.
Any ideas? I've seen a couple other posts on other forums with the same problem but there were no responses on them.
Thanks!
Can you connect to anything else when on 3G?
Try your proxy settings
Did you change the default ports on the SlingBox config?
Are those ports (default or modified) open from the outside of your firewall/router?
If you have the ability to monitor inbound connections try monitoring while you connect through 3G and see if your device attempts on the correct port and that it is NATed to the correct IP and port.
Raptor
I had exactly the same problem with my Belkin router. You need to set up a port on your router in order for it to work. I know on mine it involved setting up a virtual server.
I am using the TyTN II and I am having the same exact problems. I think AT&T killed access to slingbox somehow. I can surf the internet just fine, and then as soon as I start the slingplayer, my connection gets lost and my phone says "cannot sonnect with current connection settings." Any help would be appreciated, especially with the World Series coming up this week.
cjf2014 said:
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem
Click to expand...
Click to collapse
Possibly a silly point but can you definitely connect over the internet to it? Or just over your LAN?
There's a wizard that enables the port forwarding for you - (called Remote Viewing or something?) should be with the software for the slingbox.
Could be that your desktop is just going direct over the LAN?
Also, I had problems when I was just using the automatic settings to configure the box - in the end it works far better if you ignore the UPnP stuff, and use the manual setup process (or so I found). Again, the desktop software wizard steps you through this.
If you can connect over wifi at home, but not over wifi or 3g when away, then unless AT&T are blocking the ports, its more likely your router settings, as at home you are inside your LAN but elsewhere you have to go through your routers hardware firewall.
Just have a look at slingbox's help files.
SlingBox works fine on AT&T. Check your proxy settings on the phone. Try the "remove hidden proxy" cab. The home router also needs an outgoing port defined as well. Good Luck, I know it can work.
I will bet that it's your router/firewall blocking the incoming net traffic. Try connecting to it from a Friend's internet connection or a public computer at the library or something.
Had a similar problem with slingplayer mobile on my new HTC TouchPro- phone from Vodafone but I put in my T-mobile SIM as I wanted to keep the Web and walk.
Slingplayer worked fine from Vario3 with same sim but not from TouchPro. Eventually unticked the use proxy server in the connection settings and it started to work. Weird, as on the Vario the proxy box is ticked and it works.
Anyway, worth trying if anyone else is having problems.
One of two things, either you have not port fowarded your router to allow the Slingbox to be remotly viewed, go to portfoward.com for exact instructions for your specific router, or your hidden proxy is messing with it. More than likley its not port fowarded correctly. BTW...when your in your home network, i.e... using WiFi, it will work without the router being fwded because your slingbox is already inside your home network. When coming from the outside of your home network through 3g or whatever your router has to allow access to the slingbox.
Hi:
I have the HTC-branded TyTN II and I can connect to my Wifi network just fine, but none of the applications can access the Internet through this connection. The connection status shows as "connected" and the phone shows up in router's DHCP table. Does anyone have a solution?
Thanks in advance!
Try moving the WIFI power saving mode to the left: "Best Performance".
Don't know if this is "too obvious" but have you set the DNS lookup address?
oh man! another unlucky soul...like me
dont worry buddy, you are not alone in this "wireless problem" as i have an HTC Touch and unfortunately i have Windows Vista Home Premium installed in my laptop which has damn wifi.
same as yours, my HTC connects to the wifi i made in several ways with Security and Authentication Enabled in every way i can and also last with Open Authentication and Security as NONE
my network shows that my wifi is connected to my HTC but only LOCAL, which means you cant access internet, and strangely also, the wifi network is labelled as Unidentified Network, when the WIFI i made is given a solid name, like WIFY.
i checked out my HTC Touch with a friend who has Windows XP installed in his laptop and damn....i can browse as well as chat in Messenger, while being connected to his WIFI.
So i will tell you these by experience:
1st: its not a problem with your HTC TyTN II, so dont subject it to forced connection, like messing with your settings all day long while you try to connect it. cos simple truth is you cant (i m assuming you have windows vista as well)
2nd: its been like my third nite, with "vista+wireless connection+unidentified network" searched on google.
and somethings i came across, but didnt fix my problem includes:
> disable IPv6 from your NIC
> assign a MAC address filter to your NIC (Vista by default has Network Address set to Not Present, which can be found in your LAN Card > Properties > Advanced Tab)
And even my assumption that you're using Vista is wrong, let this be an INFO to other users here as well.
Damn, i m getting back to Windows XP!!!!!!!
So if you think your WiFi card needs a checkup or try these solutions i have mentioned, try google....its a saviour for all gadget dudes like us!!!!
Just to try and give a fuller picture - I have no such problems
I have a desktop running Win XP Pro, a laptop running Vista Home Premium and my Kaiser. All are connecting wirelessly thru a router using WPA encryption and using IE, Firefox for browsing, SMTP/POP3 clients for email and MSN. They are also connection to each other - desktop, laptop and Kaiser - no problem on any of them.
Yeah, having Vista on your network should be no issue with regards to connectivity of a device to a wi-fi network. However, having Vista on the network may make the vista computer invisible on the network map and make it unavailable on the network if you are using XP based computers as well. Not too sure about other Windows versions or different OSs. This is because the Link-Layer Topology Discovery (LLTD) Responder component is not installed on the Windows XP-based computer. The patch to install on the XP based rigs is here. I ran into several networks with this issue and have cleaned them up with this patch. I even keep it on my Cruzer because I have seen it so much.
I know this doesn't help with the original query, but I wanted to ensure ayyum3 and cv2k3 know that Vista in the network will not affect any outside device's connectivity.
To the 2 fellas who are having this issue... are you using a software, or have you enabled the locking out external devices from connecting to your network? Also, have you ensured your wireless router has proper internet connection? To see the network yet be unable to access the internet leads me to believe it is a router-modem connectivity issue (albeit a simple IP addy issue, or a cable issue).
What kind of wireless router you using? Is it using the latest firmware for it?
Are you able to connect other wireless devices to the said router?
Are you able to connect your TyTN to some other AP (ie neighbours, cafe, starbucks, etc)?
did you try setting your wifi power mode to best performance
This was happening to me recently after I replaced my router...I ended up changing the channel the wlan was using from Auto (it was setting itself at channel 6) to channel 11. Channel 1 also worked. The other thing I did was disable the wireless speed enhancement features on the router. Now I can connect and surf with no issues...
I dont know what all that was about a vista pc but the OP's problem (from last november) would no doubt be that he had not set the wifi connection to connect to "the internet" or his device was set to use a network proxy for all connections.
Hello fellow diamond users!
First off I'm not new to XDA's and WM6, I've had two XDAs before and have always browsed these forums for advise, although I've not been an active poster.
But now I'm stumped. I just cannot get my O2 Ignito to connect to any secured wireless network (unsecured is fine!)
I've even just done a hard reset just to be sure.
The phone can see the network, I'm trying to connect to a mixed mode (11b & 11g) wireless WPA/PSK (WPA+WPA2) but the phone simply refuses to connect! I've even double checked the settings on my old Wizard to be sure (which still connects fine!) and reset the key and checked this with an iPhone which connects fine.
Does anyone have any suggestions?
I m not sure it can help u in this case, but give it try...
Go to Wireless LAN >> Power mode,
and change from Best Battery to Best Performance and try,
I had this problem once and I found that some routers don't know to support Power save mode
Tried that already still no joy.
This is really doing my head in now!
I think its router specific, as I've just connected to the wireless connection of the company downstairs...with there permission of course!
is DHCP or mac address filtering enabled?
Hi there!
I've the same problem. I've an "old" TYTN II working fine and a Diamond which doesn't support wpa-psk secured network. No MAC filtering, no DHCP, no nothing! Just doesn't connect. Sometimes it gets connected (after restart or when coming from sleep mode) but then i turn off wi-fi, turn on again, it founds the net but simply doesn't connect.
Does anybody has an idea?
THXS!
Hi guys!
I have a Touch Diamond 2. It's great and certainly an upgrade from my Touch Cruise!
I have a strange problem though. Whenever I try to connect through 3G (T-Mobile Netherlands), immediatly after it makes the connection, it gives the dialog 'cannot connect etc'. 3G is truly connected but no data is coming in.
Now I have found where the problem lies, sort of. 3G works fine when I don't configure my home Wifi connection. Whenever I configure that, 3G stops working. It doesn't matter if Wifi is turned on or off. 3G does have a dynamic ip, where my Wifi connection requires a static IP. But I make all these settings in the Wifi part of the configuration screen, the IP details are under the 802.11 b/g network card.
This used to work flawlessy on my Cruise. Anyone have a solution? Thanks!
good morning. as you are with tmobile i'd suggest you are having the same problems as me with tmobile uk. for some reason tmobile sets up a proxy server in your 3g data connection setup, this caused huge problems for me but clearing it solved them all.
try this first and see how you go.
Possible, but where exactly do I change the proxy settings of the 3G connection?
BeQuietAndDrive said:
Possible, but where exactly do I change the proxy settings of the 3G connection?
Click to expand...
Click to collapse
Hey that's a coincidence, just read the same question at GoT
I have similar problems.
Now and than my HSDPA connection works good, but at some moment I just can't reach any website.
Disconnecting and reconnecting to HSDPA sometimes helps, and sometimes I just have to wait a few minutes and than it works again.
I also tried another DNS (OpenDNS) but it doesn't solve the problem,
Proxy settings can be found at (I assume your dutch):
Instellingen> Meer> Verbindingen> Verbindingen> Mijn proxyserver instellen
At my TD2 is no proxy set, so thats not the cause.
Hope sombody else can help!
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
I had exactly the same problem with my D2. I also had it on my Cruise with the later ROMs. The official HTC 6.1 ROM did not have this problem.
I experience it when I set up my wifi 802.11b/g network card in the phone to have a static IP address and set the default gateway. If I use DHCP there is no problem.
Setting the wifi card up on the phone DEFINITELY screws up the cellular data connection.
BeQuietAndDrive said:
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
Click to expand...
Click to collapse
I use a dynamic IP, for me it doesn't work.
With my dear old Wizard (MDA Vario) I had no problem at all with the same settings!
yup thought i was the only one with this problem need a fix for it soon man otherwise we are gettin bumped for not havin the settings coz we on t-mobile
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
for me i find that the web sites work but any app that requires to go online ie facebook, msn, sky fire etc jus dont work wen you try to connect online......... stupid t-mobile
My connection problems are gone.
Maybe I (we) encountered hickups with the T-Mobile proxy-server....
maybe You can help me.
I have a MDA V (germany T-Mobile) and i can not connect to my AP here at Home.
I have a ASUS WL500g configured as AP behind my Firewall/Router. All other device in my house, a Laptop, a Netbook and a 'WII' working fine!
All get the IP from the Router, the AP works transparent.
D2 will not connect. The Mac-Address from the D2 is configured in the AP, and i can see the router statuspage and see the MAC of the D2 sometimes in the list. But only as "associated" and never as "associated authorized" as the Laptop here in example:
-------------------------------------------------
Stations List:
-------------
00:23:76:yy:xx:xx associated <-D2
00:1C:BF:yy:xx:xx associated authorized <- Laptop
--------------------------------------------------
I configured a lot in the settings, but i cant get the D2 online with wifi.
Can someone plz help a bit?
-
other question: if i manage the problem some day, is it possible to configure the Networksettings of the D2 device in the way that the device only use USB and te WiFI-Connection to access the internet? I hat it that the device use mobile-internet connection without asking me to do so.
Same problem
BeQuietAndDrive said:
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
Click to expand...
Click to collapse
I was experiencing the same problem, only with the difference that I am using 3 different Wi-Fi adapter settings every day (for 3 different networks - two with fixed IP and one with DHCP enabled. Most elegant solution that I came up with was a small, but very handy application called "WiFi Profiles". Settings for WiFi adapter are easily changed by choosing a profile that you want to use and applying it. Before you disconnect from WiFi network, you just set adapter to DHCP, and after that your GPRS/3G/HSDPA connection works like a charm. By the way, I am proud owner of Touch HD but I am using Dutty`s Topaz based rom V3.4 XTREME SHIP.
Hello,
I am new to Xperia X1, just for 2 days. I am trying set up internet connection over WIFI, but no success after several hours of configuration.
- I have original rom, no extra apps installed yet
- I made factory reset on my airlive router and made only necessary setup checking then with notebook(win os) which connect to inet properly everytime..
- I can connect to AP from X1
- I can see IP served by DHCP in X1
BUT I cannot open and display any internet webpage in explorer nor running i.e. google maps preinstalled application which need internet connection. In explorer I can see messages as "connecting", "retrieving" and then "page not found" .. (in czech language) I tried in X1 explorer open only "IP" webpage but no success (if DNS in X1 fail). I tried WPA and non secure connection with AP, X1 connect fine, does not matter wireless type connection, but internet does not work.. I also tried setup IP GW DNS etc manually and it did not help..
Internet over GPRS is fine.
I have already no more ideas how make alive this basic and most important function in X1. You know, I expect tap "next", "next" and "done"
Could you help me or give some tip(s)?
Thanks a lot !
settings->connections->connections->advanced->select network
in the dropdownbox's pick
my homenetwork or what ever the non isp connection is named on your setup
and thats pretty much it
if you want to use gprs again change it back
I removed SIM card and switched off phone module avoid internet over gprs and I spent some time with your tip, but it does not work for me :-( I think I already tried all combinations, ipconfig on x1 would probably help..
sounds like it's an issue with your wifi router then
I would try another router somewhere
and update the router firmware they release fixed firmware for routers once in awhile
also just turning off the router for 10sec and turning it back on
that does the trick for me when my hdcp function in my router gets confused
and refuse to let my x1 and ipod connect
of cause I have the latests firmware in the router
next progress: I had coffee in restaurant with free wifi hotspot and I was able connect to internet on 1st try.. No extra configuration on X1 was needed..
so there must be problem at my home with:
1) Access point Airlive wl-5460
2) ADSL Router cellpipe from lucent
As I mentoined I made factory reset on accesspoint and several times disconnect it from electricity which did not help. I will try connect my AP to some friend's network outside home. I believe this is step how I could find device which do not like my new X1. btw I guess it will be adsl router..
wish me luck..
solved: wl5460 upgrade e8 -> e17
and it work great!