SlingPlayer problems? - Tilt, TyTN II, MDA Vario III General

Hi all, I have a weird problem.
I have a tilt and am using the HTC rom, I connect to wifi in my apartment and 3G or HSDPA when I leave the apartment.
When I'm connected through wifi, my Slingplayer works flawlessly, finds my slingbox, and plays the video. When I try to connect outside using 3G/HSDPA, I get "Cannot connect with current connection settings"
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem, and I know that the 3G works fine on my tilt because I have no problem loading websites, using mundi, etc.
Any ideas? I've seen a couple other posts on other forums with the same problem but there were no responses on them.
Thanks!

Can you connect to anything else when on 3G?
Try your proxy settings
Did you change the default ports on the SlingBox config?
Are those ports (default or modified) open from the outside of your firewall/router?
If you have the ability to monitor inbound connections try monitoring while you connect through 3G and see if your device attempts on the correct port and that it is NATed to the correct IP and port.
Raptor

I had exactly the same problem with my Belkin router. You need to set up a port on your router in order for it to work. I know on mine it involved setting up a virtual server.

I am using the TyTN II and I am having the same exact problems. I think AT&T killed access to slingbox somehow. I can surf the internet just fine, and then as soon as I start the slingplayer, my connection gets lost and my phone says "cannot sonnect with current connection settings." Any help would be appreciated, especially with the World Series coming up this week.

cjf2014 said:
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem
Click to expand...
Click to collapse
Possibly a silly point but can you definitely connect over the internet to it? Or just over your LAN?
There's a wizard that enables the port forwarding for you - (called Remote Viewing or something?) should be with the software for the slingbox.
Could be that your desktop is just going direct over the LAN?
Also, I had problems when I was just using the automatic settings to configure the box - in the end it works far better if you ignore the UPnP stuff, and use the manual setup process (or so I found). Again, the desktop software wizard steps you through this.

If you can connect over wifi at home, but not over wifi or 3g when away, then unless AT&T are blocking the ports, its more likely your router settings, as at home you are inside your LAN but elsewhere you have to go through your routers hardware firewall.
Just have a look at slingbox's help files.

SlingBox works fine on AT&T. Check your proxy settings on the phone. Try the "remove hidden proxy" cab. The home router also needs an outgoing port defined as well. Good Luck, I know it can work.

I will bet that it's your router/firewall blocking the incoming net traffic. Try connecting to it from a Friend's internet connection or a public computer at the library or something.

Had a similar problem with slingplayer mobile on my new HTC TouchPro- phone from Vodafone but I put in my T-mobile SIM as I wanted to keep the Web and walk.
Slingplayer worked fine from Vario3 with same sim but not from TouchPro. Eventually unticked the use proxy server in the connection settings and it started to work. Weird, as on the Vario the proxy box is ticked and it works.
Anyway, worth trying if anyone else is having problems.

One of two things, either you have not port fowarded your router to allow the Slingbox to be remotly viewed, go to portfoward.com for exact instructions for your specific router, or your hidden proxy is messing with it. More than likley its not port fowarded correctly. BTW...when your in your home network, i.e... using WiFi, it will work without the router being fwded because your slingbox is already inside your home network. When coming from the outside of your home network through 3g or whatever your router has to allow access to the slingbox.

Related

Connected to Wifi but cannot use Internet

Hi:
I have the HTC-branded TyTN II and I can connect to my Wifi network just fine, but none of the applications can access the Internet through this connection. The connection status shows as "connected" and the phone shows up in router's DHCP table. Does anyone have a solution?
Thanks in advance!
Try moving the WIFI power saving mode to the left: "Best Performance".
Don't know if this is "too obvious" but have you set the DNS lookup address?
oh man! another unlucky soul...like me
dont worry buddy, you are not alone in this "wireless problem" as i have an HTC Touch and unfortunately i have Windows Vista Home Premium installed in my laptop which has damn wifi.
same as yours, my HTC connects to the wifi i made in several ways with Security and Authentication Enabled in every way i can and also last with Open Authentication and Security as NONE
my network shows that my wifi is connected to my HTC but only LOCAL, which means you cant access internet, and strangely also, the wifi network is labelled as Unidentified Network, when the WIFI i made is given a solid name, like WIFY.
i checked out my HTC Touch with a friend who has Windows XP installed in his laptop and damn....i can browse as well as chat in Messenger, while being connected to his WIFI.
So i will tell you these by experience:
1st: its not a problem with your HTC TyTN II, so dont subject it to forced connection, like messing with your settings all day long while you try to connect it. cos simple truth is you cant (i m assuming you have windows vista as well)
2nd: its been like my third nite, with "vista+wireless connection+unidentified network" searched on google.
and somethings i came across, but didnt fix my problem includes:
> disable IPv6 from your NIC
> assign a MAC address filter to your NIC (Vista by default has Network Address set to Not Present, which can be found in your LAN Card > Properties > Advanced Tab)
And even my assumption that you're using Vista is wrong, let this be an INFO to other users here as well.
Damn, i m getting back to Windows XP!!!!!!!
So if you think your WiFi card needs a checkup or try these solutions i have mentioned, try google....its a saviour for all gadget dudes like us!!!!
Just to try and give a fuller picture - I have no such problems
I have a desktop running Win XP Pro, a laptop running Vista Home Premium and my Kaiser. All are connecting wirelessly thru a router using WPA encryption and using IE, Firefox for browsing, SMTP/POP3 clients for email and MSN. They are also connection to each other - desktop, laptop and Kaiser - no problem on any of them.
Yeah, having Vista on your network should be no issue with regards to connectivity of a device to a wi-fi network. However, having Vista on the network may make the vista computer invisible on the network map and make it unavailable on the network if you are using XP based computers as well. Not too sure about other Windows versions or different OSs. This is because the Link-Layer Topology Discovery (LLTD) Responder component is not installed on the Windows XP-based computer. The patch to install on the XP based rigs is here. I ran into several networks with this issue and have cleaned them up with this patch. I even keep it on my Cruzer because I have seen it so much.
I know this doesn't help with the original query, but I wanted to ensure ayyum3 and cv2k3 know that Vista in the network will not affect any outside device's connectivity.
To the 2 fellas who are having this issue... are you using a software, or have you enabled the locking out external devices from connecting to your network? Also, have you ensured your wireless router has proper internet connection? To see the network yet be unable to access the internet leads me to believe it is a router-modem connectivity issue (albeit a simple IP addy issue, or a cable issue).
What kind of wireless router you using? Is it using the latest firmware for it?
Are you able to connect other wireless devices to the said router?
Are you able to connect your TyTN to some other AP (ie neighbours, cafe, starbucks, etc)?
did you try setting your wifi power mode to best performance
This was happening to me recently after I replaced my router...I ended up changing the channel the wlan was using from Auto (it was setting itself at channel 6) to channel 11. Channel 1 also worked. The other thing I did was disable the wireless speed enhancement features on the router. Now I can connect and surf with no issues...
I dont know what all that was about a vista pc but the OP's problem (from last november) would no doubt be that he had not set the wifi connection to connect to "the internet" or his device was set to use a network proxy for all connections.

WM6 internet sharing with whole network

Hi, I have a Tilt and do not have a problem tethering to a single computer. What I would like to do is share with all four computers in my home. I have tried bridging the sharing connection to my lan connection and have gotten dhcp on the Tilt to assign addresses to all computers on the network, but they still can't ping each other (other than the tilt and the computer its directly tethered to. I have turned off all firewalls and still nothing. Rebooted everything. Still nothing. Is it possible to do this? Thanks for any help.
There's a program around here somewhere that allows you to make your TILT a wireless router. If you do this, any machine with wi-fi can connect to the SSID and go.
Anyone have the link handy?
Wireless Router
Could I have it connect with my current wireless router to provide internet to my wired network through the rj45 ports on the router ? 3 of the 4 computers are on a wired lan. You see, we just got HSDPA on Monday and I love it. I got a bit ahead of myself and cancelled my home DSL connection. Now I'm realizing that I am stuck with only having one computer on the internet at a time. This has got to be possible. - I just found the thread on setting up as a wireless router. I will start playing with it. Any suggestions/instructions are appreciated.
OK, get connected to your carrier whilst tethered.
Then from any Explorer window on your tethered PC, select, 'Set up a home or small Office Network'.
Select the first option in the following box 'This computer directly connects...' and follow it through.
This should set up your Activesync PC as an IP address of 192.168.1.1. (an access point IP)
If you connect any other PC/laptop to this PC via wireless or LAN (you do know how to do that I hope??) to this computer, it will share the internet connection..
Remember, this will change any prior Internet configuration you have on the PC/Laptop!
Hope this helps.
Internet sharing
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?
jebrown1 said:
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?
Click to expand...
Click to collapse
NO, 192.168.0.1 or 2.1 or.3.1 are all access point AD's.
You have to go into your PC/laptop Network Places icon to tel IT to then share the connection.
I am sorry, but if you have never shared an internet connection on your PC before (ie via modem or ADSL), you will not really understand how it is done.
Access points
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...
jebrown1 said:
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...
Click to expand...
Click to collapse
OK, set all computers on the network to fixed IP's of 192.168.0.xxx in Internet protocol (under TCPIP on network)with the same subnet mask with a default gateway matching your device! Try that...
sharing
That was my first attempt at a work around. The problem is that there are
actually two network connections to the pc. One for the Tilt (usb) and one for the LAN (nic card). They don't seem to see each other even when they have matching ip addresses and subnets. Thats why I tried right clicking them and selecting "bridge these connections." It seems that internet sharing "requires" DHCP to be used. I tried setting all the computers to use DHCP and actually had the Tilt assigning ip addresses to all of the computers on the network by bridging the two connections and using dhcp. Oddly, though, the computers on the network could not ping the Tilt. I think its because bridging uses the data link layer of the osi networking model?
There must be a hack to change the ip address that windows uses for the sharing access point. Alternatively, it would be nice if there were a device out there that could act as a hub to network usb and 100baseT devices together. In other words, plugging usb and cat5 cable rj45 plugs into the same box and having them all be on the same network.
OK, I have asked smitty to get on this but both of us are WAYYYYy past our bedtimes.
He should get back to you tomoz on this. (he's the Network buff..)
Hope it works out..
this is the app mentioned earlier and may help your solution...
http://forum.xda-developers.com/showthread.php?t=341398
I can't make this work. I don't have WiFi on all of my computers. I was hoping to use WMWifiRouter to connect to my wireless router and then to my whole wired network. Is there a way to make the Tilt wireless router to connect with another wireless router? I'm thinking what I will do is go back to an AT&T rom and use "wireles modem" instead of "internet sharing". That way I can share the modem with the whole network. There doesn't seem to be a good way to use the Tilt internet sharing with the whole network. What do you guys think?
Deleted.....
For any future readers of this thread: I put the stock AT&T rom back on this phone and did a soft reset during the initial boot to stop the bloatware from loading. I went to start>settings>connections and tapped the wireless modem icon to open the app. I selected "usb" and tapped done then plugged the usb into my computer. My win xp computer found the new modem hardware and installed the HTC modem driver. I then setup a new dialup connection on my computer, and used the following to setup the login and dial:
username: [email protected]
password: cingular1
dial #: *99***1#
When I clicked on dial, it quickly connected to the AT&T network and I had internet access on my computer! I went to a speed test website and clocked my download speed at 1.2mbs and upload at 300kbs. I then opened "my network" and started the network setup wizard. I selected "this computer connects directly to the internet" and "file and printer sharing". To make a long story short, I am now able to share the Tilt's HSDPA internet connection with my whole network! I could not do it using the internet sharing function of the Tilt with either the AT&T rom or the kaiser rom. It would be awesome if someone more educated than me could make this function part of the HTC kaiser rom.
Nojnaworb wrote:
.....the problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way.......
I have same problem. I agree with Nojnaworb, this is the reason why its not working.
I have no Wifi at home and have to use LAN for my home network (2 PC + 1 ppc).
Under WM5 it was easy to share Internetconnection with all Lan adapters.
I cannot believe there is no way.
PLS Networkexperts, tell me how to setup !!
Its really quite simple.
You dont connect all the computers to the tilt. You use ICS on the tilt to provide one pc with an internet connection.
You then share the internet connection from that pc to the other pc's using the networking wizard.
I think part of this persons problem was that he needed to bridge the 2 connections.
here have this.
http://www.windowsnetworking.com/articles_tutorials/wxpbrdge.html
You should be able to connect the Tilt, (let it use whatever address it wants) and then make a bridge from the tilt to your nic in the server. Then I beleive you just use internet connection sharing to disperse the lovely packets to the rest of the network. Without the bridge, there is no way to share from one network to another.
I'm pretty sure that you will need to set the address to 192.168.0.2 on the server or any other number were the 2 is. If your using a router then I would suggest turning off dhcp and not using the WAN port on it. Just treat the router like a switch/hub because it will just makes things even harder to figure out.
wish we had service that was worth sharing to my network.

Can you access the internet when connected via ActiveSync?

With my trusty old Ipaq 5550 i could, but for some reason i cant with my Kaiser.
I had a look in the manual but couldnt find this.
Any tips?
It should work automatically.
Perhaps in your comm manager, active sync is greyed out and needs to be enabled.
Or perhaps in your configuration screen: connections tab, usb on pc (or sometinglike that), you can (un)check a box about advanced network connectivity.
yes for me work You must change in Connections->Advanced->Select network first field where you have your ISP to My Work Network.
Stay0Puft said:
perhaps in your configuration screen: connections tab, usb on pc (or sometinglike that), you can (un)check a box about advanced network connectivity.
Click to expand...
Click to collapse
EXACTLY.
Mine was checked, once i UNchecked it. I had internet conectivity.
I have all default and CHECKED use advanced network functionality and it works fine, even when syncing over bluetooth I can get to the internet through ActiveSync
Thanks, been wanting to do this for ages.
Now I have got it working.
Okay, this is a long message but I have had a unique problem in which I had to fiddle with activesync and my PDA for several days to figure it out. So in case this is your problem look here.
Scenario:
At my work we have a proxy server. When i connect my phone to my computer, even though activesync and my PDA are set to connect properly neither my phone nor my computers internet works. I fooled with this, posted on the forums and finally found a way to fix it.
Steps:
1)Change your PDA's advanced network settings in the network management area to BOTH be "mywork network". Do this before plugging in to activesync.
2)load an internet page with streaming content, or constantly refresh a web page if your work blocks all sites!
3)Ensure that your activesync is set to connect to the "work network".
4)Plug in your phone (be sure that data is still streaming on your desktop, if an active connection isn't streaming on your desktop Windows uses logarithms to decide which connection to use as an internet source).
5)Let activesync load and syncronize. Once it is syncronized, go back to your pda's network management page and change the two options BACK to MEdia Net or whatever data service you use on your cell phone. NOTE: Be sure that media is streaming all the way until you change your PDA's options BACK to the proper internet source for your phone and test it by loading a web page. Once the phone is set as it's own internet source and the desktop still has it's active LAN connection you should be golden.
I know you shouldn't have to do this but at least with my works network and their proxy server if i don't do it this way i will NEVER be able to use the internet on either device.
The reason for this is because of Microsoft's crappy network capabilities. In activesync 4.0 + they made activesync use an actual network connection, you can view it via the network connection page. So with some networks (not all) it tries to use your phones connection as the active internet network and vice versa at times.
Hope this helps somebody out there as this drove me nuts!
So far i'm the only person that has had the problem (on this forum, at least that has responded to my threads). But i'm sure there are a couple other people that have annoying problems with their work and activesync.
Thanks,
Luke
Thanks a lot alaiwy, worked just fine for me!
For the AT&T Tilt & AT&T ROM's you also need to disable the Proxy.
_Dejan_ said:
yes for me work You must change in Connections->Advanced->Select network first field where you have your ISP to My Work Network.
Click to expand...
Click to collapse
TY I was looking for this finally becuase that was getting very annoying as hell to me.

Slingbox troubles

Can I talk to an AT&T Slingbox user.
I need some serious help.
X
Sure, what's up?
att slingbox user here too. whats your problem? problems that i have had with it were the internet settings werent correct, or it was something with my router and internet connection at home.
Thanks guys,
OK. I just can't get connected. It is killing me. My router is fixed...I talked with Slingbox support and we were able to get it set up to pass through my second router, he was able to connect to my Slingbox.
I'm on Dutty's latest and I just cannot get connected to save my life.
First, the hidden proxy. Do we remove it or restore it?
I have a two router set up. -Do U have the Regestration Key Number?
If so read on....if the answer is no and not hooked to PC call Sling and have them connect first. Then read on.
Now that your PC is connected (two SOLID red dots on Slingbox and watching on your PC) you can connect your mobile device.
-First did you buy the Registration Key ($29.99 on their website?)
-If you have the key.....Did you set up the software on your mobile device?
-Download from here --> http://downloads.slingmedia.com/go/us
-Now that you have both the Key and the software loaded you should be able enter the info under Player>Slingbox Directory>Sling Mobile>Add new Slingbox / or Properties and adjust/enter.
to connect and watch away!
Hope this helps and I should be on for a little. GL
~22~
Did you uncheck the proxy in connection settings?
Two router setup?
Why the two router setup? UPnP may not be working or not enabled in the router(s).
Did you setup port forwarding? Port 5001 I believe, forward it to the ip addy of your slingbox which by default is 192.168.1.237. If you setup port forwarding, then UPnP will not be needed.
I just got my Schwingbox last weekend and I *LOVE* it. Its awesome over my WAN, great over the internet, and can somtimes even watch passable video over the EDGE network. Sadly, 3G is nowhere near my area.
It really surprised me how well the slingbox does, even with all the probs the Kaiser has with video. BTW, slingbox is aware of the HTC video probs but so far has not even tried to improve or refine their code ala Coreplayer.
Also, you do not need to a registration key to use the software, it is free to try for 30 days. Also make sure you downloaded the correct version of Slingplayer Mobile. There are two versions, one for smartphones and one for Windows Mobile 6.
Only set up I was faced with...
Nick said it the best above!~
In my current location (Garden Apt) Modem upstairs on first floor the 4 first port router is also upstairs. 2 of thoes ports are hard wired ro PC's in that room that are always in use. the other 2 I ran (bout 120 feet of cable) to the basement where my PS3 and my PC are located. Now I need a Slingbox port!!!!! Second router acts as a hub and relays my pc and the Studbox!
In my opinion I like things hard wired....just the way I am. Nothing against wireless set ups.
Love the Slingbox/DirectTV set up I have going plus with Dutty's ROM's and the right radio for the midwest I have excellent batt life and charge. Slingbox is the way to go!
~22~
You do want to disable hidden proxy for sure. I use my Kaiser to Sling via WiFi at home and 3G while away. I use it with the Classic, HD and Solo boxes with no issues. You may need to set an outgoing port for the SlingBox manually (I had to do it manually on my Netgear router).
If you set up the box and connect to your home PC and use the same PC to active sync and install the mobile player onto the Kaiser, then the SlingBox id number will be automatically set on the Kaiser.
URPREY said:
Did you uncheck the proxy in connection settings?
Click to expand...
Click to collapse
Yeah unchecked the proxy.
It was working on Easter weekend just fine.
Now, not working. grrr
If it was working before, and you can watch it through your PC, then uninstalling it on your phone and reinstalling it through the PC setup where it automatically sets up all the options on your phone should work.
Raider77 said:
If it was working before, and you can watch it through your PC, then uninstalling it on your phone and reinstalling it through the PC setup where it automatically sets up all the options on your phone should work.
Click to expand...
Click to collapse
I just reset it up my remote viewing on a whim and it worked.

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

Categories

Resources