[ROM] liberated snapvue + GPS WWE 1.22.405

[ROM] liberated snapvue + GPS WWE 1.22.405 - Shift Development

Ok, as promished, here is the new rom. I just post the link in a text file, cause I want to see the counter running
It's a standard snapvue, liberated, with the following ehancement:
Screen rotation in settings
GPS in snapvue side
Full iexplorer, notes, images, messenger,windows live.
HTC X-button 1.5
HTCGPStool
DotFred's TaskManager
USBtools for connecting to vista
A few htc blocages removed
I've tested the sound. the gps fix, and vista connectivity. Be sure to use high performace power mode for best results. It's still beta until everyone confirm it works ok. DOn't flash it if you are afraid of dark.
My radio is 1.58.21.23, so it should work on all european shift. North americans have already the gps included anyway.
To install, run customRUU AS ADMINISTRATOR on a HardSPL shift
FAQ:
- Flash is not working, it stops at 0%
You dummy boy forgot to hardSPL your shift. Look in the forum for HardSPL by cmonex
-Flash is working, goes until the end, but I get an old rom
Try launching customruu from a new folder with a new name. It's a bug under vista
- GPS does not get a fix
Sorry. Get outside, in the middle of a field, and wait. You will get a fix.
- I want GPS under vista too
It's a software problem. I'm using franson gpsgate on both side, using an activesync solution. There are other way.
- What took you so long to release this
Well, I'm like you, I waited for a rom, and since nothing came, I've started doing it myself. It took me one week.
- It mean you are against shift project
No, Thanks to their help, I can flash roms on my device. I'm actually in regular contact with cmonex. We both think more rom is best for everybody. Shift project will release quality rom on it's agenda.
- What will you do next
I'll go for screen problems I want games to work on this. After,I'll try and see the SD card, the phone, the BT and the wifi
-Wait, SD card is higher priority to me
Well, I just start where I think it can be easier to sort thinks out.
- Why don't you release a cab for the GPS like you did
Because one of the driver responsbile for linking with the sound is loaded at boot time. Try changing this on you own, and you'll have to hard reset. Only way to change it is a custom rom
- I have function X that doesn't work
Does it work after a hard reset? If not, please post how to redo it on my device
- My girlfriend left me since I flashed this rom
You forgot to HardSPL her. It's your fault
- I want program X added to the rom
Maybe if I see it as a great improvment, othewise, you should learn to cook rom yourself

Error
You want to download the following file: http://rapidshare.com/files/140029542/Snapvuegps.rar | 38403 KB
Currently a lot of users are downloading files. Please try again in 2 minutes or become a Premium member
Please note, the server is not going to check again within the next 2 minutes if downloading is possible again. To provide a fair platform, all user get the same options. Your last attempt was 21 seconds ago.
Ho hum.
Edit - 10 mins later, still no joy from Crapidshare. I look forward to checking your Rom out when it can be downloaded from somewhere else.

Thank you, the test, hopefully fix the mistakes that I sound when installing the GPS.Buena work, cordial greetings

yes!!!
very good job!!
sound an gps working thats great!!!
programe folder is well organised (i love the subFOLDER)
this is the first cooked rom, tece one is good but not realy cooked.

just a question i can see x buton under setting /system but holw to use it on today screen?

Pantaloonie said:
Error
You want to download the following file: http://rapidshare.com/files/140029542/Snapvuegps.rar | 38403 KB
Currently a lot of users are downloading files. Please try again in 2 minutes or become a Premium member
Please note, the server is not going to check again within the next 2 minutes if downloading is possible again. To provide a fair platform, all user get the same options. Your last attempt was 21 seconds ago.
Ho hum.
Edit - 10 mins later, still no joy from Crapidshare. I look forward to checking your Rom out when it can be downloaded from somewhere else.
Click to expand...
Click to collapse
If somebody wan'ts to help pantaloonie, feel free to do it. I'm currently on a quota based connection, So I want to keep my precious bits until end of month

nicolas.maigne said:
just a question i can see x buton under setting /system but holw to use it on today screen?
Click to expand...
Click to collapse
Some stuff still has to be liberated the old way. Feel free to advise your registry edits for the next version

Thanks, but it worked a few mins later. I'm just too impatient.
Finally a reason to install HardSPL on the Shift, I was too lazy to liberate it again so held off until now.

What about non-English keyboard layouts? Are they supported in this new ROM?
If so, I'll download tomorrow in the office, at home it's only GSM...
Thank you all for making a little great machine even better!

I can try and make non english layout, but I need different languages to do this. I'm going to try with german, but I'll need other languages files too.

Thanks !!!!!, perfect, brilliant, fantastic!, GPS and full sound .... now only the issue of lack Snapvue to 96dpi or 128dpi, it appears that the CommManager cut, broken, je, je, je, je ... very good job, just missed the soft reset button, but it will be for the next one. Thanks !!!!.

soft reset is in task manager menu. But you can make a shortcut to it. I'll add it in next version.

forgot to add cab support. You can edit registry for this. This will be added in next version

thaihugo said:
forgot to add cab support. You can edit registry for this. This will be added in next version
Click to expand...
Click to collapse
That caught me out for a minute too. For those who are stuck, use the registry editor in the Task Manager, and navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here.
Thaihugo - it's looking good so far, just tweaking it up now. GPS works perfectly.

TERRIFIC!!!!
Thanks

Gracias, gracias

Dear ThaiHugo, thank you for your development time given to the shift community.
Its nice to see some movement on the forums.
I have a north american shift, as stated above it includes the gps, but should i try and use this rom?.
Last but not least, aside from being liberated and IE,WMP,Notes ect installed in it, is there any difference from the usa rom version?.
---Any input would be gladly appreciated. thanks in advance.....

4all said:
Thanks !!!!!, perfect, brilliant, fantastic!, GPS and full sound .... now only the issue of lack Snapvue to 96dpi or 128dpi, it appears that the CommManager cut, broken, je, je, je, je ... very good job, just missed the soft reset button, but it will be for the next one. Thanks !!!!.
Click to expand...
Click to collapse
96dpi and 128dp are possible. I am using Realvga...works terrific.
you can grab it off my server
RealVGA_11.CAB
ResPack128dpi.ARM.CAB
96dpi is a little too small, trust me...youre going blind.
@Thaihugo... Gute Arbeit..weiter so (Deutsche Gruendlichkeit)
If you need a server to host your roms, let me know. My server is fast and permanent

great job, keep going guys, this is the only way to go further in shift converting it from an expensive paperwight to a real good phone

thaihugo said:
I can try and make non english layout, but I need different languages to do this. I'm going to try with german, but I'll need other languages files too.
Click to expand...
Click to collapse
As I'm very very very very (etc.) interested in Italian keyboard layout, could you please tell me which file do you need in order to build an "italian-like"-cooked-ROM?
Thanks

Related

(Updated 23.11) Final Touch-IT v3.0 3 versions in one package for p4350

Ok guys, as I promised im releasing my final rom
EDIT: I added a RUU_signed.nbh as seperate download, its the full cube version, but beware, its only for those who have updatet their device
with hard-spl, for more info, scroll down to bottom of this post.
But please read
Dont do this:
Questions on why stuff has been removed, and why I didnt do this or that.
Questions related to ppl using WING, TERRA and other Herald devices then P4350.
Questions on other languages, there will be no other languages released
Remarks about disliking stuff in the rom, and w/e..I dont care what you like or not.
Remarks on that previous roms are worse/better then this one
Remarks on that some ppls recooked versions of my roms are better.
Stick to posting about what is in the rom, not what is left out.
Dont ask how to flash this, its in the Touch-IT folder as a read me.
------------------------------------------------------------------------------
Ok this is final version of WWE Herald P4350 based on kaiser OS build 18125.0.4.2
No screens, there is no big diffrence in apperance.
You get 3 versions
Full with Touchflo and the cube
Full 2 with Touchflo and no cube
Lite with TouchFlo and no cube etc
This is whats in them:
Full:
Touchflo w/cube
TF-Settings
Touchflo settings 1.22
HTC Home 2.0.814.722
Comm Manager 6 tabs
RomSettings
ArcSoft MMS 4.2.8.1
Battery Status 218
Glossy Black Bars
Hibernate
HTC Network Wizard
HTC X Button 1.5
HTC Album
HTC TouchDialer
Magic SS
PIM Backup 2.5
SMS Backup
Total Commander 2
Touch-IT skin to WMP
Adobe Flash Lite
Full 2:
Same as Full, but without:
TF-settings
Touchsettings 1.22
Cube
Lite:
Touchflo, no cube
Comm Manager 6 tabs
ArcSoft MMS 4.2.8.1
HTC X Button 1.5
HTC TouchDialer
Removed from all roms:
Transcriber
Live messenger
Unusefull gifs, but some are still in
Ringtones
Default themes
jpgs
pngs
htc regedits
Tweaks
Disable sms sent
Today items removed (Not calendar)
Sliding sound off
Backlight set to 25 on keyboard
Hide SIM contacts to avoid duplicates
Security set to OFF
And other tweaks, but thats Touch-IT secrets
NOTE:
I dont have the p4350 anymore, so I could not test the roms with touchflo and no cube.
But they should work
Instructions how to upgrade is in the Touch-IT folder.
READ IT.
If you dont, you will spend even more time infront of your computer flashing the official ruu before trying again, why waste time, use 1 min to read and understand.
Remember:
If you dont like what I have added, or what I have removed or w/e please dont spam this thread with lame comments.
Disclaimer:
I take NO responsebility if you brick your device, if you do search the forums before you come flaming me/us here at XDA.
IF you brick your phone (Brick=the phone can be used as a building brick, or maybe a paperweight? Because you cant start it up.) Its no others fault but your own.
Mainly the reason for bricking a phone is:
1. Not reading the instructions good enough
2. Not following the instructions.
3. Not having a RUU that can unbrick the phone (the official installer with the official rom for your specific phone, with your phones default language. In.ex if yu have a german phone by default, you need a german RUU, if not you will get invalid vendor error)
4. Not reading the instructions good enough..again
5. Not following the instructions...again
If you dont understand after reading CAREFULLY, then dont bother flash your device with this or any other rom.
Download:
Sendspace
Megaupload
DOWNLOAD RUU_SIGNED.NBH - ONLY FOR PPL WHO HAS UPDATED THEIR DEVICE WITH HARD-SPL, FOUND HERE
DO NOT SPLIT UP AND POST THIS PACKAGE IN SEPERATE FILES.

Wow, dude. Awesome. And just in time for me buying my P4350 monday (or tuesday possibly). Not having tried flashing before (but already having read the instructions several times, even though I haven't actually got a phone to do anything on), I don't know the quality of your roms - yet I presume from what I have read that they are quite good indeed.
So thanks for your work on the roms, even though the P4350 isn't exactly new.
Just out of curiosity, is it WM5 or WM6 it's built upon? I can't seem to locate that fact anywhere in your post, but I might have overlooked it for some mysterious reason.
EDIT: It seems I was a bit too quick to post the latter about me not finding the information. I googled a bit and it seems that Kaiser OS of that build mentioned above is indeed WM6. So I guess I answered my question myself
EDIT 2: First (or well, second), I guess?

glad to hear that you're still doing work for us. I can't wait to put this on my phone.
thanks mucho.
debdrup said:
Just out of curiosity, is it WM5 or WM6 it's built upon?
Click to expand...
Click to collapse
ITJE said:
...OS build 18125.0.4.2
Click to expand...
Click to collapse
from that, i'd gather that it's WM6. Same as Toutch-IT 2.3

At last!
I am so excited while dowloading the files.
This is the best way for saying bye!
Itje, we will certainly miss you.
Regards,

when the german translation will come?

mxstyles said:
when the german translation will come?
Click to expand...
Click to collapse
never, there is a german version based on the official. There will be no other versions of german or other languages on this build

itje said:
never, there is a german version based on the official. There will be no other versions of german or other languages on this build
Click to expand...
Click to collapse
well, i have flashed the german version, but i can't use the cube in this build.
can you say me how to use it?

mxstyles said:
well, i have flashed the german version, but i can't use the cube in this build.
can you say me how to use it?
Click to expand...
Click to collapse
No
Stick to posting about this rom.
Dont reply to this, and dont post other stuff then about this rom.
thx

Hm, maybe this should be stickied. Easier to find it, as it seems to be the final version ever to be released.
I am however curious, itje. What if bugs pop up, will you be fixing those? Depending on their size and reach of the bug, of course.

hello itje,if i found a language pack french,with these release,work??

maxpaynemafia said:
hello itje,if i found a language pack french,with these release,work??
Click to expand...
Click to collapse
Well, it might work. If you find a language pack that works on wm6 then it might. Why don't you try it out? Just make a backup, flash, see if it works, flash back to your current rom and restore your backup. I'm sure it can't be that hard.

UAHUUUUU
I love the "READ ME-How To Upgrade" file
I love the new (light coloured) splashcreen and theme
I love everything man!
It is dumb saying so since it is the last version but this is the best release!
Installation went smooth! I really hope that this time everybody reads carefully the readme file since the package has the select OS feature.
Itje, come back to the herald whenever you want. I read somewhere that kaiser was way worse than Herald... I would think it twice

Great rom itje... I've founda little bug that becomes annoying when using CommManager: when I try to slect Settings -> Wireless lan nothing happens :?

BRSG said:
Great rom itje... I've founda little bug that becomes annoying when using CommManager: when I try to slect Settings -> Wireless lan nothing happens :?
Click to expand...
Click to collapse
I dont know what cause that, I used this rom before I sold my herald. And I used wireless lan settings with it.

Weather problem fixed

tesorero said:
I love the "READ ME-How To Upgrade" file
I love the new (light coloured) splashcreen and theme
I love everything man!
It is dumb saying so since it is the last version but this is the best release!
Installation went smooth! I really hope that this time everybody reads carefully the readme file since the package has the select OS feature.
Itje, come back to the herald whenever you want. I read somewhere that kaiser was way worse than Herald... I would think it twice
Click to expand...
Click to collapse
thx
Kaiser way worse? Never heard sutch bull****
My tytn2 is the best device/phone I ever held in my hands.

So does this rom have the keyboard and stuff working correctly? I think it was a problem in the past, if I remember right. Just curious because I just had to hard reset my phone because it's being stupid, so if this rom is (close to) bug free, I will probably flash to this instead.

mikeybags said:
So does this rom have the keyboard and stuff working correctly? I think it was a problem in the past, if I remember right. Just curious because I just had to hard reset my phone because it's being stupid, so if this rom is (close to) bug free, I will probably flash to this instead.
Click to expand...
Click to collapse
If you have a P4350, and its default language is english. There is no issue
What messed up with soft keyboard was the softkeyboard from touch dual, and I didnt include it in this release.
If you want it, get the cab. The same applies to other programs that ppl wants that is not in this release.

itje said:
If you have a P4350, and its default language is english. There is no issue
What messed up with soft keyboard was the softkeyboard from touch dual, and I didnt include it in this release.
If you want it, get the cab. The same applies to other programs that ppl wants that is not in this release.
Click to expand...
Click to collapse
To be honest I don't really know what touch dual is, so I'm sure I could do without it. I've been running the regular t-mobile rom with just the page pool change and a few programs (htc home, etc), and suddenly started getting this problem where my send button didn't work right and my phone would make some weird noises. I just did a hard reset and it seems to have fixed that, so while I'm at it I might as well add a nice new rom.
I know you've been working on roms for quite a while here, and I was holding off because of not wanting to re-do everything, but now since I had to start fresh, I might as well add something like this.
Thanks for all of the hard work you put into this stuff. I'm definitely going to give it a try.

mikeybags said:
To be honest I don't really know what touch dual is, so I'm sure I could do without it. I've been running the regular t-mobile rom with just the page pool change and a few programs (htc home, etc), and suddenly started getting this problem where my send button didn't work right and my phone would make some weird noises. I just did a hard reset and it seems to have fixed that, so while I'm at it I might as well add a nice new rom.
I know you've been working on roms for quite a while here, and I was holding off because of not wanting to re-do everything, but now since I had to start fresh, I might as well add something like this.
Thanks for all of the hard work you put into this stuff. I'm definitely going to give it a try.
Click to expand...
Click to collapse
so when you got the t-mobile version, I assume you got the wing?

RamROM 1.00 --> 1.22WWE + GPS (thaihugo base)

I used thaihugo ROM as base for this. Thanks to thaihugo for providing this.
I added GoogleMaps, YouTubePlay, VicSoft Clear Temp, Adobe Reader LE for Diamond. Replaced current USBTool with modaco ShiftPack.Liberate. This fixes the Registry setting needed to install cabs. The only registry setting you need to do is changing HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CurLang value to your keyboard. You can find those values in plirom 2.00 thread.
I have also placed links to USBTool under Programs\Comm (thaihugo ROM has here) and also under SnapVue Settings (ShiftPack.Liberate does this). Here in SnapVue Settings you will see a link to SoftReset too. This is exactly what Shift.Liberate does currently whenever you liberate using modaco's procedure.
Memory:
Free Storage: 28.58 MB
Free Program: 21.21 MB
Here is the link to download RUU_Signed.nbh
Use CustomRUU.exe that is available in thaihugo and plirom threads.
The next upgrades to this ROM are HTC Voice Recorder, once I figure out how to enable the microphone, .NET 3.5, Screen Capture, and HTC official YouTube Player replacing YouTubePlay. I am also planing to remove original calculator with 1-Calc.
Disclaimer: This is a cooked ROM and is supported by neither Microsoft nor HTC. Neither I nor the ones from who I learned how to cook should be held responsible for any malfunctions or irreversible damage that may cause by flashing this ROM to the device. Use at your own risk. Bottom line, I take no responsibility for the damages that may happen to your device by flashing this ROM.
Thanks
Ram

GPS from Windows Vista
Thanks to everybody i wish to thank every body who help me, and ask you for explain me how can i connect that GPS from Windows Vista.

hkesunny said:
Hi Ram,
The GoogleMaps version is not the update one in your Rom. Could you put the update one (ver. 2.2.0.19) in your next upgrades?
Thanks.
Sunny
Click to expand...
Click to collapse
Sunny
I will do that. I am working CHT version of the same. In that I will put GoogleMaps 2.2.0.19.
Thanks
Ram

martiare said:
Thanks to everybody i wish to thank every body who help me, and ask you for explain me how can i connect that GPS from Windows Vista.
Click to expand...
Click to collapse
Hi Martiare
There are two ways
1. you could use external bluetooth receiver that your vista side could use to connect using BlueTooth or USB, easiest and fastest way of doing it.
2. If you wish to use internal GPS of Shift then, you need to install either thaihugo's ROM, pliROM or RamROM, which can be downloaded from this forum (search is your friend). Once you install them, you have multiple options, but the one I use is using Franson's GPSGate Client for Vista and WinMo. I bought this for $49 and I feel good investment. Install GPSGatePPC on WinMo side, and GPSGate on Vista side. Configure GPSGatePPC to work on ActiveSync. Configure GPSGate to receive signals from ActiveSync. And install Maps software such as AutoRoute or Micosoft Streets, Earthmate etc. on Vista side and thats all.
Thanks
Ram

saiweb said:
I used thaihugo ROM as base for this. Thanks to thaihugo for providing this.
I added GoogleMaps, YouTubePlay, VicSoft Clear Temp, Adobe Reader LE for Diamond. Replaced current USBTool with modaco ShiftPack.Liberate. This fixes the Registry setting needed to install cabs. The only registry setting you need to do is changing HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CurLang value to your keyboard. You can find those values in plirom 2.00 thread.
I have also placed links to USBTool under Programs\Comm (thaihugo ROM has here) and also under SnapVue Settings (ShiftPack.Liberate does this). Here in SnapVue Settings you will see a link to SoftReset too. This is exactly what Shift.Liberate does currently whenever you liberate using modaco's procedure.
Memory:
Free Storage: 28.58 MB
Free Program: 21.21 MB
Here is the link to download RUU_Signed.nbh
Use CustomRUU.exe that is available in thaihugo and plirom threads.
The next upgrades to this ROM are HTC Voice Recorder, once I figure out how to enable the microphone, .NET 3.5, Screen Capture, and HTC official YouTube Player replacing YouTubePlay. I am also planing to remove original calculator with 1-Calc.
Disclaimer: This is a cooked ROM and is supported by neither Microsoft nor HTC. Neither I nor the ones from who I learned how to cook should be held responsible for any malfunctions or irreversible damage that may cause by flashing this ROM to the device. Use at your own risk. Bottom line, I take no responsibility for the damages that may happen to your device by flashing this ROM.
Thanks
Ram
Click to expand...
Click to collapse
First of all let me thank you and all other "cookers" for your continuous effort. I've been following the birth and the growth of quite a high number of ROM's, and I still can't understand if it's a good or a bad thing... I mean: surely everyone that flashes a newly cooked ROM acts as a beta-tester for the "chef" and for all other users that don't dare or simply can't flash a new ROM each week. Moreover each new ROM, even if adds some (in)compatibility problem, solves many others (just think about the possibility to use GPS). And this is the good part of the situation.
On the other hand I feel a bit confused. Each new ROM has many good things, but lacks in others, IMO. I know it's a matter of personal taste, but for instance I would really like that PliROM's home could be the standard for each other ROM. And that's just one of the things that I (and each one of us) could point up.
May I suggest to write down a list of the components and let a survey start? If 90 people over 100 should prefer PliROM's interface instead of original Shift one (again: it's just an example), why to continue developping ROMs with other interfaces?
I say this because I'm absolutely unable to cook anything, and I think that many of us can't.
Of course I'll go on flashing new (stable) ROMs, trying to beta-test , at least for a few weeks... than I'll have to go back to work and I wouldn't run the risk anymore to loose data or hardreset

Pure Snapvue
Hi Sai ;
Even though the user interface is really limited , i -personally- prefer using snapvue ...
So ... is there a way for you to
-either let me know how to disable the top bar with the start menu on your liberated rom
or
-cook a rom only cab-install and gps enabled , so that i can go on my own way...
My very best regards
Safak

saiweb said:
Sunny
I will do that. I am working CHT version of the same. In that I will put GoogleMaps 2.2.0.19.
Thanks
Ram
Click to expand...
Click to collapse
Hi Ram,
Thanks a lot! If you can cook the 2nd CHT version with the updated GoogleMaps will be perfect! One more request, can you use pli6128's plirom v2.00 WWE 1.22.405.0 96dpi to cook the CHT 2nd version? Because I tried and feel it's user friendly and the key buttons for both contacts and programscan be address. Also, I found it stable too.
Thanks.
Sunny

saiweb said:
Hi Martiare
There are two ways
1. you could use external bluetooth receiver that your vista side could use to connect using BlueTooth or USB, easiest and fastest way of doing it.
2. If you wish to use internal GPS of Shift then, you need to install either thaihugo's ROM, pliROM or RamROM, which can be downloaded from this forum (search is your friend). Once you install them, you have multiple options, but the one I use is using Franson's GPSGate Client for Vista and WinMo. I bought this for $49 and I feel good investment. Install GPSGatePPC on WinMo side, and GPSGate on Vista side. Configure GPSGatePPC to work on ActiveSync. Configure GPSGate to receive signals from ActiveSync. And install Maps software such as AutoRoute or Micosoft Streets, Earthmate etc. on Vista side and thats all.
Thanks
Ram
Click to expand...
Click to collapse
Ram / Martiare,
Maybe you can use this one - "Track Me"
http://forum.xda-developers.com/showthread.php?t=340667
Because it's FREE! I installed it at the WinMo side and at the Vista side I can use Google Earth see my track realtime!
Sunny

hkesunny said:
Ram / Martiare,
Maybe you can use this one - "Track Me"
http://forum.xda-developers.com/showthread.php?t=340667
Because it's FREE! I installed it at the WinMo side and at the Vista side I can use Google Earth see my track realtime!
Sunny
Click to expand...
Click to collapse
Hi Sunny
Cool.
Thanks
Ram

Hileotech said:
First of all let me thank you and all other "cookers" for your continuous effort. I've been following the birth and the growth of quite a high number of ROM's, and I still can't understand if it's a good or a bad thing... I mean: surely everyone that flashes a newly cooked ROM acts as a beta-tester for the "chef" and for all other users that don't dare or simply can't flash a new ROM each week. Moreover each new ROM, even if adds some (in)compatibility problem, solves many others (just think about the possibility to use GPS). And this is the good part of the situation.
On the other hand I feel a bit confused. Each new ROM has many good things, but lacks in others, IMO. I know it's a matter of personal taste, but for instance I would really like that PliROM's home could be the standard for each other ROM. And that's just one of the things that I (and each one of us) could point up.
May I suggest to write down a list of the components and let a survey start? If 90 people over 100 should prefer PliROM's interface instead of original Shift one (again: it's just an example), why to continue developping ROMs with other interfaces?
I say this because I'm absolutely unable to cook anything, and I think that many of us can't.
Of course I'll go on flashing new (stable) ROMs, trying to beta-test , at least for a few weeks... than I'll have to go back to work and I wouldn't run the risk anymore to loose data or hardreset
Click to expand...
Click to collapse
Hi
Sure I will use pliROM as base for the new version, or may be I will have an option that would install HTC Home like pliROM does or SnapVue like thaihugo does. I think I would go with this optional one.
Thanks
Ram

For free GPS Tracking in Google Earth, and Google Maps mobile, checkout http://www.reperion.com and choose basic, free download.
You don't need to boot vista to see your realtime tracks, all you have to do is import your Reperion KML network link to Google Mobile Maps !
It will give you much much more than just tracking... check it out
http://www.reperion.com/newclient for the software
http://geocool.reperion.com/web to JOIN for an account.

Thanks Ram and cookers!
Installed and working. Just one query about the GPS side though.....
I'm using a UK version of the shift for starters that is only a few months old. I've fllashed the Rom as above and also installed the GPSGate software on both sides. That all seems to be working fine and the WinMob side has found the GPS Module on COM4 and is receiving data but no location. After having read the other threads I appreciate you have to stand in the middle of a field for i to pick up the satellites. Unfortunately I have tried this and it still isnt picking them up. Is it possible that HTC has now stopped installing the GPS Antennas in recent Shifts (no, I haven't opened it up to look)?
Any other ideas?

saiweb said:
Hi
Sure I will use pliROM as base for the new version, or may be I will have an option that would install HTC Home like pliROM does or SnapVue like thaihugo does. I think I would go with this optional one.
Thanks
Ram
Click to expand...
Click to collapse
This sound great to me!!! Thanks a lot

meanbiker said:
Thanks Ram and cookers!
Installed and working. Just one query about the GPS side though.....
I'm using a UK version of the shift for starters that is only a few months old. I've fllashed the Rom as above and also installed the GPSGate software on both sides. That all seems to be working fine and the WinMob side has found the GPS Module on COM4 and is receiving data but no location. After having read the other threads I appreciate you have to stand in the middle of a field for i to pick up the satellites. Unfortunately I have tried this and it still isnt picking them up. Is it possible that HTC has now stopped installing the GPS Antennas in recent Shifts (no, I haven't opened it up to look)?
Any other ideas?
Click to expand...
Click to collapse
Honestly I don't know if they might have removed it. But to be sure, look if you have any data comming in. Do you have any sattelites inview when using HTC GPS util? Look at the sattelite tab.

meanbiker said:
Thanks Ram and cookers!
Installed and working. Just one query about the GPS side though.....
I'm using a UK version of the shift for starters that is only a few months old. I've fllashed the Rom as above and also installed the GPSGate software on both sides. That all seems to be working fine and the WinMob side has found the GPS Module on COM4 and is receiving data but no location. After having read the other threads I appreciate you have to stand in the middle of a field for i to pick up the satellites. Unfortunately I have tried this and it still isnt picking them up. Is it possible that HTC has now stopped installing the GPS Antennas in recent Shifts (no, I haven't opened it up to look)?
Any other ideas?
Click to expand...
Click to collapse
in HCTC GPS Tool (Settings tab) press Open Button, in the lower part you will see some scrolled text, when you run GPS software for the first time you have to wait for 15-30 minute to recieve the signals, then go to Satellite tab the no. of satellite used must be 3 or more to get your location, thise what I did, hope it is the correct way.

thaihugo said:
Honestly I don't know if they might have removed it. But to be sure, look if you have any data comming in. Do you have any sattelites inview when using HTC GPS util? Look at the sattelite tab.
Click to expand...
Click to collapse
I agree with you completely. I don't think they would have removed it. It may be some issues with the position or something related to GPSGate configuration. I also come into issues where it would take good 15 to 20 minuts to lock my Shift for the first time especially with overcast skies, evenings and inside the building. I may be wrong too, HTC might have removed the GPS altogether in the newer systems, but that would be a drastic step for HTC. If they do so, I would suggest buying RAON Everun and tether it with a Kaiser or Hermes would be cheaper. You would have a GPS receiver on your WinMo, and have bluetooth, SD, Wifi handy and you could connect your Everun to that and it fits in the pocket, eventhough the screen is nearly 5" as opposed to 7". But that is cheaper alternative and runs on more manageable XP. And installing GPSGate on WinMo and XP gives me to have the GPS on bigger screen.
Thanks
Ram

Got the GPS Tool running again. It's hovering on Sat 32 and 14 with the odd scan of no. 1 on its own. Going to leave it on the windowledge overnight as the field isn't really an option!
I'm used to using a Garmin Zumo on the motorbike that takes seconds to find the sats and TomTom on my Hermes in the car and also it's own in-built Toyota Effort. None takes this long to find satellites.
But it is fun, isn't it!!!

meanbiker said:
Got the GPS Tool running again. It's hovering on Sat 32 and 14 with the odd scan of no. 1 on its own. Going to leave it on the windowledge overnight as the field isn't really an option!
I'm used to using a Garmin Zumo on the motorbike that takes seconds to find the sats and TomTom on my Hermes in the car and also it's own in-built Toyota Effort. None takes this long to find satellites.
But it is fun, isn't it!!!
Click to expand...
Click to collapse
Yep, it is kind of slow, once you get the location fixed, and it uses 2 satellites, the things move pretty fast. I have quite a good number of GPS devices, and all of them are pretty fast when compared to this.
Thanks
Ram

So the GPS Tool locked up the WinMob side , it mustn't have liked being left on all night! Pulled the battery and reset. Hey Presto the sky is full of satellites tonight and all is working fine!!!! It takes ages to take its initial reading of where everything is, has a real good think about it and then decides to work.
Now looking forward to any future incarnations.
Many thanks to all

[29/11/08] WM6.1 for S730 in Dutch available!

Because there was no Dutch WM6.1 ROM around for the Wings, I took the liberty of building one myself. It is based on Alcalines stable 6.1 WWE ROM.
The ROM is in Dutch and can be changed to English, although I do not really see the point in doing that myself
Download
here (Megaupload)
The ROM is splash screen and os only. You will need HardSPL / CID unlocked to be able to flash it. There is plenty of information around here how to do that.
Known bugs/issues
- Time zone is at GMT right after flashing. Go to Start > Instellingen > Klok en alarmsignalen > Datum en tijd to set it to the correct time zone, 'Nederlands'. You need to be there anyway.
- Battery meter on the home screen refuses to open power control panel.
- Phone band selection screen is still in English. -> fixed in version 3
- In-call menu doesn't contain text when set to Dutch.
edit 11/12/08: uploaded a new version with total commander and oxios hibernate included. Fixed a couple of mistakes (such as the IE homepage displaying an error).
If you have any comments or discover any things that I've missed, please let me know.

Hi spone1,
Looks really cool! I would like to do the same for Swedish. Can you give some instructions how to do it?
/Peter

petersa,
This is how I did it:
- Get a stable base ROM to build from (Alcaline's ROM in my case)
- Find a WM6.1 standard ROM that contains the Swedish language files (mui files)
- Copy them over to the base ROM
- Tell the ROM there are additional languages available (adding a MUI, making sure that the XT9 is set, for Swedish there might possibly a different keymap needed, don't know).
- Rebuild and flash, test
...
- Profit

Thanks!
Could you elaborate a little on the "Copy them to the base ROM" and "Rebuild and flash"?
If I find the MUI files can I simply just put them in the right folder on my S730 or do I have to build a new ROM and flash? If so, do you have any links how to build a ROM?
Sorry for all questions but I'm a newbie to ROM cooking...
/Peter

Take a look at http://wiki.xda-developers.com/index.php?pagename=HTC_Vox, it is for the Vox but Wings is more or less the same. I would appreciate it though if you'd make your own thread from now on instead of hijacking mine

Nice try, but if I change the language to English I cannot use the keyboard. Always the FN is on, but the led is off. Strange.

Can you please be more specific? Where did you change the language? Regional settings?
edit: just tried switching the phone to fully US English with English time settings and such, and it works fine. But maybe I am testing the wrong thing. You might want to try an additional hardreset?

spone1 said:
Can you please be more specific? Where did you change the language? Regional settings?
edit: just tried switching the phone to fully US English with English time settings and such, and it works fine. But maybe I am testing the wrong thing. You might want to try an additional hardreset?
Click to expand...
Click to collapse
I have flashed the rom (very easy, allready had hard spl). After that the rom booted and I did go to the settings and changed the Regional Settings Language to English. After that I tried to setup an e-mail account, but that didn't work. Sending a SMS didn't work too, both times I couldn't get letters.
Ofcource I rebooted the phone several times, but didn't work If you need more info, PM me for Dutch

Thanks for your help spone1
/Peter

translate xuque's last rom
hoihoi,
Can somebody translate the rom from this tread in post 4 to dutch?
If it is all about MUI files and one registry setting, than why is so difficult too made one international rom?
just asking, I'm totally no cooker, have tried it in the past, but it's too difficult for me. and I'm scared for f*cking up my phone.
groetjes,
Niels

What are the advantages over, say, Alcaline's ROM? Yes I know that some things are a newer version, but what makes it better and worth to spend my time on

NICE! Great job

Phone Functions missing
Hi Spone,
I've made use of your version and finally my 730 is stable and usable. Thanks.
But I now miss two functions to optional use during a call:
-Mute
-Speaker
Is there anything available getting these functions back.
HLN

Hmm, now you say so. As far as I can see something went wrong with the translation leaving us without a menu to use these functions. I'll look into it.
Concerning the mute function, probably not entirely the same but if you press the center button on the D-pad the call is put on hold.
edit: nevermind about that last thing, just read your PM

thumbs up
Great job spone!
Took the step this morning and flashed your rom. Works like a charm.
Besides a little lag at startup when inserting pin and a few English words here and there (e.g. at profiles) this is definitely the best solution for the Dutch S730-owners.
Thanks a lot

spone1 said:
Hmm, now you say so. As far as I can see something went wrong with the translation leaving us without a menu to use these functions. I'll look into it.
Hi Spone1
Your ROM rocks.... but I really miss the speaker option. Any news on this?
Click to expand...
Click to collapse
Click to expand...
Click to collapse

I've been looking at it, tried replacing files but it doesn't seem to pick it up
Currently I dont have the time to investigate it any further, I might in the future. Coming up with a possible new solution, editing, flashing, testing takes quite some time When you set the rom to english though, it actually does display the text. Anyone with a hint?

Great job!!!
My s730 is now a lot faster and its very stable!
Thank you very much
Greatings from Holland!

nice work
After waiting for a long time (put my fear a side) to update/upgrade my phone finally I did it and...... Install went perfectly! Next job, test this nice rom. to be continued ....

HLN said:
Hi Spone,
I've made use of your version and finally my 730 is stable and usable. Thanks.
But I now miss two functions to optional use during a call:
-Mute
-Speaker
Is there anything available getting these functions back.
HLN
Click to expand...
Click to collapse
Yes indeed.
I installed it and was searching for the function, thought i was getting crazy.
Would be nice if this will be fixed, it's a real must have for your mobile.
Any progression Spone?

Ather's Dark Edition German WM6.1 with UC - Fully loaded!

Normally new ROM in this forum are as clean as possible. THIS isn't !!!
This one is really dirty. It is ALL IN there:
User customisation,
Screen Rotation Fix,
German keyboard,
Speekerphone, (freehand phoning with a single fingertip gesture)
NET 3.5,
Opera Mini 4.2 German as Default Browser,
Screen Capture and Audio Recorder,
Phone Logging with Screen Lock Function,
HTC Home,
FTouchFlo,
SCLPC++ Cube,
Navigation,
Antitheft Software with GPS Detektion,
WLAN and WIFI, Wardriving and GPS Software.
Lots of useful freeware-apps,
and a lot of pre-installed programs and hidden features more!
The really best is a software, which is officially not released for Windows Mobile! Designed to run on at least 32MB, it is working fine on 17MB of free ram-memory!
So, please: Do NOT use this thread to ask for help on this proggis, better PM me.
Enjoy - don't talk!
Always try the ROM together with the UC. Without it, it doesn't rock, as it should!
To install:
Copy the folder Speicherkarte to a clean SD-card. (At least 1GB) and insert it into the device.
Uprade as normal, after that Hard-Reset.
Important: The RAMdisk is erased!
UC stops only one time and you have to press OK.
(No need to tap OK on the mortscript-popups)
At the end of the installation, you should set the time/date and lock the keys (if you want).
At last you can config the antitheft-soft.
Good news to all the ROM-cookers of you:
Add 2 files to the ROM and the antitheft-soft is hard reset resistend!
To all others, there is a little workaround to simulate hard reset resistens with the help of UC. (As long as the SD card is inserted on hard reset.)
----------------
Now playing: Meat Loaf - Forever Young
via FoxyTunes
Thanks to ather, dkamin, (for the Base-ROM)
and Teijak (for his WM6 ROM I used till today)
http://www.mediafire.com/file/mzmjnmmm2xg Part1
http://www.mediafire.com/file/tzy2mxlvzjy Part2
http://www.mediafire.com/file/mnjmezwzhdm Part3
http://www.mediafire.com/file/fmldhmk5jlh Part4
http://www.mediafire.com/file/ymtezrtlim3 Part5
http://www.mediafire.com/file/x3tdmjuyjmj Part6
http://www.mediafire.com/file/zaduz2zeznm Part7
http://www.mediafire.com/file/kg45odddr14 Part8
http://www.mediafire.com/file/xonmumuhkmy Removed files for the cooks of you.
http://www.mediafire.com/file/zgyj2my2yoo Bonus for you all.
http://www.mediafire.com/file/ctigkqc2ihm This is the final addition
The attached Patch fixes a bug in the System folder! (see post 14)
Remember: It is nice to be important, but it is more important to be nice.(Scooter)
Thinking - helps. So: Use your brainpower, or the search button!

wow so you finally did it xD, nice work and i see you integrated the anti-theft app to
Nice work

Thanks Ather, you are right. It took me hundreds of flashes since my first recook on 7.Sept.08 to get this final version.
BTW do you know/use this Emulator to test ROM?
http://www.microsoft.com/downloads/...AF-12E3-4B2F-A394-356E2C2FB114&displaylang=en
How does it work?

nope not possible to flash ROMs onto it

ather90 Nice work

nokser said:
ather90 Nice work
Click to expand...
Click to collapse
I´m sorry. This Mod is my fault!
Have fun. 75 downloads in less than 36 h, not bad.
Can you please give me some feedback. It was a hard job, beside my family.
There are no probs? Nowhere? I can't believe it! Feel free to ask, why I did, what I did.

muckelmaus said:
Can you please give me some feedback. It was a hard job, beside my family.
There are no probs? Nowhere? I can't believe it! Feel free to ask, why I did, what I did.
Click to expand...
Click to collapse
Did noone find that is not possible to create new SMS?!?
Sorry, I think I cleaned the ROM a little bit to much.
I´m working on it. The reason I didn´t see it earlier is, that I didn't insert a SIM and I didn't try it 'till now.
PLEASE report bugs you find! It makes me angry, if my first released ROM is not as perfect as it could be.

Ok greate work

This Rom - have package

Hi muckelmaus,
thx for your work.
There are some newer program-versions "on the markt" as the ones you used,
e. g. Total Commander or Version 6 of the Navi-Software.
I have a problem with your Navi-Installation:
First I used the older Navi-SW at your ROM, no problem.
Second I am trying to use the newer one, but it gives me an error with the map which seems to be pre-installed in the configuration. I cannot switch in the newer SW to the other card on the SD nor I can end the Navi-SW on normal way.
Can it be that the 2 versions of the Navi-SW uses the same INI-File or registry-entry anywhere?

Please edit your post!
Can you please do not use original Software-names in this thread. I don't like judges, software companies can google, too.
For the map, you have to edit a file. Sorry, I forgot to share these files, that explain how.
They are coming soon, but I want to fix the SMS bug first.
Btw: There is a version of that program running on WM 2k3 devices, too. This version can handle 6.75 maps!
Of cause, there might be newer versions of special apps, but do they are so much better more powerful or do the have special features, that it is worth to change a working system. On the other hand, most of them are bigger and they won't fit. ROM is rare on Hima-systems. (Current G-maps is twice as big as the older)
The best example is the missing SMS capability, which is a result of cleaning to drastic.

Still working on bug fix! Comming asap!
Last edited by Llewellyn; Yesterday at 08:57 AM..
Thanxs, for editing your post, Did you check your PM?
You didn't download the link yet.
Still working on the SMS bug fix. The fault was created between Sept. 13 'til 26 last year, as far as I examined. Now I have to compare, what I did in between version 6.1.9 and 6.1.10. Found the missing files and 2 registry data, but there is still missing a little bit.

Now it works!
Yes, it's true. The bug on creating SMS is fixed!
So I release it now as Final Version. Look at the first post of this thread.
There is still a little bug, but it is not a special fault of my ROM, it's known as a bug, based in changing the language (to German).
The device freezes on calibrating the touchscreen.
Maybe some one can write a small app, .cab or a mort script to change the reg key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="504,517 152,249 146,786 865,789 862,259"
(Would be cool because one of my himas has a little bit funny behaviour.
Try this and you will see:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="584,499 291,239 291,763 880,757 881,241 ")
I hope, you all will have fun.
On questions or problems, please PM: "I will do my very best Ms. Sophy" "Scoll"
Cool, there was one complete download, while writing this post.
Please post your opinion or bug detections.
It is quite easy to get rid of unused proggis on the ramdisk or to save some more space in main memory.
If you are not sure how or you want to insert your own cabs, but don't know to edit cabs, it would be nice to hear from you.

Last Final Link
Look at the first post, if you want to use the left-right gesture.
Have fun. Now everything should work.
Without it, all your brainpower or the help of the search-button would be useless.

Shame on me!
There is still a wrong link in the System folder. Backup funktion is corrupt.
Download and extract the patch attached to the first post.
Copy the folder Patch to the root of the SD card and start the included Patch1.mscr to fix the wrong link.
Fixed the missing MMLauncher in a new Patch, today.

Fettes ROM
Thx Guys (Ather & Muckelmaus) - you rock my MDA Hima like 125mg MDMA
Never get lost again thx to UC (great Navi setup - works stable with my ancient Nokia ld-1w - pickup for 5€@fleemarket).
Finally got an stable Media/Navi/Tool for about 30€ - so waitin for your 6.5 adoptions - Thx again

mda_Mellowheadz said:
Thx Guys (Ather & Muckelmaus) - you rock my MDA Hima like 125mg MDMA
Never get lost again thx to UC (great Navi setup - works stable with my ancient Nokia ld-1w - pickup for 5€@fleemarket).
Finally got an stable Media/Navi/Tool for about 30€ - so waitin for your 6.5 adoptions - Thx again
Click to expand...
Click to collapse
People in this forum never, ever have any drug experience or practical knowledge of other consciousness expanding substances, than our Himas, I swear.
Nice, that you like it.

Backpack?
is this rom compatible with the BACKPACK??

Backpack hasent worked in Wm5 or Wm6.x only works in Wm2003

ElCroata said:
is this rom compatible with the BACKPACK??
Click to expand...
Click to collapse
It is compatible with the extended battery and it should be compatible with the vga-feature of the backpack.
There is a file of the Net2.0 folder missing in \Windows, sorry, I didn´t find out which one yet.
A small workaround was to copy the file(not the folders) to \windows, but this wastes memory. I´ll patch it, soon, it worked for me.
I was a little bit to radical in cleaning the ROM to get space.
I still hope, that someone finds a way to write a working driver for the cf-slot of the backpack, because I saw a working 6.1 ROM at the Magician forum by some hero without a warning or any hint that it is possible.
So, hope dies last.
See you.
BTW: ather I´ll by you a cheap new used hima, because one of mine has funny behaviour, caused by a 3600mAh battery. PM for your address, to send it.
PS: MMlauncher still doesn´t work. Sorry for that, I think it´s a hardcoded link error.

Manila 3D .cab...Help please !!

Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.

here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search

looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.

Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!

Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29

It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers

vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.

RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?

Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too

<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers

vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better

How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance

Flashing Your First Kaiser Rom (For Noobs)

click the link stylez posted, don't be embarrassed, I was there about 6 months ago

vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d

installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now

yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?

Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky

Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme

SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job

Database Develop

welcome